Xilinx

XC5VLX30T-1FF323C - 30T Virtex-5 LXT FPGA | Xilinx

N.º de pieza: XC5VLX30T-1FF323C ✗ Fin de vida
FCBGA-323 / FBGA-323 Package 1,098 MHz Speed
MOQ: 1 |

XC5VLX30T-1FF323C Descripción general

Xilinx XC5VLX30T-1FF323C is a Virtex-5 LXT field-programmable gate array with 2,400 logic cells, a listed internal frequency of 1,098 MHz, and 30720 configurable logic-block resources in a 19 mm × 19 mm FCBGA-323 package. It operates in the commercial temperature range of 0°C to +85°C and uses CMOS fabrication technology. The device is intended for designs requiring programmable logic, parallel processing, high-speed interfaces, and application-specific hardware integration.

A field-programmable gate array is a semiconductor whose digital logic can be configured after manufacture. An FPGA sits within the broader programmable-logic hierarchy, alongside complex programmable logic devices and programmable system-on-chip devices. Its architecture combines configurable logic blocks, programmable interconnect, block RAM, dedicated arithmetic and I/O resources. This makes the Virtex-5 LXT family useful where product requirements evolve faster than application-specific ASIC development cycles permit.

The XC5VLX30T-1FF323C combines a 30T-class Virtex-5 LXT configuration with 2,400 listed logic cells and 1,098 MHz listed internal frequency. Its 30720-cell resource figure is associated with the Virtex-5 LXT architecture, while the package exposes 323 contacts in a 19 mm × 19 mm footprint. The -1 suffix identifies the performance grade, while FF323C identifies the FCBGA package and commercial-temperature ordering code.

The FPGA architecture allows parallel datapaths to be implemented instead of relying on sequential microcontroller execution. Dedicated block RAM supports buffering and data storage, programmable I/O can interface with external logic, and the configurable interconnect routes signals among fabric resources. Because the listed internal frequency describes a device capability rather than the final system operating rate, designers must evaluate external memory interfaces, I/O standards, timing constraints, clocking, and board-level signal integrity in the target design.

XC5VLX30T-1FF323C is suitable for industrial control, networking, signal processing, test equipment, communications, embedded vision, and high-speed data-acquisition systems. The commercial temperature range supports equipment deployed in controlled indoor environments, while the large FCBGA-323 package provides extensive physical connectivity for high-pin-count designs. The device can also support prototype development, hardware acceleration, and custom interface logic.

PCB implementation requires careful treatment of the FCBGA-323 footprint, multilayer escape routing, power and ground distribution, and high-speed clock integrity. Designers should use the package drawing, pinout, and recommended PCB stackup in the manufacturer documentation. Thermal performance, power sequencing, configuration memories, decoupling, and I/O voltage compatibility must be addressed before schematic and layout signoff.

This page consolidates device specifications, compatible ordering alternatives, application guidance, and engineering design considerations for engineers evaluating the XC5VLX30T-1FF323C Virtex-5 LXT FPGA. The alternatives are restricted to candidates with the same FF323-style package, allowing footprint-focused review while still requiring device-level timing, temperature, qualification, and lifecycle verification before substitution.

Alternativas directas para XC5VLX30T-1FF323C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

XC5VLX30T-1FFG323C

✅ Sustitución directa
📦 FCBGA-323
Same 30T Virtex-5 LXT architecture, 2,400 logic cells, 1,098 MHz listed internal frequency, and 323-contact package; FFG323 differs from FF323 in the package ordering code and is identified as lead-free

📋 Alternativa de referencia (no en el catálogo)

XC5VLX30T-2FF323C

✅ Sustitución directa
📦 FCBGA-323
Same 30T architecture and 323-contact package, but changes from the -1 to the -2 performance grade; listed internal frequency remains 1,098 MHz in the comparison listing

📋 Alternativa de referencia (no en el catálogo)

XQ5VLX30T-1FF323I

✅ Sustitución directa
📦 FCBGA-323
Same -1 speed designation and FF323-class package, while the XQ prefix and I suffix distinguish the ordering and temperature/qualification configuration from the commercial XC5VLX30T-1FF323C

📋 Alternativa de referencia (no en el catálogo)

