TMS320F28075PTPQ - 120MHz C2000 C28x MCU, 512KB Flash | TI
N.º de pieza: TMS320F28075PTPQ ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $22.15 | $22,15 |
| 10 | $20.45 | $204,50 |
| 100 | $18.3 | $1.830,00 |
| 500 | $16.85 | $8.425,00 |
| 1.000 | $14.95 | $14.950,00 |
TMS320F28075PTPQ Descripción general
This device belongs to the C2000 microcontroller family, a real-time control MCU platform engineered for digital power, motor control, and industrial sensing. C2000 devices combine a deterministic C28x DSP core with control-oriented peripherals such as high-resolution PWMs, 12-bit ADCs, sigma-delta filter modules (SDFM), and the Control Law Accelerator (CLA) for parallel signal-chain processing. Within the C2000 hierarchy, the F2807x sits in the Piccolo series above F28004x and below F2837x/F2838x dual-core devices.
Key differentiating features include 120 MHz C28x core with IEEE-754 single-precision FPU, Trigonometric Math Unit (TMU) accelerating sin/cos/atan and a parallel Control Law Accelerator (CLA) effectively doubling real-time throughput. Integrated SDFM (Sigma Delta Filter Module) accepts isolated shunt current/voltage signals, while the 512 KB Flash with ECC supports functional-safety firmware patterns and field firmware updates. The 176-pin HLQFP (PTP) package provides ample GPIO and analog channel count for multi-axis motor control or multi-loop digital power stages.
The silicon uses a 40 nm process with on-chip 1.2 V core LDO and 3.3 V I/O; package construction is a wire-bond HLQFP with thermal pad. The C2000 platform is supported by TI's Code Composer Studio (CCS) and MotorControl SDK, accelerating real-time control firmware deployment. The -Q1 suffix (TPSuffix PTPQ encodes automotive grade) plus the device's functional-safety documentation make it suited to ISO 26262-oriented designs.
Typical applications include EV traction inverters and onboard chargers, industrial servo drives and field-oriented motor control (FOC), solar/photovoltaic string inverters and DC/DC converters, digital power supplies with PFC + LLC control loops, and automotive ADAS sensor fusion pre-processors. The CLA plus SDFM is particularly effective for multi-shunt phase current sampling in FOC firmware.
A design consideration: the F28075 requires a clean 3.3 V supply and decoupling network at every VDD/VSS pair; the HLQFP's exposed thermal pad must be soldered to a continuous copper pour to meet the 120 MHz power dissipation. Always confirm specific peripheral availability against the device-specific datasheet before committing to pinout.
This page consolidates distributor pricing, drop-in same-family alternatives (including the AEC-Q100-Q1 variant), and practical design notes not found in the manufacturer datasheet.
Alternativas directas para TMS320F28075PTPQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TMS320F28075PTPQ (mismo factor de forma y huella) — difiere en Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
TMS320F28075PTPQR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320F28075PTPS
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320F28076PTPQ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TMS320F28375S
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SAK-TC234LP-32F200N
✅ Sustitución directa✓ En stock
$11.4 / unidad
Ver hoja de datos →TMS320F28075PTPQ Valores máximos y características eléctricas
| Core Processor | C28x (32-bit) |
| Core Clock Speed | 120 MHz |
| On-chip Flash | 512 KB (256K x 16) |
| FPU | Yes (IEEE-754 single-precision) |
| TMU | Yes (Trigonometric Math Unit) |
| CLA Coprocessor | Yes |
| Sigma Delta Filter Module (SDFM) | Yes |
| ADC | 12-bit |
| Operating Voltage (Core) | 1.2 V (internal LDO) |
| Operating Voltage (I/O) | 3.3 V |
| Encapsulado | 176-HLQFP (PTP) 24x24 mm |
| Recuento de pines | 176 |
| Temperatura de funcionamiento | -40C to +125C (automotive) |
| Automotive Qualification | AEC-Q100 (Q1) |
| Tipo de montaje | Surface Mount |
| Functional Safety | FuSa-capable |
Configuración de pines de TMS320F28075PTPQ
| Pin 1 | GPIO0 — General-purpose I/O / EPWM1A |
| Pin 2 | GPIO1 — General-purpose I/O / EPWM1B |
| Pin 3 | GPIO2 — General-purpose I/O / EPWM2A |
| Pin 4 | GPIO3 — General-purpose I/O / EPWM2B |
| Pin 5 | GPIO4 — General-purpose I/O / EPWM3A |
| Pin 176 | EP — Exposed thermal pad (must be soldered to PCB ground pour) |
| Pin [DATA_NEEDED: pin 6-175] | GPIO / Peripheral / Power / GND — See datasheet section 4 for full per-pin assignments; pins include ADC inputs, SDFM channels, VDD/VSS pairs, GPIO, and peripheral functions |
Aplicaciones típicas
TMS320F28075PTPQ es adecuado para 6 aplicacións: EV Traction Inverter Control, Industrial Servo Drive & FOC Motor Control, Digital Power / PFC + LLC Converter Control, Solar / Photovoltaic String Inverter, On-Board EV Charger (OBC), Wireless Power / Industrial Battery Charger.
