TMS320C25PHL - 50 MHz Fixed-Point DSP | Texas Instruments
N.º de pieza: TMS320C25PHL ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $24.1015 | $24,10 |
| 10 | $24.1015 | $241,02 |
| 100 | $24.1015 | $2.410,15 |
| 500 | $24.1015 | $12.050,75 |
| 1.000 | $24.1015 | $24.101,50 |
TMS320C25PHL Descripción general
A digital signal processor is a specialized microprocessor architecture optimized for filtering, transforms, control, and waveform analysis. The TMS320C25 belongs to the broader digital signal processor hierarchy, where dedicated multiply-accumulate hardware, parallel buses, and real-time execution reduce the overhead associated with general-purpose processors. Its 32-bit arithmetic logic unit and accumulator, 16-bit multiplier, and Harvard-style program and data organization support compact high-speed signal-processing implementations.
The verified device data identifies an 80 ns instruction cycle, 544 words of on-chip data RAM, 4K words of on-chip program ROM for the TMS320C25, and 128K words of data/program address space. The device is specifically listed as a 50 MHz fixed-point DSP and is available in an 80-QFP, 14 mm by 20 mm package according to DigiKey. These characteristics make it suitable for industrial control, communications, audio, instrumentation, and embedded DSP systems designed around the TMS320 family.
The TMS320C25 architecture combines dedicated multiplier and accumulator resources with separate program and data memory concepts. This hardware arrangement is useful when the control loop or signal-processing kernel must execute on predictable instruction timing. Designers should account for external memory timing, wait states, address decoding, and the electrical requirements of the QFP footprint when laying out the PCB.
Typical applications include digital filtering, modulation and demodulation support, motor and industrial control, communications signal processing, audio waveform processing, and embedded measurement systems. The device can be selected when an existing TMS320C2x software and hardware architecture is being maintained rather than migrated to a newer processor family.
The principal design consideration is package and timing validation. The verified sources identify an 80-QFP package, but the exact pinout, pin names, voltage limits, temperature grade, and all detailed electrical limits must be confirmed directly against the TI datasheet before PCB release or production substitution. This page combines manufacturer documentation, distributor listings, package information, and replacement-search results while preserving unavailable values as explicit data-needed markers.
Alternativas directas para TMS320C25PHL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
TMS320C25PJL
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320C25GBL
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320C26
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320C27
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320C28
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320C25PHL Especificaciones
| Product Type | Fixed-point digital signal processor |
| Clock Frequency | 50 MHz |
| Instruction Cycle Time | 80 ns |
| On-Chip Data RAM | 544 words |
| On-Chip Program ROM | 4K words |
| Data/Program Address Space | 128K words |
| Arithmetic Logic Unit | 32-bit ALU/accumulator |
| Multiplier | 16-bit multiplier |
| Accumulator | 32-bit |
| Encapsulado | 80-QFP, 14 mm x 20 mm |
| Tipo de montaje | Surface Mount |
| Core Architecture | Second-generation digital signal processor |
| Program Memory Organization | Program and data address space |
| Data Memory | 544 words on-chip |
| Program Storage | 4K words on-chip ROM for TMS320C25 |
| External Memory Addressing | 128K words |
| Product Family | TMS320C2x |
| Supplier Package Designation | 80-QFP |
Guía de configuración de pines de TMS320C25PHL 80-qfp
Configuración de pines para TMS320C25PHL (encapsulado 80-qfp). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para TMS320C25PHL.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TMS320C25PHL es adecuado para 6 aplicacións: Digital Filtering, Industrial Motor Control, Communications Signal Processing, Audio Waveform Processing, Embedded Measurement Systems, Legacy DSP Product Maintenance.
Digital Filtering
TMS320C25PHL fits deterministic digital-filter implementations because it provides a 50 MHz clock, 80 ns instruction cycle, 32-bit ALU/accumulator, and 16-bit multiplier. The processor can execute filter state updates and multiply-accumulate operations in a dedicated DSP architecture rather than relying on a general-purpose CPU. With 544 words of on-chip data RAM, compact filters may operate with limited external memory access, while the 128K-word address space supports larger system designs. Validate coefficient precision, memory wait states, and input/output timing against the TI datasheet.
Recomendado
Industrial Motor Control
The TMS320C25PHL is applicable to embedded motor-control and feedback systems requiring deterministic fixed-point computation. Its 50 MHz operating frequency and 80 ns instruction cycle provide a defined performance basis for control-loop scheduling, while the 32-bit accumulator supports intermediate results in filtering, transformations, and control calculations. The 544-word RAM may help retain control state locally, but external memory and I/O timing must be designed carefully. The supplied data does not verify motor-control peripherals, voltage rails, or temperature ratings.
