XC5VLX30T-1FF323C - 30T Virtex-5 LXT FPGA | Xilinx
MPN: XC5VLX30T-1FF323C ✗ پایان تولیدXC5VLX30T-1FF323C نمای کلی
A field-programmable gate array is a semiconductor whose digital logic can be configured after manufacture. An FPGA sits within the broader programmable-logic hierarchy, alongside complex programmable logic devices and programmable system-on-chip devices. Its architecture combines configurable logic blocks, programmable interconnect, block RAM, dedicated arithmetic and I/O resources. This makes the Virtex-5 LXT family useful where product requirements evolve faster than application-specific ASIC development cycles permit.
The XC5VLX30T-1FF323C combines a 30T-class Virtex-5 LXT configuration with 2,400 listed logic cells and 1,098 MHz listed internal frequency. Its 30720-cell resource figure is associated with the Virtex-5 LXT architecture, while the package exposes 323 contacts in a 19 mm × 19 mm footprint. The -1 suffix identifies the performance grade, while FF323C identifies the FCBGA package and commercial-temperature ordering code.
The FPGA architecture allows parallel datapaths to be implemented instead of relying on sequential microcontroller execution. Dedicated block RAM supports buffering and data storage, programmable I/O can interface with external logic, and the configurable interconnect routes signals among fabric resources. Because the listed internal frequency describes a device capability rather than the final system operating rate, designers must evaluate external memory interfaces, I/O standards, timing constraints, clocking, and board-level signal integrity in the target design.
XC5VLX30T-1FF323C is suitable for industrial control, networking, signal processing, test equipment, communications, embedded vision, and high-speed data-acquisition systems. The commercial temperature range supports equipment deployed in controlled indoor environments, while the large FCBGA-323 package provides extensive physical connectivity for high-pin-count designs. The device can also support prototype development, hardware acceleration, and custom interface logic.
PCB implementation requires careful treatment of the FCBGA-323 footprint, multilayer escape routing, power and ground distribution, and high-speed clock integrity. Designers should use the package drawing, pinout, and recommended PCB stackup in the manufacturer documentation. Thermal performance, power sequencing, configuration memories, decoupling, and I/O voltage compatibility must be addressed before schematic and layout signoff.
This page consolidates device specifications, compatible ordering alternatives, application guidance, and engineering design considerations for engineers evaluating the XC5VLX30T-1FF323C Virtex-5 LXT FPGA. The alternatives are restricted to candidates with the same FF323-style package, allowing footprint-focused review while still requiring device-level timing, temperature, qualification, and lifecycle verification before substitution.
جایگزینهای drop-in برای XC5VLX30T-1FF323C — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
XC5VLX30T-1FFG323C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC5VLX30T-2FF323C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XQ5VLX30T-1FF323I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC5VLX30T-1FF323C حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Virtex-5 LXT Field Programmable Gate Array (FPGA) |
| Logic Cells / Logic Blocks | 2,400 |
| Listed Resource Count | 30,720 cells |
| Internal Frequency | 1,098 MHz |
| Logic Family | CMOS |
| Package Type | FCBGA-323 / FBGA-323 |
| Package Body Size | 19 mm × 19 mm |
| Pin / Ball Count | 323 |
| دمای کاری | 0°C to +85°C |
| Architecture | Virtex-5 LXT |
| Device Designation | XC5VLX30T |
| Speed Grade | -1 |
| نوع نصب | Surface Mount |
| Package Family | FCBGA surface-mount package |
| Programmable Logic Type | Field-programmable gate array |
| Process Technology | CMOS |
راهنمای پیکربندی پین XC5VLX30T-1FF323C fcbga surface-mount package
پیکربندی پین برای XC5VLX30T-1FF323C (پکیج fcbga surface-mount package). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC5VLX30T-1FF323C.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC5VLX30T-1FF323C مناسب است برای 6 کاربردs: Industrial Control and Automation, Data Acquisition and Signal Processing, Communications and Network Interfaces, Test and Measurement Equipment, Embedded Vision and Image Processing, Custom Hardware Acceleration.
Industrial Control and Automation
XC5VLX30T-1FF323C is suitable for industrial controllers that coordinate sensors, actuators, interlocks, and real-time sequencing in parallel. Its 2,400 listed logic cells allow multiple digital control paths to be consolidated into one programmable device, while the 1,098 MHz listed internal frequency supports demanding logic timing. In a factory system, the FPGA could process position, temperature, and interlock signals, generate machine-control outputs, and implement deterministic communication protocols. The 323-contact FCBGA package provides extensive I/O access, but PCB routing, thermal design, and EMC performance must be validated in the final enclosure.
پیشنهادی
Data Acquisition and Signal Processing
XC5VLX30T-1FF323C can act as the digital backbone of a data-acquisition subsystem, performing sampling control, filtering, decimation, triggering, and buffer management. The FPGA fabric's 2,400 listed logic cells supports parallel processing of multiple channels, while dedicated storage and programmable I/O can connect converters, memories, and host interfaces. A practical system would configure clocking and I/O standards for each external device, then verify timing against the selected -1 speed grade. System throughput depends on converter latency, memory interface performance, clock quality, and board-level signal integrity rather than the listed internal frequency alone.
