XC2C32A-6QFG32C - 32-Macrocell Low-Power CPLD | AMD
N.º de pieza: XC2C32A-6QFG32C ✗ Fin de vidaXC2C32A-6QFG32C Descripción general
A CPLD, or complex programmable logic device, is a user-programmable semiconductor within the broader programmable-logic hierarchy. Unlike a mask-programmed logic device, a CPLD retains a configurable Flash architecture and can be programmed or reprogrammed to implement control, decoding, glue logic, and interface functions. The CoolRunner-II family combines nonvolatile configuration storage, macrocell-based logic, and a compact package suited to space-constrained embedded systems.
Key features include as many as 32 macrocells, two function blocks, 21 available I/O, and 56 product terms per macrocell. The device is built on an advanced 0.18 µm CMOS Flash process and is optimized for 1.8 V systems. Its pin-to-pin logic delay can reach 3.8 ns, while another source identifies a 5.5 ns propagation delay for the -6 speed grade. A 32-pin QFN package with a 0.50 mm pitch keeps the component compact while supporting a 200 MHz-class implementation target.
The XC2C32A combines a deterministic macrocell architecture with hot-pluggable PLA characteristics, broad product-term routing, and strong pinout retention. These characteristics make it useful when the design must tolerate configuration changes, preserve board-level assignments, or implement several related Boolean functions without using a larger FPGA. Its Flash-based configuration also allows the device to retain its programmed logic when power is removed.
Typical applications include portable instrumentation, industrial control interfaces, peripheral bus decoding, display and keypad control, embedded system glue logic, and compact consumer electronics. The 21-I/O configuration is especially useful for designs that need moderate logic density, multiple independently routed signals, and low standby power rather than the extensive resources of an FPGA.
When laying out a board, use the manufacturer's QFG32 pin-assignment table and preserve the exposed thermal-pad and ground requirements shown in the package drawing. Validate every I/O voltage against the selected bank and external-interface requirements. Programming tools, constraints, and any legacy software must also be checked against the CoolRunner-II support matrix before release.
This page combines device specifications, lifecycle context, same-footprint alternatives, practical implementation guidance, and direct technical comparisons. It is intended to help engineers identify the correct CoolRunner-II option, plan a drop-in replacement, and avoid compatibility errors involving speed grade, package, or temperature range.
Alternativas directas para XC2C32A-6QFG32C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC2C32A-6QFG32C (mismo factor de forma y huella) — difiere en Speed Grade, Device Type, Package, Process Technology.
XC2C32A-4QFG32C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC2C32A-6QFG32I
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC2C32A-5QFG32C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC2C32A-7QFG32C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC2C32A-8QFG32C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC2C32A-6QFG32C Valores máximos y características eléctricas
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Macrocell Count | 32 macrocells |
| System Gates | 750 gates |
| Function Block Count | 2 function blocks |
| User I/O Count | 21 I/O |
| Product Terms per Macrocell | 56 product terms |
| Process Technology | 0.18 µm CMOS Flash |
| Optimization | 1.8 V systems |
| I/O Standards | SSTL2_1 and SSTL3_1 |
| Pin-to-Pin Logic Delay | 3.8 ns minimum |
| Propagation Delay | 5.5 ns |
| Speed Grade | -6 grade |
| Architecture | Hot-pluggable PLA architecture |
| Programmability | In-system programmable |
| Encapsulado | 32-pin QFN (QFG32), 5 mm × 5 mm |
| Package Pitch | 0.50 mm |
| Lead-Free Status | Lead Free |
| Estado RoHS | RoHS Compliant |
Guía de configuración de pines de XC2C32A-6QFG32C 0.50 mm
Configuración de pines para XC2C32A-6QFG32C (encapsulado 0.50 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC2C32A-6QFG32C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC2C32A-6QFG32C es adecuado para 6 aplicacións: Embedded System Glue Logic, Portable Instrumentation, Industrial Peripheral Interface, Display and Keypad Control, Consumer Power Sequencing, Secure Authentication and Control.
