XC4VLX40-11FFG668I - 41,472 Logic Cell FPGA | Xilinx
料号: XC4VLX40-11FFG668I ✗ 停产XC4VLX40-11FFG668I 概述
A field-programmable gate array, or FPGA, is a semiconductor whose logic, routing, and I/O resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides parallel hardware acceleration for signal processing, protocol handling, interface bridging, control, and test systems. Unlike a fixed-function processor, its internal datapaths can execute several operations simultaneously, making it suitable for workloads requiring predictable throughput and low latency.
The Virtex-4 LX architecture combines 41,472 logic cells with 176,9472 as listed in the distributor record, along with dedicated block RAM and digital signal-processing resources. The device provides 448 I/O sites and uses a nominal 1.2 V core supply. The -11 speed grade places it between the faster -12 grade and the lower-speed -10 grade, providing a practical balance of performance, power, and design maturity for established Virtex-4 systems.
The 668-ball FCBGA package supports dense board-level integration but demands careful escape-routing, via assignment, and power-plane design. High-speed signals require short, impedance-controlled paths, while separate power and ground distribution must minimize supply-noise coupling into configurable logic and memory. Because this family uses an older CMOS process, designers should account for legacy tooling, bitstream compatibility, and end-of-life procurement constraints when starting a new design.
Typical applications include telecommunications line-card control, industrial automation, high-speed data acquisition, radar and signal-processing infrastructure, storage controllers, networking equipment, and test-and-measurement systems. The large logic fabric is especially useful when multiple parallel pipelines must operate concurrently, while the 448 I/O sites can connect processors, memory, transceivers, clocks, and high-speed parallel interfaces.
For a new PCB, preserve the 1.0 mm ball pitch, define every power and ground ball according to the manufacturer pinout, and validate layer transitions before fabrication. Do not substitute a 1.0 mm FCBGA footprint with a 668-ball FBGA arrangement based only on ball count; package ball maps, keep-out regions, and solder-ball definitions must match exactly. Legacy Vivado or ISE projects should also be checked for the exact device, package, speed grade, and temperature-grade suffix.
This page consolidates the exact manufacturer part number, package and logic-density details, sourcing information, drop-in family options, comparison parameters, and practical design guidance. It also distinguishes true temperature-grade alternatives from broader Virtex-4 devices that require a different package, pin map, or design migration.
直接替换替代料: XC4VLX40-11FFG668I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC4VLX40-11FFG668I (相同外形与封装尺寸) ——差异在于 Device Type, Package Type, Speed Grade, Core Supply Voltage, Logic Cells.
XC4VLX40-11FFG668C
✅ 直接替换联系询价
查看数据手册 →XC4VLX40-10FFG668I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC4VLX40-12FFG668I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VLX40-9FFG668I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VLX40-10FFG668C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC4VLX40-11FFG668I 最大额定值与电气特性
| Device Type | Virtex-4 LX Field Programmable Gate Array (FPGA) |
| Logic Cells | 41,472 cells |
| I/O Sites | 448 sites |
| 封装 | 668-ball FCBGA, 1.0 mm pitch |
| Core Supply Voltage | 1.2 V nominal |
| Speed Grade | -11 |
| Temperature Grade | Industrial grade |
| Logic Technology | CMOS |
| Total Ball Count | 668 balls |
| Package Ball Pitch | 1.0 mm |
| Lead-Free Package Designator | FFG |
| Device Marking Suffix | I |
XC4VLX40-11FFG668I ffg 引脚配置指南
XC4VLX40-11FFG668I(ffg 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC4VLX40-11FFG668I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC4VLX40-11FFG668I 适用于 6 应用s: Industrial Automation Controller, High-Speed Data Acquisition, Telecommunications Line Card, Radar Signal Processing, Test and Measurement Instrument, Network Storage Controller.
Industrial Automation Controller
The XC4VLX40-11FFG668I fits an industrial automation controller that must combine multiple deterministic control channels with extensive external connectivity. Its 41,472 logic cells allow several control pipelines, state machines, and communication engines to operate in parallel, while 448 I/O sites support sensors, actuator drivers, encoders, and digital isolation. The -11 speed grade provides useful timing margin for moderately complex logic, and the industrial suffix supports equipment intended for wider ambient conditions. Place the 1.2 V core on a dedicated, low-impedance power plane and route all 668 balls exactly according to the manufacturer ball map before considering high-speed serial or external-memory interfaces.
推荐
High-Speed Data Acquisition
The XC4VLX40-11FFG668I is suitable for a parallel data-acquisition frontend that must merge multiple input channels and perform filtering or formatting at high throughput. The 41,472-cell fabric can host acquisition control, channel interleaving, counters, trigger logic, and data packing concurrently rather than forcing those operations through a sequential processor. Its 448 I/O sites can support parallel ADC, DAC, clock, and status connections, while the -11 grade targets performance between the -10 and -12 Virtex-4 options. Critical timing paths should use short traces, matched layers, and controlled clock routing, while the FCBGA power grid must be designed to minimize voltage disturbance during simultaneous switching.
