AMD

XC5VSX50T-2FFG665C - 52,224-Cell SXT FPGA | AMD | FFG665

N.º de pieza: XC5VSX50T-2FFG665C ✗ Fin de vida
1 V Vdss 665-pin FCBGA (FFG665) Package Grade 2 Speed
MOQ: 1 |

XC5VSX50T-2FFG665C Descripción general

AMD XC5VSX50T-2FFG665C is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 65 nm CMOS technology, and a 665-pin FCBGA package. The device is offered in speed grade 2 for commercial-temperature applications and uses a 1 V supply. Its 360 inputs and 360 outputs support parallel connectivity for high-speed digital processing, programmable logic, interface bridging, and embedded system control.

An FPGA is a reconfigurable semiconductor in which programmable logic blocks, I/O resources, memory, and dedicated circuitry are combined on one device. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic and CPLD family, but differs from simpler CPLDs through substantially greater logic density, dedicated block resources, high-speed I/O, and support for advanced clocking, serial connectivity, and processor-based architectures.

The XC5VSX50T-2FFG665C combines 52,224 programmable logic cells with 65 nm CMOS process technology. Speed grade 2 identifies its performance class within the Virtex-5 SXT family. The 360 dedicated input and 360 output locations provide substantial board-level connectivity, while the FFG665 package supports dense designs requiring many power, ground, configuration, and signal pins. The manufacturer specifies a nominal 1 V operating supply for this device family.

Virtex-5 SXT devices are designed for DSP, high-performance parallel processing, communications, networking, industrial control, and test equipment. Their large fabric supports concurrent datapaths, buffering, protocol handling, and control logic, while dedicated resources can accelerate suitable operations without moving every function into general-purpose logic. Actual implementation timing, power, and resource utilization depend on the selected clocking scheme, I/O standards, logic mapping, and final bitstream.

Because the FFG665 package has 665 balls and only a manufacturer package-pinout resource is identified, board designers should use the AMD package files for authoritative signal assignment. Decoupling, power-plane segmentation, clock routing, and high-speed interface layout should follow the applicable Virtex-5 power, connectivity, and design-guideline documents rather than generic BGA practices.

This page organizes the confirmed device identity, package, logic density, I/O count, process technology, supply information, sourcing paths, and same-family alternatives into an engineer-oriented reference. It also identifies the limits of available information: detailed pin naming, performance tables, package dimensions, and full compliance status should be confirmed in the current AMD package files and manufacturer documentation before release to production.

Alternativas directas para XC5VSX50T-2FFG665C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con XC5VSX50T-2FFG665C (mismo factor de forma y huella) — difiere en Package, Device Type, Speed Grade, Programmable Logic, Process Technology.

AMD
Package: 665-ball FCBGA, 27 mm x 27 mm
Device Type: Virtex-5 SXT FPGA
Speed Grade: -1
Comparar con XC5VSX50T-2FFG665C →
AMD
Package: 665-ball FCBGA
Programmable Logic: FPGA
Process Technology: CMOS
Comparar con XC5VSX50T-2FFG665C →
AMD
Package: 665-FCBGA, 27 x 27 mm
Device Type: Virtex-5 SXT field-programmable gate array
Comparar con XC5VSX50T-2FFG665C →
AMD
Device Type: Virtex-5 SXT FPGA
Speed Grade: -3
Comparar con XC5VSX50T-2FFG665C →

XC5VSX50T-1FFG665C

✅ Sustitución directa
AMD
📦 665-pin FCBGA (FFG665)
Virtex-5 SXT Field Programmable Gate Array (FPGA) · 52,224 cells · 4,080 LABs · 360 I/O · 360 inputs · 360 outputs · 50,000 gates · 1.05 V

Consulte el precio

Ver hoja de datos →

XC5VSX50T-2FFG665I

✅ Sustitución directa
AMD
📦 665-pin FCBGA (FFG665)
Virtex-5 SXT field-programmable gate array · 52,224 logic elements · 4,080 LABs/CLBs · 288 slices · 1,728 Kb · 4,866,048 bits · 360 pins · 480 pins

Consulte el precio

Ver hoja de datos →

XC5VSX50T-3FFG665C

✅ Sustitución directa ⚠️ Especificaciones sin verificar
AMD
📦 665-pin FCBGA (FFG665)
Virtex-5 SXT FPGA · 52,224 cells · 360 I/O · 65 nm CMOS · 1 V · 0.95 V to 1.05 V · -3 · 0 °C to 85 °C

Consulte el precio

Ver hoja de datos →

XC5VSX50T-2FFG665C Valores máximos y características eléctricas

Device Type Virtex-5 SXT Field Programmable Gate Array (FPGA)
Logic Cells 52,224 cells
FPGA Family Virtex-5 SXT
Process Technology 65 nm CMOS
Speed Grade Grade 2
Temperature Grade Commercial
Nominal Supply Voltage 1 V
Input Count 360 inputs
Output Count 360 outputs
Encapsulado 665-pin FCBGA (FFG665)
Package Type Flip-chip ball grid array
Programmable Logic 52,224 logic cells
Manufacturer AMD / Xilinx

Guía de configuración de pines de XC5VSX50T-2FFG665C flip-chip ball grid array

Configuración de pines para XC5VSX50T-2FFG665C (encapsulado flip-chip ball grid array). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado flip-chip ball grid array para XC5VSX50T-2FFG665C

No hay datos detallados de patillaje disponibles para XC5VSX50T-2FFG665C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC5VSX50T-2FFG665C es adecuado para 6 aplicacións: Parallel DSP Processing, Communications Line Card, Industrial Control System, Network Packet Processing, Video Image Processing, Test and Measurement Equipment.

⚡

Parallel DSP Processing

The XC5VSX50T-2FFG665C is appropriate for parallel DSP pipelines that require substantial programmable logic and a large number of parallel data connections. Its 52,224 logic cells can accommodate filtering, correlation, FFT-related control, data movement, and interface adaptation when the design fits the available fabric and dedicated resources. The 360 inputs and 360 outputs provide substantial board-level parallelism, while the 1 V family supply supports integration with the power architecture of the FFG665 package. Design engineers should partition the pipeline into independently timed stages, use registered boundaries where appropriate, and confirm timing closure against the selected speed grade before hardware release.

🌐

Communications Line Card

The XC5VSX50T-2FFG665C can implement a communications line card combining parallel data paths, packet control, clocking logic, and external interfaces. With 52,224 logic cells and 360 I/O locations, it offers enough parallelism for multi-lane routing and protocol support without relying solely on hard processors. A line-card implementation should reserve pins for clock references, management interfaces, status signals, and high-speed data according to the FFG665 package files. Because exact interface standards and supported I/O performance are design-dependent, engineers must consult the complete manufacturer tables before selecting voltage standards or timing constraints.

🏭

Industrial Control System

XC5VSX50T-2FFG665C suits industrial control systems requiring deterministic programmable logic, parallel machine interfaces, and centralized sequencing. The 52,224-cell fabric can host motion-control state machines, I/O mapping, safety-adjacent monitoring logic, and communications gateways when utilization is checked during implementation. For deployment near heat-producing equipment, thermal design must account for the selected commercial temperature grade rather than assuming the industrial suffix. Use the FFG665 package assignments to plan supply distribution, and validate all timing constraints against the speed-grade-2 operating conditions before manufacturing the controller.

🌐

Network Packet Processing

The XC5VSX50T-2FFG665C can support network packet processing functions such as header classification, queue control, traffic shaping, and protocol adaptation. Its 52,224 logic cells and 360 inputs and outputs allow multiple parallel datapaths to coexist, which is useful when traffic handling must be distributed across programmable pipelines. A practical implementation should separate high-speed data pins from management and debug signals, then apply source-synchronous constraints where applicable. Validate the achievable interface rates against the manufacturer I/O tables rather than deriving them from the general device description.

📺

Video Image Processing

XC5VSX50T-2FFG665C can be evaluated for pixel-pipeline and image-processing systems that fit within 52,224 logic cells and the available I/O resources. Parallel color channels, horizontal and vertical counters, frame buffers, and preprocessing stages can be distributed across the fabric. The device's 360 inputs and 360 outputs provide substantial connectivity for source and sink interfaces, while speed grade 2 supports the timing class of the original configuration. Engineers should verify memory resources, clock domains, and target video standards against the complete device tables before treating the FPGA as a suitable platform.

🔧

Test and Measurement Equipment

The XC5VSX50T-2FFG665C is applicable to programmable test systems that need parallel stimulus generation, timing control, capture logic, and communication with an instrument controller. Its large programmable fabric can combine multiple test channels and control functions, while 360 I/O locations support substantial board connectivity. In an instrumentation design, isolate sensitive analog sections from digital activity, maintain controlled clock distribution, and use the manufacturer pinout files to establish every power and ground connection. Final channel count, operating rates, and synchronization architecture remain functions of the selected I/O standards and board-level implementation.

What is AMD XC5VSX50T-2FFG665C?
AMD XC5VSX50T-2FFG665C is a Virtex-5 SXT FPGA with 52,224 logic cells, 360 inputs, 360 outputs, and a 665-pin FCBGA package. According to the AMD package information and product listings, it is manufactured using 65 nm CMOS technology and operates from a nominal 1 V supply. The device is intended for programmable digital logic, DSP, communications, and embedded processing systems.
What are the key specifications of XC5VSX50T-2FFG665C?
The XC5VSX50T-2FFG665C provides 52,224 logic cells, 360 inputs, 360 outputs, 65 nm CMOS technology, and a 1 V nominal supply. According to the manufacturer datasheet information identified for this device, it is a Virtex-5 SXT FPGA in the FFG665 flip-chip BGA package. Its speed grade is 2, and its temperature grade is commercial.
Where can I download the XC5VSX50T-2FFG665C pinout and package files?
The authoritative package information is available through AMD's Virtex-5 package device pinout files page. AMD identifies those files as ASCII text resources for the relevant package. Use the FFG665 package file to assign ball locations and verify PCB land patterns, power rails, grounds, configuration pins, and user I/O before releasing the board layout.
Can XC5VSX50T-1FFG665C replace XC5VSX50T-2FFG665C?
XC5VSX50T-1FFG665C is the closest same-family candidate because it uses the same FFG665 package and base device, but it has speed grade 1 rather than speed grade 2. It can be considered for a pin-compatible redesign only after timing closure, power review, and bitstream compatibility checks. The lower performance grade may change achievable clock and timing margins, so it is not automatically interchangeable in every design.
What is the best drop-in replacement for XC5VSX50T-2FFG665C?
No exact drop-in replacement with verified equivalent timing, temperature, and package characteristics is identified. XC5VSX50T-1FFG665C is the closest same-package same-family candidate, while XC5VSX50T-2FFG665I changes the temperature-grade suffix and therefore requires qualification before substitution. Request a quote on this page for the exact MPN, and obtain written engineering approval for any alternate device.
Where to buy XC5VSX50T-2FFG665C online?
Use the Request a Quote form on this page to request AMD XC5VSX50T-2FFG665C availability, current lead time, and lot-related details. The exact part is identified as a Virtex-5 SXT FPGA in FFG665 packaging with speed grade 2 and a commercial temperature grade. Because this is a mature FPGA family, request written confirmation of device condition, traceability, and configuration support.
What is the price of XC5VSX50T-2FFG665C?
Current pricing for the exact XC5VSX50T-2FFG665C should be obtained through the Request a Quote form on this page. The form is the proper route for a formal quotation because FPGA pricing can depend on quantity, lot status, date code, and supply condition. The product is a 52,224-cell Virtex-5 SXT device in a 665-pin FCBGA package.
What is the lead time for XC5VSX50T-2FFG665C?
The current lead time for XC5VSX50T-2FFG665C should be requested through the Request a Quote form on this page. A confirmed delivery date should cover the exact MPN, package suffix, quantity, and shipping destination. For a mature Virtex-5 SXT FPGA, also request the date code, traceability documentation, and notification of any device or lot change.
Is XC5VSX50T-2FFG665C in stock?
Stock for XC5VSX50T-2FFG665C should be confirmed through the Request a Quote form on this page. One current listing identifies the exact MPN as in stock, but inventory can change rapidly and should not be treated as a guaranteed allocation. For production use, request a quantity-specific availability statement and written confirmation of the lot and date code.
XC5VSX50T-2FFG665C vs XC5VSX50T-1FFG665C: which is better?
XC5VSX50T-2FFG665C is preferable when the original design relies on speed-grade-2 timing performance. XC5VSX50T-1FFG665C retains the same base device and FFG665 package but uses speed grade 1, so it may provide less timing margin. Choose the grade-2 device when timing closure cannot be repeated; consider grade 1 only after recompilation and timing analysis.
What is the difference between XC5VSX50T-2FFG665C and XC5VSX50T-2FFG665I?
The primary documented distinction is the temperature-grade suffix: XC5VSX50T-2FFG665C is commercial, while XC5VSX50T-2FFG665I represents the industrial-temperature option listed under the same FFG665 package and speed grade 2. They should not be treated as unconditional substitutes because the junction-temperature operating range differs; industrial qualification is required for harsh environments.
When should I choose XC5VSX50T-2FFG665C over a different FPGA?
Choose XC5VSX50T-2FFG665C when an existing Virtex-5 SXT design benefits from a large 52,224-cell programmable fabric, 360 inputs, 360 outputs, and the established FFG665 board footprint. It is especially relevant for incremental upgrades that avoid PCB respin. A newer FPGA is preferable for a fresh design when software migration, power reduction, tool support, or long-term availability outweigh reuse.
Is XC5VSX50T-2FFG665C suitable for DSP and communications applications?
Yes, XC5VSX50T-2FFG665C is suitable for DSP and communications designs that fit within its 52,224 logic cells and 360-I/O capability. Its Virtex-5 SXT architecture supports parallel logic and dedicated high-speed implementation. Actual throughput depends on the selected resources, clocking, I/O standards, memory usage, timing closure, and end-to-end design constraints.
Can Intel Altera Stratix III EP3SL50 replace XC5VSX50T-2FFG665C?
EP3SL50 should not be treated as a direct drop-in replacement for XC5VSX50T-2FFG665C. Cross-brand listings may describe it as functionally equivalent, but it uses a different device architecture, package, tool flow, and configuration system. A design migration would require a new PCB, HDL and constraint changes, timing closure, and system validation rather than a simple component substitution.
How should power and decoupling be designed for XC5VSX50T-2FFG665C?
Power and decoupling for XC5VSX50T-2FFG665C should follow the manufacturer guidance for the selected Virtex-5 SXT power rails and FFG665 package. Place decoupling components close to the relevant supply and ground balls, provide low-impedance planes, and separate sensitive supplies where the architecture requires it. Do not infer voltage, current, or capacitor values from the nominal 1 V family specification without consulting the complete power guidelines.

Datos de referencia de ingeniería para XC5VSX50T-2FFG665C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose XC5VSX50T-2FFG665C when maintaining an existing Virtex-5 SXT design requires the original speed grade 2 and commercial temperature grade in the FFG665 package. Its 52,224 logic cells and 360 inputs and outputs make it appropriate for parallel DSP, communications, test, and control systems that fit the established design. Select XC5VSX50T-1FFG665C only when a lower speed grade is acceptable and timing closure can be repeated; select XC5VSX50T-2FFG665I when industrial-temperature qualification is required. XC5VSX50T-3FFG665C can suit a design seeking a higher speed grade, but it is not a drop-in replacement in the strict ordering sense. For any substitution, verify the package files, timing constraints, bitstream, environmental requirements, and supply traceability.

Comparación con alternativas

Parámetro Este producto XC5VSX50T-1FFG665C XC5VSX50T-2FFG665I XC5VSX50T-3FFG665C
Brand AMD AMD AMD AMD
Package 665-pin FCBGA (FFG665) 665-pin FCBGA (FFG665) - same package 665-pin FCBGA (FFG665) - same package 665-pin FCBGA (FFG665) - same package
FPGA Family Virtex-5 SXT Virtex-5 SXT Virtex-5 SXT Virtex-5 SXT
Speed Grade Grade 2 Grade 1 - one performance grade lower Grade 2 - same Grade 3 - one performance grade higher
Temperature Grade Commercial Commercial Industrial Commercial
Logic Cells 52,224 cells 52,224 cells 52,224 cells 52,224 cells
Process Technology 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS
Nominal Supply Voltage 1 V 1 V 1 V 1 V
Input Count 360 inputs 360 inputs 360 inputs 360 inputs
Output Count 360 outputs 360 outputs 360 outputs 360 outputs

Diferenciadores clave

  • Retains the exact speed-grade-2 performance class while supporting an industrial-temperature configuration (frente a XC5VSX50T-2FFG665I)
  • Provides one higher performance grade than the grade-1 alternative (frente a XC5VSX50T-1FFG665C)
  • Avoids the performance increase and associated qualification burden of grade 3 (frente a XC5VSX50T-3FFG665C)

Notas de diseño

Use the AMD Virtex-5 FFG665 package files as the authoritative source for ball assignments and PCB land patterns. The 665-ball FCBGA requires dense escape routing, numerous supply connections, and careful plane management. Place decoupling components close to the associated supply and ground balls, preserve short return paths, and confirm every ball against the selected device suffix before fabrication release.

The nominal 1 V family supply is not a complete board power specification. Obtain the detailed Virtex-5 SXT power-rail requirements, current limits, sequencing rules, and decoupling recommendations from AMD. Separate the required supplies, provide low-impedance distribution, and design for the speed-grade and temperature-grade combination used in production. Do not determine rail current from the logic-cell count alone.

Assign clock-capable pins and high-speed interfaces from the manufacturer tables rather than assuming that any adjacent balls are interchangeable. Route clocks over controlled impedance paths, provide return paths beneath signal lanes, and keep configuration and programming access clear for manufacturing and field updates. Perform signal-integrity and simultaneous-switching-noise analysis with the final stack-up and package model.

Do not treat XC5VSX50T-1FFG665C, XC5VSX50T-2FFG665I, or XC5VSX50T-3FFG665C as unconditional replacements. A speed-grade change alters timing margins, while the I suffix changes the environmental qualification. Rebuild the bitstream, repeat timing closure, and confirm the exact mechanical package and ordering code before approving any substitution.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

A separate listing characterizes XC5VSX50T-2FFG665I as the lead-free variant, but the specific RoHS, REACH, lead-free, and halogen-free status of XC5VSX50T-2FFG665C is not established. The commercial FPGA is not presented as an AEC-Q100-qualified automotive device.

Búsquedas relacionadas

xc5vsx50t 2ffg1136c XC5VSX50T-2FFG665C datasheet XC5VSX50T-2FFG665C pinout XC5VSX50T-2FFG665C specifications AMD XC5VSX50T-2FFG665C XC5VSX50T-2FFG665C FFG665 package XC5VSX50T-2FFG665C price XC5VSX50T-2FFG665C stock XC5VSX50T-2FFG665C equivalent XC5VSX50T-2FFG665C replacement XC5VSX50T-2FFG665C vs XC5VSX50T-1FFG665C Virtex-5 SXT 52224 logic cells FPGA XC5VSX50T-2FFG665C DSP application XC5VSX50T-2FFG665C communications design where to buy XC5VSX50T-2FFG665C

Componentes & términos relacionados

AMD Xilinx XC5VSX50T-2FFG665C XC5VSX50T-1FFG665C XC5VSX50T-2FFG665I XC5VSX50T-3FFG665C Virtex-5 Virtex-5 SXT FPGA field-programmable gate array programmable logic CPLD semiconductor 52,224 logic cells 65 nm CMOS 360 inputs 360 outputs 1 V supply speed grade 2 commercial temperature grade FFG665 665-pin FCBGA flip-chip ball grid array DSP communications line card
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