Xilinx

XC3S100E-4VQG100C - 2160 Logic Cell FPGA | Xilinx

MPN: XC3S100E-4VQG100C ✗ اختتامِ زندگی
1.2 V Vdss 100-pin VQFP (14 mm × 14 mm) Package 572 MHz Speed
MOQ: 1 |

XC3S100E-4VQG100C جائزہ

The Xilinx XC3S100E-4VQG100C is a Spartan-3E field-programmable gate array with 2,160 logic cells, 100,000 system gates, 66 user I/Os, and a 1.2 V core supply in a 100-pin VQFP package. The -4 speed grade supports demanding control and signal-processing designs, while the commercial C suffix identifies an operating-temperature range of 0°C to +85°C. It combines programmable logic, dedicated digital signal processing resources, and block memory in one reconfigurable semiconductor device.

A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. In the device hierarchy, an FPGA is a programmable logic device and therefore a more flexible relative of fixed-function logic ICs. Where an application requires parallel control, interface adaptation, protocol conversion, or signal processing, an FPGA can implement multiple digital functions in parallel while allowing field upgrades through a programmable configuration bitstream.

The XC3S100E provides 2,160 logic cells and 100,000 equivalent system gates, with 66 I/O pins for connections to external components. Its 1.2 V nominal core supply is specified by listings as a 1.14 V to 1.26 V operating range. A listed maximum clock frequency of 572 MHz applies to the associated 100-pin Spartan-3E device family. These resources are suitable for medium-density embedded control, bus-interface bridging, protocol conversion, data acquisition, and industrial automation logic.

The XC3S100E belongs to the Spartan-3E architecture, which combines configurable logic blocks, dedicated multipliers, block RAM, and general-purpose I/O in a low-cost FPGA platform. The -4 designation identifies the device speed grade, while VQG100 identifies the 100-pin very-thin quad-flat-pack configuration and C identifies commercial temperature grade. Because configuration determines the implemented logic, designers must match the bitstream, pin constraints, supported device family, and package to the exact device identifier before programming.

Typical uses include industrial control modules, custom peripheral interfaces, communications protocol bridges, motor-control support logic, test equipment, and embedded data-acquisition systems. Its 66 I/Os are useful for parallel digital interfaces, while programmable logic can implement state machines, arbitration, framing logic, and data-format conversion. The 100-pin surface-mount package also supports compact controller boards without requiring the larger ball-grid packages used by higher-capacity devices.

PCB design should preserve the manufacturer's recommended power, decoupling, configuration, clock, and I/O layout. Place the core and I/O supply decoupling capacitors close to their associated pins, route configuration signals away from fast switching nodes, and assign pins according to the package-specific constraints and bank voltage rules. Confirm the selected device and bitstream with programming tools before production release because speed and temperature suffixes are not interchangeable in every system qualification context.

This page combines device specifications, application guidance, pin-compatible alternatives, comparison parameters, and practical FPGA design notes. The recommended alternatives retain the 100-pin package while distinguishing commercial, industrial, faster-speed, and higher-capacity configurations for easier replacement planning.

کے لیے ڈراپ اِن متبادل XC3S100E-4VQG100C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

XC3S100E-4VQG100I

✅ ڈراپ-اِن
📦 VQFP-100
Operating temperature changes from 0°C to +85°C to -40°C to +100°C; logic cells, I/O count, speed grade, and package remain unchanged.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

XC3S100E-5VQG100C

✅ ڈراپ-اِن
📦 VQFP-100
Speed grade changes from -4 to -5; device capacity and commercial-temperature classification remain in the same 100-pin Spartan-3E configuration.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

XC3S100E-5VQG100I

✅ ڈراپ-اِن
📦 VQFP-100
Speed grade changes from -4 to -5 and temperature grade extends to -40°C to +100°C; package and logic resources remain compatible.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

XC3S100E-4VQG100CS1

✅ ڈراپ-اِن
📦 VQFP-100
Adds the S1 ordering suffix while retaining 2,160 logic cells, 66 I/Os, a 100-pin TQFP package, and the -4 speed grade.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

