AMD

XC7A15T-L1CSG325I - 16,640-Cell Low-Power Artix-7 FPGA | AMD

N.º de pieza: XC7A15T-L1CSG325I ✓ Activo
1 V Vdss 324-ball CSBGA (CSG325) Package
MOQ: 1 |

XC7A15T-L1CSG325I Descripción general

The AMD XC7A15T-L1CSG325I is a low-power Artix-7 field-programmable gate array with 16,640 programmable logic cells, 150 user I/O, and a 324-ball CSBGA package. Built on 28 nm FPGA technology, the device combines programmable logic, DSP48E2 processing resources, block RAM, and high-speed serial transceivers in a single monolithic device.

An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing functions are defined after manufacture. The Artix-7 family belongs to AMD's programmable-logic portfolio and is positioned for cost-sensitive, power-conscious designs that need more flexibility than fixed-function logic devices. It supports parallel processing, protocol bridging, control logic, data acquisition, and embedded system integration without requiring a separate application-specific integrated circuit.

The XC7A15T-L1CSG325I provides 16,640 logic cells and 150 user I/O in a compact CSG325 package. Its 28 nm process technology supports a core supply of 1 V, while the -L speed designation identifies the lower-power performance grade. The -I suffix identifies the industrial temperature grade, supporting operation across the industrial temperature range when configured with the appropriate I/O standards.

Programmable logic in this device can implement parallel datapaths, state machines, packet-processing functions, and control systems. Dedicated DSP slices accelerate fixed-point and filtered arithmetic, while block RAM provides on-chip storage for buffers, queues, and data-aggregation functions. General-purpose I/O can be assigned to common interfaces when voltage, slew-rate, and drive-strength requirements are compatible with the selected bank configuration.

Typical uses include industrial control and data acquisition, video and image-processing pipelines, embedded instrumentation, networking equipment, test systems, and compact edge-processing modules. The monolithic FPGA also supports parallel sensor acquisition, where multiple channels can be processed concurrently and then serialized through an external transceiver or high-speed parallel interface.

Layout planning should start with the AMD Artix-7 package pinout files, since the CSG325 package exposes hundreds of balls and its assignment differs from the smaller FTG256 and FGG484 options. Confirm power rails, decoupling, configuration access, clocking, and high-speed differential pairs against the device pinout and PCB stack-up before release.

This page combines device-specific specifications, package information, drop-in comparison details, sourcing guidance, and practical PCB-design considerations. It supports faster engineering evaluation by consolidating the information normally spread across the Artix-7 data sheet, package pinout files, and individual distributor listings.

Alternativas directas para XC7A15T-L1CSG325I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

XC7A15T-1CSG325I

✅ Sustitución directa
📦 324-ball CSBGA (CSG325)
Same CSG325 package, density, and 150-I/O device family; speed grade changes from L1 to -1, affecting timing performance and power characteristics

📋 Alternativa de referencia (no en el catálogo)

XC7A15T-L1CSG325I Valores máximos y características eléctricas

Device Type Artix-7 Field-Programmable Gate Array (FPGA)
Logic Cell Count 16,640 cells
User I/O Count 150 I/O
Process Technology 28 nm
Core Supply Voltage 1 V
Encapsulado 324-ball CSBGA (CSG325)
Performance Grade Low-power L1 grade
Temperature Grade Industrial (-I)
Tipo de montaje Surface Mount

Guía de configuración de pines de XC7A15T-L1CSG325I 324-ball csbga (csg325)

Configuración de pines para XC7A15T-L1CSG325I (encapsulado 324-ball csbga (csg325)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 324-ball csbga (csg325) para XC7A15T-L1CSG325I

No hay datos detallados de patillaje disponibles para XC7A15T-L1CSG325I.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC7A15T-L1CSG325I es adecuado para 6 aplicacións: Industrial Data-Acquisition System, Parallel Image-Processing Pipeline, Embedded Instrumentation and Control, Communication Protocol Bridging, Video Test and Measurement, Industrial Edge Processing.

🏭

Industrial Data-Acquisition System

The XC7A15T-L1CSG325I is suitable for acquiring and conditioning multiple sensor channels in parallel because its 16,640 logic cells can implement channel control, filtering, timestamp capture, and buffer management while 150 user I/O provide generous external connectivity. The 1 V core and 28 nm Artix-7 implementation support a compact, power-conscious instrument enclosure. Use configurable I/O standards for sensor inputs and digital interfaces, and confirm bank-compatible supply voltages in the CSG325 package data. The L1 grade is appropriate when the channel count and sample rate do not require the higher -1 speed grade.

