Microchip Technology

VSC8540XMV-03 - 1-Port Cu PHY | Microchip Technology

N.º de pieza: VSC8540XMV-03 ✓ Activo
68-pin QFN Package
MOQ: 1 |

VSC8540XMV-03 Descripción general

The Microchip Technology VSC8540XMV-03 is a single-port copper Ethernet PHY with integrated IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication. It is packaged in a 68-pin QFN measuring 8 mm by 8 mm and is designed for space-constrained 10BASE-TX and EtherCAT applications. The device supports RGMII, MII, and related serial interfaces indicated by the manufacturer product information.

A copper Ethernet PHY is a physical-layer transceiver that converts digital Ethernet data into signals suitable for transmission over twisted-pair cabling. In the network hierarchy, a PHY operates below the Ethernet MAC and above the physical cable. Its primary functions include line signaling, link negotiation, clock recovery, and recovery from impaired copper links. The VSC8540XMV-03 places these functions in a compact surface-mount package for embedded network equipment.

The VSC8540XMV-03 provides Energy Efficient Ethernet and Wake-on-LAN support, allowing compatible systems to reduce link power when appropriate and preserve network activity during low-power operating states. Synchronous Ethernet support provides a mechanism for maintaining timing relationships in synchronous network architectures. FLF2 indication supplies a fault-related status function for systems that monitor link behavior. These features make the PHY applicable to industrial Ethernet, communications equipment, and embedded EtherCAT designs.

The 8 mm by 8 mm single-row QFN package reduces PCB footprint compared with larger Ethernet transceivers. Its RGMII implementation is identified as compliant with RGMII version 2.0 timing compensation, eliminating the need for separate on-board delay lines in applicable designs. The manufacturer also highlights integrated line-side termination, which can conserve board space, lower electromagnetic interference, and improve system performance when the termination arrangement is implemented as specified.

Typical uses include 10BASE-TX and EtherCAT equipment, compact industrial network interfaces, and communications systems requiring Wake-on-LAN or Energy Efficient Ethernet. The device can also support Synchronous Ethernet designs where the host and line timing architecture are compatible. The manufacturer product page identifies the VSC8540 family as a low-power, small-form-factor copper PHY intended for space-constrained applications.

A key design consideration is signal integrity. Place the PHY, magnetic-interface network components, supply bypassing, clock sources, and high-speed digital interfaces according to the manufacturer reference design. Keep copper traces controlled and minimize discontinuities between the PHY and network connector because Ethernet margins can depend on trace geometry, component placement, and the integrity of the external magnetics.

This page combines the manufacturer product description, package information, interface features, sourcing guidance, and practical implementation considerations in one engineering-focused reference. It also distinguishes the VSC8540XMV-03 from related family members and highlights the parameters that must be checked before PCB reuse or substitution.

Alternativas directas para VSC8540XMV-03 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con VSC8540XMV-03 (mismo factor de forma y huella) — difiere en Energy Efficient Ethernet, Package, Synchronous Ethernet, Product Type, EtherCAT Support.

Microchip Technology
Energy Efficient Ethernet: Supported
Package: 68-QFN, 8 mm × 8 mm
Synchronous Ethernet: Supported
Comparar con VSC8540XMV-03 →
Microchip Technology
Energy Efficient Ethernet: EEE supported
Package: 68-QFN (8 x 8 mm)
Product Type: Single-port Gigabit Ethernet copper PHY
Comparar con VSC8540XMV-03 →
Microchip Technology
Synchronous Ethernet: Supported
Product Type: Single-port Gigabit Ethernet copper PHY
Comparar con VSC8540XMV-03 →
Microchip Technology
Energy Efficient Ethernet: Supported
Package: 68-QFN (8 mm x 8 mm)
Synchronous Ethernet: Supported
Comparar con VSC8540XMV-03 →

VSC8540XMV-04

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 68-QFN (8x8)
Single-port copper Ethernet PHY · 10 Mbps and 100 Mbps · 10BASE-TX and 100BASE-TX · 0.95 V · 2.38 V · 1 copper channel · Supported · Supported

Consulte el precio

Ver hoja de datos →

VSC8540XMV-02

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 68-QFN (8x8)
Same VSC8540 68-QFN platform and copper-PHY architecture; revision option differs, with voltage and current ratings unchanged at 0% where common.