XC3S250E-4VQG100C

✅ ڈراپ-اِن
📦 VQFP-100
Logic capacity increases from 100,000 to 250,000 equivalent system gates, while the commercial -4 100-pin device configuration is retained.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

XC3S100E-4VQG100C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type Spartan-3E field-programmable gate array (FPGA)
Logic Cells 2,160 logic cells
System Gates 100,000 equivalent system gates
Configurable Logic Blocks 240 CLBs
User I/O Count 66 I/Os
زیادہ سے زیادہ کلاک فریکوئنسی 572 MHz
Nominal Core Supply Voltage 1.2 V
Core Supply Operating Range 1.14 V to 1.26 V
آپریٹنگ درجہ حرارت 0°C to +85°C
Package Type 100-pin VQFP (14 mm × 14 mm)
Package Pin Count 100 pins
ماؤنٹنگ ٹائپ Surface-mount
Device Family Spartan-3E
Speed Grade -4
Temperature Grade Commercial (C suffix)
Lead-Free Status Lead-free

XC3S100E-4VQG100C 100 pins پن کنفیگریشن گائیڈ

XC3S100E-4VQG100C (100 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

XC3S100E-4VQG100C کے لیے 100 pins پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC3S100E-4VQG100C.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

XC3S100E-4VQG100C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Logic, Communications Protocol Bridge, Motor Control Support, Data Acquisition and Test Equipment, Consumer Device Interface Control, Programmable Logic Learning Platform.

🏭

Industrial Control Logic

The XC3S100E-4VQG100C fits compact machine-control boards that coordinate sensors, actuators, and supervisory logic. Its 2,160 logic cells and 66 I/Os can support parallel digital interfaces, state machines, timing controls, and fault handling without requiring several fixed-function logic devices. The 1.2 V core and 100-pin surface-mount package simplify integration into controller boards, while the -4 speed grade provides useful timing margin for registered control paths. Commercial-temperature operation must remain within 0°C to +85°C; otherwise, the pin-compatible XC3S100E-4VQG100I is more appropriate.

🌐

Communications Protocol Bridge

The XC3S100E-4VQG100C can bridge dissimilar digital interfaces by running framing, byte alignment, buffering, and protocol-conversion logic in parallel. Its 66 user I/Os provide enough external connectivity for multiple compact serial or parallel links, while dedicated FPGA resources allow deterministic control of data flow. The 100-pin VQFP keeps the implementation practical for equipment requiring one or two communication ports rather than a large backplane. Designers should assign pins according to bank constraints, synchronize asynchronous interfaces, and verify timing margins for the selected -4 speed grade.

🔧

Motor Control Support

The XC3S100E-4VQG100C is suitable for the digital control layer surrounding a motor-drive system, including PWM sequencing, command decoding, fault capture, and position-sensor conditioning. Programmable logic can execute several real-time tasks concurrently, and the 66 I/Os support encoder inputs, control signals, and diagnostic outputs. Its 2,160 logic cells are suitable for a focused controller or peripheral function rather than a complete high-axis-count motor-control platform. Keep external power switching separate from the FPGA, observe grounding and decoupling guidance, and confirm timing at the system clock frequency.

🖥️

Data Acquisition and Test Equipment

The XC3S100E-4VQG100C can implement a compact acquisition front end when parallel sensors require sampling control, timestamp generation, filtering, and data formatting. Its 66 I/Os permit direct connection to multiplexers, counters, and digital sensors, while the programmable fabric supports deterministic pipelines and parallel processing. The listed 572 MHz family-level maximum clock provides substantial timing capability, although actual design performance depends on routing, logic depth, I/O standards, and the selected -4 device. Validate all timing paths and constrain unused I/Os appropriately in the implementation project.

📱

Consumer Device Interface Control

The XC3S100E-4VQG100C can add programmable display, keypad, storage, or peripheral-control functions to a compact consumer product. The 100-pin package and 66 I/Os provide a practical balance between logic capacity and board size, while firmware and hardware behavior can be updated through the configuration bitstream. A typical implementation could coordinate display timing, decode keypad input, and manage an external peripheral interface in parallel. Commercial-temperature suitability and the complete product enclosure should be reviewed before deployment, especially where heat from adjacent power circuitry raises the junction environment.