推荐
Telecommunications Line Card
The XC4VLX40-11FFG668I can implement parallel traffic handling, protocol termination, switching, and monitoring functions in a telecommunications line card. Its large 41,472-logic-cell fabric allows multiple packet-processing paths to coexist, while 448 I/O sites provide dense connectivity to backplane transceivers, network processors, clocks, and status logic. The -11 speed grade is appropriate for established designs that require a balanced combination of throughput and power rather than the absolute performance of the -12 grade. Because this is a mature FCBGA FPGA, the line-card layout should include continuous core and I/O planes, carefully assigned decoupling, and unobstructed escape routing for every ball.
推荐
Radar Signal Processing
The XC4VLX40-11FFG668I is well matched to radar front ends that require parallel filtering, correlation, detection, timing, and data-format conversion. Its 41,472 logic cells can implement multiple concurrent pipelines, and its 448 I/O sites can connect converters, memory interfaces, clock-distribution circuits, and status hardware without relying entirely on an external processor. The -11 speed grade provides a practical performance point for established Virtex-4 signal-processing designs. Use the exact FFG668 ball assignments for power, ground, configuration, and user I/O, and reserve adequate PCB area for thermal copper and via arrays so that dense switching activity does not degrade timing margin.
推荐
Test and Measurement Instrument
The XC4VLX40-11FFG668I can serve as the timing, sequencing, and pattern-control core inside a test-and-measurement instrument. Parallel logic resources support instrument control, trigger generation, measurement correlation, and data capture, while 448 I/O sites provide access to external channels, relays, front ends, and status buses. The -11 speed grade is suited to high-throughput coordinated measurements without requiring the absolute timing capability of a -12 device. Printed-circuit-board design should preserve clean clock references, isolate sensitive analog areas, provide robust power distribution, and use manufacturer-defined ball assignments for configuration pins and dedicated supply balls.
推荐
Network Storage Controller
The XC4VLX40-11FFG668I can implement a storage-facing controller with parallel command queues, data steering, error handling, and protocol logic. The 41,472 logic cells offer enough parallelism to maintain multiple data paths, while 448 I/O sites can support external processors, memory controllers, clocks, and status or interrupt signals. The -11 grade provides a useful timing target for established designs and may simplify reuse of an existing Virtex-4 codebase. The FCBGA implementation should keep memory and high-speed interface routes short, provide adequate decoupling at every power ball, and follow the official pinout files rather than assigning power and ground positions by convention.
推荐
推荐产品汇总
工程参考数据: XC4VLX40-11FFG668I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC4VLX40-11FFG668C | XC4VLX40-10FFG668I | XC4VLX40-12FFG668I | XC4VLX40-9FFG668I | XC4VLX40-10FFG668C |
|---|---|---|---|---|---|---|
| Package | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Logic Cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells |
| I/O Sites | 448 sites | 448 sites | 448 sites | 448 sites | 448 sites | 448 sites |
| Speed Grade | -11 | -11 | -10 | -12 | -9 | -10 |
| Temperature Suffix | I - Industrial | C - Commercial | I - Industrial | I - Industrial | I - Industrial | C - Commercial |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Package Ball Pitch | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm |
| Special Features | Industrial temperature grade | Commercial temperature grade | Industrial temperature grade, lower speed grade | Industrial temperature grade, higher speed grade | Industrial temperature grade, lower speed grade | Commercial temperature grade, lower speed grade |
关键差异点
- Retains industrial temperature capability within the same exact package family (对比 XC4VLX40-11FFG668C)
- Provides a faster speed-grade option with identical logic and I/O density (对比 XC4VLX40-10FFG668I)
- Matches the principal architecture without changing the board footprint (对比 XC4VLX40-10FFG668C)
设计说明
Use the manufacturer FFG668 ball map as the authority for every power, ground, configuration, and user-I/O connection. Preserve the 1.0 mm pitch and provide continuous copper for the 1.2 V core and I/O supplies, with multiple nearby decoupling positions and via arrays that satisfy the package's current requirements. A 668-ball count alone does not establish footprint equivalence; compare the official ball map, package outline, keep-out, and solder-ball definition before reusing a PCB.
Plan the power tree for the nominal 1.2 V core separately from any auxiliary I/O supplies. Sequence the rails in the order required by the design, monitor startup behavior, and use the manufacturer-recommended bulk and local capacitance at the device. Because transient current from a large programmable fabric can be substantial, use low-impedance supply planes and verify droop with realistic switching activity rather than only idle current.
Route clocks, memory interfaces, and other high-speed nets as short, impedance-controlled paths on appropriate adjacent layers. Avoid long stubs, test-point discontinuities, and splits across plane boundaries where possible. Keep the configuration, clock, and high-speed routing regions separated from noisy switching nodes, and validate the complete stack-up with the PCB fabricator rather than applying a generic 50-ohm rule to every signal.
The 668-ball FCBGA relies heavily on its PCB thermal construction for heat removal. Provide uninterrupted ground and power copper beneath the device, distribute thermal vias according to package and power requirements, and avoid placing temperature-sensitive analog circuitry directly under the hottest region. Use the manufacturer's power and thermal data with the final board stack-up and enclosure conditions; no board-level temperature rise should be inferred without those inputs.
合规信息
The distributor listing identifies the FFG package as Pb-Free. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.