XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD
N.º de pieza: XC3S1500-4FG320C ✗ Fin de vidaXC3S1500-4FG320C Descripción general
A field-programmable gate array is a semiconductor IC whose digital behavior is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated I/O, and clocking resources. The Spartan-3 family occupies the FPGA and CPLD segment of the broader semiconductor market and is intended for designs requiring substantial parallel processing without the cost of application-specific integrated circuit development.
The XC3S1500-4FG320C offers a 1.2 V core supply, a permitted supply range of 1.14 V to 1.26 V, and 90 nm CMOS process technology. Its 29,952 cells provide substantially more logic capacity than smaller CPLDs, while 221 I/O pins support interfaces to memory, converters, transceivers, and control peripherals. The -4 speed designation is associated with a maximum clock frequency of 630 MHz in the device listing.
Programmable logic in the Spartan-3 architecture can implement parallel datapaths, state machines, protocol bridges, and fixed-function accelerators. Dedicated memory and I/O resources allow multiple data paths to operate concurrently, while clock-management features support deterministic internal timing. Exact RAM quantities, supported I/O standards, configuration interfaces, and pin functions must be confirmed in the AMD Spartan-3 family data sheet before final board design.
Typical uses include industrial automation and machine vision, embedded communications, video and image processing, data acquisition, networking equipment, and cost-sensitive digital control. The XC3S1500-4FG320C is particularly appropriate when a design needs substantially more parallelism than a small CPLD but does not require the resources or power envelope of a larger high-end FPGA.
PCB planning must account for the dense 320-ball FBGA footprint, controlled-impedance routing, decoupling near the core and I/O supplies, and proper configuration-memory interface layout. Designers should follow the AMD package pinout and recommended-layout guidance, validate signal integrity across every implemented I/O standard, and confirm thermal performance at the highest expected junction temperature.
This product record combines the core electrical, logic-capacity, packaging, and environmental characteristics with practical selection guidance, application context, and package-aware alternatives. It also highlights the distinction between the commercial-grade -4FG320C device and related lower-power or extended-temperature family members.
Alternativas directas para XC3S1500-4FG320C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC3S1500-4FG320C (mismo factor de forma y huella) — difiere en Device Type.
XC3S1500-4FGG320C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500-4FG320I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC3S1500-4FGG320I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500L-4FG320C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500L-4FGG320C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500-4FG320C Valores máximos y características eléctricas
| Device Type | Spartan-3 field-programmable gate array |
| System Gates | 1,500,000 gates |
| Total Cells | 29,952 cells |
| Frecuencia de reloj máxima | 630 MHz |
| Process Technology | 90 nm CMOS |
| Nominal Core Supply Voltage | 1.2 V |
| Minimum Core Supply Voltage | 1.14 V |
| Maximum Core Supply Voltage | 1.26 V |
| User I/O Pins | 221 pins |
| Total Package Pins | 320 pins |
| Package Type | 320-pin flip-chip ball grid array |
| Temperatura de funcionamiento | 0 °C to 85 °C |
| Logic Cell Count | 29,952 cells |
| Device Suffix | -4FG320C |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de XC3S1500-4FG320C 320-pin flip-chip ball grid array
Configuración de pines para XC3S1500-4FG320C (encapsulado 320-pin flip-chip ball grid array). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC3S1500-4FG320C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC3S1500-4FG320C es adecuado para 6 aplicacións: Industrial Automation Controller, Machine Vision Image Processing, Data Acquisition and Signal Conditioning, Embedded Communications Gateway, Video Timing and Display Control, Network Packet Processing.
Industrial Automation Controller
The AMD XC3S1500-4FG320C is suitable for industrial automation because its 29,952 programmable cells and 630 MHz maximum clock frequency support parallel motion control, sequencing, and machine-state logic. The 221 user I/O pins provide interfaces for sensors, actuators, encoders, and discrete control signals without requiring a separate CPLD for every auxiliary function. Its 1.2 V core supply can be paired with suitable I/O supply levels through the device’s supported interfaces. Designers should define deterministic timing, isolate noisy industrial inputs, and validate the complete system across the listed 0 °C to 85 °C range.
Recomendado
Machine Vision Image Processing
The XC3S1500-4FG320C can accelerate machine-vision preprocessing by running parallel pixel classification, thresholding, line detection, and frame-format conversion in programmable logic. Its 29,952 cells provide more parallel capacity than a conventional PAL while the 221 user I/O pins can connect camera, memory, and data-conversion interfaces. The 630 MHz maximum clock rating supports demanding pipeline stages, and the 90 nm CMOS implementation is suited to cost-sensitive embedded vision systems. System timing, image-memory bandwidth, video standards, and camera-interface voltage levels must be verified before schematic release.