🧩

Programmable Logic Learning Platform

The XC3S100E-4VQG100C provides a practical platform for learning FPGA architecture, constraint-driven design, embedded logic, and interface implementation. Its 2,160 logic cells and 66 I/Os are large enough for meaningful counters, finite-state machines, simple processors, and multi-interface exercises without the complexity of a high-end FPGA. The 100-pin package also exposes real assembly and routing constraints, making it useful for teaching PCB layout, clocking, and configuration practices. Ensure that the educational board supplies the required core and I/O rails and that every bitstream targets the exact device suffix.

تجویز کردہ پروڈکٹس کا خلاصہ

XC3S100E-4VQG100I Pin-compatible industrial-temperature grade استعمال ہوتا ہے: Industrial Control Logic, Motor Control Support, Data Acquisition and Test Equipment, Programmable Logic Learning Platform XC3S100E-5VQG100C Pin-compatible higher speed grade استعمال ہوتا ہے: Industrial Control Logic, Consumer Device Interface Control XC3S100E-4VQG100CS1 Same-family 100-pin replacement option استعمال ہوتا ہے: Communications Protocol Bridge, Consumer Device Interface Control XC3S250E-4VQG100C Higher-capacity option for expanded protocol logic استعمال ہوتا ہے: Communications Protocol Bridge, Data Acquisition and Test Equipment, Programmable Logic Learning Platform XC3S100E-5VQG100I Faster, extended-temperature package option استعمال ہوتا ہے: Motor Control Support
What are the key specifications of XC3S100E-4VQG100C that engineers should know?
The XC3S100E-4VQG100C is a 100-pin Spartan-3E FPGA with 2,160 logic cells, 100,000 equivalent system gates, 66 user I/Os, and a 1.2 V core supply. It uses the -4 speed grade and commercial-temperature suffix, with an operating range of 0°C to +85°C. According to the AMD Spartan-3E Family Data Sheet DS312, the device integrates configurable logic, dedicated DSP resources, block memory, and programmable I/O for compact control and interface designs.
Where can I download the XC3S100E-4VQG100C datasheet PDF?
The AMD Spartan-3E Family Data Sheet DS312 is the appropriate starting document for XC3S100E-4VQG100C design work. It covers the family architecture, device tables, electrical characteristics, package information, and operating guidance. Open the AMD documentation link on this page and select the DS312 PDF for the official document. The separate Xilinx datasheet and Octopart links also provide access to component-specific documentation and technical references.
What is the XC3S100E-4VQG100C pinout and package footprint?
The XC3S100E-4VQG100C uses a 100-pin VQFP package measuring 14 mm × 14 mm, with 66 configurable user I/Os among the package pins. Use the package drawing, pin table, and pin constraints in AMD data sheet DS312 when assigning PCB tracks. The other pins include power, ground, configuration, clock, and dedicated functions; their exact numbering must be transcribed from the package pin table before layout release.
What can replace the XC3S100E-4VQG100C on the same PCB?
The closest same-footprint replacement is XC3S100E-4VQG100I because it retains the 100-pin VQFP package, 2,160 logic cells, 66 I/Os, and -4 speed grade while extending the temperature range to -40°C to +100°C. A -5 speed-grade variant can also fit electrically when its timing and system requirements permit. Before replacement, verify configuration bitstream compatibility, power rails, pin constraints, and speed-grade timing in DS312.
Is XC3S100E-4VQG100C the same as XC3S100E-4VQG100I?
No. XC3S100E-4VQG100C and XC3S100E-4VQG100I share the Spartan-3E architecture, 2,160 logic cells, 66 I/Os, -4 speed grade, and 100-pin VQFP package, but their temperature grades differ. The C version is specified from 0°C to +85°C, while the I version extends from -40°C to +100°C. The I-grade device is therefore the drop-in choice when the enclosure can exceed the commercial-temperature limit.
When should I choose XC3S100E-4VQG100C over XC3S100E-4VQG100I?
Choose XC3S100E-4VQG100C when the assembly is guaranteed to remain between 0°C and +85°C and a commercial-temperature grade is sufficient. Select XC3S100E-4VQG100I when ambient or enclosure temperatures may fall below 0°C or rise above +85°C, because that alternative is specified to -40°C to +100°C. Both use the same 100-pin footprint and -4 performance class, allowing the thermal requirement to determine the final choice.