Embedded System Glue Logic
The XC2C32A-6QFG32C fits compact embedded systems that need several control, decode, and state-machine functions without allocating a larger programmable-logic device. Its 32 macrocells, two function blocks, and 21 user I/O provide sufficient resources for peripheral selection, latch logic, interrupt qualification, and address decoding. The 5 mm × 5 mm QFG32 package also preserves board area when the design is already constrained by a fine-pitch assembly. Timing should be checked against the 5.5 ns propagation-delay listing and the relevant -6 timing tables before logic is committed. Because configuration is retained in Flash, the implemented functions remain available after power is removed, which is useful during boot-up, power sequencing, and fault-recovery workflows.
Recomendado
Portable Instrumentation
The XC2C32A-6QFG32C is appropriate for portable measurement instruments that combine low-power operation with a compact programmable-logic section. Its 32 macrocells can implement trigger logic, measurement sequencing, signal routing, status decoding, and interface control while the -6 grade supports faster timing paths than the -4 grade. The QFG32 footprint measures only 5 mm × 5 mm, helping preserve space for sensors, display circuitry, and power management. Designers should still account for I/O voltage, input thresholds, output drive, and power-gating behavior under the actual battery operating profile. The device is most useful when the required logic is deterministic and small, not when the instrument needs deep memory, soft processors, or high-speed serial transceivers.
Recomendado
Industrial Peripheral Interface
The XC2C32A-6QFG32C can implement deterministic interface logic in industrial peripheral modules that require nonvolatile configuration and modest I/O count. Its 21 user I/O can support device selection, bus transceivers, direction control, interrupt handling, and status multiplexing, while the 32 macrocells provide more Boolean capacity than a simple single-function gate. The -6 grade is preferable where propagation delay must be constrained, and the Flash-based CoolRunner-II architecture allows board-level logic to be changed without replacing the device. For industrial deployment, confirm whether the commercial C suffix covers the actual ambient range; otherwise use the industrial ordering option. Also validate isolation, surge requirements, and grounding outside the CPLD rather than relying on the programmable logic for protection.
Recomendado
Display and Keypad Control
The XC2C32A-6QFG32C is well suited to display scanning, keypad decoding, indicator control, and touch-interface glue logic. A 32-macrocell implementation can maintain display timing, multiplex indicators, debounce keypad inputs, and coordinate interrupt signals without occupying a high-performance microcontroller’s pins. The 21-I/O capacity allows several display and control signals to share the compact 5 mm × 5 mm QFG32 package, although the exact mixed-voltage assignments must follow the device’s bank rules. Timing validation should cover display strobe pulse width and setup requirements at the selected I/O voltage. For very large matrices or high-refresh-rate graphics, move the timing generator to dedicated display circuitry and retain the CPLD for supervisory control and bus adaptation.
Recomendado
Consumer Power Sequencing
The XC2C32A-6QFG32C can implement power-up sequencing, reset coordination, rail-enable logic, and fault reporting in a compact consumer or industrial controller. Its Flash configuration provides deterministic behavior after power restoration, while 21 I/O are sufficient for monitoring multiple reset and power-good signals. The CPLD can combine asynchronous input qualification with sequential control, reducing the pin burden on a host processor. Designers should establish every external I/O voltage before layout because the device supports multi-voltage operation but does not remove the need for level translation. Validate timing against the -6 grade and make reset behavior fail-safe, with a defined external supervisor capable of holding the system in a safe state if the programmed sequence is interrupted.