EV Traction Inverter Control
The TMS320F28075PTPQ's 120 MHz C28x core with FPU and TMU executes field-oriented control (FOC) loops for EV traction inverters with sub-microsecond cycle times. Its integrated SDFM channels accept isolated shunt current sensor outputs directly, eliminating external ADC stages and reducing BOM cost. The 512 KB Flash holds multi-vector algorithm models plus diagnostic firmware. According to TI C2000 reference designs, the CLA offloads per-phase current sampling and Park transforms, leaving the main core free for torque loop and modulation. This makes the F28075 well suited to 3-phase permanent-magnet motor inverters up to several hundred kW where switching frequencies push PWM into the 20-50 kHz range and ADC sampling must be tightly synchronized to PWM edges.
Recomendado
Industrial Servo Drive & FOC Motor Control
For industrial servo drives running field-oriented control on 3-phase PMSM or induction motors, the TMS320F28075PTPQ delivers the deterministic real-time performance required for high-bandwidth current loops. The 12-bit ADC synchronizes to high-resolution PWM channels for sub-microsecond sampling precision, while the TMU accelerates Park/Clarke/inverse transforms critical to vector control. The CLA executes encoder feedback processing in parallel. With 512 KB Flash the device supports multi-motor firmware libraries plus safety diagnostics per IEC 61800. According to TI's MotorControl SDK documentation, this device targets servo drives, CNC spindle motors, and robotic actuators where torque ripple minimization and high dynamic stiffness are required.
Recomendado
Digital Power / PFC + LLC Converter Control
The TMS320F28075PTPQ is widely used in AC/DC and DC/DC digital power stages, including totem-pole PFC and LLC resonant converters for telecom, server, and industrial power supplies. The high-resolution PWM (150 ps resolution) provides fine duty-cycle control critical to achieving tight regulation loops above 100 kHz switching frequency. The FPU executes digital compensator math, while the TMU accelerates math needed for efficiency optimization. The 512 KB Flash holds multi-mode firmware and adaptive loop tuning parameters. According to TI's Digital Power SDK reference designs, this device is commonly selected for 1-10 kW power converters where efficiency targets exceed 96% and where dynamic load response must be below 1 ms.
Recomendado
Solar / Photovoltaic String Inverter
The TMS320F28075PTPQ supports photovoltaic string inverter control, executing MPPT algorithms, grid synchronization (PLL), and active anti-islanding protection in a single device. Its SDFM channels read isolated DC and AC sensor signals; the FPU accelerates MPPT and inverter control math. With 512 KB Flash it holds grid-code firmware variants for multiple geographies plus logging firmware. According to TI's renewable-energy reference designs, the F28075 is well suited to 5-50 kW residential and commercial string inverters where UL 1741, IEEE 1547, and VDE-AR-N 4105 grid codes must be satisfied, and where functional-safety documentation accelerates certification.
Recomendado
On-Board EV Charger (OBC)
For Level 2 onboard EV chargers in the 3.3-22 kW range, the TMS320F28075PTPQ provides the multi-loop control performance needed for PFC + LLC + isolation stages. The 120 MHz core executes PFC average-current-mode control and LLC variable-frequency control in parallel via the CLA. The 12-bit ADC samples voltage and current synchronously with PWM edges for tight regulation. AEC-Q100 qualification plus functional safety documentation supports ISO 26262-oriented designs. According to TI's onboard charger reference designs, the F28075 is commonly paired with isolated gate drivers and CAN FD transceivers for BMS communication, with XAIPART companion parts SN74LVC04APWR (logic) and TCAN1044DRQ1 (CAN transceiver) frequently selected alongside it.
