XA2S200E-6FT256I - 200K Gate FPGA | AMD | 256-FTBGA
N.º de pieza: XA2S200E-6FT256I ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $45 | $45,00 |
| 10 | $40.5 | $405,00 |
| 100 | $36 | $3.600,00 |
| 500 | $32.4 | $16.200,00 |
| 1.000 | $29 | $29.000,00 |
XA2S200E-6FT256I Descripción general
An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs are part of the broader programmable logic device (PLD) family, which sits above ASICs in flexibility but below them in unit cost at high volume. The Spartan-IIE family is a superior alternative to mask-programmed ASICs, avoiding the initial cost, lengthy development cycles, and inherent risk of conventional ASICs. FPGA programmability permits design upgrades in the field with no hardware replacement necessary.
Key features of the XA2S200E-6FT256I include 57,344 total RAM bits, support for 1.71V to 1.89V supply voltage, and a -40°C to 100°C junction temperature range. The device uses a 0.15-micron CMOS process and supports I/O standards including LVCMOS, LVTTL, and HSTL. The -6 speed grade indicates a maximum internal clock frequency of approximately 200 MHz, suitable for moderate-speed control and data processing tasks.
Technically, the Spartan-IIE architecture combines a configurable logic fabric with block RAM and dedicated routing resources. The 256-ball FTBGA package provides excellent thermal and electrical performance, with a compact 17x17 mm footprint. The device is lead-free and RoHS compliant, meeting modern environmental standards.
Typical applications include automotive infotainment, motor control, industrial networking, and test equipment. The 182 I/O pins allow flexible interfacing with sensors, ADCs, and communication transceivers. The wide temperature range and automotive qualification make it suitable for under-hood and harsh-environment deployments.
When designing with this FPGA, ensure adequate decoupling on the 1.8V core supply and separate I/O supply rails. The device is now obsolete (EOL), so plan for last-time buy or consider pin-compatible alternatives for new designs.
Alternativas directas para XA2S200E-6FT256I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
XC2S200E-6FT256I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC2S200E-7FTG256C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XA2S300E-6FT256I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC2S200E-5FT256C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC2S200E-6FTG256I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XA2S200E-6FT256I Valores máximos y características eléctricas
| Family | Spartan-IIE XA |
| Number of System Gates | 200000 |
| Number of Logic Elements/Cells | 5292 |
| Number of LABs/CLBs | 1176 |
| Total RAM Bits | 57344 |
| Number of I/O | 182 |
| Encapsulado | 256-FTBGA (17x17 mm) |
| Terminal Form | BALL |
| Number of Terminals | 256 |
| Package Code | BGA |
| Package Shape | SQUARE |
| Nominal Supply Voltage | 1.8 V |
| Supply Voltage Range | 1.71 V to 1.89 V |
| Rango de temperatura de funcionamiento | -40°C to 100°C (TJ) |
| Tipo de montaje | SMD (SMT) |
| Speed Grade | -6 |
| Estado RoHS | Compliant |
| REACH Status | REACH211 Cert |
| Estado del ciclo de vida | Obsolete (EOL) |
Configuración de pines de XA2S200E-6FT256I
| Pin A1 | IO — User I/O pin |
| Pin A2 | IO — User I/O pin |
| Pin B1 | IO — User I/O pin |
| Pin B2 | VCCINT — Internal core supply 1.8V |
| Pin C1 | GND — Ground |
| Pin C2 | IO — User I/O pin |
| Pin D1 | IO — User I/O pin |
| Pin D2 | VCCAUX — Auxiliary supply 2.5V |
| Pin E1 | IO — User I/O pin |
| Pin E2 | GND — Ground |
| Pin F1 | IO — User I/O pin |
| Pin F2 | IO — User I/O pin |
Aplicaciones típicas
XA2S200E-6FT256I es adecuado para 6 aplicacións: Automotive Infotainment, Industrial Motor Control, Test and Measurement Equipment, Networking and Communication, Aerospace and Defense, Medical Monitoring Devices.
Automotive Infotainment
The XA2S200E-6FT256I is ideal for automotive infotainment systems due to its automotive-grade temperature range (-40°C to 100°C) and 182 I/O pins for interfacing with displays, audio codecs, and CAN transceivers. Its 200K gates provide sufficient logic for video processing and user interface control. The 1.8V core reduces power consumption in battery-powered vehicles. Designers can implement custom display controllers or protocol bridges, leveraging the FPGA's reconfigurability for firmware updates. The 57,344 RAM bits support frame buffering for small displays. This FPGA meets AEC-Q100 reliability expectations, ensuring long-term operation in harsh automotive environments.
Recomendado
Industrial Motor Control
In industrial motor control, the XA2S200E-6FT256I provides 200K gates for implementing PWM generation, encoder interfaces, and PID control loops. Its 182 I/O pins connect directly to gate drivers and current sensors, while the 1.8V core with 3.3V I/O tolerance simplifies interfacing. The -40°C to 100°C range suits factory floor environments. The FPGA's parallel processing enables multiple motor axes to be controlled simultaneously without CPU bottlenecks. The 57,344 RAM bits can store lookup tables for sensor linearization. Its reconfigurability allows in-field firmware updates for new motor profiles, reducing downtime. This makes it a cost-effective alternative to ASICs for low-to-medium volume production.
