XC7Z007S-1CLG400C - 667MHz Zynq-7000 SoC | AMD | 23K
부품 번호: XC7Z007S-1CLG400C ✓ 활성XC7Z007S-1CLG400C 개요
A Zynq-7000 SoC is an FPGA and programmable SoC platform that combines programmable logic with a hard processor subsystem. This integration places the ARM Cortex-A9 processor, CoreSight debug and trace capabilities, programmable logic, memory controllers, and programmable I/O in one package. Compared with a discrete processor-plus-FPGA design, the combined architecture can reduce board space, simplify interconnect, and support hardware-assisted processing alongside Linux-based software control.
The XC7Z007S provides 23K logic cells and a stated operating frequency of 667 MHz. It is manufactured using a 28 nm process and is identified with a 1 V operating-class designation. Its -1 speed grade places it in the Zynq-7000 portfolio below the -2 and -3 grades. The 400-CSPBGA package supports the Zynq-7000 device's high-density mixed-signal and programmable-logic interface requirements while keeping the assembly compact.
The programmable-logic fabric can implement parallel data paths, custom peripherals, control logic, interface bridges, and hardware accelerators. The Cortex-A9 subsystem can run operating systems and applications, while CoreSight provides integrated debug and trace functions. This division of labor is useful when software handles sequencing and user interfaces and programmable logic handles deterministic acquisition, protocol conversion, or real-time processing.
Typical applications include industrial automation, embedded control gateways, communications infrastructure, test and measurement systems, video or image-processing front ends, and mixed processor-plus-FPGA instruments. The 17 mm by 17 mm package is useful for space-constrained embedded equipment, although a high-pin-count BGA requires careful escape routing, multilayer PCB construction, controlled power delivery, and thermal-management planning.
Designers should validate the CLG400 pinout and power rails against the AMD Zynq-7000 data sheet and UG585 before layout release. Confirm the device speed grade, commercial temperature suffix, supported PS and PL peripherals, memory interfaces, and available I/O for the selected CLG400 variant. Vivado device selection, pin constraints, and the PCB footprint must be synchronized to prevent assignment or escape-routing errors.
This page combines the manufacturer device characteristics, package and pinout references, commercially relevant variants, and practical PCB-planning guidance. It also distinguishes true same-package device options from alternatives that require a different footprint or substantial software and hardware redesign, helping engineers narrow the selection without overlooking migration constraints.
드롭인 대체품: XC7Z007S-1CLG400C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z007S-1CLG400C (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, FPGA Logic Cells, Package, Processor, Product Family.
XC7Z014S-1CLG400I
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z020-1CLG400C
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z012S-1CLG400C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z015-1CLG400C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z007S-1CLG400C 최대 정격 & 전기적 특성
| Product Type | Zynq-7000 all-programmable system on chip |
| Processor | Single ARM Cortex-A9 MPCore |
| Processor Maximum Frequency | 667 MHz |
| Debug Support | CoreSight |
| FPGA Family | Artix-7 |
| Logic Cells | 23K |
| Process Technology | 28 nm |
| Nominal Voltage Class | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| 패키지 | 400-CSPBGA (17 mm x 17 mm) |
| Package Pin Count | 400 pins |
| 실장 유형 | Surface-mount ball grid array |
| FPGA Resource Type | Programmable logic |
| Product Family | Zynq-7000 |
| Device Variant | Z-7007S |
XC7Z007S-1CLG400C 400 pins 핀 구성 가이드
XC7Z007S-1CLG400C(400 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7Z007S-1CLG400C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7Z007S-1CLG400C 적합 용도: 6 애플리케이션s: Industrial Automation and Embedded Control, Communications Gateway and Protocol Conversion, Test and Measurement Instrumentation, Machine Vision and Image Processing, Data Acquisition and Signal Processing, Secure Network and Edge Systems.
Industrial Automation and Embedded Control
The XC7Z007S-1CLG400C fits compact industrial controllers that coordinate sensors, actuators, communications, and real-time control logic. The ARM Cortex-A9 subsystem at 667 MHz can run networking stacks, control software, and supervisory tasks, while the 23K-cell Artix-7 fabric can implement deterministic timing, I/O expansion, protocol conversion, or hardware data filtering. Using a 400-CSPBGA package at 17 mm by 17 mm helps reduce board area, although multilayer escape routing and careful power delivery remain necessary. The -1 speed grade and commercial C designation suit controlled-environment equipment when the full system meets its required environmental limits.
추천
Communications Gateway and Protocol Conversion
The XC7Z007S-1CLG400C is useful in communications gateways that need a conventional processor environment alongside deterministic hardware interfaces. Its single ARM Cortex-A9 MPCore processor at 667 MHz can manage protocol stacks, configuration, and network services, while the 23K logic cells can accelerate framing, filtering, serialization, or custom interface bridges. The Zynq-7000 architecture reduces the need for separate FPGA-to-processor interconnect around such workloads. For production equipment, engineers should use AMD UG585 and the CLG400 pinout files to confirm the required memory controllers, I/O standards, clock inputs, and PS peripheral availability.
