XC3S50AN-4FT256C - 50K Spartan-3AN FPGA | AMD
N.º de pieza: XC3S50AN-4FT256C ✗ Fin de vidaXC3S50AN-4FT256C Descripción general
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the broader programmable-logic hierarchy: programmable logic device, configurable logic device, FPGA, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA permits design changes, parallel processing, and hardware adaptation without changing the printed circuit board. The Spartan-3AN family combines configurable logic blocks, dedicated block RAM, and DSP resources in a programmable SoC-oriented architecture.
Key device characteristics include 55,296 combinational gates, 1,584 configurable logic cells, 176 configurable logic blocks, 195 user I/O, and a listed maximum operating frequency of 667 MHz. The 90 nm fabrication process and 1.2 V core supply place the device in the classic low-power Spartan architecture. Its large BGA package also provides many signal connections for high-pin-count designs, although the dense ball grid requires careful escape-routing and assembly planning.
The Spartan-3AN architecture supports parallel datapath implementation because multiple configurable logic blocks and dedicated arithmetic resources can operate concurrently. This is valuable for filters, fixed-point transforms, serial interfaces, and control logic that would require multiple conventional components in a fixed implementation. Designers can partition a system among lookup tables, flip-flops, block RAM, DSP arithmetic, dedicated I/O, and general-purpose I/O, then validate timing through the Spartan-3 FPGA design flow.
Typical uses include industrial automation, data acquisition, instrumentation, communications infrastructure, embedded control, and digital signal-processing subsystems. The 195 I/O count supports multi-channel data collection and external interfaces, while the 667 MHz listed clock rate provides a high-speed fabric for pipelined processing. For designs requiring secure remote updates, embedded memory, or asynchronous serial configuration, the family-level Spartan-3AN features should be checked against the exact configuration and memory requirements.
Board design requires careful attention to the 256-BGA footprint, multilayer PCB construction, via-in-pad and solder-mask practices where appropriate, and decoupling of the 1.2 V core and I/O supplies. Maintain the voltage and decoupling recommendations in the AMD Spartan-3AN family data sheet, and verify the pinout against the selected 256-ball package drawing rather than relying on family-level diagrams.
This product record combines the exact ordering code, package information, Spartan-3AN resource figures, configuration references, and practical replacement guidance. It is intended to help engineers confirm footprint compatibility, evaluate known same-family alternatives, and plan an FPGA migration without overlooking bitstream, timing, assembly, or tool-chain consequences.
Alternativas directas para XC3S50AN-4FT256C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC3S50AN-4FT256C (mismo factor de forma y huella) — difiere en Device Type, Logic Cells, Package, User I/O, Process Technology.
XC3S50AN-4FTG256C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S50AN-4FTG256I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S50A-4FTG256C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC3S50A-4FTG256I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S50AN-4FT256C Valores máximos y características eléctricas
| Device Type | FPGA |
| FPGA Family | Spartan-3AN |
| Equivalent Logic Gates | 50,000 gates |
| Combinational Gates | 55,296 gates |
| Logic Cells | 1,584 cells |
| Configurable Logic Blocks | 176 CLBs |
| Frecuencia de reloj máxima | 667 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| User I/O | 195 I/O |
| Outputs | 112 outputs |
| Encapsulado | 256-LBGA |
| Tipo de montaje | Surface Mount |
Guía de configuración de pines de XC3S50AN-4FT256C 256-lbga
Configuración de pines para XC3S50AN-4FT256C (encapsulado 256-lbga). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC3S50AN-4FT256C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC3S50AN-4FT256C es adecuado para 6 aplicacións: Industrial Automation Controller, Digital Signal Processing, Communications Interface, Data Acquisition and Instrumentation, Embedded Control and Sensor Hub, Legacy Communication Adapter.
Industrial Automation Controller
The XC3S50AN-4FT256C fits compact industrial control systems that coordinate sensors, actuators, interlocks, and machine-state logic. Its 1,584 logic cells and 176 configurable logic blocks provide parallel control and datapath capacity, while 195 I/O leave substantial connectivity for digital field signals. A designer can place state machines, counters, communication interfaces, and safety-adjacent supervisory logic in the same programmable fabric. The 1.2 V core operates at a listed maximum clock frequency of 667 MHz, allowing pipelined processing where timing closure permits. Before production use, confirm the exact temperature range, supported I/O standards, clock tolerance, and power sequencing for the selected package and qualification grade.
Recomendado
Digital Signal Processing
The Spartan-3AN architecture makes the XC3S50AN-4FT256C relevant to parallel digital signal processing, including filtering, modulation, correlation, and fixed-point arithmetic. The device combines 1,584 logic cells, 176 configurable logic blocks, dedicated family-level DSP capability, and a listed 667 MHz maximum clock. Those resources allow several lanes to operate concurrently rather than forcing a sequential processor architecture. The 90 nm, 1.2 V implementation is appropriate for legacy embedded systems that prioritize programmable density over the power profile of a modern FPGA. Actual throughput depends on multiplier use, pipeline depth, memory mapping, and timing closure, so use the AMD family data sheet to confirm the exact DSP and block-RAM budget.