Is XC3S100E-4VQG100C suitable for industrial control and automation equipment?
Yes, XC3S100E-4VQG100C is suitable for industrial applications whose specified ambient temperature remains within 0°C to +85°C. Its 2,160 logic cells and 66 I/Os can implement control state machines, bus interfaces, signal conditioning, and protocol conversion. For installations exposed to temperatures below 0°C or above +85°C, choose XC3S100E-4VQG100I after checking the complete system thermal and qualification requirements.
XC3S100E-4VQG100C vs XC3S250E-4VQG100C: which is better for a logic-heavy design?
XC3S250E-4VQG100C is the better choice when logic capacity is the limiting requirement because it provides 250,000 equivalent system gates versus 100,000 for XC3S100E-4VQG100C. The target device has 2,160 logic cells and 66 I/Os, while the larger Spartan-3E member offers substantially greater design capacity. Both are identified as 100-pin devices in the cross-reference information, but pin allocation, configuration, timing, and I/O utilization must be reviewed before treating the upgrade as drop-in.
Where can I buy XC3S100E-4VQG100C and check current availability?
Use the Request a Quote form on this page to request XC3S100E-4VQG100C availability, current lead time, and an order quotation. The request should identify the exact 100-pin commercial-temperature suffix and the required quantity. Because legacy FPGA inventory and lead times can vary by lot, confirm manufacturing traceability and date-code requirements before placing a production order.
What is the price of XC3S100E-4VQG100C?
The current XC3S100E-4VQG100C quotation is generated through the Request a Quote form on this page. Include the exact MPN, quantity, packaging preference, and whether date-code traceability is required. This avoids relying on a stale catalog figure and lets the quotation reflect current legacy-Spartan inventory, supply status, and required order quantity.
What is the lead time for XC3S100E-4VQG100C?
Current lead time for XC3S100E-4VQG100C should be confirmed through the Request a Quote form on this page. State the required quantity and acceptable delivery date so the order can be matched to available 100-pin commercial-grade inventory. For obsolete or mature FPGA families, schedule flexibility is important, and designers should also consider a qualified alternate plan before releasing time-critical production orders.
Is XC3S100E-4VQG100C in stock?
Stock status for XC3S100E-4VQG100C can change quickly because the Spartan-3E family is a mature product line. Submit the exact MPN and required quantity through the Request a Quote form on this page for a current availability response. Include a target delivery date and any date-code or traceability requirement, especially for industrial or long-life equipment programs.
What programming tools and bitstreams are used with XC3S100E-4VQG100C?
The XC3S100E-4VQG100C uses the Xilinx Spartan-3E device configuration flow and requires a bitstream generated for the correct device family, package, speed grade, and temperature suffix. DS312 identifies the architecture and device resources, while the applicable Xilinx design, implementation, and programming documentation define the tool flow. Validate the target device string and pin constraints during implementation, and use the correct boundary-scan or programming configuration for the assembled board.
What power and decoupling requirements apply to XC3S100E-4VQG100C?
The XC3S100E-4VQG100C operates from a 1.2 V nominal core supply, with a listed operating range of 1.14 V to 1.26 V, and also requires its specified I/O supply rails. Place the recommended bulk and high-frequency decoupling capacitors close to the corresponding power pins, and provide clean grounding for the 66 I/O paths. Follow the power-sequencing and current-limit guidance in DS312 rather than inferring requirements from another Spartan device.
Is XC3S100E-4VQG100C RoHS compliant and suitable for lead-free assembly?
The XC3S100E-4VQG100C listing identifies the device as lead-free, but its formal RoHS and REACH declarations should be confirmed for the exact orderable MPN. Use AMD or Xilinx compliance documentation and request a current declaration through the Request a Quote form if the declaration is required by the procurement process. For production qualification, also confirm moisture-protection requirements, reflow profile, package condition, and applicable quality documentation.

