XC7A15T-L1CSG325I - 16,640-Cell Low-Power Artix-7 FPGA | AMD
MPN: XC7A15T-L1CSG325I ✓ सक्रियXC7A15T-L1CSG325I अवलोकन
An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing functions are defined after manufacture. The Artix-7 family belongs to AMD's programmable-logic portfolio and is positioned for cost-sensitive, power-conscious designs that need more flexibility than fixed-function logic devices. It supports parallel processing, protocol bridging, control logic, data acquisition, and embedded system integration without requiring a separate application-specific integrated circuit.
The XC7A15T-L1CSG325I provides 16,640 logic cells and 150 user I/O in a compact CSG325 package. Its 28 nm process technology supports a core supply of 1 V, while the -L speed designation identifies the lower-power performance grade. The -I suffix identifies the industrial temperature grade, supporting operation across the industrial temperature range when configured with the appropriate I/O standards.
Programmable logic in this device can implement parallel datapaths, state machines, packet-processing functions, and control systems. Dedicated DSP slices accelerate fixed-point and filtered arithmetic, while block RAM provides on-chip storage for buffers, queues, and data-aggregation functions. General-purpose I/O can be assigned to common interfaces when voltage, slew-rate, and drive-strength requirements are compatible with the selected bank configuration.
Typical uses include industrial control and data acquisition, video and image-processing pipelines, embedded instrumentation, networking equipment, test systems, and compact edge-processing modules. The monolithic FPGA also supports parallel sensor acquisition, where multiple channels can be processed concurrently and then serialized through an external transceiver or high-speed parallel interface.
Layout planning should start with the AMD Artix-7 package pinout files, since the CSG325 package exposes hundreds of balls and its assignment differs from the smaller FTG256 and FGG484 options. Confirm power rails, decoupling, configuration access, clocking, and high-speed differential pairs against the device pinout and PCB stack-up before release.
This page combines device-specific specifications, package information, drop-in comparison details, sourcing guidance, and practical PCB-design considerations. It supports faster engineering evaluation by consolidating the information normally spread across the Artix-7 data sheet, package pinout files, and individual distributor listings.
के लिए ड्रॉप-इन विकल्प XC7A15T-L1CSG325I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
XC7A15T-1CSG325I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC7A15T-L1CSG325I Maximum Ratings और Electrical Characteristics
| Device Type | Artix-7 Field-Programmable Gate Array (FPGA) |
| Logic Cell Count | 16,640 cells |
| User I/O Count | 150 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| पैकेज | 324-ball CSBGA (CSG325) |
| Performance Grade | Low-power L1 grade |
| Temperature Grade | Industrial (-I) |
| माउंटिंग प्रकार | Surface Mount |
XC7A15T-L1CSG325I 324-ball csbga (csg325) पिन कॉन्फ़िगरेशन गाइड
XC7A15T-L1CSG325I (324-ball csbga (csg325) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC7A15T-L1CSG325I.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC7A15T-L1CSG325I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Data-Acquisition System, Parallel Image-Processing Pipeline, Embedded Instrumentation and Control, Communication Protocol Bridging, Video Test and Measurement, Industrial Edge Processing.
Industrial Data-Acquisition System
The XC7A15T-L1CSG325I is suitable for acquiring and conditioning multiple sensor channels in parallel because its 16,640 logic cells can implement channel control, filtering, timestamp capture, and buffer management while 150 user I/O provide generous external connectivity. The 1 V core and 28 nm Artix-7 implementation support a compact, power-conscious instrument enclosure. Use configurable I/O standards for sensor inputs and digital interfaces, and confirm bank-compatible supply voltages in the CSG325 package data. The L1 grade is appropriate when the channel count and sample rate do not require the higher -1 speed grade.
अनुशंसित
Parallel Image-Processing Pipeline
The XC7A15T-L1CSG325I can implement a parallel pixel-processing pipeline by assigning acquisition, line-buffer control, thresholding, and color-channel functions across its programmable logic and block RAM resources. The 150-I/O interface is valuable for connecting image sensors, capture devices, and parallel processors without an external bus bottleneck. A 1 V core supply supports integration into compact camera modules, while dedicated DSP resources can accelerate multiply-accumulate operations. Validate the selected I/O standards, clock domains, and external memory interface against the complete design.