Recomendado
Communications Interface
The XC3S50AN-4FT256C can implement communication adapters, protocol converters, packet conditioners, and test interfaces in a single FPGA. Its 195 I/O provide connections for parallel data buses, clocks, control signals, and multiple serial channels, while the programmable fabric can support clock-domain crossing, framing, error checking, and buffering. The listed 1,584 logic cells and 667 MHz clock capability make it suitable for moderate-rate line-card and embedded-network functions. A production design should match each interface to a correctly characterized I/O standard, apply clocking and impedance-control techniques, and reserve configuration resources for bitstream loading. Configuration memory capacity and supported serial or parallel modes must be confirmed from the family documentation.
Recomendado
Data Acquisition and Instrumentation
For measurement systems, the XC3S50AN-4FT256C can combine control sequencing, digital filtering, sample buffering, timestamp logic, and communication in one configurable device. The 195 I/O support multiple acquisition channels and parallel buses, while 176 configurable logic blocks allow sample-path logic and system control to proceed concurrently. A listed 667 MHz maximum clock provides headroom for pipelined acquisition stages, although ADC latency and converter interface timing remain external constraints. Use the manufacturer's pin-description tables to assign data, clock, and control pins correctly, and design the PCB for the 256-BGA footprint with controlled impedance and careful decoupling.
Recomendado
Embedded Control and Sensor Hub
The XC3S50AN-4FT256C is suitable for legacy embedded systems that need sensor fusion, thresholding, local filtering, and actuator coordination. Its programmable logic can evaluate multiple sensor channels concurrently, while 195 I/O provide ample digital connectivity for sensors, memory, and external controllers. The 1.2 V core and 90 nm process reflect the architecture of established Spartan-3AN designs, making the device useful when maintaining an existing AMD Xilinx tool flow is important. Validate that each sensor interface, timing requirement, and low-power mode fits the device's electrical capabilities. Also verify the operating-temperature grade and lifecycle constraints before committing to a long-lived industrial deployment.
Recomendado
Legacy Communication Adapter
A compact adapter built around the XC3S50AN-4FT256C can bridge legacy parallel buses to newer serial links, implement protocol conversion, or add reconfigurable test logic to an established system. The FPGA's 195 I/O allow broad parallel-bus access, and its 176 configurable logic blocks can host state machines, data integrity checks, and timing-based control paths. The listed 1.2 V supply and 667 MHz maximum clock support a conventional Spartan-3AN power and timing design. For drop-in board maintenance, compare the precise ordering suffix and package drawing with the installed device. For new production, account for the legacy family's lifecycle status and confirm configuration-tool support before committing to an architecture.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC3S50AN-4FT256C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC3S50AN-4FTG256C | XC3S50AN-4FTG256I | XC3S50A-4FTG256C | XC3S50A-4FTG256I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 256-LBGA | 256-LBGA - same | 256-LBGA - same | 256-FTBGA - same package class | 256-FTBGA - same package class |
| FPGA Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3A | Spartan-3A |
| Equivalent Logic Gates | 50,000 gates | 50,000 gates | 50,000 gates | 50,000 gates | 50,000 gates |
| Logic Cells | 1,584 cells | 1,584 cells | 1,584 cells | 1,584 cells | 1,584 cells |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
Diferenciadores clave
- Spartan-3AN resource set in a 256-ball package (frente a XC3S50A-4FTG256C)
- Close same-family replacement with matching listed core resources (frente a XC3S50AN-4FTG256C)
- Industrial-oriented ordering option in the same footprint (frente a XC3S50AN-4FTG256I)
Notas de diseño
Design the board around the exact 256-LBGA FT256 footprint and follow the AMD package drawing for pad, solder-mask, and land-pattern dimensions. Dense ball assignments require multilayer construction, short escape routes, and adequate via access around the device. Treat the package as a fine-pitch assembly rather than a generic grid array: validate pad-to-mask ratios, assembly stencil geometry, component placement clearances, and X-ray inspection requirements before releasing the PCB.
Implement separate, low-impedance distribution paths for the 1.2 V core and applicable I/O supplies, following the AMD family's voltage, decoupling, and sequencing requirements. Place high-frequency decoupling capacitance directly at the relevant power and ground balls, and keep supply-return paths continuous beneath the device. The 667 MHz figure is a device capability rather than a guaranteed operating point; verify static and dynamic current against the selected resource mix before finalizing regulators and copper area.
Do not treat a shared package outline as proof of drop-in electrical equivalence. Before replacing XC3S50AN-4FT256C, compare the full ordering suffix, temperature grade, speed grade, supported I/O standards, configuration interface, clocking resources, block-RAM capacity, DSP resources, and voltage limits. Spartan-3A alternatives may match the listed gate count and footprint while differing in electrical characteristics or dedicated resources. Regenerate and verify timing after any substitution.
Assign clock-capable pins deliberately and review every high-speed interface against the selected I/O standard, trace length, impedance, loading, and external clock quality. Add series termination where the signal-integrity analysis requires it, keep sensitive clock routes short, and avoid crossing return-current discontinuities. For legacy boards, inspect connector and via transitions as part of the complete signal path rather than validating only the FPGA-to-component segment.
Información de cumplimiento
The available device pages do not state the target part's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes with AMD or the authorized supply channel before regulated production use.