📋 Alternativa de referencia (no en el catálogo)

VSC8541XMV-01

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 68-QFN (8x8)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · 1 port · GMII/RGMII/MII/RMII · EEE supported · Supported · SyncE supported · Integrated

Consulte el precio

Ver hoja de datos →

VSC8541XMV-03

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 68-QFN (8x8)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · 1 port · Copper twisted-pair Ethernet · 1 Gb/s · Supported · Supported · Supported

Consulte el precio

Ver hoja de datos →

VSC8541XMV-04

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 68-QFN (8x8)
Single-port copper Ethernet PHY · 10/100/1000BASE-T · 1 copper port · GMII, RGMII, MII, and RMII · Supported · Supported · Supported · 68-QFN (8 mm x 8 mm)

Consulte el precio

Ver hoja de datos →

VSC8540XMV-03 Especificaciones

Product Type Single-port copper Ethernet PHY
Ethernet Support 10BASE-TX
EtherCAT Support Supported application
Energy Efficient Ethernet IEEE 802.3az supported
Wake-on-LAN Supported
Synchronous Ethernet SyncE supported
FLF2 Indication Supported
Digital Interfaces RGMII, MII
RGMII Timing RGMII version 2.0 standard timing compliant compensation
Line-Side Termination Integrated
Package Type 68-pin QFN
Package Dimensions 8 mm x 8 mm
Tipo de montaje Surface mount

Guía de configuración de pines de VSC8540XMV-03 8 mm x 8 mm

Configuración de pines para VSC8540XMV-03 (encapsulado 8 mm x 8 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 8 mm x 8 mm para VSC8540XMV-03

No hay datos detallados de patillaje disponibles para VSC8540XMV-03.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

VSC8540XMV-03 es adecuado para 6 aplicacións: Compact Industrial Ethernet Interfaces, EtherCAT Equipment Interfaces, Synchronous Ethernet Communications, Low-Power Networked Embedded Systems, Wake-on-LAN Network Equipment, Space-Constrained Communication Terminals.

🏭

Compact Industrial Ethernet Interfaces

The VSC8540XMV-03 fits compact industrial Ethernet interfaces that require a copper PHY without allocating a large board area. Its 68-pin QFN occupies an 8 mm by 8 mm footprint, while the manufacturer identifies the device for space-constrained 10BASE-TX applications. Energy Efficient Ethernet can help compatible links reduce power when traffic permits, and Wake-on-LAN supports systems that must retain network connectivity during reduced operating states. Place the PHY close to the external magnetics and connector, route clock and digital-interface signals according to the reference design, and verify industrial environmental requirements before deployment.

🏭

EtherCAT Equipment Interfaces

The VSC8540XMV-03 is appropriate for compact EtherCAT equipment interfaces because Microchip identifies EtherCAT among the intended applications of the VSC8540 family. The copper PHY combines a compact 8 mm by 8 mm QFN package with RGMII timing compensation, which can remove separate on-board delay lines in applicable RGMII designs. Integrated line-side termination may also reduce board space and electromagnetic interference. Engineering teams should nevertheless validate the exact EtherCAT timing mode, synchronization behavior, clock source, and external magnetic-network requirements against the manufacturer reference design.

🌐

Synchronous Ethernet Communications

The VSC8540XMV-03 supports Synchronous Ethernet, making it relevant to communications equipment that must transfer data with tightly controlled network timing. The device also provides RGMII, MII, and GMII-oriented connectivity and uses RGMII version 2.0 timing compensation to address board-delay requirements in suitable designs. In a synchronous network, the host clock, PHY reference clock, trace lengths, and recovery behavior must operate as one system. Use the manufacturer clocking diagrams and application information to select the proper synchronization mode and determine whether an external clock source or isolation component is required.

