XC4VLX40-11FFG668I - 41,472 Logic Cell FPGA | Xilinx
N.º de pieza: XC4VLX40-11FFG668I ✗ Fin de vidaXC4VLX40-11FFG668I Descripción general
A field-programmable gate array, or FPGA, is a semiconductor whose logic, routing, and I/O resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides parallel hardware acceleration for signal processing, protocol handling, interface bridging, control, and test systems. Unlike a fixed-function processor, its internal datapaths can execute several operations simultaneously, making it suitable for workloads requiring predictable throughput and low latency.
The Virtex-4 LX architecture combines 41,472 logic cells with 176,9472 as listed in the distributor record, along with dedicated block RAM and digital signal-processing resources. The device provides 448 I/O sites and uses a nominal 1.2 V core supply. The -11 speed grade places it between the faster -12 grade and the lower-speed -10 grade, providing a practical balance of performance, power, and design maturity for established Virtex-4 systems.
The 668-ball FCBGA package supports dense board-level integration but demands careful escape-routing, via assignment, and power-plane design. High-speed signals require short, impedance-controlled paths, while separate power and ground distribution must minimize supply-noise coupling into configurable logic and memory. Because this family uses an older CMOS process, designers should account for legacy tooling, bitstream compatibility, and end-of-life procurement constraints when starting a new design.
Typical applications include telecommunications line-card control, industrial automation, high-speed data acquisition, radar and signal-processing infrastructure, storage controllers, networking equipment, and test-and-measurement systems. The large logic fabric is especially useful when multiple parallel pipelines must operate concurrently, while the 448 I/O sites can connect processors, memory, transceivers, clocks, and high-speed parallel interfaces.
For a new PCB, preserve the 1.0 mm ball pitch, define every power and ground ball according to the manufacturer pinout, and validate layer transitions before fabrication. Do not substitute a 1.0 mm FCBGA footprint with a 668-ball FBGA arrangement based only on ball count; package ball maps, keep-out regions, and solder-ball definitions must match exactly. Legacy Vivado or ISE projects should also be checked for the exact device, package, speed grade, and temperature-grade suffix.
This page consolidates the exact manufacturer part number, package and logic-density details, sourcing information, drop-in family options, comparison parameters, and practical design guidance. It also distinguishes true temperature-grade alternatives from broader Virtex-4 devices that require a different package, pin map, or design migration.
Alternativas directas para XC4VLX40-11FFG668I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC4VLX40-11FFG668I (mismo factor de forma y huella) — difiere en Device Type, Package Type, Speed Grade, Core Supply Voltage, Logic Cells.
XC4VLX40-11FFG668C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC4VLX40-10FFG668I
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC4VLX40-12FFG668I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VLX40-9FFG668I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VLX40-10FFG668C
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC4VLX40-11FFG668I Valores máximos y características eléctricas
| Device Type | Virtex-4 LX Field Programmable Gate Array (FPGA) |
| Logic Cells | 41,472 cells |
| I/O Sites | 448 sites |
| Encapsulado | 668-ball FCBGA, 1.0 mm pitch |
| Core Supply Voltage | 1.2 V nominal |
| Speed Grade | -11 |
| Temperature Grade | Industrial grade |
| Logic Technology | CMOS |
| Total Ball Count | 668 balls |
| Package Ball Pitch | 1.0 mm |
| Lead-Free Package Designator | FFG |
| Device Marking Suffix | I |
Guía de configuración de pines de XC4VLX40-11FFG668I ffg
Configuración de pines para XC4VLX40-11FFG668I (encapsulado ffg). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC4VLX40-11FFG668I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC4VLX40-11FFG668I es adecuado para 6 aplicacións: Industrial Automation Controller, High-Speed Data Acquisition, Telecommunications Line Card, Radar Signal Processing, Test and Measurement Instrument, Network Storage Controller.
Industrial Automation Controller
The XC4VLX40-11FFG668I fits an industrial automation controller that must combine multiple deterministic control channels with extensive external connectivity. Its 41,472 logic cells allow several control pipelines, state machines, and communication engines to operate in parallel, while 448 I/O sites support sensors, actuator drivers, encoders, and digital isolation. The -11 speed grade provides useful timing margin for moderately complex logic, and the industrial suffix supports equipment intended for wider ambient conditions. Place the 1.2 V core on a dedicated, low-impedance power plane and route all 668 balls exactly according to the manufacturer ball map before considering high-speed serial or external-memory interfaces.
Recomendado
High-Speed Data Acquisition
The XC4VLX40-11FFG668I is suitable for a parallel data-acquisition frontend that must merge multiple input channels and perform filtering or formatting at high throughput. The 41,472-cell fabric can host acquisition control, channel interleaving, counters, trigger logic, and data packing concurrently rather than forcing those operations through a sequential processor. Its 448 I/O sites can support parallel ADC, DAC, clock, and status connections, while the -11 grade targets performance between the -10 and -12 Virtex-4 options. Critical timing paths should use short traces, matched layers, and controlled clock routing, while the FCBGA power grid must be designed to minimize voltage disturbance during simultaneous switching.
