AVISO DE ÚLTIMA COMPRA: WM8711CLGEFL/R está próximo al fin de vida. Fecha límite de pedido: Contáctenos. Ver piezas alternativas disponibles →
Cirrus Logic Inc.

WM8711CLGEFL/R - 24-Bit Stereo Audio DAC | Cirrus Logic

N.º de pieza: WM8711CLGEFL/R ✗ Fin de vida
1.42 V to 3.6 V Vdss 28-QFN Package
MOQ: 1 |

WM8711CLGEFL/R Descripción general

The Cirrus Logic WM8711CLGEFL/R is a 24-bit stereo digital-to-analog converter with a 96 kHz maximum sampling rate, DSP processing, and I2S digital audio interfacing in a 28-QFN 5 x 5 mm package. It operates from a 1.42 V to 3.6 V supply and includes stereo headphone and line-input functionality, making it suitable for compact consumer audio systems.

An audio DAC is a digital-to-analog converter, a category of data-conversion IC that transforms digital audio samples into continuous analog voltage signals. In the broader signal-chain hierarchy, it sits between a digital audio source—such as a host controller, USB interface, or digital audio processor—and an analog headphone or line-output amplifier. A stereo DAC supports two independent audio channels, while its DSP functions can perform signal processing before the analog output stage.

The WM8711CLGEFL/R combines a 24-bit conversion format with operation up to 96 kHz. Its I2S interface provides a conventional digital audio connection to a source device, while the integrated DSP adds configurable processing capability. The dual-channel architecture supports stereo playback paths, and the listed headphone and line-in functions allow the device to participate in complete audio signal chains rather than serving only as a basic conversion stage.

The component uses CMOS technology and is packaged in a compact 28-terminal PQCC28-style surface-mount package measuring 5 x 5 mm with a stated 0.85 mm pitch. Its low-voltage 1.42 V to 3.6 V operating range is suitable for portable and embedded audio systems in which supply efficiency and board area are important. The reel suffix identifies the tape-and-reel shipping configuration represented by the WM8711CLGEFL/R ordering code.

Typical uses include digital headphone playback, line-level stereo audio outputs, compact consumer audio equipment, portable media systems, and embedded audio subsystems. In these applications, the I2S interface can receive digital samples from an audio controller, the DSP can perform configured signal processing, and the converter can generate stereo analog signals for downstream amplification. The exact digital format, master-clock requirements, filter configuration, and output topology should be confirmed from the manufacturer datasheet.

Designers should treat the 1.42 V minimum and 3.6 V maximum supply limits as firm operating boundaries. Decoupling, analog-output routing, clock generation, and exposed-pad thermal management must follow the recommended layouts in the manufacturer datasheet. This part has a documented end-of-life notice, so new designs should confirm lifecycle availability and obtain an approved sourcing plan before committing the component to a production BOM.

This page consolidates the confirmed converter architecture, package information, supply limits, lifecycle notice, sourcing guidance, and engineering considerations for engineers evaluating the WM8711CLGEFL/R. It also distinguishes documented device functions from parameters that require direct verification in the manufacturer datasheet, helping teams assess fit before layout work begins.

Alternativas directas para WM8711CLGEFL/R — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

WM8711CLGEFL/R Valores máximos y características eléctricas

Product Type Stereo audio digital-to-analog converter
Converter Resolution 24 bit
Maximum Sampling Rate 96 kHz
Number of Channels 2 channels
Digital Audio Interface I2S
Signal Processing DSP
Supply Voltage Range 1.42 V to 3.6 V
Package Type 28-QFN
Package Dimensions 5 mm x 5 mm
Package Pitch 0.85 mm
Package Form PQCC28
Termination Count 28 terminals
Tipo de montaje Surface mount
Manufacturing Technology CMOS
Integrated Functions Stereo DAC, headphone output, and line input
Tipo de salida Standard

Guía de configuración de pines de WM8711CLGEFL/R pqcc28

Configuración de pines para WM8711CLGEFL/R (encapsulado pqcc28). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado pqcc28 para WM8711CLGEFL/R

No hay datos detallados de patillaje disponibles para WM8711CLGEFL/R.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

WM8711CLGEFL/R es adecuado para 6 aplicacións: Digital Headphone Playback, Stereo Line-Level Audio Output, Portable Media Player, Compact Consumer Audio System, Embedded Audio Interface, Digital Audio Source Module.