XC5VLX30T-1FF323C Valores máximos y características eléctricas

Device Type Virtex-5 LXT Field Programmable Gate Array (FPGA)
Logic Cells / Logic Blocks 2,400
Listed Resource Count 30,720 cells
Internal Frequency 1,098 MHz
Logic Family CMOS
Package Type FCBGA-323 / FBGA-323
Package Body Size 19 mm × 19 mm
Pin / Ball Count 323
Temperatura de funcionamiento 0°C to +85°C
Architecture Virtex-5 LXT
Device Designation XC5VLX30T
Speed Grade -1
Tipo de montaje Surface Mount
Package Family FCBGA surface-mount package
Programmable Logic Type Field-programmable gate array
Process Technology CMOS

Guía de configuración de pines de XC5VLX30T-1FF323C fcbga surface-mount package

Configuración de pines para XC5VLX30T-1FF323C (encapsulado fcbga surface-mount package). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado fcbga surface-mount package para XC5VLX30T-1FF323C

No hay datos detallados de patillaje disponibles para XC5VLX30T-1FF323C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC5VLX30T-1FF323C es adecuado para 6 aplicacións: Industrial Control and Automation, Data Acquisition and Signal Processing, Communications and Network Interfaces, Test and Measurement Equipment, Embedded Vision and Image Processing, Custom Hardware Acceleration.

🏭

Industrial Control and Automation

XC5VLX30T-1FF323C is suitable for industrial controllers that coordinate sensors, actuators, interlocks, and real-time sequencing in parallel. Its 2,400 listed logic cells allow multiple digital control paths to be consolidated into one programmable device, while the 1,098 MHz listed internal frequency supports demanding logic timing. In a factory system, the FPGA could process position, temperature, and interlock signals, generate machine-control outputs, and implement deterministic communication protocols. The 323-contact FCBGA package provides extensive I/O access, but PCB routing, thermal design, and EMC performance must be validated in the final enclosure.

📊

Data Acquisition and Signal Processing

XC5VLX30T-1FF323C can act as the digital backbone of a data-acquisition subsystem, performing sampling control, filtering, decimation, triggering, and buffer management. The FPGA fabric's 2,400 listed logic cells supports parallel processing of multiple channels, while dedicated storage and programmable I/O can connect converters, memories, and host interfaces. A practical system would configure clocking and I/O standards for each external device, then verify timing against the selected -1 speed grade. System throughput depends on converter latency, memory interface performance, clock quality, and board-level signal integrity rather than the listed internal frequency alone.

🌐

Communications and Network Interfaces

XC5VLX30T-1FF323C is applicable to communication equipment requiring programmable packet handling, framing, channelization, or custom interface conversion. Its parallel FPGA architecture allows data streams to be processed concurrently, reducing dependence on sequential instruction execution. Designers can instantiate fixed and programmable logic for protocol termination, buffers, CRC processing, and test features, then use the extensive package contacts for external PHY or memory connections. Practical deployments must address I/O voltage compatibility, reference-clock jitter, impedance-controlled routing, timing margins, thermal performance, and long-term device lifecycle requirements.

🔧

Test and Measurement Equipment

XC5VLX30T-1FF323C fits programmable test systems that combine pattern generation, measurement sequencing, timing control, and result processing. The 2,400 listed logic cells and 1,098 MHz listed internal frequency allow several instrument functions to run in parallel, while the 323-contact package supports dense connections to converters, memory, and interface circuits. For a bench instrument, the FPGA can execute acquisition sequencing and communicate with a host processor while maintaining deterministic control timing. Engineers should verify acquisition-path bandwidth, clock jitter, I/O standards, ground-plane continuity, and thermal rise under sustained operation.

📷

Embedded Vision and Image Processing

XC5VLX30T-1FF323C can support embedded image-acquisition and preprocessing systems by combining parallel pixel pipelines, thresholding, color conversion, filtering, and interface adaptation. Its programmable architecture allows image-processing operations to be organized as parallel datapaths rather than sequential tasks, while the large FCBGA-323 package offers numerous connections for image sensors, memory, and display or network interfaces. Real-time performance depends on image resolution, pixel format, memory bandwidth, clocking, and selected I/O standards. A complete design should include timing analysis and signal-integrity testing for high-speed sensor and memory connections.