추천
Test and Measurement Instrumentation
The XC7Z007S-1CLG400C supports mixed-signal test equipment that combines instrument control with deterministic acquisition logic. The Cortex-A9 processor can run the user interface, calibration procedures, data analysis, and remote-control functions, while the 23K-cell Artix-7 fabric can implement parallel sampling, trigger logic, counters, or hardware sequencing. The 667 MHz processor supports a practical separation between control-plane software and real-time data processing. The 400-CSPBGA requires a dense multilayer PCB, and engineers should simulate power sequencing, high-speed I/O, thermal rise, and signal integrity before fabrication to maintain measurement performance.
추천
Machine Vision and Image Processing
The XC7Z007S-1CLG400C can serve as the processing core in compact machine-vision or industrial imaging modules. Programmable logic can implement pixel capture, preprocessing, thresholding, and interface timing in parallel, while the 667 MHz ARM Cortex-A9 handles image algorithms, configuration, logging, and communications. The integrated Zynq-7000 architecture reduces latency and board complexity compared with separate processor and FPGA implementations. Its 23K logic cells are appropriate for moderate pipelines rather than very large image arrays, so designers should model LUT, block RAM, DSP, and I/O utilization in Vivado before committing to the device.
추천
Data Acquisition and Signal Processing
The XC7Z007S-1CLG400C is appropriate for multichannel data-acquisition systems that must combine deterministic sampling with embedded analysis. The 23K-cell FPGA fabric can execute parallel filters, decimation, digital conversion, and real-time triggers, while the Cortex-A9 subsystem at 667 MHz manages acquisition control, calibration, storage, and a user-facing application. This mixed architecture is useful when predictable data flow is more important than a general-purpose processor's interrupt latency. Designers should use the official CLG400 ball assignments to plan memory and converter connections and should evaluate DDR routing, decoupling, clock jitter, and thermal performance during schematic capture.
추천
Secure Network and Edge Systems
The XC7Z007S-1CLG400C can serve as the base of an embedded edge-processing node that needs operating-system support and programmable hardware acceleration. The Cortex-A9 processor at 667 MHz can handle application services and control traffic, while the Artix-7 fabric can accelerate packet classification, cryptographic pre-processing, or custom I/O tasks. The 23K logic-cell budget keeps the device suitable for compact, moderate-complexity implementations. For connected equipment, the design must provide the required boot media, memory interface, Ethernet or other communications interfaces, secure boot support, and controlled supply rails. The CLG400 footprint and power design should be validated against AMD's package files before PCB release.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7Z007S-1CLG400C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7Z010-1CLG400 | XC7Z014S-1CLG400I | XC7Z020-1CLG400C | XC7Z012S-1CLG400C | XC7Z015-1CLG400C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 400-CSPBGA (17 mm x 17 mm) | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA |
| Product Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Processor Subsystem | Single ARM Cortex-A9 MPCore | ARM Cortex-A9 MPCore | ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Speed Grade | -1 | -1 | -1 | -1 | -1 | -1 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
주요 차별점
- Lower resource target for cost-conscious embedded designs (vs XC7Z020-1CLG400C)
- Direct CLG400 migration path documented by AMD support (vs XC7Z010-1CLG400)
- Compact 17 mm by 17 mm mixed-signal package (vs XC7Z014S-1CLG400I)
설계 노트
Construct the XC7Z007S-1CLG400C PCB from the official CLG400 land pattern rather than a generic 400-BGA footprint. Provide multilayer escape routing, preferably through-ball vias or via-in-pad structures where the mechanical design permits. Check drill-to-copper and mask tolerances against the package drawing, and maintain the prescribed solder-mask-defined or non-mask-defined pad geometry. Validate every ball assignment against AMD's package-device pinout CSV before fabrication.
Implement separate PL, PS, and I/O supply rails exactly as specified by the manufacturer, including required sequencing, decoupling, and power-source selection. Place bulk and high-frequency decoupling capacitors at the relevant supply and ground balls with the shortest return path practical. Use the AMD power estimator and device documentation for current limits, then verify startup, steady-state voltage tolerance, and rail interaction in simulation and on hardware before enabling the full fabric and processor load.
Estimate worst-case processor and programmable-logic activity rather than relying on nominal processing speed alone. Account for ambient temperature, PCB copper area, airflow, package construction, and adjacent heat sources when estimating junction temperature. Preserve the recommended thermal land pattern, use through-hole thermal vias where specified, and validate the assembled board with a thermal test. If the temperature estimate approaches the device limit, improve copper spreading or add forced-air cooling before production.
Route memory, clocks, and high-speed I/O as controlled-impedance interfaces using the AMD pinout and board-design guidance. Keep clock sources away from noisy digital and switching-supply regions, provide return paths beneath high-speed lanes, and observe established length-matching rules. Because the 400-CSPBGA offers dense escape routing, review layer transitions, test-point access, and assembly inspection requirements early in schematic and layout development.
규정 준수 정보
The exact C-suffix ordering code should be checked against AMD's current product compliance documentation. The commercial C designation identifies the temperature grade but does not by itself establish RoHS, REACH, lead-free, or halogen-free status.