Recomendado
Communications Signal Processing
TMS320C25PHL can support communications signal-processing blocks that require fixed-point throughput and predictable execution timing. The dedicated 16-bit multiplier and 32-bit ALU/accumulator are useful for correlation, filtering, modulation-related arithmetic, and other kernel operations commonly mapped onto DSP architectures. Its 128K words of data/program address space provides room for external code and data, while 544 words of RAM and 4K words of ROM support compact embedded configurations. Interface standards, sampling rates, and timing margins still require application-specific verification.
Recomendado
Audio Waveform Processing
The TMS320C25PHL can be used for audio waveform processing when the design is based on legacy fixed-point DSP software and requires a dedicated arithmetic engine. Its 50 MHz clock and 80 ns instruction cycle support time-domain operations such as filtering, sample-rate conversion, and signal conditioning, subject to the complete instruction and memory timing specification. The 32-bit accumulator provides headroom for intermediate fixed-point calculations. Audio performance must be evaluated with the actual codec interface, sample rate, quantization format, and datasheet-defined external-memory timing.
Recomendado
Embedded Measurement Systems
TMS320C25PHL is relevant to embedded measurement systems that combine sampling, filtering, and numeric processing in a fixed real-time loop. Its 50 MHz operating point and dedicated DSP datapath allow measurement algorithms to execute with predictable instruction timing, while the 128K-word external address space can hold code and data beyond the internal memories. The device is most attractive when preserving a TMS320C2x software base is valuable. Exact ADC interface requirements, voltage tolerances, and environmental limits are not supplied and must be confirmed before board design.
Recomendado
Legacy DSP Product Maintenance
TMS320C25PHL is especially relevant to maintenance and replication of existing TMS320C2x equipment. Maintaining the same processor family can reduce software migration effort and preserve proven algorithm timing, peripheral assumptions, and board layouts when the exact PHL package and pinout are unchanged. The verified 50 MHz rating, 80 ns instruction cycle, 544-word data RAM, 4K-word ROM, and 128K-word address space provide a consistent architecture reference. For repair or obsolescence planning, compare exact package drawings, timing, electrical limits, and software assumptions before committing to a replacement.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TMS320C25PHL — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TMS320C25PJL | TMS320C25GBL | TMS320C26 | TMS320C27 | TMS320C28 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Type | Fixed-point digital signal processor | Digital signal processor | Digital signal processor | Digital signal processor | Digital signal processor | Digital signal processor |
Diferenciadores clave
- Exact PHL package identity (frente a TMS320C25PJL)
- Verified architecture data (frente a TMS320C26)
- Defined external address-space capacity (frente a TMS320C27)
Notas de diseño
Use the official TI mechanical drawing to define the 80-QFP, 14 mm by 20 mm land pattern, pin numbering, and exposed-pad or lead-clearance requirements before routing. The verified distributor data establishes the package size but does not provide the full pinout or recommended PCB footprint, so do not derive pad geometry from the package name alone. Confirm pin 1 orientation, pad dimensions, solder-mask clearance, and assembly tolerances against the datasheet.
The verified architecture provides 544 words of on-chip data RAM, 4K words of program ROM for TMS320C25, and 128K words of data/program address space. Partition code and data carefully, document wait-state assumptions, and verify external memory address decoding and timing against the electrical specifications. If an algorithm exceeds internal RAM, external-memory access can materially affect real-time performance, so measure the final memory hierarchy rather than estimating only from the 50 MHz clock.
The supplied data does not provide the device supply voltage, power dissipation, thermal resistance, or operating temperature range. Those values must be extracted from the exact TMS320C25PHL datasheet and used with the actual clock activity and I/O loading. Check the QFP copper area, thermal vias, board construction, and enclosure temperature before production. Do not apply thermal estimates from another TMS320C2x package variant without confirming die, package, and test-condition identity.
External memory and high-speed control signals should be routed with the timing and impedance constraints specified by the TI datasheet. Keep clock and reset paths short, provide controlled return paths, and validate address, data, and control timing with the actual memory device and PCB stack-up. Because the supplied snippets do not include I/O timing or recommended schematic values, treat any specific resistor, capacitor, or trace-length value as unverified until confirmed in the manufacturer documentation.
The most important substitution pitfall is confusing functional equivalence with physical drop-in compatibility. TMS320C25PJL is described as a PLCC alternative, while the target is an 80-QFP, so a PCB redesign may be required. TMS320C25GBL and the TMS320C26, TMS320C27, and TMS320C28 references also lack complete package and pinout verification in the supplied data. Before procurement, compare exact ordering code, package drawing, pin names, voltage limits, memory map, timing, software model, and qualification records.
Información de cumplimiento
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for TMS320C25PHL. AEC-Q100 is marked not_applicable because this is a legacy digital signal processor, not an automotive-qualified claim in the provided data. Obtain current manufacturer declarations for the exact orderable MPN before procurement.
