Microchip Technology

VSC8504XKS-04 Quad-Port Gigabit Ethernet PHY | Microchip

N.º de pieza: VSC8504XKS-04 ✓ Activo
3.3 V Vdss 256-pin PBGA, 17 x 17 mm Package 10 Mb/s, 100 Mb/s, and 1000 Mb/s Speed
MOQ: 1 |

VSC8504XKS-04 Descripción general

The Microchip Technology VSC8504XKS-04 is a four-port Gigabit Ethernet physical layer transceiver with support for 10/100/1000 Mb/s copper and fiber links, supplied in a 256-pin PBGA package measuring 17 x 17 mm. It provides (Q)SGMII connectivity and integrates Microchip EcoEthernet and IEEE 802.3az Energy Efficient Ethernet capabilities for power-conscious network equipment. The device operates from a 3.3 V supply in the identified configuration.

A Gigabit Ethernet PHY is the physical-layer component that converts digital data into signals suitable for transmission over copper or optical media, while recovering incoming signals and supporting link negotiation. Within the network hierarchy, the PHY sits between a MAC or switching fabric and a network medium. The VSC8504 consolidates four Gigabit Ethernet channels into one device, reducing component count in multiport switches, routers, access equipment, and industrial Ethernet systems.

Key features include four Gigabit Ethernet ports, copper and fiber support, and (Q)SGMII interfaces for connecting the PHY to a host or switching ASIC. IEEE 802.3az Energy Efficient Ethernet allows the system to reduce power consumption when link traffic is light, while EcoEthernet provides additional network power-management features. These functions are particularly valuable in enterprise networking and data-center equipment where many continuously connected ports can create a substantial aggregate power load.

The -04 ordering suffix identifies the specific configuration of the VSC8504 family, while XKS denotes its 256-pin PBGA implementation. A 256-ball grid supports the substantial number of high-speed I/O and power connections required by four independent Gigabit channels. The package is designed for surface-mount assembly and, according to the product listing information, is supplied in a tray. Its 17 x 17 mm footprint demands careful BGA layout, thermal via, power-plane, and high-speed signal-routing practices.

Typical uses include enterprise access switches, data-center aggregation equipment, consumer networking products, industrial Ethernet gateways, and copper-to-fiber network interfaces. Because the device can address both copper and fiber links, it can support equipment requiring flexible media handling while centralizing four physical channels around a common (Q)SGMII-based architecture. Exact fiber, copper, clocking, and transceiver requirements should be confirmed against the manufacturer data sheet for the exact ordering code.

A critical design consideration is the separation of analog and digital power delivery. The VSC8504 Hardware Design Checklist recommends low-resistance local supply paths, correctly positioned decoupling, and ferrite beads ahead of series inductors where filtering is needed. Controlled impedance routing, short high-speed connections, uninterrupted reference planes, and careful BGA escape routing are equally important for reliable (Q)SGMII and Ethernet performance.

This product record combines the manufacturer’s device positioning with exact package, interface, speed, compliance, and sourcing details, then adds implementation guidance, replacement analysis, and application-oriented design considerations. It is intended to help engineers qualify the PHY for a multiport Ethernet design before committing to a complex 256-pin BGA layout.

Alternativas directas para VSC8504XKS-04 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

VSC8504XKS-05

✅ Sustitución directa
📦 256-pin PBGA (17 x 17 mm)
Same VSC8504 family and 256-pin PBGA format; the ordering-code-specific difference is not quantified in the available documentation.