📺

Parallel Image-Processing Pipeline

The XC7A15T-L1CSG325I can implement a parallel pixel-processing pipeline by assigning acquisition, line-buffer control, thresholding, and color-channel functions across its programmable logic and block RAM resources. The 150-I/O interface is valuable for connecting image sensors, capture devices, and parallel processors without an external bus bottleneck. A 1 V core supply supports integration into compact camera modules, while dedicated DSP resources can accelerate multiply-accumulate operations. Validate the selected I/O standards, clock domains, and external memory interface against the complete design.

🔧

Embedded Instrumentation and Control

The XC7A15T-L1CSG325I fits instrumentation that combines measurement conditioning, timing control, local storage, and a serial management interface. Its 16,640 logic cells are sufficient for substantial control and datapath logic, while 150 I/O support trigger inputs, status signals, displays, and communication transceivers. The L1 grade can be advantageous in fanless or space-constrained laboratory equipment where the design prioritizes low power over maximum switching performance. Use the AMD development environment and device-specific constraints when planning clocks, configuration, and JTAG access.

🌐

Communication Protocol Bridging

The XC7A15T-L1CSG325I is appropriate for protocol conversion and data-routing modules that must connect interfaces with different widths or timing requirements. Parallel programmable logic can perform framing, buffering, byte alignment, and flow-control functions across several channels, while the 150-I/O count reduces the need for intermediate bus devices. The 28 nm Artix-7 device supports compact, low-power network-interface hardware. Confirm whether the selected board requires an FPGA with integrated high-speed transceivers or can use external transceivers driven by ordinary user I/O.

🎥

Video Test and Measurement

The XC7A15T-L1CSG325I can serve as the central controller and pattern generator in video test equipment, where programmable timing, pattern generation, capture control, and result analysis benefit from parallel logic. With 16,640 logic cells and 150 user I/O, the device can support multiple digital video interfaces and control paths in a single component. Its 1 V core supply and low-power grade suit compact test heads, although the design must stay within the timing limits of the selected L1 grade. Verify differential I/O requirements and clocking with the package and device documentation.

🧩

Industrial Edge Processing

The XC7A15T-L1CSG325I can perform local filtering, feature extraction, and decision logic at the edge of an industrial network. The 16,640-cell fabric provides parallel throughput for data conditioning without moving every operation to a host processor, while 150 I/O support digital sensors, local buses, and status controls. The L1 grade is useful in unattended equipment where a lower power envelope improves thermal margins. Establish watchdog behavior, configuration security, and field-update requirements early because these functions affect both board design and deployment planning.

