AMD

XC2C32A-6QFG32C - 32-Macrocell Low-Power CPLD | AMD

料号: XC2C32A-6QFG32C ✗ 停产
SSTL2_1 and SSTL3_1 Rds(on) 32-pin QFN (QFG32), 5 mm × 5 mm Package -6 grade Speed
最小起订量: 1 |

XC2C32A-6QFG32C 概述

The AMD XC2C32A-6QFG32C is a 32-macrocell CoolRunner-II complex programmable logic device providing 750 system gates, 21 user I/O pins, and in-system programmability in a 32-pin QFN package. It is optimized for 1.8 V systems and supports multi-voltage I/O operation, while its 0.18 µm CMOS Flash architecture targets low-power programmable logic implementations.

A CPLD, or complex programmable logic device, is a user-programmable semiconductor within the broader programmable-logic hierarchy. Unlike a mask-programmed logic device, a CPLD retains a configurable Flash architecture and can be programmed or reprogrammed to implement control, decoding, glue logic, and interface functions. The CoolRunner-II family combines nonvolatile configuration storage, macrocell-based logic, and a compact package suited to space-constrained embedded systems.

Key features include as many as 32 macrocells, two function blocks, 21 available I/O, and 56 product terms per macrocell. The device is built on an advanced 0.18 µm CMOS Flash process and is optimized for 1.8 V systems. Its pin-to-pin logic delay can reach 3.8 ns, while another source identifies a 5.5 ns propagation delay for the -6 speed grade. A 32-pin QFN package with a 0.50 mm pitch keeps the component compact while supporting a 200 MHz-class implementation target.

The XC2C32A combines a deterministic macrocell architecture with hot-pluggable PLA characteristics, broad product-term routing, and strong pinout retention. These characteristics make it useful when the design must tolerate configuration changes, preserve board-level assignments, or implement several related Boolean functions without using a larger FPGA. Its Flash-based configuration also allows the device to retain its programmed logic when power is removed.

Typical applications include portable instrumentation, industrial control interfaces, peripheral bus decoding, display and keypad control, embedded system glue logic, and compact consumer electronics. The 21-I/O configuration is especially useful for designs that need moderate logic density, multiple independently routed signals, and low standby power rather than the extensive resources of an FPGA.

When laying out a board, use the manufacturer's QFG32 pin-assignment table and preserve the exposed thermal-pad and ground requirements shown in the package drawing. Validate every I/O voltage against the selected bank and external-interface requirements. Programming tools, constraints, and any legacy software must also be checked against the CoolRunner-II support matrix before release.

This page combines device specifications, lifecycle context, same-footprint alternatives, practical implementation guidance, and direct technical comparisons. It is intended to help engineers identify the correct CoolRunner-II option, plan a drop-in replacement, and avoid compatibility errors involving speed grade, package, or temperature range.

直接替换替代料: XC2C32A-6QFG32C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC2C32A-6QFG32C (相同外形与封装尺寸) ——差异在于 Speed Grade, Device Type, Package, Process Technology.

AMD
Speed Grade: -4
Device Type: CoolRunner-II complex programmable logic device
Package: 32-pin QFN, 6 x 6 mm, 0.50 mm pitch
对比 XC2C32A-6QFG32C →
AMD
Speed Grade: -6
Process Technology: 0.18 µm CMOS
对比 XC2C32A-6QFG32C →

XC2C32A-4QFG32C

✅ 直接替换
AMD
📦 32-pin QFN (QFG32)
CoolRunner-II complex programmable logic device · 32 macrocells · 750 gates · 1.8 V · -4 · 323 MHz · 450 MHz · 3.0 ns

联系询价

查看数据手册 →

XC2C32A-6QFG32I

✅ 直接替换 ⚠️ 规格未核验
AMD
📦 32-pin QFN (QFG32)
In-System Programmable · 32 macrocells · 21 user I/O · CoolRunner-II CPLD · 0.18 µm CMOS · 1.8 V · -6 · Industrial (-I)

联系询价

查看数据手册 →

XC2C32A-5QFG32C

✅ 直接替换 ⚠️ 规格未核验
📦 32-pin QFN (QFG32)
Speed grade decreases from -6 to -5 while the QFG32 package and 32-macrocell implementation remain the same

📋 参考替代料(不在目录中)

XC2C32A-7QFG32C

✅ 直接替换 ⚠️ 规格未核验
📦 32-pin QFN (QFG32)
Speed grade increases from -6 to -7 while retaining the same 32-macrocell QFG32 footprint

📋 参考替代料(不在目录中)