📋 Alternativa de referencia (no en el catálogo)

VSC8504XKS-04 Especificaciones

Port Count 4 ports
Ethernet Speed Support 10 Mb/s, 100 Mb/s, and 1000 Mb/s
Network Standard Gigabit Ethernet
Media Support Copper and fiber
Host Interface (Q)SGMII
Power Management EcoEthernet
Energy Efficient Ethernet IEEE 802.3az
Tensión de alimentación 3.3 V
Encapsulado 256-pin PBGA, 17 x 17 mm
Tipo de montaje Surface-mount
Packaging Tray
Number of Circuits 1 circuit
Ethernet Family Ethernet
Component Category Telecom IC
Estado RoHS Compliant

Guía de configuración de pines de VSC8504XKS-04 256-pin pbga, 17 x 17 mm

Configuración de pines para VSC8504XKS-04 (encapsulado 256-pin pbga, 17 x 17 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 256-pin pbga, 17 x 17 mm para VSC8504XKS-04

No hay datos detallados de patillaje disponibles para VSC8504XKS-04.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

VSC8504XKS-04 es adecuado para 6 aplicacións: Enterprise Access Switching, Data-Center Network Aggregation, Industrial Ethernet Gateway, Copper-to-Fiber Network Interface, Consumer Network Equipment, Network Monitoring and Test Equipment.

🌐

Enterprise Access Switching

The VSC8504XKS-04 fits access-switch designs that require four Gigabit Ethernet copper ports backed by a high-speed switching or host ASIC. Its (Q)SGMII interface provides a common high-speed path for the four physical channels, while the 256-pin PBGA supports the required power, clock, control, and media connections. IEEE 802.3az Energy Efficient Ethernet is especially valuable in access equipment installed with many ports that spend substantial time at low utilization. A practical design must still provide local decoupling, controlled-impedance routing, and a media implementation appropriate to each copper or fiber port.

🖥️

Data-Center Network Aggregation

The VSC8504XKS-04 is suitable for data-center aggregation equipment that needs four high-speed physical channels without deploying four separate PHY packages. Its 10/100/1000 Mb/s support covers the copper Ethernet rates required across server-facing access, storage, and management networks, while (Q)SGMII supplies a high-speed integration path to a switching fabric. EcoEthernet and IEEE 802.3az EEE support can reduce energy use during low-activity periods across many deployed ports. High-density equipment designers should emphasize thermal-via placement, supply-plane integrity, and controlled impedance around the 256-pin PBGA.

🏭

Industrial Ethernet Gateway

The VSC8504XKS-04 can support industrial gateways requiring four Gigabit Ethernet interfaces for machine networks, factory equipment, and plant-level aggregation. Consolidating the channels in one quad-port PHY simplifies the relationship to a host controller and reduces board area compared with four independent multiport PHYs. Its Energy Efficient Ethernet capabilities are useful where links are continuously present but traffic is intermittent. Before deployment, confirm the exact temperature grade, isolation requirements, media support, and electromagnetic requirements against the manufacturer data sheet for the -04 configuration.

🔧

Copper-to-Fiber Network Interface

The VSC8504XKS-04 is applicable to dual-media network equipment because the family is identified as a four-port copper/fiber Gigabit Ethernet PHY with (Q)SGMII connectivity. It can consolidate multiple copper links and fiber-facing channels in equipment that bridges access, industrial, or enterprise networks. The (Q)SGMII interface allows a compatible switching or host ASIC to manage the four channels. Final implementation must confirm the supported media modes, required external drivers or magnetics, loss-of-signal behavior, and channel-specific enable or reset requirements in the manufacturer documentation.

🧩

Consumer Network Equipment

The VSC8504XKS-04 can serve as the four-port physical layer in consumer routers, gateways, and smart network appliances. It supports the common 10/100/1000 Mb/s rates and provides EcoEthernet and IEEE 802.3az EEE functions that are valuable in consumer products expected to remain connected continuously. A four-port PHY reduces the number of high-speed media devices required by the switching ASIC. Consumer-product designers should balance board area against the demands of a 256-pin BGA and verify the precise media and clocking configuration before schematic freeze.

🔧

Network Monitoring and Test Equipment

The VSC8504XKS-04 fits multiport network monitoring appliances that must provide four Gigabit Ethernet test or service interfaces. Integrating the four PHYs behind a common (Q)SGMII architecture can simplify synchronization with a host processor or switching fabric while retaining support for copper and fiber media. Instrument-grade designs require careful isolation between channels, consistent reference clocks, controlled-impedance routing, and low-noise power distribution. The device is particularly suitable where per-port link statistics and Energy Efficient Ethernet support are needed across several monitored network links.

