VSC8504XKS-04 Quad-Port Gigabit Ethernet PHY | Microchip
MPN: VSC8504XKS-04 ✓ Hoạt độngVSC8504XKS-04 Tóm tắt
A Gigabit Ethernet PHY is the physical-layer component that converts digital data into signals suitable for transmission over copper or optical media, while recovering incoming signals and supporting link negotiation. Within the network hierarchy, the PHY sits between a MAC or switching fabric and a network medium. The VSC8504 consolidates four Gigabit Ethernet channels into one device, reducing component count in multiport switches, routers, access equipment, and industrial Ethernet systems.
Key features include four Gigabit Ethernet ports, copper and fiber support, and (Q)SGMII interfaces for connecting the PHY to a host or switching ASIC. IEEE 802.3az Energy Efficient Ethernet allows the system to reduce power consumption when link traffic is light, while EcoEthernet provides additional network power-management features. These functions are particularly valuable in enterprise networking and data-center equipment where many continuously connected ports can create a substantial aggregate power load.
The -04 ordering suffix identifies the specific configuration of the VSC8504 family, while XKS denotes its 256-pin PBGA implementation. A 256-ball grid supports the substantial number of high-speed I/O and power connections required by four independent Gigabit channels. The package is designed for surface-mount assembly and, according to the product listing information, is supplied in a tray. Its 17 x 17 mm footprint demands careful BGA layout, thermal via, power-plane, and high-speed signal-routing practices.
Typical uses include enterprise access switches, data-center aggregation equipment, consumer networking products, industrial Ethernet gateways, and copper-to-fiber network interfaces. Because the device can address both copper and fiber links, it can support equipment requiring flexible media handling while centralizing four physical channels around a common (Q)SGMII-based architecture. Exact fiber, copper, clocking, and transceiver requirements should be confirmed against the manufacturer data sheet for the exact ordering code.
A critical design consideration is the separation of analog and digital power delivery. The VSC8504 Hardware Design Checklist recommends low-resistance local supply paths, correctly positioned decoupling, and ferrite beads ahead of series inductors where filtering is needed. Controlled impedance routing, short high-speed connections, uninterrupted reference planes, and careful BGA escape routing are equally important for reliable (Q)SGMII and Ethernet performance.
This product record combines the manufacturer’s device positioning with exact package, interface, speed, compliance, and sourcing details, then adds implementation guidance, replacement analysis, and application-oriented design considerations. It is intended to help engineers qualify the PHY for a multiport Ethernet design before committing to a complex 256-pin BGA layout.
Bộ thay thế dễ dàng lắp đặt cho VSC8504XKS-04 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
VSC8504XKS-05
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
VSC8504XKS-04 Thông số kỹ thuật
| Port Count | 4 ports |
| Ethernet Speed Support | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Network Standard | Gigabit Ethernet |
| Media Support | Copper and fiber |
| Host Interface | (Q)SGMII |
| Power Management | EcoEthernet |
| Energy Efficient Ethernet | IEEE 802.3az |
| Điện áp cung cấp | 3.3 V |
| Hộp | 256-pin PBGA, 17 x 17 mm |
| Kiểu lắp đặt | Surface-mount |
| Packaging | Tray |
| Number of Circuits | 1 circuit |
| Ethernet Family | Ethernet |
| Component Category | Telecom IC |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân VSC8504XKS-04 256-pin pbga, 17 x 17 mm
Cấu hình chân cho VSC8504XKS-04 (256-pin pbga, 17 x 17 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho VSC8504XKS-04.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
VSC8504XKS-04 phù hợp cho 6 Áp dụngs: Enterprise Access Switching, Data-Center Network Aggregation, Industrial Ethernet Gateway, Copper-to-Fiber Network Interface, Consumer Network Equipment, Network Monitoring and Test Equipment.
Enterprise Access Switching
The VSC8504XKS-04 fits access-switch designs that require four Gigabit Ethernet copper ports backed by a high-speed switching or host ASIC. Its (Q)SGMII interface provides a common high-speed path for the four physical channels, while the 256-pin PBGA supports the required power, clock, control, and media connections. IEEE 802.3az Energy Efficient Ethernet is especially valuable in access equipment installed with many ports that spend substantial time at low utilization. A practical design must still provide local decoupling, controlled-impedance routing, and a media implementation appropriate to each copper or fiber port.
Được đề xuất
Data-Center Network Aggregation
The VSC8504XKS-04 is suitable for data-center aggregation equipment that needs four high-speed physical channels without deploying four separate PHY packages. Its 10/100/1000 Mb/s support covers the copper Ethernet rates required across server-facing access, storage, and management networks, while (Q)SGMII supplies a high-speed integration path to a switching fabric. EcoEthernet and IEEE 802.3az EEE support can reduce energy use during low-activity periods across many deployed ports. High-density equipment designers should emphasize thermal-via placement, supply-plane integrity, and controlled impedance around the 256-pin PBGA.
