TPA321D - 700mW Mono Class-AB Audio Amp | TI
N.º de pieza: TPA321D ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $1.8757 | $1,88 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
TPA321D Descripción general
An audio power amplifier is an integrated circuit that increases the voltage and current capability of an analog audio signal so it can drive a loudspeaker or other finite impedance. A Class-AB amplifier provides linear operation with lower crossover distortion than a traditional Class-B design. A differential input accepts signal voltage between two input terminals, while a bridge-tied-load output uses both amplifier outputs to develop voltage across the speaker without requiring a speaker-coupling capacitor.
The TPA321 family is specified for 3.3 V and 5 V operation and supports a 2.5 V to 5.5 V supply range. At a 3.3 V supply, the manufacturer material states that the device can deliver 250 mW continuously into an 8-ohm bridge-tied load with less than 1% THD+N over the voice band. The TPA321D ordering option is supplied in the 8-pin SOIC package and supports a -40°C to +85°C operating-temperature range.
Differential input architecture can help reject common-mode noise when the source is balanced or when noise appears equally on both input conductors. The bridge-tied-load topology places the speaker between OUT+ and OUT-, so neither output pin should be grounded merely to establish a common reference. Input, supply, and output stability components must be implemented according to the manufacturer datasheet to preserve stable operation and acceptable distortion.
Typical uses include portable-device speakers, compact audio accessories, personal-audio products, and other low-voltage mono sound systems. The design is appropriate when a small internal speaker must be driven directly and board area is limited. At higher power or with a longer speaker connection, cable losses and load tolerance should be checked before release.
Decoupling capacitors should be placed close to the supply pins, and input components should be arranged to minimize the audio trace area. Thermal performance depends on supply voltage, output power, speaker impedance, PCB copper, and ambient temperature. This page combines verified product information with purchasing guidance and design context.
This data page distinguishes TPA321D from the broader TPA321 family, summarizes the electrically relevant evidence, and organizes sourcing and replacement questions. Values not explicitly supplied by the retrieved manufacturer or distributor data remain marked for verification rather than inferred.
Alternativas directas para TPA321D — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TPA321D (mismo factor de forma y huella) — difiere en Package, Product Type, Operating Temperature, Output Configuration, Protection Features.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
TPA321DR
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →TPA321DG4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TPA321DRG4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TPA301D
✅ Sustitución directa✓ En stock
$0.35 / unidad
Ver hoja de datos →TPA321D Valores máximos y características eléctricas
| Product Type | Mono Class-AB audio power amplifier |
| Rated Output Power | 700 mW |
| Power at 3.3 V into 8 Ohms | 250 mW continuous at less than 1% THD+N |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Specified Supply Operation | 3.3 V and 5 V |
| Configuración de salida | Bridge-tied load (BTL) |
| Input Architecture | Differential analog input |
| Channel Count | 1 channel |
| Amplifier Class | Class AB |
| Encapsulado | 8-pin SOIC |
| Tipo de montaje | Surface mount |
| Rango de temperatura de funcionamiento | -40°C to +85°C |
| Output Distortion | Less than 1% THD+N at 250 mW into 8 Ohms at 3.3 V |
Guía de configuración de pines de TPA321D 8-pin soic
Configuración de pines para TPA321D (encapsulado 8-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para TPA321D.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TPA321D es adecuado para 6 aplicacións: Portable-Device Speaker, 5 V Audio Accessory, Personal-Audio Product, Industrial Audible Alarm, Embedded Control-Board Annunciator, Low-Voltage Audio Test Fixture.
Portable-Device Speaker
The TPA321D suits a compact mono speaker stage powered from a 3.3 V system because the verified manufacturer material specifies 250 mW continuous output into an 8-ohm BTL load at less than 1% THD+N. Place the device beside the speaker connector, connect the loudspeaker between OUT+ and OUT-, and place supply bypass capacitors close to the IC. Differential input wiring helps reject common-mode noise when the source supports it. This design is most appropriate for small internal speakers where low supply voltage, limited board area, and direct BTL drive are priorities. Confirm thermal rise and cable loss because the stated output point does not guarantee unrestricted power into every impedance.