🖥️

Custom Hardware Acceleration

XC5VLX30T-1FF323C is useful for hardware accelerators that implement fixed datapaths or programmable filters alongside a host processor. The FPGA fabric can execute multiple operations concurrently, reducing execution time for suitable workloads and allowing the accelerator interface to be customized. Designers may use dedicated block memory for local buffers and programmable I/O to connect processors, FPGAs, converters, or external memory. The expected speed advantage must be compared against accelerator latency, host-interface overhead, memory bandwidth, and design complexity. Power and thermal analysis should include both static FPGA consumption and activity-dependent dynamic power.

Resumen de productos recomendados

XC5VLX30T-1FFG323C Same-family alternative with FFG323 ordering code Se usa en: Industrial Control and Automation, Data Acquisition and Signal Processing, Communications and Network Interfaces, Test and Measurement Equipment, Embedded Vision and Image Processing, Custom Hardware Acceleration XC5VLX30T-2FF323C Same-package higher speed-grade alternative Se usa en: Industrial Control and Automation, Data Acquisition and Signal Processing, Test and Measurement Equipment, Custom Hardware Acceleration XQ5VLX30T-1FF323I Related same-family ordering candidate Se usa en: Communications and Network Interfaces, Embedded Vision and Image Processing
Where can I buy XC5VLX30T-1FF323C online?
Use the Request a Quote form on this page to request XC5VLX30T-1FF323C sourcing, current availability, and lead time. The device is identified as a Virtex-5 LXT FPGA in a 323-contact FCBGA package, so quotations should specify the exact MPN XC5VLX30T-1FF323C to avoid confusion with the -2 speed grade or the XC5VLX30T-1FFG323C ordering code.
What is the price of XC5VLX30T-1FF323C?
Request current XC5VLX30T-1FF323C pricing through the Request a Quote form on this page. The component is a 2,400-logic-cell Virtex-5 LXT FPGA in an FCBGA-323 package with a listed internal frequency of 1,098 MHz. Because this legacy programmable-logic device may have variable inventory and traceability requirements, the quotation should confirm exact MPN, quantity, condition, and delivery terms.
What is the lead time for XC5VLX30T-1FF323C?
Submit an XC5VLX30T-1FF323C request through the Request a Quote form to obtain the current lead time and minimum-order quantity. The ordering code specifies a commercial-temperature FCBGA-323 device, and availability can vary with lot traceability and exact assembly requirements. Confirm the package suffix, quantity, and shipment destination with the supplier before scheduling production.
Is XC5VLX30T-1FF323C in stock?
Current XC5VLX30T-1FF323C stock status should be confirmed through the Request a Quote form on this page. The exact device is a 30T Virtex-5 LXT FPGA with 2,400 listed logic cells, 323 package contacts, and a 0°C to +85°C operating-temperature range. Provide the required quantity and date so the response can reflect actual procurement availability.
What is the difference between XC5VLX30T-1FF323C and XC5VLX30T-2FF323C?
XC5VLX30T-1FF323C is the -1 speed grade, while XC5VLX30T-2FF323C is the -2 speed grade in the same FF323 package family. Both retain the XC5VLX30T Virtex-5 LXT device designation, but the -2 part is generally selected when a higher performance grade is required. Timing closure, power, availability, and system qualification must be reviewed before substitution.
What is the difference between XC5VLX30T-1FF323C and XC5VLX30T-1FFG323C?
The primary documented ordering difference is the package code: XC5VLX30T-1FF323C uses FF323, while XC5VLX30T-1FFG323C uses FFG323, identified in the cross-reference listing as lead-free. Both use the XC5VLX30T-1 designation and the same listed 2,400 logic cells, 1,098 MHz internal frequency, 19 mm × 19 mm dimensions, and 323-contact package. Verify terminal mapping and PCB compatibility before substitution.
When should I choose XC5VLX30T-1FF323C over XC5VLX30T-2FF323C?
Choose XC5VLX30T-1FF323C when the existing design has closed timing against the -1 speed grade and does not require the higher-performance -2 grade. The -1 part is listed with 2,400 logic cells, 1,098 MHz internal frequency, and a commercial 0°C to +85°C range. Choose the -2 option only after checking worst-case timing, power, thermal behavior, and procurement constraints.
