XC6SLX45-N3FGG484C - 45nm Spartan-6 LX FPGA | AMD
N.º de pieza: XC6SLX45-N3FGG484C ✗ Fin de vidaXC6SLX45-N3FGG484C Descripción general
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and configurable I/O can be programmed after manufacture. An FPGA sits between fixed-function ASICs and general-purpose processors: it provides higher parallelism and deterministic hardware behavior than software execution, while retaining the reprogrammability and development flexibility of a programmable device. The Spartan-6 LX family is positioned for embedded processing, industrial control, communications, consumer equipment, and high-volume applications where system integration and cost are important.
Key device attributes include 43,661 logic cells, 316 available I/O, a 1.2 V core supply, and a 484-BBGA package. The 316 I/O enable interfaces to external memories, communications transceivers, sensors, displays, control signals, and other digital or mixed-signal peripherals. The 45 nm process provides a practical balance between logic density, static and dynamic power behavior, and manufacturing cost. The -3N grade is intended for designs requiring stronger performance than the lower-speed Spartan-6 grades while retaining the family's low-power positioning.
The Spartan-6 LX architecture combines configurable logic cells with selectable DSP slices, block RAM, clock-management resources, and a broad I/O structure. DSP slices accelerate multiply-accumulate operations commonly used in filtering, modulation, signal processing, and control loops. Block RAM supports packet buffering, local data storage, lookup functions, and data-width conversion. Dedicated clocking resources allow multiple domains to be derived and controlled from a common reference, which is important in designs containing parallel data paths or independent serial interfaces.
Typical uses include industrial automation, embedded control, networking equipment, test and measurement, video and display processing, sensor acquisition, and consumer electronics. For a new board, designers should preserve the ball map and escape routing of the selected 484-BBGA package, use the manufacturer's recommended power and decoupling configuration, and validate every high-speed interface against the selected I/O standard and clocking topology. Configuration storage, JTAG access, bank voltages, and termination requirements should be reviewed before schematic release.
The XC6SLX45-N3FGG484C is specifically suited to a design that requires the Spartan-6 LX logic density and the -3N speed grade in the 484-BBGA footprint. Related XC6SLX45 variants can be considered for different speed grades, temperature grades, or package choices, but pin compatibility and device functionality must be confirmed against the selected package documentation and the complete system requirements.
This product summary combines the manufacturer family information and distributor catalog attributes with package, application, and design guidance intended to make engineering selection faster. It also highlights the parameters that should be checked during schematic, PCB, thermal, and lifecycle review.
Alternativas directas para XC6SLX45-N3FGG484C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC6SLX45-N3FGG484C (mismo factor de forma y huella) — difiere en Package, Logic Cells, Speed Grade, Block RAM, Operating Temperature.
XC6SLX45-3FGG484C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX45-N3FG484I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX45T-N3FGG484C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC6SLX45-2FGG484C
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC6SLX45-2FGG484I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC6SLX45-N3FGG484C Valores máximos y características eléctricas
| Device Type | Spartan-6 LX Field Programmable Gate Array (FPGA) |
| Logic Cells | 43,661 logic cells |
| I/O Count | 316 I/O |
| Encapsulado | 484-BBGA, 15 x 15 mm |
| Process Technology | 45 nm low-power copper process |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -3N |
| Device Family | Spartan-6 LX |
| Tipo de montaje | Surface mount |
| Ball Pitch | 0.80 mm |
Guía de configuración de pines de XC6SLX45-N3FGG484C 484-bbga, 15 x 15 mm
Configuración de pines para XC6SLX45-N3FGG484C (encapsulado 484-bbga, 15 x 15 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC6SLX45-N3FGG484C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC6SLX45-N3FGG484C es adecuado para 6 aplicacións: Industrial Automation Controller, Communications and Packet Processing, Test and Measurement Instrumentation, Video and Display Interface, Sensor Acquisition and Data Processing, Embedded Consumer and Networking Equipment.
Industrial Automation Controller
The XC6SLX45-N3FGG484C fits industrial automation systems that combine sequential control, parallel data processing, and multiple external interfaces. Its 43,661 logic cells can accommodate control logic, state machines, protocol handling, and diagnostics, while 316 I/O provide connections to sensors, actuators, encoders, and industrial communications. The -3N speed grade is useful for deterministic control paths and higher-rate signal acquisition. Place the device in a 484-BBGA layout with the manufacturer's recommended decoupling, preserve the BGA escape geometry, and validate I/O voltage banks against every attached sensor and transceiver.
Recomendado
Communications and Packet Processing
The XC6SLX45-N3FGG484C is appropriate for communications equipment requiring parallel datapaths, programmable protocol handling, and moderate local buffering. The Spartan-6 LX logic fabric can implement framing, filtering, routing, and interface adaptation, while block RAM supports packet buffering and DSP slices can accelerate common signal operations. With 316 I/O, the device can connect directly to transceivers, memories, and parallel buses. A -3N design should be clocked and constrained according to the family timing documentation, with bank-specific I/O supplies and termination reviewed for each communication standard.