XC2C32A-8QFG32C

✅ 直接替换 ⚠️ 规格未核验
📦 32-pin QFN (QFG32)
Speed grade increases from -6 to -8 while retaining the same 32-macrocell QFG32 footprint

📋 参考替代料(不在目录中)

XC2C32A-6QFG32C 最大额定值与电气特性

Device Type CoolRunner-II complex programmable logic device (CPLD)
Macrocell Count 32 macrocells
System Gates 750 gates
Function Block Count 2 function blocks
User I/O Count 21 I/O
Product Terms per Macrocell 56 product terms
Process Technology 0.18 µm CMOS Flash
Optimization 1.8 V systems
I/O Standards SSTL2_1 and SSTL3_1
Pin-to-Pin Logic Delay 3.8 ns minimum
Propagation Delay 5.5 ns
Speed Grade -6 grade
Architecture Hot-pluggable PLA architecture
Programmability In-system programmable
封装 32-pin QFN (QFG32), 5 mm × 5 mm
Package Pitch 0.50 mm
Lead-Free Status Lead Free
RoHS 状态 RoHS Compliant

XC2C32A-6QFG32C 0.50 mm 引脚配置指南

XC2C32A-6QFG32C(0.50 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC2C32A-6QFG32C 的 0.50 mm 封装引脚图

暂无详细引脚数据: XC2C32A-6QFG32C.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC2C32A-6QFG32C 适用于 6 应用s: Embedded System Glue Logic, Portable Instrumentation, Industrial Peripheral Interface, Display and Keypad Control, Consumer Power Sequencing, Secure Authentication and Control.

🧩

Embedded System Glue Logic

The XC2C32A-6QFG32C fits compact embedded systems that need several control, decode, and state-machine functions without allocating a larger programmable-logic device. Its 32 macrocells, two function blocks, and 21 user I/O provide sufficient resources for peripheral selection, latch logic, interrupt qualification, and address decoding. The 5 mm × 5 mm QFG32 package also preserves board area when the design is already constrained by a fine-pitch assembly. Timing should be checked against the 5.5 ns propagation-delay listing and the relevant -6 timing tables before logic is committed. Because configuration is retained in Flash, the implemented functions remain available after power is removed, which is useful during boot-up, power sequencing, and fault-recovery workflows.

📱

Portable Instrumentation

The XC2C32A-6QFG32C is appropriate for portable measurement instruments that combine low-power operation with a compact programmable-logic section. Its 32 macrocells can implement trigger logic, measurement sequencing, signal routing, status decoding, and interface control while the -6 grade supports faster timing paths than the -4 grade. The QFG32 footprint measures only 5 mm × 5 mm, helping preserve space for sensors, display circuitry, and power management. Designers should still account for I/O voltage, input thresholds, output drive, and power-gating behavior under the actual battery operating profile. The device is most useful when the required logic is deterministic and small, not when the instrument needs deep memory, soft processors, or high-speed serial transceivers.

🏭

Industrial Peripheral Interface

The XC2C32A-6QFG32C can implement deterministic interface logic in industrial peripheral modules that require nonvolatile configuration and modest I/O count. Its 21 user I/O can support device selection, bus transceivers, direction control, interrupt handling, and status multiplexing, while the 32 macrocells provide more Boolean capacity than a simple single-function gate. The -6 grade is preferable where propagation delay must be constrained, and the Flash-based CoolRunner-II architecture allows board-level logic to be changed without replacing the device. For industrial deployment, confirm whether the commercial C suffix covers the actual ambient range; otherwise use the industrial ordering option. Also validate isolation, surge requirements, and grounding outside the CPLD rather than relying on the programmable logic for protection.

📺

Display and Keypad Control

The XC2C32A-6QFG32C is well suited to display scanning, keypad decoding, indicator control, and touch-interface glue logic. A 32-macrocell implementation can maintain display timing, multiplex indicators, debounce keypad inputs, and coordinate interrupt signals without occupying a high-performance microcontroller’s pins. The 21-I/O capacity allows several display and control signals to share the compact 5 mm × 5 mm QFG32 package, although the exact mixed-voltage assignments must follow the device’s bank rules. Timing validation should cover display strobe pulse width and setup requirements at the selected I/O voltage. For very large matrices or high-refresh-rate graphics, move the timing generator to dedicated display circuitry and retain the CPLD for supervisory control and bus adaptation.

