VSC8540XMV-03 - 1-Port Cu PHY | Microchip Technology
MPN: VSC8540XMV-03 ✓ AktifVSC8540XMV-03 Ringkasan
A copper Ethernet PHY is a physical-layer transceiver that converts digital Ethernet data into signals suitable for transmission over twisted-pair cabling. In the network hierarchy, a PHY operates below the Ethernet MAC and above the physical cable. Its primary functions include line signaling, link negotiation, clock recovery, and recovery from impaired copper links. The VSC8540XMV-03 places these functions in a compact surface-mount package for embedded network equipment.
The VSC8540XMV-03 provides Energy Efficient Ethernet and Wake-on-LAN support, allowing compatible systems to reduce link power when appropriate and preserve network activity during low-power operating states. Synchronous Ethernet support provides a mechanism for maintaining timing relationships in synchronous network architectures. FLF2 indication supplies a fault-related status function for systems that monitor link behavior. These features make the PHY applicable to industrial Ethernet, communications equipment, and embedded EtherCAT designs.
The 8 mm by 8 mm single-row QFN package reduces PCB footprint compared with larger Ethernet transceivers. Its RGMII implementation is identified as compliant with RGMII version 2.0 timing compensation, eliminating the need for separate on-board delay lines in applicable designs. The manufacturer also highlights integrated line-side termination, which can conserve board space, lower electromagnetic interference, and improve system performance when the termination arrangement is implemented as specified.
Typical uses include 10BASE-TX and EtherCAT equipment, compact industrial network interfaces, and communications systems requiring Wake-on-LAN or Energy Efficient Ethernet. The device can also support Synchronous Ethernet designs where the host and line timing architecture are compatible. The manufacturer product page identifies the VSC8540 family as a low-power, small-form-factor copper PHY intended for space-constrained applications.
A key design consideration is signal integrity. Place the PHY, magnetic-interface network components, supply bypassing, clock sources, and high-speed digital interfaces according to the manufacturer reference design. Keep copper traces controlled and minimize discontinuities between the PHY and network connector because Ethernet margins can depend on trace geometry, component placement, and the integrity of the external magnetics.
This page combines the manufacturer product description, package information, interface features, sourcing guidance, and practical implementation considerations in one engineering-focused reference. It also distinguishes the VSC8540XMV-03 from related family members and highlights the parameters that must be checked before PCB reuse or substitution.
Alternatif penggantian untuk VSC8540XMV-03 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian VSC8540XMV-03 (sama faktor bentuk dan footprint) — berbeda di dalam Energy Efficient Ethernet, Package, Synchronous Ethernet, Product Type, EtherCAT Support.
VSC8540XMV-04
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →VSC8540XMV-02
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
VSC8541XMV-01
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →VSC8541XMV-03
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →VSC8541XMV-04
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →VSC8540XMV-03 Spesifikasi
| Product Type | Single-port copper Ethernet PHY |
| Ethernet Support | 10BASE-TX |
| EtherCAT Support | Supported application |
| Energy Efficient Ethernet | IEEE 802.3az supported |
| Wake-on-LAN | Supported |
| Synchronous Ethernet | SyncE supported |
| FLF2 Indication | Supported |
| Digital Interfaces | RGMII, MII |
| RGMII Timing | RGMII version 2.0 standard timing compliant compensation |
| Line-Side Termination | Integrated |
| Package Type | 68-pin QFN |
| Package Dimensions | 8 mm x 8 mm |
| Tipe Mounting | Surface mount |
VSC8540XMV-03 8 mm x 8 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk VSC8540XMV-03 (8 mm x 8 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk VSC8540XMV-03.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
VSC8540XMV-03 cocok untuk 6 aplikasis: Compact Industrial Ethernet Interfaces, EtherCAT Equipment Interfaces, Synchronous Ethernet Communications, Low-Power Networked Embedded Systems, Wake-on-LAN Network Equipment, Space-Constrained Communication Terminals.
Compact Industrial Ethernet Interfaces
The VSC8540XMV-03 fits compact industrial Ethernet interfaces that require a copper PHY without allocating a large board area. Its 68-pin QFN occupies an 8 mm by 8 mm footprint, while the manufacturer identifies the device for space-constrained 10BASE-TX applications. Energy Efficient Ethernet can help compatible links reduce power when traffic permits, and Wake-on-LAN supports systems that must retain network connectivity during reduced operating states. Place the PHY close to the external magnetics and connector, route clock and digital-interface signals according to the reference design, and verify industrial environmental requirements before deployment.
Direkomendasikan
EtherCAT Equipment Interfaces
The VSC8540XMV-03 is appropriate for compact EtherCAT equipment interfaces because Microchip identifies EtherCAT among the intended applications of the VSC8540 family. The copper PHY combines a compact 8 mm by 8 mm QFN package with RGMII timing compensation, which can remove separate on-board delay lines in applicable RGMII designs. Integrated line-side termination may also reduce board space and electromagnetic interference. Engineering teams should nevertheless validate the exact EtherCAT timing mode, synchronization behavior, clock source, and external magnetic-network requirements against the manufacturer reference design.
