XC5VSX50T-2FFG665C - 52,224-Cell SXT FPGA | AMD | FFG665
MPN: XC5VSX50T-2FFG665C ✗ Tapus ng BuhayXC5VSX50T-2FFG665C Ulas
An FPGA is a reconfigurable semiconductor in which programmable logic blocks, I/O resources, memory, and dedicated circuitry are combined on one device. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic and CPLD family, but differs from simpler CPLDs through substantially greater logic density, dedicated block resources, high-speed I/O, and support for advanced clocking, serial connectivity, and processor-based architectures.
The XC5VSX50T-2FFG665C combines 52,224 programmable logic cells with 65 nm CMOS process technology. Speed grade 2 identifies its performance class within the Virtex-5 SXT family. The 360 dedicated input and 360 output locations provide substantial board-level connectivity, while the FFG665 package supports dense designs requiring many power, ground, configuration, and signal pins. The manufacturer specifies a nominal 1 V operating supply for this device family.
Virtex-5 SXT devices are designed for DSP, high-performance parallel processing, communications, networking, industrial control, and test equipment. Their large fabric supports concurrent datapaths, buffering, protocol handling, and control logic, while dedicated resources can accelerate suitable operations without moving every function into general-purpose logic. Actual implementation timing, power, and resource utilization depend on the selected clocking scheme, I/O standards, logic mapping, and final bitstream.
Because the FFG665 package has 665 balls and only a manufacturer package-pinout resource is identified, board designers should use the AMD package files for authoritative signal assignment. Decoupling, power-plane segmentation, clock routing, and high-speed interface layout should follow the applicable Virtex-5 power, connectivity, and design-guideline documents rather than generic BGA practices.
This page organizes the confirmed device identity, package, logic density, I/O count, process technology, supply information, sourcing paths, and same-family alternatives into an engineer-oriented reference. It also identifies the limits of available information: detailed pin naming, performance tables, package dimensions, and full compliance status should be confirmed in the current AMD package files and manufacturer documentation before release to production.
Mga alternatibo na pwedeng ilagay na XC5VSX50T-2FFG665C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC5VSX50T-2FFG665C (parehas na form factor at footprint) — pagkakaiba sa Package, Device Type, Speed Grade, Programmable Logic, Process Technology.
XC5VSX50T-1FFG665C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC5VSX50T-2FFG665I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC5VSX50T-3FFG665C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC5VSX50T-2FFG665C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Virtex-5 SXT Field Programmable Gate Array (FPGA) |
| Logic Cells | 52,224 cells |
| FPGA Family | Virtex-5 SXT |
| Process Technology | 65 nm CMOS |
| Speed Grade | Grade 2 |
| Temperature Grade | Commercial |
| Nominal Supply Voltage | 1 V |
| Input Count | 360 inputs |
| Output Count | 360 outputs |
| Packhaging | 665-pin FCBGA (FFG665) |
| Package Type | Flip-chip ball grid array |
| Programmable Logic | 52,224 logic cells |
| Manufacturer | AMD / Xilinx |
Gabay sa Pin Configuration ng XC5VSX50T-2FFG665C flip-chip ball grid array
Pin configuration para sa XC5VSX50T-2FFG665C (flip-chip ball grid array package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC5VSX50T-2FFG665C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC5VSX50T-2FFG665C ay nararapat para sa 6 aplikasyons: Parallel DSP Processing, Communications Line Card, Industrial Control System, Network Packet Processing, Video Image Processing, Test and Measurement Equipment.
Parallel DSP Processing
The XC5VSX50T-2FFG665C is appropriate for parallel DSP pipelines that require substantial programmable logic and a large number of parallel data connections. Its 52,224 logic cells can accommodate filtering, correlation, FFT-related control, data movement, and interface adaptation when the design fits the available fabric and dedicated resources. The 360 inputs and 360 outputs provide substantial board-level parallelism, while the 1 V family supply supports integration with the power architecture of the FFG665 package. Design engineers should partition the pipeline into independently timed stages, use registered boundaries where appropriate, and confirm timing closure against the selected speed grade before hardware release.
Inirekomenda
Communications Line Card
The XC5VSX50T-2FFG665C can implement a communications line card combining parallel data paths, packet control, clocking logic, and external interfaces. With 52,224 logic cells and 360 I/O locations, it offers enough parallelism for multi-lane routing and protocol support without relying solely on hard processors. A line-card implementation should reserve pins for clock references, management interfaces, status signals, and high-speed data according to the FFG665 package files. Because exact interface standards and supported I/O performance are design-dependent, engineers must consult the complete manufacturer tables before selecting voltage standards or timing constraints.
Inirekomenda
Industrial Control System
XC5VSX50T-2FFG665C suits industrial control systems requiring deterministic programmable logic, parallel machine interfaces, and centralized sequencing. The 52,224-cell fabric can host motion-control state machines, I/O mapping, safety-adjacent monitoring logic, and communications gateways when utilization is checked during implementation. For deployment near heat-producing equipment, thermal design must account for the selected commercial temperature grade rather than assuming the industrial suffix. Use the FFG665 package assignments to plan supply distribution, and validate all timing constraints against the speed-grade-2 operating conditions before manufacturing the controller.
Inirekomenda
Network Packet Processing
The XC5VSX50T-2FFG665C can support network packet processing functions such as header classification, queue control, traffic shaping, and protocol adaptation. Its 52,224 logic cells and 360 inputs and outputs allow multiple parallel datapaths to coexist, which is useful when traffic handling must be distributed across programmable pipelines. A practical implementation should separate high-speed data pins from management and debug signals, then apply source-synchronous constraints where applicable. Validate the achievable interface rates against the manufacturer I/O tables rather than deriving them from the general device description.
Inirekomenda
Video Image Processing
XC5VSX50T-2FFG665C can be evaluated for pixel-pipeline and image-processing systems that fit within 52,224 logic cells and the available I/O resources. Parallel color channels, horizontal and vertical counters, frame buffers, and preprocessing stages can be distributed across the fabric. The device's 360 inputs and 360 outputs provide substantial connectivity for source and sink interfaces, while speed grade 2 supports the timing class of the original configuration. Engineers should verify memory resources, clock domains, and target video standards against the complete device tables before treating the FPGA as a suitable platform.
Inirekomenda
Test and Measurement Equipment
The XC5VSX50T-2FFG665C is applicable to programmable test systems that need parallel stimulus generation, timing control, capture logic, and communication with an instrument controller. Its large programmable fabric can combine multiple test channels and control functions, while 360 I/O locations support substantial board connectivity. In an instrumentation design, isolate sensitive analog sections from digital activity, maintain controlled clock distribution, and use the manufacturer pinout files to establish every power and ground connection. Final channel count, operating rates, and synchronization architecture remain functions of the selected I/O standards and board-level implementation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC5VSX50T-2FFG665C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC5VSX50T-1FFG665C | XC5VSX50T-2FFG665I | XC5VSX50T-3FFG665C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 665-pin FCBGA (FFG665) | 665-pin FCBGA (FFG665) - same package | 665-pin FCBGA (FFG665) - same package | 665-pin FCBGA (FFG665) - same package |
| FPGA Family | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT |
| Speed Grade | Grade 2 | Grade 1 - one performance grade lower | Grade 2 - same | Grade 3 - one performance grade higher |
| Temperature Grade | Commercial | Commercial | Industrial | Commercial |
| Logic Cells | 52,224 cells | 52,224 cells | 52,224 cells | 52,224 cells |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Nominal Supply Voltage | 1 V | 1 V | 1 V | 1 V |
| Input Count | 360 inputs | 360 inputs | 360 inputs | 360 inputs |
| Output Count | 360 outputs | 360 outputs | 360 outputs | 360 outputs |
Pangunahing mga Pagkakaiba
- Retains the exact speed-grade-2 performance class while supporting an industrial-temperature configuration (kumpara saXC5VSX50T-2FFG665I)
- Provides one higher performance grade than the grade-1 alternative (kumpara saXC5VSX50T-1FFG665C)
- Avoids the performance increase and associated qualification burden of grade 3 (kumpara saXC5VSX50T-3FFG665C)
Talaan ng Disenyo
Use the AMD Virtex-5 FFG665 package files as the authoritative source for ball assignments and PCB land patterns. The 665-ball FCBGA requires dense escape routing, numerous supply connections, and careful plane management. Place decoupling components close to the associated supply and ground balls, preserve short return paths, and confirm every ball against the selected device suffix before fabrication release.
The nominal 1 V family supply is not a complete board power specification. Obtain the detailed Virtex-5 SXT power-rail requirements, current limits, sequencing rules, and decoupling recommendations from AMD. Separate the required supplies, provide low-impedance distribution, and design for the speed-grade and temperature-grade combination used in production. Do not determine rail current from the logic-cell count alone.
Assign clock-capable pins and high-speed interfaces from the manufacturer tables rather than assuming that any adjacent balls are interchangeable. Route clocks over controlled impedance paths, provide return paths beneath signal lanes, and keep configuration and programming access clear for manufacturing and field updates. Perform signal-integrity and simultaneous-switching-noise analysis with the final stack-up and package model.
Do not treat XC5VSX50T-1FFG665C, XC5VSX50T-2FFG665I, or XC5VSX50T-3FFG665C as unconditional replacements. A speed-grade change alters timing margins, while the I suffix changes the environmental qualification. Rebuild the bitstream, repeat timing closure, and confirm the exact mechanical package and ordering code before approving any substitution.
Impormasyon ng Pagsunod sa Kautusan
A separate listing characterizes XC5VSX50T-2FFG665I as the lead-free variant, but the specific RoHS, REACH, lead-free, and halogen-free status of XC5VSX50T-2FFG665C is not established. The commercial FPGA is not presented as an AEC-Q100-qualified automotive device.