XC7Z007S-1CLG400C - 667MHz Zynq-7000 SoC | AMD | 23K
N.º de pieza: XC7Z007S-1CLG400C ✓ ActivoXC7Z007S-1CLG400C Descripción general
A Zynq-7000 SoC is an FPGA and programmable SoC platform that combines programmable logic with a hard processor subsystem. This integration places the ARM Cortex-A9 processor, CoreSight debug and trace capabilities, programmable logic, memory controllers, and programmable I/O in one package. Compared with a discrete processor-plus-FPGA design, the combined architecture can reduce board space, simplify interconnect, and support hardware-assisted processing alongside Linux-based software control.
The XC7Z007S provides 23K logic cells and a stated operating frequency of 667 MHz. It is manufactured using a 28 nm process and is identified with a 1 V operating-class designation. Its -1 speed grade places it in the Zynq-7000 portfolio below the -2 and -3 grades. The 400-CSPBGA package supports the Zynq-7000 device's high-density mixed-signal and programmable-logic interface requirements while keeping the assembly compact.
The programmable-logic fabric can implement parallel data paths, custom peripherals, control logic, interface bridges, and hardware accelerators. The Cortex-A9 subsystem can run operating systems and applications, while CoreSight provides integrated debug and trace functions. This division of labor is useful when software handles sequencing and user interfaces and programmable logic handles deterministic acquisition, protocol conversion, or real-time processing.
Typical applications include industrial automation, embedded control gateways, communications infrastructure, test and measurement systems, video or image-processing front ends, and mixed processor-plus-FPGA instruments. The 17 mm by 17 mm package is useful for space-constrained embedded equipment, although a high-pin-count BGA requires careful escape routing, multilayer PCB construction, controlled power delivery, and thermal-management planning.
Designers should validate the CLG400 pinout and power rails against the AMD Zynq-7000 data sheet and UG585 before layout release. Confirm the device speed grade, commercial temperature suffix, supported PS and PL peripherals, memory interfaces, and available I/O for the selected CLG400 variant. Vivado device selection, pin constraints, and the PCB footprint must be synchronized to prevent assignment or escape-routing errors.
This page combines the manufacturer device characteristics, package and pinout references, commercially relevant variants, and practical PCB-planning guidance. It also distinguishes true same-package device options from alternatives that require a different footprint or substantial software and hardware redesign, helping engineers narrow the selection without overlooking migration constraints.
Alternativas directas para XC7Z007S-1CLG400C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC7Z007S-1CLG400C (mismo factor de forma y huella) — difiere en Mounting Type, FPGA Logic Cells, Package, Processor, Product Family.
XC7Z010-1CLG400I
✅ Sustitución directaConsulte el precio
XC7Z014S-1CLG400I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7Z020-1CLG400C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC7Z012S-1CLG400C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC7Z015-1CLG400C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC7Z007S-1CLG400C Valores máximos y características eléctricas
| Product Type | Zynq-7000 all-programmable system on chip |
| Processor | Single ARM Cortex-A9 MPCore |
| Processor Maximum Frequency | 667 MHz |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 |
| Logic Cells | 23K |
| Process Technology | 28 nm |
| Nominal Voltage Class | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| Encapsulado | 400-CSPBGA (17 mm x 17 mm) |
| Package Pin Count | 400 pins |
| Tipo de montaje | Surface-mount ball grid array |
| FPGA Resource Type | Programmable logic |
| Product Family | Zynq-7000 |
| Device Variant | Z-7007S |
Guía de configuración de pines de XC7Z007S-1CLG400C 400 pins
Configuración de pines para XC7Z007S-1CLG400C (encapsulado 400 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC7Z007S-1CLG400C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC7Z007S-1CLG400C es adecuado para 6 aplicacións: Industrial Automation and Embedded Control, Communications Gateway and Protocol Conversion, Test and Measurement Instrumentation, Machine Vision and Image Processing, Data Acquisition and Signal Processing, Secure Network and Edge Systems.
Industrial Automation and Embedded Control
The XC7Z007S-1CLG400C fits compact industrial controllers that coordinate sensors, actuators, communications, and real-time control logic. The ARM Cortex-A9 subsystem at 667 MHz can run networking stacks, control software, and supervisory tasks, while the 23K-cell Artix-7 fabric can implement deterministic timing, I/O expansion, protocol conversion, or hardware data filtering. Using a 400-CSPBGA package at 17 mm by 17 mm helps reduce board area, although multilayer escape routing and careful power delivery remain necessary. The -1 speed grade and commercial C designation suit controlled-environment equipment when the full system meets its required environmental limits.
Recomendado
Communications Gateway and Protocol Conversion
The XC7Z007S-1CLG400C is useful in communications gateways that need a conventional processor environment alongside deterministic hardware interfaces. Its single ARM Cortex-A9 MPCore processor at 667 MHz can manage protocol stacks, configuration, and network services, while the 23K logic cells can accelerate framing, filtering, serialization, or custom interface bridges. The Zynq-7000 architecture reduces the need for separate FPGA-to-processor interconnect around such workloads. For production equipment, engineers should use AMD UG585 and the CLG400 pinout files to confirm the required memory controllers, I/O standards, clock inputs, and PS peripheral availability.