🧩

Low-Power Networked Embedded Systems

The VSC8540XMV-03 suits embedded systems where copper networking must coexist with strict board-space and power constraints. IEEE 802.3az Energy Efficient Ethernet provides a standardized mechanism for reducing link energy use in suitable traffic conditions, while the low-power PHY architecture supports the manufacturer positioning of the VSC8540 family. Wake-on-LAN adds remote-activity capability to systems that periodically reduce local processing. The design must include compatible host and switch support, proper termination, stable clocking, and thermal planning so that low-power network functions do not compromise link reliability.

🖥️

Wake-on-LAN Network Equipment

The VSC8540XMV-03 supports Wake-on-LAN for embedded network appliances, controllers, and communications equipment that must detect remote activity without maintaining the entire host system in a fully active state. Its 68-pin, 8 mm by 8 mm QFN package preserves board area for processors and memory, while the copper PHY provides the physical link required for wake signaling. Implement the wake path according to the manufacturer guidelines, including the required host interface support, cable and magnetic-network arrangement, and power-state controls. Validate wake behavior across temperature, cable length, and link-partner conditions during system qualification.

📡

Space-Constrained Communication Terminals

The VSC8540XMV-03 is well suited to communication terminals where connector placement, thermal area, and component density constrain the PCB layout. Its single-row 68-QFN package measures 8 mm by 8 mm, and the integrated line-side termination can reduce the number of discrete network components in an approved configuration. The PHY also offers RGMII timing compensation, reducing the need for separate delay-line components in suitable designs. Layout engineers should preserve the manufacturer’s copper, via, decoupling, and high-speed trace geometry and should verify the external isolation and termination network used with the network transformer.

