XC6SLX25-N3FTG256I Spartan-6 LX FPGA | AMD Xilinx
N.º de pieza: XC6SLX25-N3FTG256I ✓ ActivoXC6SLX25-N3FTG256I Descripción general
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic IC and a reconfigurable processor. The Spartan-6 LX family combines configurable logic blocks, programmable I/O, embedded memory, and clock-management resources in one package, allowing parallel hardware functions to replace multiple discrete logic devices.
The XC6SLX25-N3FTG256I provides 24,051 logic cells for control logic, data acquisition, communications, and general digital processing. Its 958,464 RAM bits support buffering, packet storage, lookup functions, and other memory-intensive operations. The device exposes 186 user I/O pins, while its 256-FTBGA package provides a compact surface-mount footprint for space-constrained industrial and embedded systems.
The N3 designation identifies the Spartan-6 LX -3N performance option within the specified temperature-grade ordering system. A 1.14 V to 1.26 V operating-supply range supports low-voltage core operation, while the 45 nm CMOS implementation reflects the process technology used for this device family. Designers must also supply the required auxiliary and I/O voltages specified in the manufacturer data sheet.
Typical applications include industrial control systems, data-acquisition equipment, embedded communications, video-processing pipelines, instrumentation, and compact control platforms. The combination of 24,051 logic cells, 186 I/O, and embedded RAM makes the device suitable for designs that need parallel throughput without the complexity of a higher-end FPGA family.
PCB implementation requires a multilayer board with careful power-plane design, decoupling, and a controlled-routing layout for the 256-pin FTBGA package. Use the AMD Spartan-6 package pinout files to assign every ball and confirm boundary-scan, configuration, clock, and power connections before fabrication.
This page combines package and resource details with same-footprint alternatives, comparison data, and implementation guidance. It is intended to accelerate device selection while preserving the checks needed for configuration, signal integrity, thermal performance, and manufacturing readiness.
Alternativas directas para XC6SLX25-N3FTG256I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC6SLX25-N3FTG256I (mismo factor de forma y huella) — difiere en Package, Logic Cells, Speed Grade, Adaptive Logic Modules, Device Type.
XC6SLX25-3FTG256I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX25-2FTG256I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX25-3FT256I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX25-3FTG256C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX25-2FT256I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX25-N3FTG256I Valores máximos y características eléctricas
| FPGA Family | Spartan-6 LX |
| Device Type | Field-Programmable Gate Array (FPGA) |
| Logic Cells | 24,051 cells |
| Configurable Logic Blocks | 1,879 CLBs |
| Block RAM | 958,464 bits |
| User I/O Pins | 186 pins |
| Physical Package Pins | 256 pins |
| Encapsulado | 256-FTBGA, 17 mm x 17 mm |
| Tipo de montaje | Surface Mount |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Nominal Core Supply Voltage | 1.2 V |
| Performance Designator | -3N |
| Temperature Grade | Industrial |
Guía de configuración de pines de XC6SLX25-N3FTG256I 256-ftbga, 17 mm x 17 mm
Configuración de pines para XC6SLX25-N3FTG256I (encapsulado 256-ftbga, 17 mm x 17 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC6SLX25-N3FTG256I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC6SLX25-N3FTG256I es adecuado para 6 aplicacións: Industrial Control Systems, Data-Acquisition Equipment, Embedded Communications, Video and Image Processing, Test and Measurement, Embedded Security and Control.
Industrial Control Systems
The XC6SLX25-N3FTG256I fits compact industrial controllers that combine deterministic parallel logic with multiple external interfaces. Its 24,051 logic cells can implement sequencing, interlocks, motion-control logic, and communication state machines, while 958,464 RAM bits provide local buffering for acquired or exchanged data. The 186 user I/O pins provide substantial connectivity for encoders, discrete sensors, actuators, and industrial buses. Operating the core from 1.14 V to 1.26 V supports compact low-voltage power architectures, but the PCB must provide all required supply rails and robust decoupling for the 256-FTBGA package.
Recomendado
Data-Acquisition Equipment
The XC6SLX25-N3FTG256I is suitable for parallel data-acquisition front ends that require simultaneous sampling control, digital filtering, and buffered data transfer. The FPGA's 24,051 logic cells can host counters, state machines, trigger logic, and fixed-point processing, while its 958,464 RAM bits can hold sample buffers and intermediate filter values. With 186 user I/O pins, the device can support multiple parallel channels and external converters without requiring a large support-device count. Engineering trade-offs include using the AMD pinout files for every BGA assignment and ensuring that clock distribution and data timing meet the acquisition system specifications.