🎧

Digital Headphone Playback

The WM8711CLGEFL/R fits digital headphone playback systems that require a dedicated 24-bit stereo conversion stage operating up to 96 kHz. Its I2S interface accepts digital audio from a host or audio processor, while the integrated headphone and DSP functions provide a more complete signal path than a basic fixed-function converter. In a portable design, the 1.42 V to 3.6 V supply range can support a low-voltage audio architecture, and the compact 5 x 5 mm QFN outline helps conserve board area. The implementation must follow the manufacturer recommendations for analog-output routing, filtering, decoupling, exposed-pad grounding, and clock configuration. Engineers should also confirm that the end-of-life status does not conflict with the product’s production schedule.

⚡

Stereo Line-Level Audio Output

The WM8711CLGEFL/R is suitable for generating two analog audio channels from an I2S digital source in line-level playback equipment. Its 24-bit format preserves high-resolution source data, and operation up to 96 kHz accommodates CD-rate and higher-rate digital audio streams. The converter can sit near the line-output stage, reducing the distance over which sensitive analog signals travel before amplification. DSP support permits configurable processing within the conversion stage, while the low-voltage 1.42 V to 3.6 V operating range accommodates compact consumer systems. Layout should prioritize short analog traces, appropriate return paths, stable supply decoupling, and manufacturer-recommended clock routing. Because this MPN is end-of-life, a production design should document the required quantities and obtain a controlled supply commitment.

📱

Portable Media Player

The WM8711CLGEFL/R can serve as the digital-to-analog section of a portable media player when low supply voltage, small footprint, and high-resolution stereo playback are priorities. A digital audio controller can stream 24-bit samples through I2S at rates up to 96 kHz, and the converter can support headphone and line-related audio functions within the same compact design. The 5 x 5 mm QFN package leaves board area for storage, connectivity, and power-management circuitry. Designers should check headphone-drive requirements, analog output levels, clock stability, and passive-component selection against the manufacturer datasheet. Power and thermal planning should account for the complete audio subsystem rather than the converter alone, while careful ground partitioning helps prevent digital and analog crosstalk.

🔧

Compact Consumer Audio System

The WM8711CLGEFL/R fits compact consumer audio systems that need two-channel playback from a digital source. Its 24-bit DAC architecture and 96 kHz maximum rate support modern digital-audio formats, while the integrated DSP allows configurable signal processing ahead of the analog output stage. The two-channel implementation simplifies stereo routing compared with a design requiring separate converter devices. In a space-constrained enclosure, the 28-QFN 5 x 5 mm footprint helps maintain a compact board layout. Exact line-output, headphone, and filtering settings must be selected with the manufacturer guidance, and the exposed pad should be connected according to the recommended thermal and electrical layout. For ongoing production, lifecycle risk should be addressed through approved sourcing rather than an assumption of general distributor availability.

🧩

Embedded Audio Interface

The WM8711CLGEFL/R can provide a stereo analog playback output for embedded systems whose digital controller supports I2S. Its 24-bit resolution and 96 kHz capability make it appropriate for high-quality media playback, notification tones, and mixed digital audio workflows. The integrated DSP provides a configurable processing stage, while line-in and headphone functions support broader signal routing within a compact subsystem. The low 1.42 V to 3.6 V supply range may align with the logic rails used by the surrounding controller, although each rail and sequencing requirement must be confirmed. Board implementation should isolate clock and digital return paths from the analog outputs, place bypass capacitance as directed, and follow the exposed-pad connection pattern. A production schedule should also account for the documented end-of-life status.

🎚️

Digital Audio Source Module

The WM8711CLGEFL/R is appropriate for a dedicated digital-audio source module that translates I2S data into stereo analog signals. The 24-bit conversion format supports detailed digital source information, and the 96 kHz rate ceiling covers high-resolution playback use cases. Integrating conversion, DSP, headphone-related circuitry, and line-input support can shorten the analog path and reduce the number of separate signal-chain components. The device’s 5 x 5 mm QFN footprint supports module miniaturization, but thermal and electrical performance depend on correct exposed-pad soldering and copper layout. Engineers should verify supported master-clock ratios, interface polarity, sample-rate restrictions, and analog filter settings in the manufacturer datasheet. For long-lived products, a supported codec may offer better lifecycle assurance.