What is the VSC8540XMV-03?
The VSC8540XMV-03 is a single-port copper Ethernet PHY from Microchip Technology with IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication. According to the manufacturer product page, the device is intended for space-constrained 10BASE-TX and EtherCAT applications. It is offered in a 68-pin QFN package measuring 8 mm by 8 mm and supports RGMII, MII, and GMII-oriented connectivity described for the VSC8540 family.
What are the key specifications of VSC8540XMV-03 that engineers should know?
The VSC8540XMV-03 is a low-power, small-form-factor copper Ethernet PHY with a 68-pin, 8 mm by 8 mm QFN package. According to the Microchip manufacturer datasheet, it supports 10BASE-TX, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication. Its RGMII version 2.0 timing compensation can eliminate separate on-board delay lines, while integrated line-side termination can conserve board area and reduce electromagnetic interference in an applicable reference design.
Where can I download the VSC8540XMV-03 datasheet PDF?
The VSC8540XMV-03 datasheet PDF can be downloaded from the manufacturer-linked document hosted by Mouser. According to the VSC8540-03 manufacturer datasheet, the device is an 8 mm by 8 mm single-row QFN copper PHY for 10BASE-TX and EtherCAT applications. Use the pin-description table, electrical characteristics, reference circuits, and layout guidance in that document before assigning PCB nets or selecting external magnetics.
Where can I find the VSC8540XMV-03 pinout?
The VSC8540XMV-03 pinout is documented in the manufacturer datasheet rather than in the catalog listing summary. The package is an 68-pin QFN measuring 8 mm by 8 mm, so there is no matching 68-pin diagram in the standard package library used for this page. Use the pin-description table and land-pattern guidance in the Microchip datasheet, and verify signal assignments against the exact VSC8540XMV-03 ordering code before fabrication.
Where can I buy VSC8540XMV-03 online?
You can request a quote for the exact VSC8540XMV-03 through the Request a Quote form on this page. The part is listed by Microchip Technology as a 68-QFN Ethernet interface IC, and its manufacturer documentation is linked above. Quote requests are the appropriate route for current unit availability, quantity breaks, and lead time because inventory and commercial terms can change independently of the product documentation.
What is the price of VSC8540XMV-03?
Use the Request a Quote form on this page for the current price of the exact VSC8540XMV-03 and its requested production quantity. The structured pricing panel can be updated without changing the technical description, while the Request a Quote form provides the appropriate channel for a quantity-specific offer. The part number identifies a 68-pin, 8 mm by 8 mm QFN copper Ethernet PHY from Microchip Technology.
What is the lead time for VSC8540XMV-03?
Request the current lead time for VSC8540XMV-03 through the Request a Quote form on this page. Lead time depends on the requested quantity, factory schedule, and confirmed component availability, so it should be established for the current order rather than inferred from an older catalog record. Include your forecast quantities and production schedule in the request so the supplier can return an actionable commitment.
Is VSC8540XMV-03 in stock?
Use the Request a Quote form on this page to request current stock status for VSC8540XMV-03. Inventory status is transactional and can change rapidly, so the presence of a product or distributor listing should not be interpreted as a stock guarantee. Provide the required quantity and target delivery date in the request to obtain a current allocation and delivery response.
VSC8540XMV-03 vs VSC8541XMV-01 - which is better for a space-constrained Ethernet design?
Choose the VSC8540XMV-03 when the design specifically requires its 10BASE-TX, EtherCAT, Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 feature combination. The VSC8541XMV-01 belongs to the related VSC8541 family and should be selected only after its exact data-rate, interface, timing, and pin assignments are checked. Both are associated with the same 8 mm-class copper PHY family, but feature compatibility must be confirmed against the manufacturer documentation.
What is the difference between VSC8540XMV-03 and VSC8540XMV-04?
The VSC8540XMV-03 and VSC8540XMV-04 are ordering variants within the same VSC8540 family, but the suffix can denote a different product revision or configuration. The VSC8540XMV-03 is identified specifically as supporting iTMP, Synchronous Ethernet, and RGMII/MII-oriented operation. According to the Microchip manufacturer datasheet, both relate to the 8 mm by 8 mm QFN VSC8540-03 platform, but a PCB substitution should require a direct comparison of the ordering tables, revision markings, and datasheet changes.
When should I choose VSC8540XMV-03 over a related VSC85xx PHY?
Choose the VSC8540XMV-03 when the system requires a compact 10BASE-TX copper PHY with EtherCAT orientation and the listed low-power features. Its 68-pin, 8 mm by 8 mm QFN construction can simplify space-constrained designs, while integrated line-side termination may reduce board requirements. Select a related VSC85xx device instead when it provides a verified data rate, interface mode, or thermal grade that the VSC8540XMV-03 cannot meet.
Is VSC8540XMV-03 suitable for industrial and EtherCAT equipment?
The VSC8540XMV-03 is suitable for compact 10BASE-TX and EtherCAT equipment because the manufacturer explicitly identifies those applications for the VSC8540 family. Its low-power copper PHY architecture, Energy Efficient Ethernet support, and 8 mm by 8 mm QFN package address space and power constraints in embedded equipment. Validate the exact protocol timing, environmental limits, and certification requirements against the complete manufacturer documentation before production release.
What can replace VSC8540XMV-03?
The closest replacements are verified members of the Microchip VSC8540 family that use the same 68-pin, 8 mm by 8 mm QFN platform and retain the required RGMII, MII, synchronization, and low-power functions. Do not treat a generic Ethernet PHY as a drop-in replacement because regulator rails, clock requirements, register maps, and MAC timing can differ. Confirm the ordering table, pin names, interface mode, reset behavior, and reference circuit in the manufacturer datasheet before changing the PCB.
Can VSC8541XMV-01 replace VSC8540XMV-03?
The VSC8541XMV-01 may be considered as a related same-family option, but it should not be treated as an automatic drop-in replacement for the VSC8540XMV-03. According to the Microchip manufacturer documentation, the family shares compact copper-PHY packaging concepts, while individual ordering codes can differ in supported data rates, interfaces, and options. A replacement requires exact pin, electrical, clocking, protocol, and software-register verification.
What is the best Microchip equivalent for VSC8540XMV-03?
The best Microchip equivalent is the ordering variant that preserves the VSC8540-03 68-pin QFN footprint, RGMII and MII interfaces, line-side termination arrangement, and required synchronization features. Compare VSC8540XMV-04 and qualified VSC8541-family options by their ordering tables rather than by the abbreviated family name. According to the manufacturer datasheet, package identity alone is insufficient because interface mode and revision details determine whether a board can be reused without modification.