کے لیے انجینئرنگ ریفرنس ڈیٹا XC3S100E-4VQG100C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose XC3S100E-4VQG100C for a compact Spartan-3E design that needs 2,160 logic cells, 66 I/Os, and a -4 speed grade while remaining within 0°C to +85°C. Select XC3S100E-4VQG100I when the same electrical and logic configuration is needed across -40°C to +100°C; it retains the 100-pin footprint and offers the closest functional replacement. Choose XC3S100E-5VQG100C or XC3S100E-5VQG100I when additional timing performance is useful, subject to timing analysis and device-temperature requirements. XC3S100E-4VQG100CS1 offers another same-package ordering route whose lifecycle and qualification should be reviewed. Use XC3S250E-4VQG100C when the design outgrows the 100,000-system-gate density, but verify pin allocation, bitstream targeting, timing, and resource migration rather than assuming software transparency.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ XC3S100E-4VQG100I XC3S100E-5VQG100C XC3S100E-5VQG100I XC3S100E-4VQG100CS1 XC3S250E-4VQG100C
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Package VQFP-100 VQFP-100 - same package VQFP-100 - same package VQFP-100 - same package TQFP-100 - same 100-pin package family VQFP-100 - same package
Device Series Spartan-3E Spartan-3E Spartan-3E Spartan-3E Spartan-3E Spartan-3E
Equivalent System Gates 100,000 system gates 100,000 system gates 100,000 system gates 100,000 system gates 100,000 system gates 250,000 system gates
Speed Grade -4 -4 -5 -5 -4 -4

اہم امتیازی خصوصیات

  • Commercial-temperature operation with the same core logic configuration (بمقابلہXC3S100E-4VQG100I)
  • Lower speed grade supports lower-power timing design (بمقابلہXC3S100E-5VQG100C)
  • Higher-capacity pin-compatible upgrade path (بمقابلہXC3S250E-4VQG100C)

ڈیزائن نوٹس

The XC3S100E-4VQG100C requires a 1.2 V nominal core rail, with the listed operating range of 1.14 V to 1.26 V, plus the I/O rails required by the selected pin assignments. Place bulk and high-frequency decoupling capacitors close to their associated power pins, keep the return path short, and follow the decoupling network in AMD data sheet DS312. Do not assume that the core and I/O rails can be tied together without checking voltage, sequencing, current, and bank-power constraints.

Route the 100-pin VQFP footprint to the package drawing and pin table in DS312, including exposed thermal or mechanical features if indicated. Separate clock, configuration, and sensitive I/O routing from high-current switching paths. Use a solid ground plane, minimize stubs on configuration nets, and place programming or boundary-scan access headers where their signals can be routed without compromising the main logic area. Review all I/O standards against the available supply rails before assigning pins.

A valid implementation depends on selecting the exact XC3S100E-4VQG100C device rather than relying only on the Spartan-3E family name. Device, package, speed grade, and temperature suffix affect the supported bitstream and timing assumptions. A -5 grade can generally satisfy -4 timing requirements, but the converse is not valid. Likewise, an industrial-temperature replacement changes environmental qualification rather than logic resources. Confirm the exact ordering code and rerun implementation and timing analysis before substituting any part.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Yes
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The component listing identifies the device as lead-free. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified and remain unconfirmed for this exact MPN.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

xc3s100e 4vqg100c xc3s100e datasheet xc3s100e 4cpg132c XC3S100E-4VQG100C datasheet XC3S100E-4VQG100C datasheet pdf XC3S100E-4VQG100C pinout XC3S100E-4VQG100C equivalent XC3S100E-4VQG100C replacement XC3S100E-4VQG100C vs XC3S250E-4VQG100C XC3S100E-4VQG100C price XC3S100E-4VQG100C stock Xilinx XC3S100E-4VQG100C

متعلقہ اجزاء اور اصطلاحات

Xilinx AMD XC3S100E-4VQG100C XC3S100E-4VQG100I XC3S100E-5VQG100C XC3S100E-5VQG100I XC3S100E-4VQG100CS1 XC3S250E-4VQG100C XC3S100E Spartan-3E FPGA field-programmable gate array programmable logic device logic cell configurable logic block block RAM digital signal processing VQFP-100 TQFP surface-mount package RoHS REACH bitstream I/O bank 1.2 V core supply
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں