XA6SLX75-2CSG484Q - Automotive Spartan-6 LX FPGA | AMD
N.º de pieza: XA6SLX75-2CSG484Q ✓ ActivoXA6SLX75-2CSG484Q Descripción general
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and I/O can be configured after fabrication. The Spartan-6 LX FPGA family combines programmable logic blocks, block RAM, dedicated DSP slices, and general-purpose I/O in a single package. This device family sits within the broader hierarchy of programmable logic devices, alongside CPLDs, and is commonly used where deterministic parallel processing, flexible interfaces, and product-upgrade flexibility are more important than the power efficiency of an ASIC.
The XA6SLX75 configuration provides 74,637 logic cells and 328 I/O, making it suitable for consolidating multiple fixed-function sections into one programmable device. Its automotive designation supports applications requiring enhanced reliability and temperature qualification. The 484-FBGA CSPBGA package also exposes the high-density I/O required for communications, control, data acquisition, and industrial automation systems without requiring a larger board footprint than comparable high-pin-count alternatives.
The 1.2 V core architecture supports modern FPGA power-management and configuration methods. Because this is a -2 speed-grade device, designs must be constrained with the correct timing models, and timing closure should be checked against the selected I/O standard, clocking architecture, and operating temperature. Spartan-6 devices rely on configuration data stored in external flash or loaded by a processor, so the complete design must include a valid bitstream, startup sequence, and configuration interface.
Typical uses include automotive gateway and infotainment control, industrial instrumentation, motor-control supervisory logic, test equipment, and embedded control platforms. In an automotive controller, the FPGA can merge sensor conditioning logic, communication gateways, and safety monitoring while allowing firmware updates through configuration reload. In industrial systems, its parallel I/O can reduce the number of discrete interface components and shorten development cycles.
PCB design should follow the AMD Spartan-6 package and pinout documentation, including the exact 484-ball land pattern, power-plane connections, decoupling requirements, and high-speed configuration constraints. Validate signal integrity for every transceiver or memory interface, preserve the required power and ground connectivity, and test bitstream loading across the complete voltage and temperature range before production release.
This page consolidates device specifications, practical implementation guidance, comparison criteria, and verified sourcing information. It is intended to help engineers determine board compatibility, qualify the automotive-grade option, and plan a complete FPGA implementation without overlooking package-level or configuration-system constraints.
Alternativas directas para XA6SLX75-2CSG484Q — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XA6SLX75-2CSG484Q (mismo factor de forma y huella) — difiere en Device Type, Automotive Qualification, User I/O, FPGA Family, Package.
XA6SLX75-2FGG484Q
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XA6SLX75-3CSG484Q
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XA6SLX75-2FGG484C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XA6SLX75-2FGG484I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX75-2FGG484C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XA6SLX75-2CSG484Q Valores máximos y características eléctricas
| Device Type | Spartan-6 LX automotive FPGA |
| Logic Cells | 74,637 cells |
| User I/O | 328 I/O |
| Core Supply Voltage | 1.2 V |
| Process Technology | 45 nm CMOS |
| Speed Grade | -2 |
| Temperature Grade | Q automotive grade |
| Automotive Qualification | AEC-Q100 |
| Encapsulado | 484-FBGA CSPBGA |
| Package Pin Count | 484 pins |
| Device Family | Spartan-6 LX XA |
| Programmable Logic | 74,637 logic cells |
| Architecture | 45 nm CMOS FPGA |
Guía de configuración de pines de XA6SLX75-2CSG484Q 484 pins
Configuración de pines para XA6SLX75-2CSG484Q (encapsulado 484 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XA6SLX75-2CSG484Q.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XA6SLX75-2CSG484Q es adecuado para 6 aplicacións: Automotive Central Gateway, Industrial Data Acquisition, Motor Control and Protection, Test and Measurement Instrumentation, Communications Interface Consolidation, Embedded Vision and Sensor Fusion.
Automotive Central Gateway
The XA6SLX75-2CSG484Q fits an automotive gateway that must coordinate multiple vehicle networks and diagnostic functions. Its 74,637 logic cells can support protocol conversion, routing logic, message filtering, and supervisory functions in one programmable device, while 328 user I/O provide substantial connectivity for sensors and companion transceivers. The -2 speed grade and automotive Q designation align the part with vehicle programs requiring a defined qualification basis. Engineers should use the AMD Spartan-6 pinout file to assign the 484 package balls, then verify power sequencing, clock jitter tolerance, I/O standards, and bitstream loading under automotive voltage and temperature conditions.
Recomendado
Industrial Data Acquisition
The XA6SLX75-2CSG484Q can consolidate high-channel-count industrial measurement and control logic because 328 user I/O provide ample parallel connectivity. The Spartan-6 LX device can implement simultaneous sampling control, digital filtering, trigger sequencing, and communication framing without requiring numerous discrete controllers. Its 74,637 logic cells allow substantial parallelism, and the 1.2 V core architecture supports common FPGA power-management practices. The 484-FBGA CSPBGA package requires careful escape routing and a multilayer PCB, so analog isolation, grounding, clock distribution, and high-speed interface integrity should be evaluated before release.