Recomendado
Data Acquisition and Signal Conditioning
The AMD XC3S1500-4FG320C fits parallel data-acquisition systems requiring digital filtering, correlation, decimation, and event detection close to the sensor. Its 29,952 cells can implement multiple parallel processing channels, while 221 user I/O pins support digital sensor buses, capture clocks, trigger signals, and status controls. The device’s 630 MHz maximum clock frequency enables high-rate logical processing, and the 1.2 V core reduces power in space-constrained instrumentation. Conversion resolution, sampling architecture, analog front-end bandwidth, and timing closure remain system-level considerations that require separate validation.
Recomendado
Embedded Communications Gateway
The XC3S1500-4FG320C can implement protocol conversion, packet filtering, framing, and routing in embedded communications equipment. Its large 29,952-cell resource count supports parallel logic paths, while 221 user I/O pins can connect transceivers, memories, status LEDs, and management interfaces. The 630 MHz maximum clock frequency supports demanding serial-to-parallel and packet-processing tasks, and the 1.2 V core is compatible with contemporary digital power architectures. Exact protocols, signal rates, memory interfaces, and I/O standards must be selected from the device documentation and validated with implementation-level timing checks.
Recomendado
Video Timing and Display Control
The XC3S1500-4FG320C is appropriate for programmable video timing, pixel processing, test-pattern generation, and display-interface control. The 29,952 cells allow multiple counters, line and pixel timing generators, and parallel image operations to operate concurrently, while 221 user I/O pins provide external connectivity for video data and synchronization. Its 630 MHz maximum clock frequency supports demanding timing pipelines and the 320-ball package supports dense board layouts. Video timing standards, color depth, refresh rate, external memory requirements, and connector signaling must be confirmed before the design is released for production.
Recomendado
Network Packet Processing
The AMD XC3S1500-4FG320C can implement high-throughput packet classification, filtering, aggregation, and protocol bridging in cost-conscious network appliances. Its 29,952 cells support parallel datapaths, and its 630 MHz maximum clock frequency provides a high clocking ceiling for synchronous packet-processing logic. The 221 user I/O pins can accommodate external memory, PHY control, and status interfaces, while the 1.2 V core suits modern low-voltage systems. Designers must establish packet-rate targets, buffering architecture, memory timing, and I/O standards, then verify timing closure and worst-case routing performance in the selected implementation flow.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC3S1500-4FG320C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC3S1500-4FGG320C | XC3S1500-4FG320I | XC3S1500-4FGG320I | XC3S1500L-4FG320C | XC3S1500L-4FGG320C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| Package | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA | 320-pin FBGA |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3L | Spartan-3L |
| System Gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates | 1,500,000 gates |
| Total Cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells |
Diferenciadores clave
- Direct package-matched family option with unchanged core resource rating (frente a XC3S1500-4FGG320C)
- Extended-temperature alternative without changing the listed logic resources (frente a XC3S1500-4FG320I)
- Low-power family option in the same package class (frente a XC3S1500L-4FG320C)
Notas de diseño
Treat the 320-ball FBGA as a high-density, escape-routing problem. Follow the AMD package and board-layout recommendations for ball assignments, via-in-pad construction, solder-mask definition, and fanout. Place decoupling capacitors at the associated core and I/O supply balls with short ground returns, and route configuration signals away from noisy switching nodes. Because no 320-ball package diagram is available in the component diagram library, use the official AMD package drawing rather than estimating ball locations.
Assign every external signal against the official 320-ball pin table and verify its supported I/O standard, voltage range, drive strength, and termination requirements. The 221 user I/O pins are only a subset of all package balls because power, ground, configuration, clock, and other dedicated connections also occupy the package. Run post-route timing analysis after final I/O constraints are applied, and test worst-case signal rates because clock timing capability does not guarantee compliance with every external interface standard.
Do not treat suffixes such as C, I, FG, and FGG as interchangeable without checking the ordering table. The C and I endings distinguish commercial and extended-temperature device grades, while the package-code characters require comparison with the exact AMD package drawing. Likewise, the Spartan-3L variants are not identical to standard Spartan-3 devices. Before substituting a candidate, compare the pinout, configuration interface, supply sequencing, timing grade, supported I/O standards, and the design’s bitstream compatibility.
Design the 1.2 V core rail for the XC3S1500-4FG320C using the device’s documented core and I/O supply requirements. Place bulk and high-frequency decoupling according to the manufacturer’s power-distribution guidance, keep switching-regulator loops away from configuration and clock inputs, and use separate return paths for quiet and noisy current. Validate startup, sequencing, voltage droop, and current margin under maximum clocking and I/O activity rather than sizing the supply only for average laboratory operation.
Información de cumplimiento
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is present in the product records. AEC-Q100 is not applicable to this general-purpose programmable-logic device.