⚡

Consumer Power Sequencing

The XC2C32A-6QFG32C can implement power-up sequencing, reset coordination, rail-enable logic, and fault reporting in a compact consumer or industrial controller. Its Flash configuration provides deterministic behavior after power restoration, while 21 I/O are sufficient for monitoring multiple reset and power-good signals. The CPLD can combine asynchronous input qualification with sequential control, reducing the pin burden on a host processor. Designers should establish every external I/O voltage before layout because the device supports multi-voltage operation but does not remove the need for level translation. Validate timing against the -6 grade and make reset behavior fail-safe, with a defined external supervisor capable of holding the system in a safe state if the programmed sequence is interrupted.

🖥️

Secure Authentication and Control

The XC2C32A-6QFG32C can add nonvolatile control logic for authentication, accessory detection, key capture, or programmable security sequences in compact embedded products. Thirty-two macrocells are adequate for multiple state machines and Boolean checks, and the Flash-based configuration preserves selected logic through power cycles. The CPLD may interface an external cryptographic component, validate device presence, and mediate commands to the host microcontroller. For security-critical designs, review the configured logic for unintended states, ensure sensitive test points and debug access are controlled, and consider adding a hardware tamper mechanism. Timing should be checked for all paths between external devices and the -6 grade limits, especially where authentication decisions gate power or communications.

What is the AMD XC2C32A-6QFG32C?
The AMD XC2C32A-6QFG32C is a 32-macrocell CoolRunner-II CPLD with 750 system gates and 21 user I/O in a 32-pin QFN package. According to the AMD DS310 data sheet, it uses a 0.18 µm CMOS Flash architecture, supports in-system programming, and is optimized for 1.8 V systems. It is intended for compact control, decoding, interface, and glue-logic implementations where low power, nonvolatile configuration, and a small footprint are more important than FPGA-level capacity.
What are the key specifications of XC2C32A-6QFG32C?
The XC2C32A-6QFG32C combines 32 macrocells, two function blocks, 21 user I/O, and 750 system gates in a 5 mm × 5 mm QFG32 package. The AMD DS310 data sheet identifies a 0.18 µm CMOS Flash process, 1.8 V optimization, and pin-to-pin logic delays as fast as 3.8 ns. Another technical listing identifies 5.5 ns propagation delay for the -6 grade, so the timing value used for a design should be checked against the specific datasheet table.
Where can I download the XC2C32A-6QFG32C datasheet PDF?
The official XC2C32A CoolRunner-II CPLD Data Sheet is available from AMD at https://docs.amd.com/v/u/en-US/ds310, identified as document DS310, revision 2.1, released on 2008-11-05. The document contains device architecture, package information, timing, electrical characteristics, and programming guidance. Use the DS310 pin-description and package-drawing sections when assigning PCB nets and checking exposed-pad connections.
Where can I find the XC2C32A-6QFG32C pinout?
The XC2C32A-6QFG32C pinout is defined in the AMD DS310 CoolRunner-II data sheet, particularly the QFG32 package drawing and pin-description table. The device uses a 32-pin QFN footprint measuring 5 mm × 5 mm with a 0.50 mm pitch. Because QFN pins are closely spaced and include package-specific thermal or ground provisions, assign every net from the numbered package drawing rather than from a generic QFN-32 diagram.
Is XC2C32A-6QFG32C suitable for low-power embedded systems?
Yes, the XC2C32A-6QFG32C is suitable for low-power embedded glue logic because CoolRunner-II devices are built on a 0.18 µm CMOS Flash process and include low-power operating characteristics. Its 32 macrocells and 21 I/O provide enough capacity for control, decoding, and interface functions without adopting a larger FPGA. Final power consumption depends on the configured logic, I/O state, operating frequency, and voltage, so calculate the worst case from the DS310 operating modes and the actual design.
What can replace XC2C32A-6QFG32C?
The XC2C32A-4QFG32C is a same-family drop-in candidate for XC2C32A-6QFG32C because it retains the 32-macrocell CoolRunner-II device, QFG32 footprint, and -6-versus--4 speed-grade change only. A drop-in replacement still requires validation of timing closure, temperature grade, programming files, and I/O behavior. Confirm the complete ordering code rather than assuming that a package with 32 leads is automatically interchangeable.