What is the VSC8504XKS-04?
The VSC8504XKS-04 is a Microchip Technology quad-port Gigabit Ethernet PHY supporting 10/100/1000 Mb/s operation over copper or fiber links. According to the Microchip VSC8504 product page, it uses EcoEthernet and IEEE 802.3az Energy Efficient Ethernet to optimize power in enterprise networks, data centers, and consumer electronics. The device is packaged in a 256-pin, 17 x 17 mm PBGA and exposes (Q)SGMII connectivity.
How many Gigabit Ethernet ports does the VSC8504XKS-04 support?
The VSC8504XKS-04 supports four Gigabit Ethernet ports in one package. Each channel can operate at 10 Mb/s, 100 Mb/s, or 1000 Mb/s, according to the Microchip VSC8504 product page and the distributor product description. Its quad-port architecture is intended to reduce component count in switches, routers, gateways, and other equipment requiring several high-speed physical-layer channels.
What package is used by the VSC8504XKS-04?
The VSC8504XKS-04 uses a 256-pin PBGA measuring 17 x 17 mm and is supplied in a tray for surface-mount assembly. The package size and ball count are confirmed by the product listing data, while the 256-ball format is also identified as BGA-256 in assembly information. The package outline, ball map, exposed thermal provisions, and land pattern must be taken from the manufacturer package drawing before PCB release.
Does the VSC8504XKS-04 support copper and fiber Ethernet?
Yes, the VSC8504XKS-04 is identified as a four-port Gigabit Ethernet PHY for copper or fiber media. Its device description specifically identifies copper/fiber PHY functionality and (Q)SGMII interfaces. The media implementation and required external magnetics, optical devices, or line drivers must be confirmed against the manufacturer data sheet because the media-mode details are not published on the product page.
What is the difference between VSC8504XKS-04 and VSC8504XKS-05?
Both VSC8504XKS-04 and VSC8504XKS-05 are identified as Microchip four-port Gigabit Ethernet PHYs in the same 256-pin PBGA package family. The available comparison information identifies VSC8504XKS-05 as an alternative to VSC8504XKS-04, but it does not quantify the functional difference between the -04 and -05 ordering options. Confirm revision, lead-time, temperature, and configuration requirements with Microchip before using one as a drop-in substitute.
What is the best drop-in replacement for VSC8504XKS-04?
VSC8504XKS-05 is the closest documented same-family replacement because it is listed as a VSC8504 alternative and uses the same 256-pin PBGA format. Its exact configuration and ordering-code differences must still be checked against the manufacturer’s cross-reference data. No cross-brand equivalent can be designated as a guaranteed drop-in replacement without matching the ball assignments, supply rails, clocking, reset, and (Q)SGMII behavior of the complete device.
Can VSC8514XMK-14 replace the VSC8504XKS-04?
No direct drop-in substitution should be assumed. VSC8514XMK-14 is a Microchip Ethernet transceiver associated with a different package family, while the VSC8504XKS-04 occupies a 256-pin PBGA footprint. A functional replacement requires matching PHY channels, media support, host interface, power architecture, management features, and electrical timing. Use the manufacturer cross-reference search to determine whether a specific board revision is supported.
When should I choose the VSC8504XKS-04 over a single-port Ethernet PHY?
Choose the VSC8504XKS-04 when the design requires four Gigabit Ethernet physical channels on one board and can support a 256-ball PBGA layout. Its (Q)SGMII interface can connect the four PHYs to a suitable host or switching ASIC, reducing the number of separate PHY packages. A single-port PHY may be preferable for simpler terminals, but it requires additional devices and routing when four or more copper links are needed.
Is the VSC8504XKS-04 suitable for industrial Ethernet equipment?