Recomendado
Secure Authentication and Control
The XC2C32A-6QFG32C can add nonvolatile control logic for authentication, accessory detection, key capture, or programmable security sequences in compact embedded products. Thirty-two macrocells are adequate for multiple state machines and Boolean checks, and the Flash-based configuration preserves selected logic through power cycles. The CPLD may interface an external cryptographic component, validate device presence, and mediate commands to the host microcontroller. For security-critical designs, review the configured logic for unintended states, ensure sensitive test points and debug access are controlled, and consider adding a hardware tamper mechanism. Timing should be checked for all paths between external devices and the -6 grade limits, especially where authentication decisions gate power or communications.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC2C32A-6QFG32C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC2C32A-4QFG32C | XC2C32A-6QFG32I | XC2C32A-5QFG32C | XC2C32A-7QFG32C | XC2C32A-8QFG32C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 32-pin QFN (QFG32) | 32-pin QFN (QFG32) | 32-pin QFN (QFG32) | 32-pin QFN (QFG32) | 32-pin QFN (QFG32) | 32-pin QFN (QFG32) |
| Device Family | CoolRunner-II | CoolRunner-II | CoolRunner-II | CoolRunner-II | CoolRunner-II | CoolRunner-II |
| Macrocell Count | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells |
| System Gates | 750 gates | 750 gates | 750 gates | 750 gates | 750 gates | 750 gates |
| User I/O | 21 I/O | 21 I/O | 21 I/O | 21 I/O | 21 I/O | 21 I/O |
| Speed Grade | -6 | -4 | -6 | -5 | -7 | -8 |
| Temperature Ordering Option | C commercial suffix | C commercial suffix | I industrial suffix | C commercial suffix | C commercial suffix | C commercial suffix |
| Programmability | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Process Technology | 0.18 µm CMOS Flash | 0.18 µm CMOS Flash | 0.18 µm CMOS Flash | 0.18 µm CMOS Flash | 0.18 µm CMOS Flash | 0.18 µm CMOS Flash |
Diferenciadores clave
- Faster timing grade within the same QFG32 footprint (frente a XC2C32A-4QFG32C)
- Commercial temperature ordering option (frente a XC2C32A-6QFG32I)
- Same-package logic density and interface count (frente a XC2C32A-6VQG44C)
Notas de diseño
Route all QFG32 connections according to the numbered package drawing in AMD DS310 rather than a generic QFN layout. The package is 5 mm × 5 mm with a 0.50 mm pitch, leaving little assembly tolerance for fanout errors. Preserve the package thermal-pad and ground arrangement shown by the manufacturer, and inspect exposed-pad soldering after assembly. Confirm pin numbering in both the PCB CAD library and the device schematic before releasing artwork.
A same-footprint alternative is not automatically a functionally approved substitute. The -4 and -5 speed grades are slower than -6 and can break paths that have little timing margin, while an industrial suffix changes the environmental qualification rather than the footprint. Rerun static timing analysis at the intended I/O voltage and temperature, confirm configuration compatibility, and verify every external pin assignment. Never substitute the -6VQG44C without changing the PCB footprint.
Calculate the CPLD’s worst-case supply demand from the configured logic, I/O activity, speed grade, and selected power mode rather than relying on a generic device current. Account for rail sequencing so output pins do not receive external signals while the core supply is below its operating range. Use the AMD DS310 recommended operating conditions and absolute maximum ratings, and provide local bulk and bypass capacitance according to the manufacturer’s power-supply guidance.
Assign each external interface to a compatible voltage domain and verify input thresholds, output drive, and available I/O standard in DS310. Although the family supports multi-voltage I/O operation, mixed-voltage designs still require controlled transition rates and adequate return paths. Keep clocks and sensitive inputs away from high-current switching outputs, use a continuous ground reference, and treat the QFG32 escape routing as part of the high-speed signal path when device timing is critical.
Legacy CoolRunner-II designs can depend on discontinued software, cable drivers, and programming algorithms. Before building a replacement board, verify that the available toolchain supports the XC2C32A device, selected bitstream, operating system, and programmer hardware. Archive the exact JEDEC file, constraints, and device programming configuration with the production package so a future drop-in replacement can be validated against the same production artifact.
Información de cumplimiento
The product listing identifies the device as RoHS Compliant and Lead Free. No automotive qualification, REACH declaration, halogen-free designation, or conflict-minerals statement was identified.