Is XC2C32A-6QFG32C the same as XC2C32A-6QFG32I?
The XC2C32A-6QFG32C and XC2C32A-6QFG32I share the XC2C32A CoolRunner-II device and QFG32 package, but the final ordering suffix normally identifies different commercial or industrial temperature options. They should not be treated as equivalent without checking the absolute maximum ratings, recommended operating conditions, and qualification requirements for the assembled product. The -6 speed grade remains the primary timing designation in both ordering codes.
When should I choose XC2C32A-6QFG32C over a larger CPLD?
Choose XC2C32A-6QFG32C when a design fits within 32 macrocells, 21 I/O, and 750 system gates but benefits from a compact 5 mm × 5 mm QFN package. It is well suited to deterministic glue logic, control decoding, and low-power embedded functions. Move to a larger CPLD when logic requires more macrocells, I/O, memory, or routing capacity; moving to a different package may also be necessary when the current QFG32 pin count is insufficient.
Is XC2C32A-6QFG32C suitable for industrial control applications?
The XC2C32A-6QFG32C is electrically suitable for many embedded control functions, but temperature grade determines whether it is appropriate for a particular industrial environment. The ordering suffix C identifies the commercial-grade ordering option, while an industrial-grade alternative should be selected when the enclosure temperature exceeds commercial limits. Confirm operating and storage temperatures in AMD DS310 before assigning the part to industrial equipment.
What is the difference between XC2C32A-6QFG32C and XC2C32A-6VQG44C?
The XC2C32A-6QFG32C uses a 32-pin QFN package, while the XC2C32A-6VQG44C uses a 44-pin VQFP package with additional I/O. Both retain the XC2C32A family and -6 speed designation, but the 44-pin alternative is not a drop-in replacement because its footprint and pin count differ. Choose the QFG32C for a board designed around the compact QFN footprint; choose the VQG44C only when the PCB has been designed for that package and needs more I/O.
What is the best AMD equivalent for XC2C32A-6QFG32C?
The closest same-footprint AMD candidate identified for XC2C32A-6QFG32C is XC2C32A-4QFG32C, which preserves the QFG32 package and CoolRunner-II architecture but reduces the speed grade from -6 to -4. It is appropriate only where the slower timing still meets the design’s external setup and hold requirements. For a cross-brand replacement, verify pin-level standards, configuration protocol, timing, and programming-tool support rather than relying only on macrocell count.
Can XC2C32A-4QFG32C replace XC2C32A-6QFG32C without a PCB change?
Yes, XC2C32A-4QFG32C is a mechanically compatible same-package replacement candidate for XC2C32A-6QFG32C, provided its -4 speed grade meets timing requirements. The footprint matches, but the device is slower, so paths near the original -6 timing limit can fail. Re-run static timing analysis, verify I/O and temperature constraints, and confirm that the legacy programming configuration remains compatible before approving the substitution.
Where can I buy XC2C32A-6QFG32C online?
Use the Request a Quote form on this XAIPART page to request availability, current price, minimum order quantity, and lead time for the XC2C32A-6QFG32C. Because the CoolRunner-II generation is discontinued, supply may involve legacy inventory, and production continuity should be confirmed for the required quantity. Provide the exact ordering code, target quantity, date code requirements, and inspection needs in the request.
What is the price of XC2C32A-6QFG32C?
Current commercial pricing for the XC2C32A-6QFG32C should be requested through the Request a Quote form on this page. The part is a discontinued CoolRunner-II device, so quantity, date code, condition, traceability, and production-run requirements can materially affect its commercial terms. Submit the exact MPN and required shipment quantity so the quotation can reflect the correct packaging and availability.
What is the lead time and stock status for XC2C32A-6QFG32C?
Request the current stock position and production lead time through the Request a Quote form on this XAIPART page. The XC2C32A family is discontinued, so lead time depends on available legacy inventory, acceptable date codes, and shipment volume. Include the required delivery date and inspection requirements in the request. Do not base a program schedule on generic distributor inventory messages without confirming the exact ordering code.