The VSC8504XKS-04 is suitable in principle for multiport Ethernet equipment when its operating-temperature grade, electrical limits, media implementation, and lifecycle status satisfy the system requirements. Its four channels, copper/fiber capability, and Energy Efficient Ethernet support fit access switches, gateways, and industrial controllers. The manufacturer’s data sheet must confirm the temperature grade and regulatory requirements before qualification.
Where can I download the VSC8504XKS-04 datasheet PDF?
The manufacturer product page for the VSC8504 is available at https://www.microchip.com/en-us/product/VSC8504, and a product brief PDF is hosted at https://www.mouser.com/datasheet/2/268/Microsemi_VSC8504_Product_Brief_02793_V10-1501275.pdf. Use the manufacturer documentation for final electrical limits, pin descriptions, register defaults, timing, media support, and the exact -04 ordering configuration. The product brief may not contain every implementation detail required for a finished design.
Where can I find the VSC8504XKS-04 pinout and BGA land pattern?
The pin assignment and land pattern must be obtained from the VSC8504 manufacturer package documentation because the product is supplied in a 256-pin PBGA. Use the pin-description table, package drawing, and recommended PCB land pattern together; the exposed thermal or supply balls may have electrical requirements that must not be treated as NC pins. A generic BGA drawing is not sufficient for a production 256-ball Ethernet PHY layout.
How should power and decoupling be arranged around the VSC8504XKS-04?
The VSC8504 Hardware Design Checklist recommends low-resistance supply paths, correctly positioned local decoupling, and ferrite beads ahead of series inductors where filtering is appropriate. Each supply domain should have its own planned return path, with bypass capacitance placed close to the relevant BGA balls. The checklist specifically notes that bulk decoupling and local decoupling have different roles, so the final capacitor network should follow the manufacturer reference layout.
What PCB practices are important for a 256-pin PBGA Ethernet PHY?
Use controlled-impedance routing, uninterrupted reference planes, short high-speed escape paths, and symmetric power and ground distribution around the 256-pin PBGA. (Q)SGMII traces should be routed with the impedance and length constraints specified by the manufacturer, while copper and fiber-related analog paths require isolation from digital switching noise. Via-in-pad, solder-mask, and thermal-via choices should follow the package drawing and assembly process capability.
Where can I buy the VSC8504XKS-04 and check its current lead time?
Use the Request a Quote form on this page to request the current availability, lead time, and order details for the VSC8504XKS-04. The exact manufacturer part number includes the -04 configuration and 256-pin PBGA package, which should be stated on the request. Current supply status should be confirmed when the quotation is issued because lifecycle and lead-time information can change.
What are the key specifications of VSC8504XKS-04 that engineers should know?
The key VSC8504XKS-04 specifications are four Gigabit Ethernet ports, 10/100/1000 Mb/s operation, copper and fiber support, (Q)SGMII host connectivity, EcoEthernet, IEEE 802.3az Energy Efficient Ethernet, a 3.3 V supply, and a 256-pin PBGA package measuring 17 x 17 mm. The manufacturer describes the device for enterprise networks, data centers, and consumer electronics. These features make it most relevant to multiport switches, aggregation equipment, and gateways requiring four physical channels.
What can replace the VSC8504XKS-04 in an existing design?
VSC8504XKS-05 is the leading same-family candidate because the cross-reference information associates it with the VSC8504XKS-04 and lists the same 256-pin PBGA package format. Because the exact -04 and -05 configuration delta is not quantified publicly, engineers should verify pin, clock, register, media, and ordering-code compatibility before substitution. A functional equivalent from another supplier should not be treated as a drop-in part without a full electrical and mechanical review.