Recomendado
Test and Measurement Instrumentation
The XC7Z007S-1CLG400C supports mixed-signal test equipment that combines instrument control with deterministic acquisition logic. The Cortex-A9 processor can run the user interface, calibration procedures, data analysis, and remote-control functions, while the 23K-cell Artix-7 fabric can implement parallel sampling, trigger logic, counters, or hardware sequencing. The 667 MHz processor supports a practical separation between control-plane software and real-time data processing. The 400-CSPBGA requires a dense multilayer PCB, and engineers should simulate power sequencing, high-speed I/O, thermal rise, and signal integrity before fabrication to maintain measurement performance.
Recomendado
Machine Vision and Image Processing
The XC7Z007S-1CLG400C can serve as the processing core in compact machine-vision or industrial imaging modules. Programmable logic can implement pixel capture, preprocessing, thresholding, and interface timing in parallel, while the 667 MHz ARM Cortex-A9 handles image algorithms, configuration, logging, and communications. The integrated Zynq-7000 architecture reduces latency and board complexity compared with separate processor and FPGA implementations. Its 23K logic cells are appropriate for moderate pipelines rather than very large image arrays, so designers should model LUT, block RAM, DSP, and I/O utilization in Vivado before committing to the device.
Recomendado
Data Acquisition and Signal Processing
The XC7Z007S-1CLG400C is appropriate for multichannel data-acquisition systems that must combine deterministic sampling with embedded analysis. The 23K-cell FPGA fabric can execute parallel filters, decimation, digital conversion, and real-time triggers, while the Cortex-A9 subsystem at 667 MHz manages acquisition control, calibration, storage, and a user-facing application. This mixed architecture is useful when predictable data flow is more important than a general-purpose processor's interrupt latency. Designers should use the official CLG400 ball assignments to plan memory and converter connections and should evaluate DDR routing, decoupling, clock jitter, and thermal performance during schematic capture.
Recomendado
Secure Network and Edge Systems
The XC7Z007S-1CLG400C can serve as the base of an embedded edge-processing node that needs operating-system support and programmable hardware acceleration. The Cortex-A9 processor at 667 MHz can handle application services and control traffic, while the Artix-7 fabric can accelerate packet classification, cryptographic pre-processing, or custom I/O tasks. The 23K logic-cell budget keeps the device suitable for compact, moderate-complexity implementations. For connected equipment, the design must provide the required boot media, memory interface, Ethernet or other communications interfaces, secure boot support, and controlled supply rails. The CLG400 footprint and power design should be validated against AMD's package files before PCB release.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC7Z007S-1CLG400C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC7Z010-1CLG400 | XC7Z014S-1CLG400I | XC7Z020-1CLG400C | XC7Z012S-1CLG400C | XC7Z015-1CLG400C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA |
| Product Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Subsystem | Single ARM Cortex-A9 MPCore | ARM Cortex-A9 MPCore | ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Speed Grade | -1 | -1 | -1 | -1 | -1 | -1 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Diferenciadores clave
- Lower resource target for cost-conscious embedded designs (frente a XC7Z020-1CLG400C)
- Direct CLG400 migration path documented by AMD support (frente a XC7Z010-1CLG400)
- Compact 17 mm by 17 mm mixed-signal package (frente a XC7Z014S-1CLG400I)
Notas de diseño
Construct the XC7Z007S-1CLG400C PCB from the official CLG400 land pattern rather than a generic 400-BGA footprint. Provide multilayer escape routing, preferably through-ball vias or via-in-pad structures where the mechanical design permits. Check drill-to-copper and mask tolerances against the package drawing, and maintain the prescribed solder-mask-defined or non-mask-defined pad geometry. Validate every ball assignment against AMD's package-device pinout CSV before fabrication.
Implement separate PL, PS, and I/O supply rails exactly as specified by the manufacturer, including required sequencing, decoupling, and power-source selection. Place bulk and high-frequency decoupling capacitors at the relevant supply and ground balls with the shortest return path practical. Use the AMD power estimator and device documentation for current limits, then verify startup, steady-state voltage tolerance, and rail interaction in simulation and on hardware before enabling the full fabric and processor load.
Estimate worst-case processor and programmable-logic activity rather than relying on nominal processing speed alone. Account for ambient temperature, PCB copper area, airflow, package construction, and adjacent heat sources when estimating junction temperature. Preserve the recommended thermal land pattern, use through-hole thermal vias where specified, and validate the assembled board with a thermal test. If the temperature estimate approaches the device limit, improve copper spreading or add forced-air cooling before production.
Route memory, clocks, and high-speed I/O as controlled-impedance interfaces using the AMD pinout and board-design guidance. Keep clock sources away from noisy digital and switching-supply regions, provide return paths beneath high-speed lanes, and observe established length-matching rules. Because the 400-CSPBGA offers dense escape routing, review layer transitions, test-point access, and assembly inspection requirements early in schematic and layout development.
Información de cumplimiento
The exact C-suffix ordering code should be checked against AMD's current product compliance documentation. The commercial C designation identifies the temperature grade but does not by itself establish RoHS, REACH, lead-free, or halogen-free status.