XC4VSX55-10FFG1148C - 55K Logic Cell Virtex-4 SX FPGA | AMD
N.º de pieza: XC4VSX55-10FFG1148C ✓ ActivoXC4VSX55-10FFG1148C Descripción general
An FPGA is a programmable semiconductor containing configurable logic, memory, input/output resources, and dedicated processing blocks. Unlike a fixed-function ASIC, an FPGA can be reconfigured after manufacture to implement digital protocols, control logic, signal processing, or interface functions. The Virtex-4 SX belongs to the FPGA hierarchy alongside LUT-based programmable logic devices and is optimized for large designs requiring substantial parallel processing and I/O bandwidth.
The device provides 55,296 logic cells organized as 6,144 configurable logic blocks, with 640 user I/O. Its CMOS implementation and 1,028 MHz internal frequency make it suitable for demanding communications, DSP, networking, and data-processing systems. The 1,148-pin FCBGA package supports dense board-level integration and high-speed external connectivity, while its fine-pitch construction requires careful PCB layout, thermal design, and assembly process control.
The -10 speed grade places this component within the Virtex-4 performance range. Designs must account for setup timing, clock skew, I/O timing, and configured resource placement rather than treating the stated internal frequency as a guaranteed system clock. Synchronous design practices, registered interfaces, and timing-constrained implementation are essential for predictable performance across the complete board and inter-chip communication paths.
Typical uses include high-throughput signal processing, telecommunications data paths, industrial control, high-speed networking equipment, and embedded test systems. The large logic-cell count and extensive I/O resources allow parallel algorithms and multiple interface domains to be consolidated in one device. Designs that exceed a single device's resources can also use FPGA interconnect for multi-device systems, subject to timing and pin-budget constraints.
A principal design consideration is the 1,148-pin FCBGA implementation. Use the manufacturer's pinout and package-mechanical documentation for every ball assignment, power plane, decoupling connection, and board stack-up. Preserve adequate thermal paths beneath the device because sustained logic activity can raise junction temperature, and apply the manufacturer's power, decoupling, and high-speed routing guidance consistently.
This product page combines the exact device identity, verified architecture figures, package information, application guidance, comparison points, and practical implementation considerations needed to evaluate the XC4VSX55-10FFG1148C before beginning schematic capture or PCB layout.
Alternativas directas para XC4VSX55-10FFG1148C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC4VSX55-10FFG1148C (mismo factor de forma y huella) — difiere en Device Type, Mounting Type, Operating Temperature, Package Type, Logic Family.
XC4VSX55-10FFG1148I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC4VSX55-11FFG1148C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC4VSX55-10FF1148C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC4VSX55-12FFG1148C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VSX55-11FFG1148I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VSX55-10FFG1148C Valores máximos y características eléctricas
| Device Type | Virtex-4 SX field-programmable gate array (FPGA) |
| Logic Cells | 55,296 cells |
| Configurable Logic Blocks | 6,144 CLBs |
| User I/O | 640 I/O |
| Internal Frequency | 1,028 MHz |
| Logic Family | CMOS |
| Package Type | 1,148-pin FCBGA |
| Package Designation | FFG1148 |
| Package Pitch | 1 mm |
| Number of Package Pins | 1,148 pins |
| Performance Grade | -10 speed grade |
| Temperatura de funcionamiento | 0 C to +85 C |
| Programmable Logic Architecture | 55,296-cell Virtex-4 SX FPGA |
| Tipo de montaje | Surface mount |
| Manufacturer | AMD / Xilinx |
Guía de configuración de pines de XC4VSX55-10FFG1148C 1,148 pins
Configuración de pines para XC4VSX55-10FFG1148C (encapsulado 1,148 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC4VSX55-10FFG1148C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC4VSX55-10FFG1148C es adecuado para 6 aplicacións: Telecommunications Data Processing, High-Throughput DSP Systems, Industrial Control Systems, Networking and Packet Processing, Test and Measurement Equipment, High-Speed Interface Consolidation.
Telecommunications Data Processing
The XC4VSX55-10FFG1148C fits telecommunications data paths that require substantial parallel logic and broad I/O connectivity. Its 55,296 logic cells and 6,144 configurable logic blocks can host packet-processing pipelines, protocol state machines, framing logic, and test instrumentation. The 640 I/O provide interfaces for parallel data buses, clocks, controls, and programmable logic across a communication module. Designers should partition high-speed interfaces, use registered boundaries, and constrain every clock domain. The 1,028 MHz internal-frequency figure represents a device characteristic rather than a guaranteed line rate, so external interface performance must be demonstrated through timing analysis and implementation.
Recomendado
High-Throughput DSP Systems
The XC4VSX55-10FFG1148C is appropriate for parallel DSP systems where independent filters, transforms, correlators, or fixed-point arithmetic stages must execute concurrently. The 55,296-cell Virtex-4 SX fabric provides substantially more configurable logic than a small microcontroller or DSP controller, while 640 I/O support streaming and parallel accelerator interfaces. A practical implementation should map arithmetic pipelines to available DSP resources, pipeline register stages to meet timing, and balance memory interfaces to prevent one shared memory port from becoming a bottleneck. Because the published internal frequency is not a guaranteed application throughput, final performance depends on resource mapping, clocking, and post-route timing results.