Datos de referencia de ingeniería para VSC8504XKS-04 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the VSC8504XKS-04 when a design requires four integrated Gigabit Ethernet physical channels, copper and fiber media support, and a (Q)SGMII connection to a host ASIC or switching fabric. It is particularly attractive in access switches, enterprise aggregation equipment, industrial gateways, and consumer networking products where Energy Efficient Ethernet can reduce idle-link power. VSC8504XKS-05 is the closest documented same-family alternative because it uses the same 256-pin PBGA format, but its exact ordering-code configuration must be compared before substitution. Do not treat VSC8514XMK-14 or another family as a drop-in part merely because it provides Gigabit Ethernet; its package and pin arrangement are different. No cross-brand part should be approved as a drop-in replacement without a complete comparison of the ball map, electrical rails, clocking, reset, management registers, host interface, media implementation, and lifecycle status.

Comparación con alternativas

Parámetro Este producto VSC8504XKS-05
Package 256-pin PBGA (17 x 17 mm) 256-pin PBGA (17 x 17 mm)
Brand Microchip Technology Microchip Technology
Port Count 4 ports 4 ports
Ethernet Speed Support 10/100/1000 Mb/s 10/100/1000 Mb/s
Media Support Copper and fiber Copper and fiber
Host Interface (Q)SGMII (Q)SGMII
Energy Efficient Ethernet IEEE 802.3az IEEE 802.3az
Supply Voltage 3.3 V 3.3 V
Mounting Type Surface-mount Surface-mount

Diferenciadores clave

  • Four Gigabit channels in a single PHY package (frente a VSC8504XKS-05)
  • Combined copper and fiber media capability (frente a VSC8504XKS-05)
  • Power management for continuously connected networks (frente a VSC8504XKS-05)

Notas de diseño

Apply the VSC8504 Hardware Design Checklist when planning the supply network. Give each power domain a low-resistance path, place local decoupling at the corresponding BGA balls, and use bulk capacitance where the device requires energy during transients. When a ferrite bead and series inductor are used, follow the checklist preference for a ferrite bead where suitable. Validate DC voltage tolerance and transient response at the PHY pins because an acceptable average supply does not guarantee adequate margin during Ethernet switching activity.

Route (Q)SGMII and other high-speed interfaces as controlled-impedance lines with continuous reference planes and the minimum practical discontinuity count. Keep the BGA escape region symmetric and avoid splitting power or ground planes beneath the device. Use the manufacturer’s recommended land pattern, thermal-via arrangement, and assembly allowances rather than relying on a generic 256-ball library footprint. Verify differential and single-ended impedance against the actual PCB stack-up and fabrication process.

Separate Ethernet media and clock-related circuitry from digital host-interface routing wherever the reference design allows it. Pay particular attention to return paths under high-speed lines, via stubs, and the transition between package escape traces and PCB layers. The (Q)SGMII interface must meet its specified timing and impedance requirements, while copper or fiber media circuits must follow the media-specific reference layout. Signal-integrity simulation should use actual layer thickness, dielectric properties, and component models.

Do not treat all VSC8504 ordering codes as automatically interchangeable. The -04 and -05 parts share the documented 256-pin PBGA format, but the exact configuration delta is not quantified in the available public comparison. Before replacing a fitted device, compare revision, clocking, reset, management, media, temperature, and ordering-code requirements in the manufacturer cross-reference system. Also confirm the complete 256-ball pin map rather than assigning unused positions from a generic BGA convention.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS compliance is identified in the assembly listing. Reach, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available product information. AEC-Q100 is not applicable to this networking interface device.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

VSC8504XKS-04 datasheet VSC8504XKS-04 pinout VSC8504XKS-04 datasheet pdf VSC8504XKS-04 equivalent VSC8504XKS-04 replacement VSC8504XKS-04 cross reference VSC8504XKS-04 vs VSC8504XKS-05 VSC8504XKS-04 footprint VSC8504XKS-04 price VSC8504XKS-04 stock Microchip VSC8504XKS-04 VSC8504XKS-04 application circuit VSC8504 quad port Gigabit PHY VSC8504XKS-04 256 PBGA

Componentes & términos relacionados

Microchip Technology VSC8504XKS-04 VSC8504 VSC8504XKS-05 VSC8514XMK-14 Gigabit Ethernet PHY Ethernet physical layer quad-port Ethernet 10/100/1000 Mb/s copper Ethernet fiber Ethernet (Q)SGMII EcoEthernet IEEE 802.3az Energy Efficient Ethernet 256-pin PBGA BGA-256 17 x 17 mm package surface-mount technology enterprise networking data-center networking industrial Ethernet consumer networking controlled impedance local decoupling
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