अनुशंसित
Embedded Instrumentation and Control
The XC7A15T-L1CSG325I fits instrumentation that combines measurement conditioning, timing control, local storage, and a serial management interface. Its 16,640 logic cells are sufficient for substantial control and datapath logic, while 150 I/O support trigger inputs, status signals, displays, and communication transceivers. The L1 grade can be advantageous in fanless or space-constrained laboratory equipment where the design prioritizes low power over maximum switching performance. Use the AMD development environment and device-specific constraints when planning clocks, configuration, and JTAG access.
अनुशंसित
Communication Protocol Bridging
The XC7A15T-L1CSG325I is appropriate for protocol conversion and data-routing modules that must connect interfaces with different widths or timing requirements. Parallel programmable logic can perform framing, buffering, byte alignment, and flow-control functions across several channels, while the 150-I/O count reduces the need for intermediate bus devices. The 28 nm Artix-7 device supports compact, low-power network-interface hardware. Confirm whether the selected board requires an FPGA with integrated high-speed transceivers or can use external transceivers driven by ordinary user I/O.
अनुशंसित
Video Test and Measurement
The XC7A15T-L1CSG325I can serve as the central controller and pattern generator in video test equipment, where programmable timing, pattern generation, capture control, and result analysis benefit from parallel logic. With 16,640 logic cells and 150 user I/O, the device can support multiple digital video interfaces and control paths in a single component. Its 1 V core supply and low-power grade suit compact test heads, although the design must stay within the timing limits of the selected L1 grade. Verify differential I/O requirements and clocking with the package and device documentation.
अनुशंसित
Industrial Edge Processing
The XC7A15T-L1CSG325I can perform local filtering, feature extraction, and decision logic at the edge of an industrial network. The 16,640-cell fabric provides parallel throughput for data conditioning without moving every operation to a host processor, while 150 I/O support digital sensors, local buses, and status controls. The L1 grade is useful in unattended equipment where a lower power envelope improves thermal margins. Establish watchdog behavior, configuration security, and field-update requirements early because these functions affect both board design and deployment planning.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC7A15T-L1CSG325I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC7A15T-1CSG325I |
|---|---|---|
| Brand | AMD | AMD |
| Package | 324-ball CSBGA (CSG325) | 324-ball CSBGA (CSG325) |
| FPGA Family | Artix-7 | Artix-7 |
| Logic Cells | 16,640 cells | 16,640 cells |
| User I/O | 150 I/O | 150 I/O |
| Process Technology | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V |
| Speed Grade | L1 low-power grade | -1 performance grade |
| Temperature Grade | Industrial (-I) | Industrial (-I) |
मुख्य विशेषताएँ
- Low-power Artix-7 performance grade (बनामXC7A15T-1CSG325I)
- Substantial I/O availability in a single BGA device (बनामXC7A15T-1CSG325I)
- Package-compatible migration for existing CSG325 layouts (बनामXC7A15T-1CSG325I)
डिज़ाइन नोट्स
Use the AMD Artix-7 CSG325 package pinout files as the assignment authority for all PCB balls. The 324-ball BGA requires dense escape routing, and assigning signals from a smaller Artix-7 package can produce incorrect power, clock, configuration, or differential-pair connections. Preserve the documented reference-plane treatment beneath the device, place decoupling capacitance close to its designated supply balls, and verify the complete land pattern against the mechanical drawing.
Separate the 1 V core rail from selectable I/O supplies and plan their distribution in accordance with the AMD Artix-7 power-supply guidance. Place high-current and high-frequency decoupling paths directly between the appropriate supply balls and their ground references, then keep sensitive configuration and reference circuitry away from noisy return paths. Confirm voltage tolerance, sequencing, and current limits against the Artix-7 data sheet before releasing the power network.
Do not treat XC7A15T-L1CSG325I as interchangeable with the -1 speed grade without rerunning timing and thermal analysis. The shared CSG325 footprint simplifies a board migration, but the -1 grade can change internal timing margins and power behavior. Also avoid carrying over a pin assignment from FTG256, FGG484, or CSG324 packages; those packages have different ball counts or layouts even though they belong to the same Artix-7 family.
Plan clock and high-speed differential routing with the Artix-7 device speed grade and the selected I/O standard in mind. The L1 grade generally has less timing margin than the -1 grade, so external interface timing should be evaluated with realistic board skew and loss rather than only ideal device timing. Use the AMD package files to identify dedicated clock-capable pins and preserve return paths beneath high-speed pairs.
अनुपालन जानकारी
The -I suffix identifies the industrial temperature grade, not an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current AMD product documentation or shipment documentation.