Where can I buy the WM8711CLGEFL/R?
The WM8711CLGEFL/R can be requested through the Request a Quote form on this page. Because the device has a documented end-of-life notice, buyers should state the required quantity, reel packaging, delivery location, and production schedule when requesting a quotation. Current commercial terms should be confirmed directly through that form rather than inferred from a historical catalog entry.
What is the price of the WM8711CLGEFL/R?
The current commercial price for the WM8711CLGEFL/R must be obtained through the Request a Quote form on this page. The device is identified in an end-of-life notice, so its quotation may depend on remaining factory inventory, reel quantity, inspection requirements, and delivery schedule. Submit the exact MPN and required annual usage to receive a current quotation.
What is the lead time for the WM8711CLGEFL/R?
The lead time for the WM8711CLGEFL/R should be confirmed through the Request a Quote form on this page. No single lead time can represent every order because availability can vary with reel quantity, traceability, inspection, and production timing. Providing a forecast annual usage and required delivery date allows the sourcing request to be evaluated against available supply.
Is the WM8711CLGEFL/R currently in stock?
Current inventory status for the WM8711CLGEFL/R should be confirmed through the Request a Quote form on this page. The manufacturer issued an end-of-life notice for this MPN, and distributor presence does not by itself establish current stock. Request the desired quantity and packaging configuration, and specify whether factory-sealed reels or inspected stock is required.
What are the key specifications of the WM8711CLGEFL/R that engineers should know?
The WM8711CLGEFL/R is a 24-bit, two-channel stereo DAC supporting sampling rates up to 96 kHz through an I2S interface. According to the Cirrus Logic datasheet, it operates from 1.42 V to 3.6 V and is built on CMOS technology. The device includes DSP, headphone, and line-input functions in a surface-mount 28-QFN package measuring 5 x 5 mm.
What type of device is the WM8711CLGEFL/R?
The WM8711CLGEFL/R is a stereo audio digital-to-analog converter with DSP and an I2S digital interface. It converts digital audio samples into analog stereo signals and supports operation up to 96 kHz. The device also integrates headphone and line-input functionality, placing it between a digital audio source and downstream analog audio amplification.
What are the supply voltage and resolution of the WM8711CLGEFL/R?
The WM8711CLGEFL/R operates from 1.42 V to 3.6 V and uses a 24-bit conversion format. According to the Cirrus Logic datasheet, the converter supports two channels and a maximum sampling rate of 96 kHz. These characteristics make it appropriate for low-voltage digital audio systems that require stereo playback through an I2S interface.
Where can I download the WM8711CLGEFL/R datasheet PDF?
The WM8711CLGEFL/R datasheet PDF is available through the datasheet link on this page. It describes the 24-bit stereo DAC, 96 kHz operation, I2S interface, 1.42 V to 3.6 V supply range, DSP functions, package information, and application guidance. Engineers should use the manufacturer document for final pin assignments, clocking, filtering, and layout decisions.
Where can I find the WM8711CLGEFL/R pinout?
The WM8711CLGEFL/R pin assignments are listed in the pin-description table of the manufacturer datasheet. The package contains 28 terminals in a 5 x 5 mm QFN outline, so the complete pinout must be assigned directly from that table rather than inferred from a generic package drawing. The exposed-pad and ground connections should also follow the manufacturer layout instructions.
Is the WM8711CLGEFL/R suitable for portable audio equipment?
The WM8711CLGEFL/R is suitable for portable audio designs when its 1.42 V to 3.6 V supply range matches the system power architecture. Its compact 5 x 5 mm QFN package also helps conserve board area, while the 24-bit I2S interface supports digital playback from a suitable host. Clock, filtering, and decoupling requirements still need to be checked against the datasheet.
What can replace the WM8711CLGEFL/R?
A valid replacement must match the WM8711CLGEFL/R electrically and physically, including its 28-QFN footprint, pin assignments, I2S interface, and digital-audio functions. The available cross-reference material identifies no independently verified drop-in substitute, so engineers should not treat a generic stereo DAC as a direct replacement. Use the Request a Quote form to discuss sourcing or an approved migration plan for this end-of-life MPN.
Is the WM8711CLGEFL/R the same as the WM8711CLGEFL?
The WM8711CLGEFL/R and WM8711CLGEFL refer to closely related order codes for the same WM8711 device family, with the suffix distinguishing the packaging configuration. The /R code identifies the reel presentation, so it should not be treated as an electrical substitute without checking the orderable part table. Use the manufacturer ordering information when confirming the exact shipped configuration.
When should I choose the WM8711CLGEFL/R for a new design?
Choose the WM8711CLGEFL/R for a new design only when its 24-bit, 96 kHz stereo DAC architecture, 1.42 V to 3.6 V supply range, and 28-QFN footprint match an established design requirement. Because the part is end-of-life, the selection should include a documented sourcing plan and a review of whether a currently supported codec or DAC would reduce long-term supply risk.
WM8711CLGEFL/R versus an active audio codec: which is better?
The WM8711CLGEFL/R is the better match when the design specifically requires a standalone 24-bit stereo DAC with DSP, I2S connectivity, headphone and line-in functions, and a 28-QFN footprint. An active audio codec may be preferable for a new design when integrated ADC, microphone, or current sourcing benefits outweigh moving away from this established end-of-life architecture.
What design constraints should be checked for the WM8711CLGEFL/R?
Designers should verify the 1.42 V to 3.6 V supply range, supported clock and sample-rate configuration, I2S data format, analog output routing, and exposed-pad implementation in the manufacturer datasheet. Component placement should preserve short analog paths and follow the recommended decoupling arrangement. Because the device is end-of-life, the mechanical and electrical design should be frozen early to avoid sourcing-driven rework.