工程参考数据: XC2C32A-6QFG32C ——对比、设计指导和合规信息。

选型指南

Choose XC2C32A-6QFG32C when a legacy design requires the XC2C32A architecture, 32 macrocells, 21 I/O, and the compact QFG32 footprint with the -6 speed grade. It is particularly appropriate for deterministic glue logic, embedded control, peripheral decoding, and power-sequencing functions that fit below the device’s resource limits. Select XC2C32A-4QFG32C only when the slower -4 grade still closes timing; choose XC2C32A-6QFG32I when the industrial temperature option is required. Faster same-package speed grades can provide additional margin, but they do not solve obsolescence or software-support risk by themselves. XC2C32A-6VQG44C is not a drop-in option because it uses a different package and requires PCB changes. For any substitution, verify speed, temperature, I/O standards, programming compatibility, lifecycle status, and the complete ordering code.

与替代料对比

参数 本产品 XC2C32A-4QFG32C XC2C32A-6QFG32I XC2C32A-5QFG32C XC2C32A-7QFG32C XC2C32A-8QFG32C
Brand AMD AMD AMD AMD AMD AMD
Package 32-pin QFN (QFG32) 32-pin QFN (QFG32) 32-pin QFN (QFG32) 32-pin QFN (QFG32) 32-pin QFN (QFG32) 32-pin QFN (QFG32)
Device Family CoolRunner-II CoolRunner-II CoolRunner-II CoolRunner-II CoolRunner-II CoolRunner-II
Macrocell Count 32 macrocells 32 macrocells 32 macrocells 32 macrocells 32 macrocells 32 macrocells
System Gates 750 gates 750 gates 750 gates 750 gates 750 gates 750 gates
User I/O 21 I/O 21 I/O 21 I/O 21 I/O 21 I/O 21 I/O
Speed Grade -6 -4 -6 -5 -7 -8
Temperature Ordering Option C commercial suffix C commercial suffix I industrial suffix C commercial suffix C commercial suffix C commercial suffix
Programmability In-system programmable In-system programmable In-system programmable In-system programmable In-system programmable In-system programmable
Process Technology 0.18 µm CMOS Flash 0.18 µm CMOS Flash 0.18 µm CMOS Flash 0.18 µm CMOS Flash 0.18 µm CMOS Flash 0.18 µm CMOS Flash

关键差异点

  • Faster timing grade within the same QFG32 footprint (对比 XC2C32A-4QFG32C)
  • Commercial temperature ordering option (对比 XC2C32A-6QFG32I)
  • Same-package logic density and interface count (对比 XC2C32A-6VQG44C)

设计说明

Route all QFG32 connections according to the numbered package drawing in AMD DS310 rather than a generic QFN layout. The package is 5 mm × 5 mm with a 0.50 mm pitch, leaving little assembly tolerance for fanout errors. Preserve the package thermal-pad and ground arrangement shown by the manufacturer, and inspect exposed-pad soldering after assembly. Confirm pin numbering in both the PCB CAD library and the device schematic before releasing artwork.

A same-footprint alternative is not automatically a functionally approved substitute. The -4 and -5 speed grades are slower than -6 and can break paths that have little timing margin, while an industrial suffix changes the environmental qualification rather than the footprint. Rerun static timing analysis at the intended I/O voltage and temperature, confirm configuration compatibility, and verify every external pin assignment. Never substitute the -6VQG44C without changing the PCB footprint.

Calculate the CPLD’s worst-case supply demand from the configured logic, I/O activity, speed grade, and selected power mode rather than relying on a generic device current. Account for rail sequencing so output pins do not receive external signals while the core supply is below its operating range. Use the AMD DS310 recommended operating conditions and absolute maximum ratings, and provide local bulk and bypass capacitance according to the manufacturer’s power-supply guidance.

Assign each external interface to a compatible voltage domain and verify input thresholds, output drive, and available I/O standard in DS310. Although the family supports multi-voltage I/O operation, mixed-voltage designs still require controlled transition rates and adequate return paths. Keep clocks and sensitive inputs away from high-current switching outputs, use a continuous ground reference, and treat the QFG32 escape routing as part of the high-speed signal path when device timing is critical.

Legacy CoolRunner-II designs can depend on discontinued software, cable drivers, and programming algorithms. Before building a replacement board, verify that the available toolchain supports the XC2C32A device, selected bitstream, operating system, and programmer hardware. Archive the exact JEDEC file, constraints, and device programming configuration with the production package so a future drop-in replacement can be validated against the same production artifact.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The product listing identifies the device as RoHS Compliant and Lead Free. No automotive qualification, REACH declaration, halogen-free designation, or conflict-minerals statement was identified.

相关搜索

xc2c32a 6qfg32c xc2c32a 6qfg32c datasheet xc2c32a datasheet xilinx xc2c32a xc2c32a 6qfg32c pinout xc2c32a 6qfg32c replacement xc2c32a 6qfg32c equivalent xc2c32a 6qfg32c vs xc2c32a 6vqg44c xc2c32a 6qfg32c price xc2c32a 6qfg32c stock amd xc2c32a 6qfg32c xc2c32a qfg32 package pinout xc2c32a cpld application circuit xc2c32a 6qfg32i

相关元器件 & 术语

AMD Xilinx XC2C32A XC2C32A-6QFG32C XC2C32A-4QFG32C XC2C32A-6QFG32I XC2C32A-5QFG32C XC2C32A-7QFG32C XC2C32A-8QFG32C XC2C32A-6VQG44C CoolRunner-II CPLD complex programmable logic device programmable logic FPGA macrocell system gate function block Flash memory 0.18 µm CMOS QFG32 QFN package surface mount in-system programming SSTL2_1 SSTL3_1 RoHS DS310
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情