Recomendado
Test and Measurement Instrumentation
The XC6SLX45-N3FGG484C can implement a multi-channel acquisition, generation, and analysis instrument when deterministic parallel logic is more useful than a sequential processor. Its 43,661 logic cells support timing engines, trigger logic, digital pattern processing, and control sequences, while DSP slices and block RAM support filters and sample storage. The 316-I/O count allows several instruments or interface groups to share one programmable controller. Care should be taken to use the correct I/O standards, isolate analog circuitry, and define clocking and trigger latency in the design specification.
Recomendado
Video and Display Interface
The XC6SLX45-N3FGG484C is suitable for pixel-oriented video, display, and graphics-adaptation functions where multiple parallel data paths must operate predictably. The logic fabric can combine timing generation, pixel processing, frame buffering, and interface conversion, while block RAM can hold line or frame data and DSP slices can perform arithmetic and filtering. The 316 I/O provide substantial connectivity for parallel video buses and control signals. Timing constraints should be created for every video clock domain, and I/O drive strength, voltage, and impedance must match the connected display or capture device.
Recomendado
Sensor Acquisition and Data Processing
The XC6SLX45-N3FGG484C supports parallel sensor acquisition, conditioning, and digital filtering when several channels must be processed simultaneously. Its 43,661 logic cells can implement acquisition state machines, calibration tables, threshold logic, and sensor fusion, while DSP slices and block RAM support filtering and temporary buffering. With 316 I/O, the FPGA can connect to parallel ADC, digital sensor, and memory interfaces. Input thresholds, clocking relationships, and I/O timing must be verified in hardware, especially when sensor timing is not synchronous to the FPGA system clock.
Recomendado
Embedded Consumer and Networking Equipment
The XC6SLX45-N3FGG484C can consolidate protocol conversion, user-interface control, and network packet handling in embedded consumer or networking products. Its 43,661 logic cells and 316 I/O allow a compact design to combine local storage, control logic, status displays, and external network interfaces without relying on a separate processor for every function. The -3N grade can improve timing margin in parallel interface paths. Power consumption, configuration boot time, thermal performance, and product lifecycle requirements should be evaluated during architecture selection to ensure the mature Spartan-6 LX family remains appropriate.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC6SLX45-N3FGG484C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC6SLX45-3FGG484C | XC6SLX45-N3FG484I | XC6SLX45T-N3FGG484C | XC6SLX45-2FGG484C | XC6SLX45-2FGG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA | 484-BBGA |
| Series | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LXT | Spartan-6 LX | Spartan-6 LX |
| Speed Grade | -3N | -3 | -3N | -3N | -2 | -2 |
| Temperature Suffix | C | C | I | C | C | I |
| Logic Cells | 43,661 logic cells | 43,661 logic cells | 43,661 logic cells | 43,661 logic cells | 43,661 logic cells | 43,661 logic cells |
Diferenciadores clave
- Maintains the exact -3N speed grade while offering a different temperature-grade ordering option (frente a XC6SLX45-N3FG484I)
- Provides 20 more listed I/O than the T-family catalog variant (frente a XC6SLX45T-N3FGG484C)
- Uses a lower -2 speed grade in the same family and package ecosystem (frente a XC6SLX45-2FGG484C)
- Supports a higher -3 speed grade option in the same package (frente a XC6SLX45-3FGG484C)
Notas de diseño
Follow the family datasheet for core and I/O supply separation, sequencing, voltage limits, and decoupling values. The catalog identifies a 1.2 V core supply, but the complete bank requirements cannot be inferred from that value. Place required bypass capacitors adjacent to the relevant supply and ground balls, provide adequate current headroom for simultaneous switching loads, and test power-up and power-down behavior across the full temperature range before production.
The 484-BBGA package requires a 15 x 15 mm, 0.80 mm-pitch land pattern with BGA escape routing that follows the manufacturer package drawing. Preserve the exact ball assignments, power and ground connectivity, and differential-pair geometry from the selected device pin file. Use symmetric via fields and appropriate plane connections, then inspect the assembled board for voiding and solder bridging because defects can be difficult to diagnose at high pin density.
Do not treat every XC6SLX45 484-BBGA ordering code as automatically interchangeable. Speed grade, T suffix, temperature suffix, and device variant can affect timing, supported features, or I/O availability. Review the exact ordering table, compare the source and replacement pin files, and rerun static timing analysis. For example, the catalog lists 296 I/O for the T variant versus 316 I/O for the target, so those variants should not be interchanged without a design review.
Assign every external interface to the correct voltage bank and apply the datasheet-recommended I/O standard, drive strength, slew rate, and on- or off-chip termination. Clock inputs and high-speed interfaces require controlled impedance, short return paths, and separation from noisy switching nodes. Because the device supports many parallel interfaces, verify timing margins at the selected -3N speed grade and account for board skew in the constraint file.
Información de cumplimiento
The available catalog information identifies a lead-free 484-BBGA package for a closely related ordering code, but exact RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status for XC6SLX45-N3FGG484C requires confirmation from the manufacturer or current product documentation.