TS321ID - Single 30 V 800 kHz Op Amp | Texas Instruments
N.º de pieza: TS321ID ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
TS321ID Descripción general
An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The TS321 belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. Its basic amplifier functions include voltage amplification, buffering, filtering, summing, and feedback-based control, provided the external feedback network and operating limits are respected.
The verified product information identifies a single amplifier circuit, a 30 V maximum operating framework, 800 kHz bandwidth, general-purpose classification, and an 8-pin SOIC package. The bipolar architecture and low-power positioning suit cost-sensitive designs, while the SOIC footprint supports conventional surface-mount assembly. Exact offset, bias-current, noise, slew-rate, common-mode, and output-swing values require confirmation in the manufacturer datasheet before final circuit sign-off.
TS321ID is useful as a general-purpose amplifier in low- and moderate-bandwidth analog paths. Its verified 800 kHz bandwidth makes it relevant to signal conditioning where the required closed-loop bandwidth is well below that level. The single-amplifier configuration can simplify designs that need one amplifier rather than a dual package, particularly in sensor interfaces, control loops, audio preamplification, and industrial measurement circuits.
The principal design consideration is preserving signal headroom and stability. An 8-pin SOIC package requires adequate PCB spacing, controlled grounding, and decoupling close to the power pins. Feedback resistors, compensation components, and input or output loading determine the actual usable bandwidth and must be evaluated against the application. Because verified operating details beyond the supplied values are incomplete, engineers should consult the TS321 manufacturer datasheet before choosing component values.
This page combines verified manufacturer and distributor information, structured technical context, sourcing guidance, and engineering notes. It also clearly identifies unavailable electrical parameters rather than presenting guessed values, helping engineers move from part selection to a validated TS321ID design with fewer sourcing and specification ambiguities.
Alternativas directas para TS321ID — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TS321ID (mismo factor de forma y huella) — difiere en Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
TLV9301IDBVR
✅ Sustitución directa✓ En stock
$0.21 / unidad
Ver hoja de datos →TS321ID Valores máximos y características eléctricas
| Product Type | Single bipolar operational amplifier |
| Amplifier Circuit Count | 1 circuit |
| Maximum Operating Voltage | 30 V |
| Gain-Bandwidth Product | 800 kHz |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C |
| Encapsulado | SOIC-8 (D) |
| Recuento de pines | 8 pins |
| Tipo de montaje | Surface mount |
| Amplifier Classification | Standard general-purpose amplifier |
| Architecture | Bipolar |
| Product Positioning | Low-power, cost-sensitive |
Guía de configuración de pines de TS321ID soic-8 (d)
Configuración de pines para TS321ID (encapsulado soic-8 (d)). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para TS321ID.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TS321ID es adecuado para 6 aplicacións: General-Purpose Analog Signal Conditioning, Industrial Instrumentation, Sensor Interface Conditioning, Audio Preamplification, Control and Feedback Loops, Low-Frequency Active Filters.
General-Purpose Analog Signal Conditioning
The TS321ID is a single bipolar operational amplifier with a verified 800 kHz gain-bandwidth product, making it suitable for moderate-bandwidth conditioning stages. It can provide buffering, gain, summing, or basic active filtering when the closed-loop bandwidth remains comfortably below the verified value. The 8-pin SOIC package also supports compact surface-mount layouts. Verify offset, bias current, noise, input range, output swing, and stability in the datasheet before selecting resistor and capacitor values.
Recomendado
Industrial Instrumentation
The TS321ID's verified 30 V operating framework and -40 °C to +125 °C temperature range make it a candidate for industrial instrumentation where signal conditioning is required. It can amplify or buffer low-frequency sensor signals in measurement chains, provided the source impedance, common-mode voltage, and output loading remain inside the manufacturer limits. The single-amplifier format simplifies one-channel signal paths, while the SOIC-8 package keeps the footprint compact.
Recomendado
Sensor Interface Conditioning
The TS321ID can be used in a sensor interface as a voltage amplifier or buffer when the required signal bandwidth is below its verified 800 kHz gain-bandwidth product. A feedback network sets the closed-loop gain, while local supply decoupling and careful grounding reduce noise pickup. Because the supplied data does not provide input bias current, offset voltage, common-mode range, or output swing, verify those parameters against the sensor output and supply rails before finalizing the stage.
Recomendado
Audio Preamplification
The TS321ID's 800 kHz verified bandwidth is suitable for audio preamplifier and low-frequency audio buffer applications when the circuit does not require high-frequency slew performance beyond the available specification. The bipolar amplifier can support gain and impedance buffering stages, but distortion, noise, offset, and output-drive requirements must be checked in the full datasheet. Place the feedback network close to the amplifier pins and maintain a low-impedance return path.
Recomendado
Control and Feedback Loops
The single TS321ID channel can serve as an error amplifier or feedback element in low- and moderate-bandwidth control loops. Its verified 800 kHz gain-bandwidth product provides a defined starting point for loop-bandwidth planning, but stability depends on the feedback topology, compensation, load, and plant. Confirm the device's slew rate, output current, output swing, and common-mode limits in the datasheet before using it in a new compensation network.
Recomendado
Low-Frequency Active Filters
The TS321ID can be used in active-filter stages operating below its verified 800 kHz gain-bandwidth limit. A single amplifier may implement first-order sections or participate in a multi-stage filter, with passive components defining the nominal response. Validate the component values against the actual closed-loop noise gain and verify input/output headroom, load capacitance, and stability. The 8-pin SOIC package is practical for compact analog boards requiring one amplifier per section.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TS321ID — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TLV9301ID |
|---|---|---|
| Package | SOIC-8 (D), 8 pins | SOIC-8 (D), same package family; exact pin compatibility requires datasheet verification |
| Brand | Texas Instruments | Texas Instruments |
| Amplifier Circuit Count | 1 circuit | Single amplifier |
| Operating Voltage | 30 V | 40 V |
| Gain-Bandwidth Product | 800 kHz | 1 MHz |
| Application Class | Standard general-purpose amplifier | Low-power operational amplifier |
Diferenciadores clave
- Verified 800 kHz gain-bandwidth product for moderate-bandwidth analog signal conditioning (frente a TLV9301ID)
- 30 V operating framework (frente a TLV9301ID)
- Single amplifier in an 8-pin SOIC package (frente a TLV9301ID)
Notas de diseño
Place the TS321ID close to the signal source, feedback network, and load to minimize parasitic capacitance and feedback-loop delay. Keep the SOIC-8 footprint free of unintended copper or solder bridges around adjacent pins, route high-impedance input traces away from switching nodes, and provide a continuous ground reference. The supplied data does not include a pin-level layout drawing, so confirm every connection against the official TS321 datasheet.
Use the TS321ID only within the manufacturer-specified supply and input/output limits. The verified product information identifies a 30 V operating framework but does not provide the minimum supply, common-mode range, or output swing. Before biasing the circuit, check those values in the datasheet and ensure input and output stages do not approach the rails. Decouple the supply pins locally with the recommended capacitor network from the datasheet.
Do not treat the 800 kHz gain-bandwidth product as a guaranteed operating frequency for every gain, load, or output amplitude. Closed-loop bandwidth depends on noise gain, feedback impedance, capacitive loading, and stability. Check the datasheet test conditions and simulate the complete analog path, especially when driving long cables, ADC inputs, motor-control signals, or other high-capacitance loads.
Información de cumplimiento
The supplied verified snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred.