Được đề xuất
Industrial Ethernet Gateway
The VSC8504XKS-04 can support industrial gateways requiring four Gigabit Ethernet interfaces for machine networks, factory equipment, and plant-level aggregation. Consolidating the channels in one quad-port PHY simplifies the relationship to a host controller and reduces board area compared with four independent multiport PHYs. Its Energy Efficient Ethernet capabilities are useful where links are continuously present but traffic is intermittent. Before deployment, confirm the exact temperature grade, isolation requirements, media support, and electromagnetic requirements against the manufacturer data sheet for the -04 configuration.
Được đề xuất
Copper-to-Fiber Network Interface
The VSC8504XKS-04 is applicable to dual-media network equipment because the family is identified as a four-port copper/fiber Gigabit Ethernet PHY with (Q)SGMII connectivity. It can consolidate multiple copper links and fiber-facing channels in equipment that bridges access, industrial, or enterprise networks. The (Q)SGMII interface allows a compatible switching or host ASIC to manage the four channels. Final implementation must confirm the supported media modes, required external drivers or magnetics, loss-of-signal behavior, and channel-specific enable or reset requirements in the manufacturer documentation.
Được đề xuất
Consumer Network Equipment
The VSC8504XKS-04 can serve as the four-port physical layer in consumer routers, gateways, and smart network appliances. It supports the common 10/100/1000 Mb/s rates and provides EcoEthernet and IEEE 802.3az EEE functions that are valuable in consumer products expected to remain connected continuously. A four-port PHY reduces the number of high-speed media devices required by the switching ASIC. Consumer-product designers should balance board area against the demands of a 256-pin BGA and verify the precise media and clocking configuration before schematic freeze.
Được đề xuất
Network Monitoring and Test Equipment
The VSC8504XKS-04 fits multiport network monitoring appliances that must provide four Gigabit Ethernet test or service interfaces. Integrating the four PHYs behind a common (Q)SGMII architecture can simplify synchronization with a host processor or switching fabric while retaining support for copper and fiber media. Instrument-grade designs require careful isolation between channels, consistent reference clocks, controlled-impedance routing, and low-noise power distribution. The device is particularly suitable where per-port link statistics and Energy Efficient Ethernet support are needed across several monitored network links.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho VSC8504XKS-04 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | VSC8504XKS-05 |
|---|---|---|
| Package | 256-pin PBGA (17 x 17 mm) | 256-pin PBGA (17 x 17 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Port Count | 4 ports | 4 ports |
| Ethernet Speed Support | 10/100/1000 Mb/s | 10/100/1000 Mb/s |
| Media Support | Copper and fiber | Copper and fiber |
| Host Interface | (Q)SGMII | (Q)SGMII |
| Energy Efficient Ethernet | IEEE 802.3az | IEEE 802.3az |
| Supply Voltage | 3.3 V | 3.3 V |
| Mounting Type | Surface-mount | Surface-mount |
Bảo phân biệt quan trọng
- Four Gigabit channels in a single PHY package (vsVSC8504XKS-05)
- Combined copper and fiber media capability (vsVSC8504XKS-05)
- Power management for continuously connected networks (vsVSC8504XKS-05)
Ghi chú thiết kế
Apply the VSC8504 Hardware Design Checklist when planning the supply network. Give each power domain a low-resistance path, place local decoupling at the corresponding BGA balls, and use bulk capacitance where the device requires energy during transients. When a ferrite bead and series inductor are used, follow the checklist preference for a ferrite bead where suitable. Validate DC voltage tolerance and transient response at the PHY pins because an acceptable average supply does not guarantee adequate margin during Ethernet switching activity.
Route (Q)SGMII and other high-speed interfaces as controlled-impedance lines with continuous reference planes and the minimum practical discontinuity count. Keep the BGA escape region symmetric and avoid splitting power or ground planes beneath the device. Use the manufacturer’s recommended land pattern, thermal-via arrangement, and assembly allowances rather than relying on a generic 256-ball library footprint. Verify differential and single-ended impedance against the actual PCB stack-up and fabrication process.
Separate Ethernet media and clock-related circuitry from digital host-interface routing wherever the reference design allows it. Pay particular attention to return paths under high-speed lines, via stubs, and the transition between package escape traces and PCB layers. The (Q)SGMII interface must meet its specified timing and impedance requirements, while copper or fiber media circuits must follow the media-specific reference layout. Signal-integrity simulation should use actual layer thickness, dielectric properties, and component models.
Do not treat all VSC8504 ordering codes as automatically interchangeable. The -04 and -05 parts share the documented 256-pin PBGA format, but the exact configuration delta is not quantified in the available public comparison. Before replacing a fitted device, compare revision, clocking, reset, management, media, temperature, and ordering-code requirements in the manufacturer cross-reference system. Also confirm the complete 256-ball pin map rather than assigning unused positions from a generic BGA convention.
Thông tin tuân thủ
RoHS compliance is identified in the assembly listing. Reach, lead-free, halogen-free, and conflict-minerals declarations are not stated in the available product information. AEC-Q100 is not applicable to this networking interface device.