What is the AMD XC7A15T-L1CSG325I?
The AMD XC7A15T-L1CSG325I is a low-power Artix-7 FPGA containing 16,640 programmable logic cells and 150 user I/O in a 324-ball CSBGA package. It uses 28 nm FPGA technology with a 1 V core supply. According to the AMD Artix-7 data sheet, the device combines programmable logic, DSP48E2 resources, block RAM, and programmable I/O for embedded control, data acquisition, and parallel signal-processing designs.
What are the key specifications of XC7A15T-L1CSG325I?
The XC7A15T-L1CSG325I provides 16,640 logic cells, 150 user I/O, a 1 V core supply, and 28 nm process technology in a CSG325 package. The -L1 portion identifies the low-power performance grade, while -I identifies the industrial temperature grade. AMD's Artix-7 data sheet and package pinout files are the primary references for configuration, memory, DSP, banking, and absolute-maximum-limit details.
Where can I download the XC7A15T-L1CSG325I datasheet PDF?
The XC7A15T-L1CSG325I data sheet is available through the AMD Artix-7 documentation page and the archived Artix-7 data sheet listed on this page. For complete board-level work, also download the CSG325 package pinout files from AMD's Artix-7 package-device pinout page. Use the data sheet for electrical limits and the package files for ball assignments; neither substitutes for the other.
Where can I find the XC7A15T-L1CSG325I pinout?
The authoritative XC7A15T-L1CSG325I pinout is distributed in the AMD Artix-7 package-device pinout files, which include ASCII and CSV package assignments for CSG325. Use those files when assigning PCB balls for power, configuration, clocks, and user I/O. The exact ball names, power-supply requirements, and I/O-bank boundaries should be taken from the CSG325 package data rather than inferred from a smaller FTG256 or FGG484 package.
Can XC7A15T-1CSG325I replace XC7A15T-L1CSG325I?
The XC7A15T-1CSG325I is the closest same-package alternative because it uses the same CSG325 footprint and Artix-7 device family. The -1 device is a higher performance grade than the -L1 device, so power, timing margins, and thermal results can differ. Confirm that the PCB supports the alternative's speed grade and revalidate timing, power integrity, configuration behavior, and any temperature-sensitive design margin before substitution.
What is the difference between XC7A15T-L1CSG325I and XC7A15T-1CSG325I?
Both devices are 16,640-cell Artix-7 FPGAs offered in the CSG325 package, but their speed designations differ. XC7A15T-L1CSG325I is the L1 low-power grade, while XC7A15T-1CSG325I is the -1 performance grade. The distinction affects timing performance and power characteristics, so the faster device is a possible package-compatible migration rather than an automatic equivalent for designs optimized around the L1 power envelope.
When should I choose XC7A15T-L1CSG325I instead of the -1 grade?
Choose XC7A15T-L1CSG325I when the design targets the lower-power Artix-7 performance grade and has been validated against L1 timing and thermal limits. It is appropriate for cost-sensitive, thermally constrained systems where the -1 grade's additional performance is not needed. Choose the -1 variant when timing closure, operating margin, or a previously qualified faster design requires the higher speed grade.
Is XC7A15T-L1CSG325I suitable for industrial equipment?
The -I suffix identifies XC7A15T-L1CSG325I as an industrial-grade device, making it appropriate for industrial equipment specified for extended operating temperatures. The I/O standard, configuration method, clocking architecture, and power design must still be checked against the industrial requirements of the end product. Use the AMD Artix-7 data sheet for the graded electrical limits and the package pinout files for board implementation.
What is the best drop-in replacement for XC7A15T-L1CSG325I?
The XC7A15T-1CSG325I is the best-supported package-level replacement because both use the CSG325 package and the same XC7A15T Artix-7 density. It changes the speed grade from L1 to -1 rather than the footprint. Review timing reports, power estimates, thermal margins, configuration sequences, and any supply or peripheral requirements before treating it as a drop-in production substitution.
What can replace XC7A15T-L1CSG325I?
A replacement should preserve the CSG325 footprint, 150-I/O interface, configuration method, performance class, and electrical characteristics required by the design. XC7A15T-1CSG325I is the closest package-compatible option because it retains the same family, density, and package. Other Artix-7 packages, including FTG256, FGG484, and CSG324 variants, require layout changes and are not direct board-level replacements.
Is XC7A15T-L1CSG325I the same as XC7A15T-1CSG324I?
No. XC7A15T-1CSG324I uses the CSG324 package designation, while the target uses CSG325, and the device speed grades also differ from L1 to -1. Package names containing different ball counts or layouts cannot be assumed to be pin-compatible. Treat CSG324 as a functional Artix-7 alternative requiring a new land pattern and complete engineering review, not as a drop-in replacement.
Where can I buy XC7A15T-L1CSG325I online?
Use the Request a Quote form on this page to request current availability, lot traceability, and a quotation for the XC7A15T-L1CSG325I. Quote requests should specify the required package, quantity, date code preference, and whether automotive or industrial traceability is required. Current supply and lead time can vary by lot, so request a written confirmation before releasing a production purchase order.
What is the price of XC7A15T-L1CSG325I?
Pricing for the XC7A15T-L1CSG325I depends on quantity, lot availability, and supply conditions, so use the Request a Quote form on this page for the current quotation. The form is the appropriate route for transactional inquiries because it captures the exact MPN and requested quantity. No static price should be used as a purchasing commitment without a current quotation.
What is the lead time for XC7A15T-L1CSG325I?
Request the current lead time through the Request a Quote form on this page and include your required quantity and target delivery date. Lead time for this FPGA can vary with inventory, allocation, and manufacturing conditions. For schedule-critical programs, request lot and date-code details in writing and avoid treating a distributor inventory indication as a guaranteed production allocation.
How do I design the power and decoupling for XC7A15T-L1CSG325I?
Start with the AMD Artix-7 power-supply, decoupling, and package-connection guidance, then follow the CSG325 pinout files for every VCC, VCCAUX, and VCCO connection. Place decoupling capacitors close to their assigned supply balls, keep high-current paths compact, and provide separate return paths for noisy and sensitive loads. Validate the final rail tolerances, sequencing, and transient response against the device data sheet.