Is XC5VLX30T-1FF323C suitable for industrial control systems?
XC5VLX30T-1FF323C is suitable for many industrial control applications implemented in controlled indoor environments because its listed operating range is 0°C to +85°C. Its FPGA architecture supports parallel control logic, custom I/O, and dedicated storage. Industrial suitability also depends on enclosure temperature, power-supply quality, EMC requirements, long-term availability, and qualification for the complete system.
What can replace XC5VLX30T-1FF323C?
XC5VLX30T-1FFG323C and XC5VLX30T-2FF323C are the closest documented alternatives because they retain the XC5VLX30T architecture and FF323-class package. Neither is automatically interchangeable: the FFG323 part changes the ordering package code, while the -2 part changes the speed grade. Confirm pin mapping, timing, power, temperature, qualification, and lifecycle requirements before replacement.
Is XQ5VLX30T-1FF323I the same as XC5VLX30T-1FF323C?
XQ5VLX30T-1FF323I is not automatically the same device because the XQ ordering prefix and I temperature suffix distinguish it from the commercial XC5VLX30T-1FF323C. It appears in a comparison listing for a similarly packaged device, but the manufacturer ordering guide must establish its lifecycle, qualification, and exact compatibility. Treat it as a candidate requiring validation, not an automatic substitution.
Where can I download the XC5VLX30T-1FF323C datasheet PDF?
The XC5VLX30T-1FF323C datasheet landing page is available through the datasheet link on this page, and the Octopart datasheet result also provides access to the manufacturer document. Use the package drawing and pin-definition sections when planning the FCBGA-323 layout. The 323-contact symbol mapping should be checked directly against the exact ordering code before PCB release.
Where can I find the XC5VLX30T-1FF323C pinout?
Use the package pinout and pin-definition tables in the XC5VLX30T-1FF323C manufacturer documentation to assign all 323 package contacts. The package is identified as FCBGA-323 with a 19 mm × 19 mm body, but no complete public ball-by-ball listing is reproduced here. Use the package drawing and pin table together when defining the land pattern and PCB library symbol.
What are the key specifications of XC5VLX30T-1FF323C that engineers should know?
The key XC5VLX30T-1FF323C specifications are 2,400 listed logic cells, 30,720 listed resource cells, a 1,098 MHz listed internal frequency, CMOS logic technology, and a 323-contact FCBGA package measuring 19 mm × 19 mm. The commercial ordering suffix indicates a 0°C to +85°C operating range. These values define the device class, while final interface rates depend on I/O, timing, and system constraints.
What is the best Xilinx equivalent for XC5VLX30T-1FF323C?
The closest same-family alternatives are XC5VLX30T-1FFG323C, XC5VLX30T-2FF323C, and XQ5VLX30T-1FF323I because their ordering codes indicate closely related Virtex-5 LXT devices in the FF323 package family. Exact interchangeability depends on package-code, speed-grade, temperature-grade, lifecycle, and qualification differences. Review the manufacturer ordering guide before approving any substitution.
How is XC5VLX30T-1FF323C used in a data-acquisition design?
XC5VLX30T-1FF323C can implement parallel sampling control, digital filtering, trigger logic, and data movement in an FPGA-based acquisition system. Its 2,400 listed logic cells provide configurable processing resources, while block RAM and programmable I/O support buffering and external component interfaces. Actual signal integrity and throughput depend on the selected I/O standards, clocking topology, external memory, and PCB implementation.
Can XC5VLX30T-1FF323C be used for networking equipment?
XC5VLX30T-1FF323C can support networking functions such as protocol processing, packet classification, traffic shaping, and custom interface bridges. Parallel programmable logic is useful when deterministic throughput and flexible interfaces matter. The complete design must still meet timing closure, I/O standards, clock-jitter, power, thermal, and EMC requirements, and its lifecycle status must be evaluated for the product's deployment period.