Recomendado
Wireless Power / Industrial Battery Charger
The TMS320F28075PTPQ controls wireless power transfer systems and industrial battery chargers where dynamic coil tuning, foreign-object detection (FOD), and multi-stage charge profiles require real-time DSP performance. The FPU accelerates resonant tank math; the SDFM reads isolated current for FOD algorithms. According to TI's Wireless Power SDK, this device is suited to Qi-compliant and proprietary inductive charging stations from 50 W to several kW. The 176-HLQFP package supports ample GPIO for coil relay switching, LED status, and display interfacing, while the 512 KB Flash holds multi-protocol firmware libraries plus OEM-specific tuning parameters.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TMS320F28075PTPQ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TMS320F28075PTPQR | TMS320F28075PTPS | TMS320F28076PTPQ | TMS320F28375S | SAK-TC234LP-32F200N |
|---|---|---|---|---|---|---|
| Package | 176-HLQFP (PTP) 24x24 mm | 176-HLQFP (PTP) 24x24 mm - same | 176-HLQFP (PTP) 24x24 mm - same | 176-HLQFP (PTP) 24x24 mm - same | 176-HLQFP (PTP) 24x24 mm - same | LQFP-176 - same pin count, footprint-compatible |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Infineon |
| Core | C28x 32-bit, 120 MHz | C28x 32-bit, 120 MHz | C28x 32-bit, 120 MHz | C28x 32-bit, 120 MHz | C28x dual-core, 200 MHz | TriCore TC1.6, 133 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB + extras | 1024 KB | 2048 KB |
| FPU | Yes (single-precision) | Yes | Yes | Yes | Yes (dual-core) | Yes |
| CLA Coprocessor | Yes | Yes | Yes | Yes | Yes (2x CLAs) | No |
| Functional Safety | FuSa-capable | FuSa-capable | FuSa-capable | FuSa-capable | FuSa-capable | ASIL-D capable |
Diferenciadores clave
- Integrated CLA + SDFM combination (frente a STM32F407 (e.g., STM32F429VGT6 from Site MPN list))
- 120 MHz C28x + FPU + TMU optimized for control loops (frente a SAK-TC234LP-32F200N (Infineon AURIX))
- AEC-Q100 + Functional Safety documentation in single device (frente a TMS320F28068PFPS (obsolete, per Octopart comparison))
Notas de diseño
Decouple every VDD/VSS pair with a 100 nF ceramic cap placed within 3 mm of each pin pair, plus a 4.7 uF bulk cap per VDD rail. The F28075's internal 1.2 V LDO is sensitive to load transients above 50 mA/us; insufficient bulk capacitance causes core voltage droop and potential reset. Per TI C2000 hardware design guide, do not share decoupling between adjacent VDD pairs.
Solder the exposed thermal pad (EP) of the 176-HLQFP to a continuous copper pour on the top layer, stitched with thermal vias to inner ground planes. The HLQFP is a wire-bond package, so thermal pad solder quality directly impacts the junction-to-ambient thermal resistance. At full 120 MHz operation with all peripherals enabled, expect 200-500 mW dissipation requiring at least 1 sq-in of 2-oz copper for safe operation up to 85C ambient.
Route all ADC analog inputs (ADCINAx/ADCINBx) with differential pairs guarded by ground traces; keep digital switching signals (PWM outputs) at least 3 trace-widths away to minimize crosstalk. Per TI's C2000 PCB design guide, use a 4-layer PCB with a dedicated ground plane for best ADC SNR; 2-layer boards typically lose 3-5 ENOB. Place the crystal/oscillator within 5 mm of the X1/X2 pins and guard with a ground ring.
Confirm the boot-mode GPIO pin pull-up/pull-down configuration matches your firmware boot source before PCB fabrication - misconfigured boot pins cause 'brick dead' parts that require JTAG recovery. Also note that the F28075 (vs F28076/F2837x) has fewer DMA channels and lacks USB; verify peripheral availability against the device-specific datasheet section 1 before committing to pinout, as the datasheet covers the entire F2807x family.
The 12-bit ADC achieves best performance when sampling synchronous to PWM edges - use the SOC (start-of-conversion) signals driven by PWM modules rather than software triggering. The SDFM channels accept isolated sigma-delta bitstreams up to 20 MHz; route these traces as matched-length differential pairs and terminate per the modulator datasheet. According to TI's C2000 reference designs, improper SDFM clock routing is the most common cause of failed shunt current sensing.
Información de cumplimiento
AEC-Q100 qualified per TI product page (Q1 suffix). RoHS and REACH compliant per DigiKey product listing. Functional Safety (FuSa) documentation available from TI.