Datos de referencia de ingeniería para WM8711CLGEFL/R — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the WM8711CLGEFL/R when an established design specifically requires a 24-bit stereo DAC operating up to 96 kHz, an I2S interface, integrated DSP, headphone and line-input functions, and the 28-QFN 5 x 5 mm footprint. Its 1.42 V to 3.6 V supply range is useful in compact, low-voltage audio products. However, the documented end-of-life status makes it a weak default choice for a new platform without a controlled sourcing plan. No independently verified drop-in alternative is established here, so an equivalent should not be selected merely because it is another stereo DAC. For a new design, compare the complete I2S interface, clocking, DSP, analog-output, headphone-drive, package, and lifecycle requirements. If the existing board and supply chain are fixed, preserve the WM8711CLGEFL/R footprint and functions; if the platform is new and long-lived, a currently supported audio codec may reduce lifecycle risk.

Comparación con alternativas

Parámetro Este producto
Package 28-QFN (5 x 5 mm)
Brand Cirrus Logic
Converter Resolution 24 bit
Maximum Sampling Rate 96 kHz
Number of Channels 2 channels
Digital Audio Interface I2S
Supply Voltage Range 1.42 V to 3.6 V
Signal Processing DSP
Integrated Audio Functions Headphone and line input
Mounting Type Surface mount

Diferenciadores clave

  • Dedicated stereo DAC integration (frente a Generic active audio codec)
  • High-resolution sampling capability (frente a Lower-resolution stereo DAC)
  • Compact integrated audio functions (frente a Discrete audio conversion stage)

Notas de diseño

Place the WM8711CLGEFL/R close to the source and analog-output circuitry, keep the I2S and clock routes away from sensitive analog outputs, and follow the manufacturer reference layout. The 28-QFN exposed pad is part of the thermal and electrical design and should use the recommended via pattern, solder process, and ground-plane connection. Validate the final stack-up and assembly process before releasing the PCB.

Operate the device only within the documented 1.42 V to 3.6 V supply range. Place the recommended bypass capacitors close to the supply and ground pins, verify startup behavior for the selected supply sequence, and avoid routing switching-current paths through the audio ground area. Because the converter operates from a low-voltage rail, ripple and ground movement can affect analog performance even when the digital interface operates correctly.

Confirm the supported master-clock ratios, I2S format, bit alignment, and sample-rate constraints in the manufacturer datasheet before fixing the host interface. Use continuous reference planes and minimize stubs on digital lines, and provide a clean return path beneath clock and data routes. Analog output filtering and output loading must also follow the documented implementation so that measured bandwidth and distortion match the design intent.

Do not confuse a similar order code with a verified drop-in replacement, and do not infer pin compatibility from the shared 28-QFN outline alone. The WM8711CLGEFL/R is identified in an end-of-life notice; teams should freeze the electrical and mechanical design early, document exact reel requirements, and obtain an approved supply plan. Any migration candidate must be checked pin by pin and against clock, DSP, headphone, and analog-output requirements.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The verified product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this consumer audio converter.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

WM8711CLGEFL/R datasheet WM8711CLGEFL/R pinout WM8711CLGEFL/R datasheet pdf WM8711CLGEFL/R specifications WM8711CLGEFL/R 24 bit 96kHz WM8711CLGEFL/R 28-QFN pinout WM8711CLGEFL/R equivalent WM8711CLGEFL/R replacement WM8711CLGEFL/R price WM8711CLGEFL/R stock Cirrus Logic WM8711CLGEFL/R WM8711CLGEFL/R application circuit

Componentes & términos relacionados

Cirrus Logic WM8711CLGEFL/R WM8711CLGEFL Wolfson Microelectronics stereo DAC digital-to-analog converter audio converter IC data-conversion IC I2S digital audio interface DSP 24-bit conversion 96 kHz sampling rate headphone output line input 1.42 V to 3.6 V supply CMOS 28-QFN PQCC28 QFN family surface mount SMD portable audio consumer audio
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