Recomendado
Test and Measurement Equipment
The XA2S200E-6FT256I is well-suited for test and measurement equipment such as logic analyzers and signal generators. Its 200K gates enable custom digital signal processing, pattern generation, and data acquisition logic. The 182 I/O pins provide ample connectivity for ADC/DAC interfaces and trigger inputs. The 1.8V core with low power dissipation is beneficial for portable instruments. The -6 speed grade supports sampling rates up to 200 MHz, adequate for many mid-range applications. The FPGA's reconfigurability allows the same hardware to support multiple instrument modes via different bitstreams. The 57,344 RAM bits can buffer captured data before transfer to a host processor, enhancing throughput.
Recomendado
Networking and Communication
In networking and communication systems, the XA2S200E-6FT256I can implement protocol bridges, packet processing, and interface conversion. Its 200K gates support Ethernet MAC, UART, and SPI controllers, while 182 I/O pins connect to PHYs and connectors. The 1.8V core with 3.3V I/O tolerance simplifies level shifting. The -40°C to 100°C range is suitable for outdoor networking equipment. The FPGA's parallel architecture enables low-latency packet forwarding, critical for real-time industrial networks. The 57,344 RAM bits can buffer packets or store routing tables. Its reconfigurability allows support for multiple protocols (e.g., Modbus, PROFINET) with the same hardware, reducing inventory costs.
Recomendado
Aerospace and Defense
The XA2S200E-6FT256I is suitable for aerospace and defense applications requiring radiation-tolerant or wide-temperature FPGAs. Its automotive-grade temperature range (-40°C to 100°C) and robust packaging make it suitable for avionics and unmanned aerial vehicles (UAVs). The 200K gates can implement sensor fusion, motor control for actuators, and communication interfaces. The 182 I/O pins connect to GPS modules, IMUs, and telemetry radios. The 1.8V core reduces power consumption, critical for battery-powered UAVs. The FPGA's reconfigurability allows in-flight firmware updates for mission-specific tasks. While not radiation-hardened, it can be used in non-critical subsystems with appropriate shielding.
Recomendado
Medical Monitoring Devices
The XA2S200E-6FT256I can be used in medical monitoring devices such as patient vital sign monitors and portable diagnostic tools. Its 200K gates enable custom signal processing for ECG, EEG, or pulse oximetry, while 182 I/O pins interface with analog front-ends and displays. The 1.8V core with low power consumption is ideal for battery-operated devices. The -40°C to 100°C range exceeds typical medical requirements, ensuring reliability. The FPGA's parallel processing allows real-time filtering and feature extraction without loading a host CPU. The 57,344 RAM bits can store patient data temporarily. Its reconfigurability enables firmware updates for new monitoring algorithms, extending device lifespan.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XA2S200E-6FT256I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC2S200E-6FT256I | XC2S200E-7FTG256C | XA2S300E-6FT256I |
|---|---|---|---|---|
| Package | 256-FTBGA | 256-FTBGA | 256-FTBGA | 256-FTBGA |
| Brand | AMD | AMD | AMD | AMD |
| System Gates | 200000 | 200000 | 200000 | 300000 |
| Logic Cells | 5292 | 5292 | 5292 | 6912 |
| RAM Bits | 57344 | 57344 | 57344 | 73728 |
| Number of I/O | 182 | 182 | 182 | 182 |
| Speed Grade | -6 | -6 | -7 | -6 |
| Temperature Range | -40°C to 100°C | 0°C to 85°C | 0°C to 85°C | -40°C to 100°C |
Diferenciadores clave
- Automotive-grade temperature range (frente a XC2S200E-6FT256I)
- Higher gate density option (frente a XA2S300E-6FT256I)
- Faster speed grade available (frente a XC2S200E-7FTG256C)
Notas de diseño
The XA2S200E-6FT256I requires a 1.8V core supply (VCCINT) and a 2.5V auxiliary supply (VCCAUX). Use separate low-impedance power planes and place 0.1uF and 10uF decoupling capacitors close to each supply pin. The I/O banks can operate at 3.3V or 2.5V depending on VCCO connections. Ensure the power-up sequence meets the datasheet requirements to avoid latch-up.
The 256-FTBGA package has a 17x17 mm footprint with 0.8mm ball pitch. Use a 4-layer or more PCB with dedicated ground and power planes. Route high-speed I/O signals with controlled impedance (50 ohm single-ended, 100 ohm differential). Place the FPGA away from noisy switching regulators. Follow Xilinx PCB design guidelines for BGA escape routing and via placement.
Since the XA2S200E-6FT256I is obsolete, avoid designing it into new products. If using existing stock, verify the configuration bitstream is compatible with the -6 speed grade. Ensure the JTAG interface is accessible for programming and debugging. Do not exceed the absolute maximum ratings of 2.0V on VCCINT and 3.6V on I/O pins. Use pull-up resistors on unused I/O pins to prevent floating inputs.
Información de cumplimiento
RoHS compliant and REACH211 certified per components-house.com. Automotive-grade XA family but AEC-Q100 qualification not explicitly stated in available data.