Recomendado
Industrial Control Systems
The XC4VSX55-10FFG1148C can consolidate complex industrial sequencing, motion control, safety-adjacent monitoring, and communications in one programmable device. Its 55,296 logic cells provide room for parallel machine-control logic, while 640 I/O simplify connections to sensors, actuators, counters, and fieldbus gateways. The commercial 0 C to +85 C operating range covers many indoor industrial environments, but airflow and enclosure temperature must be verified against the complete system. Critical outputs should use the manufacturer's constraints and design checks rather than relying solely on device I/O counts. Timing-critical control paths should be registered and reviewed with static timing analysis before hardware release.
Recomendado
Networking and Packet Processing
The XC4VSX55-10FFG1148C is suitable for line-card, protocol-conversion, traffic-management, and network-interface applications requiring multiple parallel channels. Its large logic fabric can implement lookups, buffering control, header classification, and stateful protocol functions, while 640 I/O provide ample connections for data buses and line-card peripherals. Designers should use clock-domain-crossing structures for asynchronous external interfaces and preserve timing margin through pipeline registers. The 1,148-pin FCBGA also requires a carefully engineered board with appropriate power delivery, decoupling, escape routing, and assembly capability. Final line-rate suitability must be confirmed by implementation and signal-integrity analysis.
Recomendado
Test and Measurement Equipment
The XC4VSX55-10FFG1148C can implement multi-channel pattern generation, acquisition control, timing sequencing, and real-time analysis in advanced test equipment. Its 6,144 configurable logic blocks allow multiple independent instruments or parallel data engines to coexist, and 640 I/O can connect external converters, memories, triggers, and communication controllers. For precision measurement systems, treat the FPGA as the timing and routing engine while using dedicated converters for analog measurement. Validate input/output timing against the selected I/O standard, apply device constraints, and include power-supply and clocking jitter in the system error budget before laboratory deployment.
Recomendado
High-Speed Interface Consolidation
The XC4VSX55-10FFG1148C can consolidate several high-speed interfaces, protocol bridges, and data acquisition paths when a system requires more I/O and programmable logic than a smaller FPGA provides. The 640-I/O count reduces the need for external interface-switching devices, while the 55,296-cell fabric supports framing, error handling, buffering, and control functions around each link. The fine-pitch 1,148-pin FCBGA nevertheless demands exact ball assignments, layer-transition planning, and assembly-capable PCB geometry. Review the manufacturer's package data and signal-integrity guidelines, and validate each interface independently because logical pin compatibility alone does not guarantee equal eye margin across all speed grades.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC4VSX55-10FFG1148C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC4VSX55-10FFG1148I | XC4VSX55-11FFG1148C | XC4VSX55-10FF1148C | XC4VSX55-12FFG1148C | XC4VSX55-11FFG1148I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1148-pin FCBGA | 1148-pin FCBGA - same | 1148-pin FCBGA - same | 1148-pin FCBGA - same | 1148-pin FCBGA - same | 1148-pin FCBGA - same |
| Speed Grade | -10 | -10 | -11 | -10 | -12 | -11 |
| Temperature Option | Commercial, 0 C to +85 C | Industrial | Commercial | Commercial | Commercial | Industrial |
| Logic Family | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Programming Interface Compatibility | Virtex-4 SX configuration and JTAG resources | Virtex-4 SX configuration and JTAG resources | Virtex-4 SX configuration and JTAG resources | Virtex-4 SX configuration and JTAG resources | Virtex-4 SX configuration and JTAG resources | Virtex-4 SX configuration and JTAG resources |
Diferenciadores clave
- Direct commercial-temperature replacement option (frente a XC4VSX55-10FFG1148I)
- Higher timing-performance option on the same footprint (frente a XC4VSX55-11FFG1148C)
- Commercial and industrial ordering flexibility (frente a XC4VSX55-11FFG1148I)
- High logic and I/O density for parallel processing (frente a XC4VLX60-10FFG668C)
Notas de diseño
Treat the 1,148-pin FCBGA as a fine-pitch, escape-routing-intensive package. Assign every ball directly from the manufacturer pinout, preserve power and ground adjacency, and follow the package-mechanical rules for pad geometry, solder mask, via-in-pad, and assembly capability. A generic BGA footprint is not an acceptable substitute for the exact FFG1148 land pattern.
Build the power-distribution network from the manufacturer's recommended rail, decoupling, and current requirements. Place the required bypass capacitors at their designated package balls or as close as the land pattern permits, and provide low-impedance planes through via arrays beneath the device. Do not infer supply limits from the speed-grade suffix; use the electrical characteristics for the exact ordering code.
Estimate worst-case junction temperature from total FPGA power, board thermal resistance, enclosure airflow, and neighboring heat sources. Route thermal vias into the package's thermal escape structure while preserving electrical via clearances, then verify the temperature margin at operating ambient. The commercial 0 C to +85 C device rating applies to the device and its defined test conditions, not automatically to every internal board region.
Constrain all synchronous interfaces and define clock uncertainty before implementation. Use the device speed grade to set external timing expectations, pipeline latency-heavy paths where needed, and inspect board-level return paths for high-speed links. A change from -10 to -11 or -12 can alter timing margin and power behavior, so replacement parts require fresh static and timing analysis rather than only a footprint check.
Do not equate the listed 1,028 MHz internal frequency with a guaranteed I/O or system clock. It represents a device characteristic, while real performance depends on resource placement, routing, clocking, I/O standards, and external timing. Verify configuration storage, JTAG access, clocking, and reset behavior in hardware, and confirm that the selected alternative retains the required temperature and speed grade.
Información de cumplimiento
The device information identifies the commercial-temperature Virtex-4 SX FPGA but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. The C suffix identifies the commercial temperature option and must not be interpreted as proof of automotive qualification.