Recomendado
Motor Control and Protection
The XA6SLX75-2CSG484Q is suitable for supervisory motor-control systems that combine digital protection, current sensing, position processing, and communications. Its 74,637 logic cells provide enough parallel capacity for timing-critical sequencing and fault handling, while 328 user I/O simplify connections to gate drivers, position sensors, and monitoring circuits. The automotive-grade Q configuration is useful when the same control architecture is deployed in road vehicles or harsh mobile equipment. Use the -2 timing model during synthesis and static timing analysis, and validate safe-state behavior, input tolerances, isolation boundaries, and shutdown sequencing in the final power architecture.
Recomendado
Test and Measurement Instrumentation
The XA6SLX75-2CSG484Q can serve as the central programmable engine in automated test equipment, with 328 user I/O supporting pattern generation, acquisition control, timing sequencing, and communication channels. The 74,637-cell Spartan-6 LX architecture permits parallel datapaths that shorten test time compared with a sequential microcontroller implementation. Its 1.2 V core and 45 nm CMOS construction fit modern high-speed FPGA platforms, while the -2 grade defines the timing constraints used in place-and-route analysis. The dense 484-FBGA footprint demands a multilayer board, matched-length routes for precision interfaces, and careful power-distribution-network design.
Recomendado
Communications Interface Consolidation
The XA6SLX75-2CSG484Q is well suited to communications equipment requiring programmable protocol conversion and many parallel interface connections. Its 328 user I/O can support parallel buses, control signals, and multiple transceiver-facing interfaces, while 74,637 logic cells accommodate framing, buffering, and error handling. Designers can use the same FPGA platform across product variants by changing the bitstream rather than redesigning fixed logic. Because the package provides only 484 balls for a large logic device, high-speed routes should be length matched, interface standards selected conservatively, and power and ground planes arranged to minimize reference-plane discontinuities.
Recomendado
Embedded Vision and Sensor Fusion
The XA6SLX75-2CSG484Q can implement sensor-fusion preprocessing, timing control, and data-format conversion in industrial or mobile vision systems. Its 74,637 logic cells provide parallel resources for image pre-processing, feature extraction, and interface control, while 328 user I/O allow direct connection to sensors and capture devices. The automotive Q designation makes the device suitable for evaluation in vehicle sensing and assistance platforms, subject to the exact temperature range and system validation required. Layout planning should prioritize camera or sensor-clock routing, source-synchronous interfaces, return paths, and programmable-logic access to memory before placing peripheral circuitry.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XA6SLX75-2CSG484Q — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XA6SLX75-2FGG484Q | XA6SLX75-3CSG484Q | XA6SLX75-2FGG484C | XA6SLX75-2FGG484I | XC6SLX75-2FGG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-FBGA CSPBGA | 484-FBGA CSPBGA | 484-FBGA CSPBGA | 484-FBGA CSPBGA | 484-FBGA CSPBGA | 484-FBGA CSPBGA |
| Logic Cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells | 74,637 cells |
| User I/O | 328 I/O | 328 I/O | 328 I/O | 328 I/O | 328 I/O | 328 I/O |
| Speed Grade | -2 | -2 | -3 | -2 | -2 | -2 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Device Family | Spartan-6 LX XA | Spartan-6 LX XA | Spartan-6 LX XA | Spartan-6 LX XA | Spartan-6 LX XA | Spartan-6 LX |
Diferenciadores clave
- Automotive-qualified part designation (frente a XC6SLX75-2FGG484C)
- Exact -2 speed-grade positioning (frente a XA6SLX75-3CSG484Q)
- High-density logic and I/O combination (frente a XA6SLX75-2FGG484C)
Notas de diseño
Use the official AMD Spartan-6 484-CSG package file to generate the land pattern and verify every ball assignment before PCB release. A 484-ball CSPBGA generally requires escape routing and multiple signal layers, so reserve buried or through vias directly beneath the device where layer changes are needed. Confirm the exposed thermal-ball pattern, keep the board outline and component keepout aligned with the package drawing, and perform a stackup-aware review of escape-track widths and antipads.
Separate the 1.2 V core rail from other supply domains exactly as specified by the AMD Spartan-6 architecture and board-design guidance. Place decoupling capacitance close to the associated power and ground balls, provide low-impedance power and ground planes, and avoid plane splits beneath high-speed routes. Validate steady-state and transient behavior with worst-case logic activity and I/O loading. Configuration and auxiliary rails must also meet their ramp, sequencing, and leakage requirements rather than assuming that every rail can be tied to the core supply.
Do not treat the CSG, FGG, Q, C, and I suffix differences as cosmetic. Check the mechanical package, speed grade, temperature range, qualification status, and lifecycle requirements separately before substituting one MPN for another. The -3 device may provide additional timing margin but should not be treated as a necessary functional replacement for a specifically constrained -2 design. Likewise, a non-XA XC6SLX75 device may match logic resources while differing in program qualification and support positioning.
Plan the configuration path before finalizing the ballout. Keep the configuration interface routing short and clean, follow the AMD guidance for the supported configuration memories or processors, and account for startup time in control-software assumptions. For high-speed memory or transceiver interfaces, use length-matched topology, continuous reference planes, and via transitions placed according to the selected interface specification. Run signal-integrity and power-integrity simulations on the final stackup rather than validating only the schematic connectivity.
Información de cumplimiento
The XA6SLX75-2CSG484Q is listed as an AEC-Q100 automotive FPGA. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the cited product information.