XC3S100E-4VQG100C - 2160 Logic Cell FPGA | Xilinx
N.º de pieza: XC3S100E-4VQG100C ✗ Fin de vidaXC3S100E-4VQG100C Descripción general
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. In the device hierarchy, an FPGA is a programmable logic device and therefore a more flexible relative of fixed-function logic ICs. Where an application requires parallel control, interface adaptation, protocol conversion, or signal processing, an FPGA can implement multiple digital functions in parallel while allowing field upgrades through a programmable configuration bitstream.
The XC3S100E provides 2,160 logic cells and 100,000 equivalent system gates, with 66 I/O pins for connections to external components. Its 1.2 V nominal core supply is specified by listings as a 1.14 V to 1.26 V operating range. A listed maximum clock frequency of 572 MHz applies to the associated 100-pin Spartan-3E device family. These resources are suitable for medium-density embedded control, bus-interface bridging, protocol conversion, data acquisition, and industrial automation logic.
The XC3S100E belongs to the Spartan-3E architecture, which combines configurable logic blocks, dedicated multipliers, block RAM, and general-purpose I/O in a low-cost FPGA platform. The -4 designation identifies the device speed grade, while VQG100 identifies the 100-pin very-thin quad-flat-pack configuration and C identifies commercial temperature grade. Because configuration determines the implemented logic, designers must match the bitstream, pin constraints, supported device family, and package to the exact device identifier before programming.
Typical uses include industrial control modules, custom peripheral interfaces, communications protocol bridges, motor-control support logic, test equipment, and embedded data-acquisition systems. Its 66 I/Os are useful for parallel digital interfaces, while programmable logic can implement state machines, arbitration, framing logic, and data-format conversion. The 100-pin surface-mount package also supports compact controller boards without requiring the larger ball-grid packages used by higher-capacity devices.
PCB design should preserve the manufacturer's recommended power, decoupling, configuration, clock, and I/O layout. Place the core and I/O supply decoupling capacitors close to their associated pins, route configuration signals away from fast switching nodes, and assign pins according to the package-specific constraints and bank voltage rules. Confirm the selected device and bitstream with programming tools before production release because speed and temperature suffixes are not interchangeable in every system qualification context.
This page combines device specifications, application guidance, pin-compatible alternatives, comparison parameters, and practical FPGA design notes. The recommended alternatives retain the 100-pin package while distinguishing commercial, industrial, faster-speed, and higher-capacity configurations for easier replacement planning.
Alternativas directas para XC3S100E-4VQG100C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
XC3S100E-4VQG100I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S100E-5VQG100C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S100E-5VQG100I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S100E-4VQG100CS1
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S250E-4VQG100C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S100E-4VQG100C Valores máximos y características eléctricas
| Device Type | Spartan-3E field-programmable gate array (FPGA) |
| Logic Cells | 2,160 logic cells |
| System Gates | 100,000 equivalent system gates |
| Configurable Logic Blocks | 240 CLBs |
| User I/O Count | 66 I/Os |
| Frecuencia de reloj máxima | 572 MHz |
| Nominal Core Supply Voltage | 1.2 V |
| Core Supply Operating Range | 1.14 V to 1.26 V |
| Temperatura de funcionamiento | 0°C to +85°C |
| Package Type | 100-pin VQFP (14 mm × 14 mm) |
| Package Pin Count | 100 pins |
| Tipo de montaje | Surface-mount |
| Device Family | Spartan-3E |
| Speed Grade | -4 |
| Temperature Grade | Commercial (C suffix) |
| Lead-Free Status | Lead-free |
Guía de configuración de pines de XC3S100E-4VQG100C 100 pins
Configuración de pines para XC3S100E-4VQG100C (encapsulado 100 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC3S100E-4VQG100C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC3S100E-4VQG100C es adecuado para 6 aplicacións: Industrial Control Logic, Communications Protocol Bridge, Motor Control Support, Data Acquisition and Test Equipment, Consumer Device Interface Control, Programmable Logic Learning Platform.
Industrial Control Logic
The XC3S100E-4VQG100C fits compact machine-control boards that coordinate sensors, actuators, and supervisory logic. Its 2,160 logic cells and 66 I/Os can support parallel digital interfaces, state machines, timing controls, and fault handling without requiring several fixed-function logic devices. The 1.2 V core and 100-pin surface-mount package simplify integration into controller boards, while the -4 speed grade provides useful timing margin for registered control paths. Commercial-temperature operation must remain within 0°C to +85°C; otherwise, the pin-compatible XC3S100E-4VQG100I is more appropriate.
Recomendado
Communications Protocol Bridge
The XC3S100E-4VQG100C can bridge dissimilar digital interfaces by running framing, byte alignment, buffering, and protocol-conversion logic in parallel. Its 66 user I/Os provide enough external connectivity for multiple compact serial or parallel links, while dedicated FPGA resources allow deterministic control of data flow. The 100-pin VQFP keeps the implementation practical for equipment requiring one or two communication ports rather than a large backplane. Designers should assign pins according to bank constraints, synchronize asynchronous interfaces, and verify timing margins for the selected -4 speed grade.