Datos de referencia de ingeniería para XC5VLX30T-1FF323C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose XC5VLX30T-1FF323C when an existing design is tied to the exact FF323 ordering code, the -1 speed grade, and the commercial 0°C to +85°C temperature range. Select XC5VLX30T-1FFG323C only when its FFG323 package and lead-free assembly characteristics meet the product requirements; its logical architecture is closely aligned, but the ordering code still requires verification. Select XC5VLX30T-2FF323C when timing closure benefits from the higher -2 performance grade and the design has been revalidated for timing, power, thermal behavior, and supply availability. Consider XQ5VLX30T-1FF323I only after its temperature, qualification, lifecycle, and package details are confirmed. Because all candidates are legacy programmable-logic devices, procurement continuity and traceability should be evaluated alongside electrical compatibility.

Comparación con alternativas

Parámetro Este producto XC5VLX30T-1FFG323C XC5VLX30T-2FF323C XQ5VLX30T-1FF323I
Brand Xilinx Xilinx Xilinx Xilinx
Package FCBGA-323, 19 mm × 19 mm FCBGA-323, 19 mm × 19 mm FCBGA-323, 19 mm × 19 mm FCBGA-323, 19 mm × 19 mm
Device Family Virtex-5 LXT Virtex-5 LXT Virtex-5 LXT Virtex-5 LXT
Speed Grade -1 -1 -2 -1
Logic Technology CMOS CMOS CMOS CMOS

Diferenciadores clave

  • Commercial-temperature -1 device in the established FF323 package (frente a XQ5VLX30T-1FF323I)
  • Lower speed grade supports designs already closed against -1 timing (frente a XC5VLX30T-2FF323C)
  • Direct FF323 ordering code for an existing FF323 design (frente a XC5VLX30T-1FFG323C)

Notas de diseño

Build the FCBGA-323 land pattern directly from the exact package drawing rather than scaling a generic BGA footprint. Confirm ball-pitch dimensions, ball-map orientation, pad diameter, solder-mask definition, and paste stencil recommendations. With 323 contacts and potentially high-speed routes, use the manufacturer-recommended multilayer stackup and preserve continuous ground planes under the device to control return paths and reduce crosstalk.

Partition the power architecture according to the device's voltage requirements and I/O groups. Place decoupling capacitance at the appropriate supply and ground balls with short, low-inductance connections, and verify the design against the manufacturer's recommended capacitor values and placement. Separate core and I/O supplies where required, establish correct sequencing, and test both steady-state and transient loading so rail overshoot does not compromise the configured FPGA.

Route clocks as controlled-impedance differential or source-synchronous interfaces using the I/O standards selected for each bank. Avoid routing high-speed signals across split power or ground planes, and minimize stubs and unnecessary vias. Validate timing with accurate clock and I/O models, then measure eye diagrams, jitter, and crosstalk on the assembled board. The listed 1,098 MHz internal frequency is not a guarantee of compliant external interface rates.

Estimate the FPGA's junction temperature from total power, package thermal characteristics, ambient temperature, and PCB copper spreading. Estimate: Pdevice = VCC × ICC across operating states; Trise = Pdevice × effective board-to-ambient thermal resistance. Compare the resulting junction temperature with the device limit and add thermal vias, copper areas, airflow, or heat-spreading hardware when the margin is inadequate. Review the configuration because FPGA power can vary significantly with logic activity.

Do not treat FFG323 and FF323 ordering codes as interchangeable without checking the package marking, terminal definition, and lead-free assembly requirements. Likewise, the -1 and -2 suffixes are not equal performance grades, and the XQ prefix may carry different qualification or lifecycle conditions. Before releasing a replacement, compare the ordering guide, pinout, speed grade, temperature range, PCB compatibility, timing reports, and qualification status.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status was not explicitly established for the exact FF323 ordering code. The alternative XC5VLX30T-1FFG323C is identified as lead-free in a cross-reference listing, but that statement does not establish the compliance status of XC5VLX30T-1FF323C.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

XC5VLX30T-1FF323C datasheet XC5VLX30T-1FF323C pinout XC5VLX30T-1FF323C datasheet pdf XC5VLX30T-1FF323C specifications XC5VLX30T-1FF323C replacement XC5VLX30T-1FF323C equivalent XC5VLX30T-1FF323C cross reference XC5VLX30T-1FF323C vs XC5VLX30T-2FF323C Xilinx XC5VLX30T-1FF323C XC5VLX30T-1FF323C FCBGA-323 XC5VLX30T-1FF323C price XC5VLX30T-1FF323C stock

Componentes & términos relacionados

Xilinx AMD Xilinx XC5VLX30T-1FF323C XC5VLX30T-1FFG323C XC5VLX30T-2FF323C XQ5VLX30T-1FF323I Virtex-5 LXT Field Programmable Gate Array FPGA Programmable Logic Device Configurable Logic Block Block RAM Programmable Interconnect FCBGA-323 FBGA-323 BGA package family Surface Mount CMOS Internal Frequency Speed Grade Industrial Control Data Acquisition Signal Processing Communications Equipment Hardware Acceleration
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