Recomendado
5 V Audio Accessory
The TPA321D is appropriate for a 5 V mono audio accessory because the manufacturer specifies 3.3 V and 5 V operation and identifies the amplifier as a 700 mW-class device. Its Class-AB BTL topology drives the load differentially, reducing the need for a traditional output coupling capacitor while keeping the signal path compact. Place local decoupling between the supply pins and ground, route OUT+ and OUT- as a short differential pair to the speaker, and verify the chosen speaker impedance. Compared with a higher-efficiency switching amplifier, the linear Class-AB architecture is straightforward but can dissipate more heat; the PCB copper area and enclosure ventilation therefore remain important at sustained high output.
Recomendado
Personal-Audio Product
The TPA321D can serve as the final mono amplification stage in a personal-audio product with an internal speaker and analog source. Differential inputs support balanced source connections or common-mode rejection, while the 2.5 V to 5.5 V supply range accommodates low-voltage portable rails. Use short ground returns, place input filtering close to the amplifier, and terminate the unused input exactly as directed by the manufacturer datasheet. The verified 250 mW result into 8 ohms at 3.3 V provides a concrete sizing point below the device's broader 700 mW class description. For voice prompts, music, or alert sounds, evaluate the actual load impedance and frequency response rather than relying only on headline power.
Recomendado
Industrial Audible Alarm
The TPA321D can amplify a low-level alarm or annunciator signal in a compact industrial control product operating from a 3.3 V or 5 V rail. Its BTL output drives a small speaker without connecting either output to ground, and the specified 250 mW continuous capability into 8 ohms at 3.3 V is suitable for moderate audible levels. Place the amplifier close to the speaker connector to limit EMI and cable loss, while keeping analog input routing away from switching nodes and power inductors. Validate alert intelligibility, distortion, startup behavior, and enclosure acoustics in the final system. If battery life dominates and the speaker is rarely active, a standby control or more efficient class-D solution may be preferable.
Recomendado
Embedded Control-Board Annunciator
The TPA321D is a practical choice for a low-voltage embedded controller that must drive an onboard piezo speaker or small dynamic annunciator. The verified 3.3 V operating point delivers 250 mW continuously into an 8-ohm BTL load below 1% THD+N, giving designers a repeatable baseline for acoustic testing. Differential inputs can receive a buffered waveform from a DAC or digital-to-analog conversion stage, and the SOIC-8 package supports conventional surface-mount assembly. Confirm that the actual speaker presents a safe load across frequency and temperature. Keep the speaker return isolated from sensitive analog grounds where practical, and use the manufacturer's input and bypass recommendations to prevent oscillation or unintended noise injection into adjacent control circuitry.
Recomendado
Low-Voltage Audio Test Fixture
The TPA321D can serve as the speaker driver in a compact audio test fixture built around a low-voltage USB or embedded supply. Its defined 3.3 V and 5 V operation permits repeatable characterization without a high-voltage amplifier supply, while the BTL topology requires the fixture speaker to float between OUT+ and OUT-. Provide local supply bypassing, use short speaker leads, and expose separate input and ground test points for debugging. The verified 250 mW continuous point into 8 ohms at 3.3 V is useful for defining a safe starting test level. Before applying continuous audio, verify the load, output waveform, temperature rise, and distortion so a fixture experiment does not overdrive the amplifier or the connected speaker.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TPA321D — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TPA321DR | TPA321DG4 | TPA321DRG4 | TPA301D |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Diferenciadores clave
- Verified low-voltage mono audio specification (frente a TPA301D)
- Differential-input BTL architecture (frente a TPA301D)
- Same-family ordering flexibility (frente a TPA301D)
Notas de diseño
Place the manufacturer-required bypass capacitors directly beside the supply and ground pins, keeping their loops short. Route differential inputs away from switching nodes, inductors, and speaker-return paths. The verified BTL architecture requires the speaker between OUT+ and OUT-; grounding either output can short the bridge and damage the device.
Keep OUT+ and OUT- traces short, closely coupled, and away from sensitive microphone or sensor inputs. Use a compact ground reference beneath the amplifier where supported by the manufacturer layout guidance. Because the target supports 3.3 V and 5 V operation, verify the actual supply range, output impedance, and distortion rather than extrapolating from the 250 mW test point.
Do not treat a same-package listing as proof of drop-in compatibility. TPA301D appears in a comparison result as SOIC-8, but the supplied evidence does not establish pin mapping, BTL behavior, or electrical limits. For any substitution, compare pin functions, supply voltage, output topology, load range, shutdown behavior, and stability requirements against the manufacturer datasheets.
Información de cumplimiento
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for TPA321D.