Datos de referencia de ingeniería para VSC8540XMV-03 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the VSC8540XMV-03 for a compact 10BASE-TX or EtherCAT design that specifically requires the documented combination of IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, FLF2 indication, RGMII or MII connectivity, and RGMII version 2.0 timing compensation. Its 68-QFN, 8 mm by 8 mm package is particularly useful where board area is constrained. Consider VSC8540XMV-04 or VSC8540XMV-02 when their ordering tables confirm the required feature set and revision status. Evaluate VSC8541XMV-01, VSC8541XMV-03, or VSC8541XMV-04 when their data rate, clocking, register map, and interface modes better match the system. For every candidate, verify the 68-QFN pin assignments, electrical limits, reset and clock behavior, magnetic-network circuit, and reference layout before approving a drop-in PCB change.

Comparación con alternativas

Parámetro Este producto VSC8540XMV-04 VSC8540XMV-02 VSC8541XMV-01 VSC8541XMV-03 VSC8541XMV-04
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8)
Product Type Single-port copper Ethernet PHY Single-port copper Ethernet PHY Single-port copper Ethernet PHY Single-port copper Ethernet PHY Single-port copper Ethernet PHY Single-port copper Ethernet PHY

Diferenciadores clave

  • Compact 68-QFN copper-PHY implementation (frente a VSC8502XML-03)
  • Integrated line-side termination (frente a VSC8540XMV-04)
  • RGMII version 2.0 timing compensation (frente a VSC8541XMV-01)
  • Synchronous Ethernet support (frente a VSC8541XMV-03)

Notas de diseño

Use the manufacturer reference layout as the basis for the 68-QFN land pattern, exposed-pad connection, supply decoupling, and high-speed trace routing. The VSC8540XMV-03 combines RGMII or MII signaling with copper-magnetics connections, so return paths, via placement, and trace geometry should remain continuous. Keep the PHY and its decoupling close to the power source, and prevent digital and analog return currents from sharing an uncontrolled path through the board stack-up.

Follow the manufacturer clocking and RGMII timing guidance when connecting the PHY to the MAC. The VSC8540-03 platform provides RGMII version 2.0 timing compensation, but that feature does not eliminate every routing constraint. Use a stable reference clock, follow recommended trace topology, validate the interface with the intended MAC, and measure eye timing at production boundaries. Adjustable or programmable delay lines are not required in an approved version 2.0 design, but the actual interface mode still must be configured correctly.

Apply the manufacturer’s copper-line termination and magnetic-network arrangement exactly as shown in the reference design. Integrated line-side termination can reduce board area, lower electromagnetic interference, and improve performance when the supported configuration is used. Keep the Ethernet trace route away from switching power nodes and high-speed edges, provide a continuous return plane beneath the interface, and use properly terminated test equipment during compliance measurements.

Design the PHY’s supply rails around the exact ordering-code electrical limits and the host system’s startup sequence. Use the datasheet-recommended capacitance, voltage tolerances, and sequencing for each rail rather than relying on generic Ethernet-PHY practice. Pay particular attention to RGMII clocking and reset behavior during low-power transitions, since Wake-on-LAN and Energy Efficient Ethernet operations can expose power-management bugs that are hidden during continuous full-rate traffic.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer and distributor product information does not provide a definitive compliance statement for this ordering code.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

VSC8540XMV-03 datasheet VSC8540XMV-03 datasheet pdf VSC8540XMV-03 pinout Microchip VSC8540XMV-03 VSC8540XMV-03 68-QFN VSC8540XMV-03 copper PHY VSC8540XMV-03 RGMII VSC8540XMV-03 EtherCAT VSC8540XMV-03 equivalent VSC8540XMV-03 replacement VSC8540XMV-03 vs VSC8541XMV-01 VSC8540XMV-03 price VSC8540XMV-03 stock VSC8540XMV-03 footprint VSC8540XMV-03 application circuit

Componentes & términos relacionados

Microchip Technology VSC8540XMV-03 VSC8540XMV-04 VSC8540XMV-02 VSC8541XMV-01 VSC8541XMV-03 VSC8541XMV-04 Ethernet PHY copper PHY physical-layer transceiver 10BASE-TX EtherCAT IEEE 802.3az Energy Efficient Ethernet Wake-on-LAN Synchronous Ethernet FLF2 indication RGMII MII RGMII version 2.0 line-side termination 68-QFN QFN family surface mount SMD
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