Direkomendasikan
Synchronous Ethernet Communications
The VSC8540XMV-03 supports Synchronous Ethernet, making it relevant to communications equipment that must transfer data with tightly controlled network timing. The device also provides RGMII, MII, and GMII-oriented connectivity and uses RGMII version 2.0 timing compensation to address board-delay requirements in suitable designs. In a synchronous network, the host clock, PHY reference clock, trace lengths, and recovery behavior must operate as one system. Use the manufacturer clocking diagrams and application information to select the proper synchronization mode and determine whether an external clock source or isolation component is required.
Direkomendasikan
Low-Power Networked Embedded Systems
The VSC8540XMV-03 suits embedded systems where copper networking must coexist with strict board-space and power constraints. IEEE 802.3az Energy Efficient Ethernet provides a standardized mechanism for reducing link energy use in suitable traffic conditions, while the low-power PHY architecture supports the manufacturer positioning of the VSC8540 family. Wake-on-LAN adds remote-activity capability to systems that periodically reduce local processing. The design must include compatible host and switch support, proper termination, stable clocking, and thermal planning so that low-power network functions do not compromise link reliability.
Direkomendasikan
Wake-on-LAN Network Equipment
The VSC8540XMV-03 supports Wake-on-LAN for embedded network appliances, controllers, and communications equipment that must detect remote activity without maintaining the entire host system in a fully active state. Its 68-pin, 8 mm by 8 mm QFN package preserves board area for processors and memory, while the copper PHY provides the physical link required for wake signaling. Implement the wake path according to the manufacturer guidelines, including the required host interface support, cable and magnetic-network arrangement, and power-state controls. Validate wake behavior across temperature, cable length, and link-partner conditions during system qualification.
Direkomendasikan
Space-Constrained Communication Terminals
The VSC8540XMV-03 is well suited to communication terminals where connector placement, thermal area, and component density constrain the PCB layout. Its single-row 68-QFN package measures 8 mm by 8 mm, and the integrated line-side termination can reduce the number of discrete network components in an approved configuration. The PHY also offers RGMII timing compensation, reducing the need for separate delay-line components in suitable designs. Layout engineers should preserve the manufacturer’s copper, via, decoupling, and high-speed trace geometry and should verify the external isolation and termination network used with the network transformer.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk VSC8540XMV-03 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | VSC8540XMV-04 | VSC8540XMV-02 | VSC8541XMV-01 | VSC8541XMV-03 | VSC8541XMV-04 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-QFN (8x8) | 68-QFN (8x8) | 68-QFN (8x8) | 68-QFN (8x8) | 68-QFN (8x8) | 68-QFN (8x8) |
| Product Type | Single-port copper Ethernet PHY | Single-port copper Ethernet PHY | Single-port copper Ethernet PHY | Single-port copper Ethernet PHY | Single-port copper Ethernet PHY | Single-port copper Ethernet PHY |
Diferensiator Kunci
- Compact 68-QFN copper-PHY implementation (vsVSC8502XML-03)
- Integrated line-side termination (vsVSC8540XMV-04)
- RGMII version 2.0 timing compensation (vsVSC8541XMV-01)
- Synchronous Ethernet support (vsVSC8541XMV-03)
Catatan Desain
Use the manufacturer reference layout as the basis for the 68-QFN land pattern, exposed-pad connection, supply decoupling, and high-speed trace routing. The VSC8540XMV-03 combines RGMII or MII signaling with copper-magnetics connections, so return paths, via placement, and trace geometry should remain continuous. Keep the PHY and its decoupling close to the power source, and prevent digital and analog return currents from sharing an uncontrolled path through the board stack-up.
Follow the manufacturer clocking and RGMII timing guidance when connecting the PHY to the MAC. The VSC8540-03 platform provides RGMII version 2.0 timing compensation, but that feature does not eliminate every routing constraint. Use a stable reference clock, follow recommended trace topology, validate the interface with the intended MAC, and measure eye timing at production boundaries. Adjustable or programmable delay lines are not required in an approved version 2.0 design, but the actual interface mode still must be configured correctly.
Apply the manufacturer’s copper-line termination and magnetic-network arrangement exactly as shown in the reference design. Integrated line-side termination can reduce board area, lower electromagnetic interference, and improve performance when the supported configuration is used. Keep the Ethernet trace route away from switching power nodes and high-speed edges, provide a continuous return plane beneath the interface, and use properly terminated test equipment during compliance measurements.
Design the PHY’s supply rails around the exact ordering-code electrical limits and the host system’s startup sequence. Use the datasheet-recommended capacitance, voltage tolerances, and sequencing for each rail rather than relying on generic Ethernet-PHY practice. Pay particular attention to RGMII clocking and reset behavior during low-power transitions, since Wake-on-LAN and Energy Efficient Ethernet operations can expose power-management bugs that are hidden during continuous full-rate traffic.
Informasi Konformitas
The manufacturer and distributor product information does not provide a definitive compliance statement for this ordering code.