Datos de referencia de ingeniería para XC7A15T-L1CSG325I — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the XC7A15T-L1CSG325I when an industrial design requires the Artix-7 XC7A15T density in a 324-ball CSG325 package and prioritizes the L1 low-power performance grade. Its 16,640 logic cells and 150 I/O suit parallel control, acquisition, and protocol-processing functions where a lower power envelope is more valuable than maximum speed. The XC7A15T-1CSG325I is the practical package-compatible migration when additional timing margin is needed; it retains the same footprint and density but changes the speed grade, so timing, power, and thermal results must be regenerated. Artix-7 alternatives in FTG256, FGG484, or CSG324 packages should be considered only for a redesigned PCB because their land patterns and I/O assignments are not interchangeable.

Comparación con alternativas

Parámetro Este producto XC7A15T-1CSG325I
Brand AMD AMD
Package 324-ball CSBGA (CSG325) 324-ball CSBGA (CSG325)
FPGA Family Artix-7 Artix-7
Logic Cells 16,640 cells 16,640 cells
User I/O 150 I/O 150 I/O
Process Technology 28 nm 28 nm
Core Supply Voltage 1 V 1 V
Speed Grade L1 low-power grade -1 performance grade
Temperature Grade Industrial (-I) Industrial (-I)

Diferenciadores clave

  • Low-power Artix-7 performance grade (frente a XC7A15T-1CSG325I)
  • Substantial I/O availability in a single BGA device (frente a XC7A15T-1CSG325I)
  • Package-compatible migration for existing CSG325 layouts (frente a XC7A15T-1CSG325I)

Notas de diseño

Use the AMD Artix-7 CSG325 package pinout files as the assignment authority for all PCB balls. The 324-ball BGA requires dense escape routing, and assigning signals from a smaller Artix-7 package can produce incorrect power, clock, configuration, or differential-pair connections. Preserve the documented reference-plane treatment beneath the device, place decoupling capacitance close to its designated supply balls, and verify the complete land pattern against the mechanical drawing.

Separate the 1 V core rail from selectable I/O supplies and plan their distribution in accordance with the AMD Artix-7 power-supply guidance. Place high-current and high-frequency decoupling paths directly between the appropriate supply balls and their ground references, then keep sensitive configuration and reference circuitry away from noisy return paths. Confirm voltage tolerance, sequencing, and current limits against the Artix-7 data sheet before releasing the power network.

Do not treat XC7A15T-L1CSG325I as interchangeable with the -1 speed grade without rerunning timing and thermal analysis. The shared CSG325 footprint simplifies a board migration, but the -1 grade can change internal timing margins and power behavior. Also avoid carrying over a pin assignment from FTG256, FGG484, or CSG324 packages; those packages have different ball counts or layouts even though they belong to the same Artix-7 family.

Plan clock and high-speed differential routing with the Artix-7 device speed grade and the selected I/O standard in mind. The L1 grade generally has less timing margin than the -1 grade, so external interface timing should be evaluated with realistic board skew and loss rather than only ideal device timing. Use the AMD package files to identify dedicated clock-capable pins and preserve return paths beneath high-speed pairs.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The -I suffix identifies the industrial temperature grade, not an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current AMD product documentation or shipment documentation.

Búsquedas relacionadas

xc7a15t 1ftg256c xc7a15t 1cpg236c xc7a15t 1fgg484c xc7a15t 1ftg256i xc7a15t 1csg324i xc7a15t 1csg324c xc7a15t 1csg325i XC7A15T-L1CSG325I datasheet XC7A15T-L1CSG325I pinout XC7A15T-L1CSG325I replacement XC7A15T-L1CSG325I price AMD XC7A15T-L1CSG325I XC7A15T-L1CSG325I CSG325 package XC7A15T-L1CSG325I vs XC7A15T-1CSG325I

Componentes & términos relacionados

AMD Xilinx XC7A15T-L1CSG325I XC7A15T-1CSG325I Artix-7 field-programmable gate array FPGA programmable logic logic cell CSG325 324-ball CSBGA BGA package surface mount 28 nm process technology 1 V core supply L1 low-power speed grade industrial temperature grade DSP48E2 block RAM user I/O parallel processing data acquisition protocol bridging AMD Vivado RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