Recomendado
Embedded Communications
The XC6SLX25-N3FTG256I can implement protocol engines, packet filters, and low-latency data paths in embedded communications equipment. Its 24,051 logic cells allow transmit and receive state machines to run in parallel, while the 958,464 embedded RAM bits support frame buffering and lookup structures. The 186 I/O pins can connect multiple interfaces and lower-rate management channels around the principal data interface. For designs operating close to switching or high-speed serial limits, use the -3N timing data from DS162 and complete static timing analysis rather than treating the logic-cell count as a performance estimate.
Recomendado
Video and Image Processing
The XC6SLX25-N3FTG256I supports embedded video pipelines that combine parallel pixel-domain processing with configurable memory and external interface logic. Its 24,051 logic cells can implement color conversion, thresholding, format conversion, and control functions, while 958,464 RAM bits provide line buffers or compact frame-store resources for modest image formats. The 186 user I/O pins give designers flexibility for parallel sensor, display, and control interfaces. Practical designs should use dedicated clocking, account for routing delay in the selected speed grade, and verify video timing against the selected -3N device constraints.
Recomendado
Test and Measurement
The XC6SLX25-N3FTG256I fits compact instrumentation requiring programmable sequencing, calibration tables, and real-time decision logic. The 24,051 logic cells can implement test-vector generation, instrument-control sequencing, and digital signal conditioning, while the 958,464 RAM bits can store calibration or measurement records. Its 186 user I/O pins support parallel front ends, triggers, status signals, and communication ports in a single device. The 256-FTBGA package reduces board area compared with many leaded packages, although high-pin-count escape routing and multilayer-layer planning require careful attention to signal integrity and thermal performance.
Recomendado
Embedded Security and Control
The XC6SLX25-N3FTG256I can implement authentication, protocol, access-control, or cryptographic-control functions where deterministic parallel hardware is valuable. Its 24,051 logic cells allow multiple checking engines and state machines to operate concurrently, while 958,464 RAM bits support buffers and intermediate cryptographic results. The 186 user I/O pins provide flexible integration with sensors, network interfaces, secure storage, and supervisory logic. Because the device is a general-purpose FPGA, security depends on the complete implementation and bitstream lifecycle; designers should also confirm update methods, configuration protection, and timing margins for the exact ordering code.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC6SLX25-N3FTG256I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC6SLX25-3FTG256I | XC6SLX25-2FTG256I | XC6SLX25-3FT256I | XC6SLX25-3FTG256C | XC6SLX25-2FT256I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-FTBGA | 256-FTBGA | 256-FTBGA | 256-LBGA | 256-FTBGA | 256-FTBGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Performance Designator | -3N | -3 | -2 | -3 | -3 | -2 |
| Temperature Suffix | I | I | I | I | C | I |
Diferenciadores clave
- Higher-order -3N performance designation within the Spartan-6 LX family (frente a XC6SLX25-3FTG256I)
- Industrial temperature ordering code with the same 256-FTBGA footprint (frente a XC6SLX25-3FTG256C)
- Pin-compatible FTG256 configuration with unchanged device resources (frente a XC6SLX25-2FTG256I)
Notas de diseño
Use the AMD Spartan-6 package-device pinout files to assign every ball in the 256-FTBGA footprint. Treat fixed-function balls, configuration pins, clock inputs, power, and ground as distinct design groups. Place all required bypass capacitors close to their associated supply balls and provide uninterrupted power and ground planes. Because the package has a high ball count, escape routing should be planned before placement to avoid crossings that require additional signal layers.
Design the power tree around the 1.14 V to 1.26 V core operating range and the additional auxiliary and I/O supplies defined in the manufacturer data sheet. Check both static current and transient demand in the selected -3N configuration. Separate sensitive core and I/O supply paths where required, keep return currents short, and validate the regulator loop against the FPGA's changing current demand before releasing the power design for production.
Route clocks separately from high-edge-rate data and use the package-specific ball information to place clock inputs near the relevant internal resources. Apply controlled-impedance PCB rules to long external interfaces, especially when they leave the FPGA through the 0.8 mm-pitch BGA. Include receiver termination, source-series resistance, and layer-transition geometry in the simulation. Use DS162 timing limits as the final authority for external interface requirements.
Do not select a replacement solely by the XC6SLX25 family name. The performance code, FT or FTG package code, 256-ball suffix, and I or C temperature suffix affect timing, qualification, or ordering. When moving from XC6SLX25-N3FTG256I to a candidate, verify every ball assignment, rerun timing analysis, confirm the operating-temperature requirement, and check configuration behavior. The AMD package pinout resource must be used for the exact device and package combination.
Información de cumplimiento
The retrieved exact-MPN information does not provide a definitive RoHS, REACH, halogen-free, or conflict-minerals declaration for XC6SLX25-N3FTG256I. Verify these attributes against the current manufacturer product documentation or declaration before procurement.