Recomendado
Telecommunications Line Card
The XC4VLX40-11FFG668I can implement parallel traffic handling, protocol termination, switching, and monitoring functions in a telecommunications line card. Its large 41,472-logic-cell fabric allows multiple packet-processing paths to coexist, while 448 I/O sites provide dense connectivity to backplane transceivers, network processors, clocks, and status logic. The -11 speed grade is appropriate for established designs that require a balanced combination of throughput and power rather than the absolute performance of the -12 grade. Because this is a mature FCBGA FPGA, the line-card layout should include continuous core and I/O planes, carefully assigned decoupling, and unobstructed escape routing for every ball.
Recomendado
Radar Signal Processing
The XC4VLX40-11FFG668I is well matched to radar front ends that require parallel filtering, correlation, detection, timing, and data-format conversion. Its 41,472 logic cells can implement multiple concurrent pipelines, and its 448 I/O sites can connect converters, memory interfaces, clock-distribution circuits, and status hardware without relying entirely on an external processor. The -11 speed grade provides a practical performance point for established Virtex-4 signal-processing designs. Use the exact FFG668 ball assignments for power, ground, configuration, and user I/O, and reserve adequate PCB area for thermal copper and via arrays so that dense switching activity does not degrade timing margin.
Recomendado
Test and Measurement Instrument
The XC4VLX40-11FFG668I can serve as the timing, sequencing, and pattern-control core inside a test-and-measurement instrument. Parallel logic resources support instrument control, trigger generation, measurement correlation, and data capture, while 448 I/O sites provide access to external channels, relays, front ends, and status buses. The -11 speed grade is suited to high-throughput coordinated measurements without requiring the absolute timing capability of a -12 device. Printed-circuit-board design should preserve clean clock references, isolate sensitive analog areas, provide robust power distribution, and use manufacturer-defined ball assignments for configuration pins and dedicated supply balls.
Recomendado
Network Storage Controller
The XC4VLX40-11FFG668I can implement a storage-facing controller with parallel command queues, data steering, error handling, and protocol logic. The 41,472 logic cells offer enough parallelism to maintain multiple data paths, while 448 I/O sites can support external processors, memory controllers, clocks, and status or interrupt signals. The -11 grade provides a useful timing target for established designs and may simplify reuse of an existing Virtex-4 codebase. The FCBGA implementation should keep memory and high-speed interface routes short, provide adequate decoupling at every power ball, and follow the official pinout files rather than assigning power and ground positions by convention.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC4VLX40-11FFG668I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC4VLX40-11FFG668C | XC4VLX40-10FFG668I | XC4VLX40-12FFG668I | XC4VLX40-9FFG668I | XC4VLX40-10FFG668C |
|---|---|---|---|---|---|---|
| Package | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Logic Cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells |
| I/O Sites | 448 sites | 448 sites | 448 sites | 448 sites | 448 sites | 448 sites |
| Speed Grade | -11 | -11 | -10 | -12 | -9 | -10 |
| Temperature Suffix | I - Industrial | C - Commercial | I - Industrial | I - Industrial | I - Industrial | C - Commercial |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Package Ball Pitch | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm |
| Special Features | Industrial temperature grade | Commercial temperature grade | Industrial temperature grade, lower speed grade | Industrial temperature grade, higher speed grade | Industrial temperature grade, lower speed grade | Commercial temperature grade, lower speed grade |
Diferenciadores clave
- Retains industrial temperature capability within the same exact package family (frente a XC4VLX40-11FFG668C)
- Provides a faster speed-grade option with identical logic and I/O density (frente a XC4VLX40-10FFG668I)
- Matches the principal architecture without changing the board footprint (frente a XC4VLX40-10FFG668C)
Notas de diseño
Use the manufacturer FFG668 ball map as the authority for every power, ground, configuration, and user-I/O connection. Preserve the 1.0 mm pitch and provide continuous copper for the 1.2 V core and I/O supplies, with multiple nearby decoupling positions and via arrays that satisfy the package's current requirements. A 668-ball count alone does not establish footprint equivalence; compare the official ball map, package outline, keep-out, and solder-ball definition before reusing a PCB.
Plan the power tree for the nominal 1.2 V core separately from any auxiliary I/O supplies. Sequence the rails in the order required by the design, monitor startup behavior, and use the manufacturer-recommended bulk and local capacitance at the device. Because transient current from a large programmable fabric can be substantial, use low-impedance supply planes and verify droop with realistic switching activity rather than only idle current.
Route clocks, memory interfaces, and other high-speed nets as short, impedance-controlled paths on appropriate adjacent layers. Avoid long stubs, test-point discontinuities, and splits across plane boundaries where possible. Keep the configuration, clock, and high-speed routing regions separated from noisy switching nodes, and validate the complete stack-up with the PCB fabricator rather than applying a generic 50-ohm rule to every signal.
The 668-ball FCBGA relies heavily on its PCB thermal construction for heat removal. Provide uninterrupted ground and power copper beneath the device, distribute thermal vias according to package and power requirements, and avoid placing temperature-sensitive analog circuitry directly under the hottest region. Use the manufacturer's power and thermal data with the final board stack-up and enclosure conditions; no board-level temperature rise should be inferred without those inputs.
Información de cumplimiento
The distributor listing identifies the FFG package as Pb-Free. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.