پیشنهادی
Communications and Network Interfaces
XC5VLX30T-1FF323C is applicable to communication equipment requiring programmable packet handling, framing, channelization, or custom interface conversion. Its parallel FPGA architecture allows data streams to be processed concurrently, reducing dependence on sequential instruction execution. Designers can instantiate fixed and programmable logic for protocol termination, buffers, CRC processing, and test features, then use the extensive package contacts for external PHY or memory connections. Practical deployments must address I/O voltage compatibility, reference-clock jitter, impedance-controlled routing, timing margins, thermal performance, and long-term device lifecycle requirements.
پیشنهادی
Test and Measurement Equipment
XC5VLX30T-1FF323C fits programmable test systems that combine pattern generation, measurement sequencing, timing control, and result processing. The 2,400 listed logic cells and 1,098 MHz listed internal frequency allow several instrument functions to run in parallel, while the 323-contact package supports dense connections to converters, memory, and interface circuits. For a bench instrument, the FPGA can execute acquisition sequencing and communicate with a host processor while maintaining deterministic control timing. Engineers should verify acquisition-path bandwidth, clock jitter, I/O standards, ground-plane continuity, and thermal rise under sustained operation.
پیشنهادی
Embedded Vision and Image Processing
XC5VLX30T-1FF323C can support embedded image-acquisition and preprocessing systems by combining parallel pixel pipelines, thresholding, color conversion, filtering, and interface adaptation. Its programmable architecture allows image-processing operations to be organized as parallel datapaths rather than sequential tasks, while the large FCBGA-323 package offers numerous connections for image sensors, memory, and display or network interfaces. Real-time performance depends on image resolution, pixel format, memory bandwidth, clocking, and selected I/O standards. A complete design should include timing analysis and signal-integrity testing for high-speed sensor and memory connections.
پیشنهادی
Custom Hardware Acceleration
XC5VLX30T-1FF323C is useful for hardware accelerators that implement fixed datapaths or programmable filters alongside a host processor. The FPGA fabric can execute multiple operations concurrently, reducing execution time for suitable workloads and allowing the accelerator interface to be customized. Designers may use dedicated block memory for local buffers and programmable I/O to connect processors, FPGAs, converters, or external memory. The expected speed advantage must be compared against accelerator latency, host-interface overhead, memory bandwidth, and design complexity. Power and thermal analysis should include both static FPGA consumption and activity-dependent dynamic power.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC5VLX30T-1FF323C — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC5VLX30T-1FFG323C | XC5VLX30T-2FF323C | XQ5VLX30T-1FF323I |
|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm |
| Device Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Speed Grade | -1 | -1 | -2 | -1 |
| Logic Technology | CMOS | CMOS | CMOS | CMOS |
تفاوتهای کلیدی
- Commercial-temperature -1 device in the established FF323 package (در مقابلXQ5VLX30T-1FF323I)
- Lower speed grade supports designs already closed against -1 timing (در مقابلXC5VLX30T-2FF323C)
- Direct FF323 ordering code for an existing FF323 design (در مقابلXC5VLX30T-1FFG323C)
یادداشتهای طراحی
Build the FCBGA-323 land pattern directly from the exact package drawing rather than scaling a generic BGA footprint. Confirm ball-pitch dimensions, ball-map orientation, pad diameter, solder-mask definition, and paste stencil recommendations. With 323 contacts and potentially high-speed routes, use the manufacturer-recommended multilayer stackup and preserve continuous ground planes under the device to control return paths and reduce crosstalk.
Partition the power architecture according to the device's voltage requirements and I/O groups. Place decoupling capacitance at the appropriate supply and ground balls with short, low-inductance connections, and verify the design against the manufacturer's recommended capacitor values and placement. Separate core and I/O supplies where required, establish correct sequencing, and test both steady-state and transient loading so rail overshoot does not compromise the configured FPGA.
Route clocks as controlled-impedance differential or source-synchronous interfaces using the I/O standards selected for each bank. Avoid routing high-speed signals across split power or ground planes, and minimize stubs and unnecessary vias. Validate timing with accurate clock and I/O models, then measure eye diagrams, jitter, and crosstalk on the assembled board. The listed 1,098 MHz internal frequency is not a guarantee of compliant external interface rates.
Estimate the FPGA's junction temperature from total power, package thermal characteristics, ambient temperature, and PCB copper spreading. Estimate: Pdevice = VCC × ICC across operating states; Trise = Pdevice × effective board-to-ambient thermal resistance. Compare the resulting junction temperature with the device limit and add thermal vias, copper areas, airflow, or heat-spreading hardware when the margin is inadequate. Review the configuration because FPGA power can vary significantly with logic activity.
Do not treat FFG323 and FF323 ordering codes as interchangeable without checking the package marking, terminal definition, and lead-free assembly requirements. Likewise, the -1 and -2 suffixes are not equal performance grades, and the XQ prefix may carry different qualification or lifecycle conditions. Before releasing a replacement, compare the ordering guide, pinout, speed grade, temperature range, PCB compatibility, timing reports, and qualification status.
اطلاعات انطباق
Compliance status was not explicitly established for the exact FF323 ordering code. The alternative XC5VLX30T-1FFG323C is identified as lead-free in a cross-reference listing, but that statement does not establish the compliance status of XC5VLX30T-1FF323C.