Recomendado
Motor Control Support
The XC3S100E-4VQG100C is suitable for the digital control layer surrounding a motor-drive system, including PWM sequencing, command decoding, fault capture, and position-sensor conditioning. Programmable logic can execute several real-time tasks concurrently, and the 66 I/Os support encoder inputs, control signals, and diagnostic outputs. Its 2,160 logic cells are suitable for a focused controller or peripheral function rather than a complete high-axis-count motor-control platform. Keep external power switching separate from the FPGA, observe grounding and decoupling guidance, and confirm timing at the system clock frequency.
Recomendado
Data Acquisition and Test Equipment
The XC3S100E-4VQG100C can implement a compact acquisition front end when parallel sensors require sampling control, timestamp generation, filtering, and data formatting. Its 66 I/Os permit direct connection to multiplexers, counters, and digital sensors, while the programmable fabric supports deterministic pipelines and parallel processing. The listed 572 MHz family-level maximum clock provides substantial timing capability, although actual design performance depends on routing, logic depth, I/O standards, and the selected -4 device. Validate all timing paths and constrain unused I/Os appropriately in the implementation project.
Recomendado
Consumer Device Interface Control
The XC3S100E-4VQG100C can add programmable display, keypad, storage, or peripheral-control functions to a compact consumer product. The 100-pin package and 66 I/Os provide a practical balance between logic capacity and board size, while firmware and hardware behavior can be updated through the configuration bitstream. A typical implementation could coordinate display timing, decode keypad input, and manage an external peripheral interface in parallel. Commercial-temperature suitability and the complete product enclosure should be reviewed before deployment, especially where heat from adjacent power circuitry raises the junction environment.
Recomendado
Programmable Logic Learning Platform
The XC3S100E-4VQG100C provides a practical platform for learning FPGA architecture, constraint-driven design, embedded logic, and interface implementation. Its 2,160 logic cells and 66 I/Os are large enough for meaningful counters, finite-state machines, simple processors, and multi-interface exercises without the complexity of a high-end FPGA. The 100-pin package also exposes real assembly and routing constraints, making it useful for teaching PCB layout, clocking, and configuration practices. Ensure that the educational board supplies the required core and I/O rails and that every bitstream targets the exact device suffix.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC3S100E-4VQG100C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC3S100E-4VQG100I | XC3S100E-5VQG100C | XC3S100E-5VQG100I | XC3S100E-4VQG100CS1 | XC3S250E-4VQG100C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | VQFP-100 | VQFP-100 - same package | VQFP-100 - same package | VQFP-100 - same package | TQFP-100 - same 100-pin package family | VQFP-100 - same package |
| Device Series | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E | Spartan-3E |
| Equivalent System Gates | 100,000 system gates | 100,000 system gates | 100,000 system gates | 100,000 system gates | 100,000 system gates | 250,000 system gates |
| Speed Grade | -4 | -4 | -5 | -5 | -4 | -4 |
Diferenciadores clave
- Commercial-temperature operation with the same core logic configuration (frente a XC3S100E-4VQG100I)
- Lower speed grade supports lower-power timing design (frente a XC3S100E-5VQG100C)
- Higher-capacity pin-compatible upgrade path (frente a XC3S250E-4VQG100C)
Notas de diseño
The XC3S100E-4VQG100C requires a 1.2 V nominal core rail, with the listed operating range of 1.14 V to 1.26 V, plus the I/O rails required by the selected pin assignments. Place bulk and high-frequency decoupling capacitors close to their associated power pins, keep the return path short, and follow the decoupling network in AMD data sheet DS312. Do not assume that the core and I/O rails can be tied together without checking voltage, sequencing, current, and bank-power constraints.
Route the 100-pin VQFP footprint to the package drawing and pin table in DS312, including exposed thermal or mechanical features if indicated. Separate clock, configuration, and sensitive I/O routing from high-current switching paths. Use a solid ground plane, minimize stubs on configuration nets, and place programming or boundary-scan access headers where their signals can be routed without compromising the main logic area. Review all I/O standards against the available supply rails before assigning pins.
A valid implementation depends on selecting the exact XC3S100E-4VQG100C device rather than relying only on the Spartan-3E family name. Device, package, speed grade, and temperature suffix affect the supported bitstream and timing assumptions. A -5 grade can generally satisfy -4 timing requirements, but the converse is not valid. Likewise, an industrial-temperature replacement changes environmental qualification rather than logic resources. Confirm the exact ordering code and rerun implementation and timing analysis before substituting any part.
Información de cumplimiento
The component listing identifies the device as lead-free. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified and remain unconfirmed for this exact MPN.