AMD

XC7Z014S-1CLG484C - 667MHz Zynq-7000 SoC | AMD

N.º de pieza: XC7Z014S-1CLG484C ✓ Activo
484-CSPBGA Package 667 MHz Speed
MOQ: 1 |

XC7Z014S-1CLG484C Descripción general

The AMD XC7Z014S-1CLG484C is a Zynq-7000 adaptive system-on-chip combining a single Arm Cortex-A9 MPCore processor running at 667 MHz with CoreSight debug support and 65K Artix-7 FPGA logic cells in a 484-CSPBGA package measuring 19 mm by 19 mm. The device supports 200 I/O, providing a combination of software programmability and FPGA-based hardware acceleration in one package.

A Zynq-7000 SoC is an adaptive SoC in the FPGA and embedded-processing hierarchy. Unlike a conventional microprocessor or standalone FPGA, it integrates an ARM-based processing system with programmable logic, dedicated peripherals, memory interfaces, and high-speed I/O. This architecture allows software to control the operating environment while designers implement parallel data paths, protocol handling, signal processing, or hardware accelerators directly in the FPGA fabric.

The most prominent product characteristics are the 667 MHz Cortex-A9 processor, 65K logic cells, and 484-CSPBGA package. The single-core processor supports software-oriented control tasks, while the programmable logic provides deterministic parallel operations without a separate FPGA. CoreSight support adds integrated visibility for development and debugging. The package also carries a stated 200 I/O, reducing the need for external interface expansion in designs that use many board-level connections.

The CLG484 implementation uses a 0.8 mm ball-grid pitch and a 19 mm by 19 mm body, making high-density escape routing and multilayer PCB construction important engineering considerations. Although the physical package is compact relative to its processing and logic resources, power delivery, decoupling, DDR routing, and thermal management remain substantial layout tasks. Device configuration, software startup, and Vivado-based hardware implementation form a unified development flow around the SoC.

Typical uses include industrial control gateways, networked embedded systems, video and image processing, communications equipment, data-acquisition systems, and compact edge-computing platforms. In each case, the ARM processor can manage operating-system-level functions while FPGA logic accelerates streaming data, implements custom interfaces, or performs time-critical processing. The combination can reduce board partitioning compared with a design that uses a separate microprocessor and FPGA.

A critical layout consideration is the 0.8 mm BGA pitch. Use the AMD package-pinout resources and the manufacturer's PCB design guidance when assigning power, ground, memory, and high-speed interfaces. Maintain the shortest practical return path for each power rail, provide local high-frequency decoupling at supply pins, and verify the complete stack-up against the selected DDR interface and signal-integrity constraints.

This page combines the exact device identity, package details, source-backed specifications, validated replacement considerations, comparison parameters, and implementation guidance needed to evaluate the XC7Z014S-1CLG484C for a new adaptive-SoC design.

Alternativas directas para XC7Z014S-1CLG484C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con XC7Z014S-1CLG484C (mismo factor de forma y huella) — difiere en Device Type, Processor Core.

AMD
Device Type: Zynq-7000 heterogeneous system-on-chip
Processor Core: 1 x ARM Cortex-A9 MPCore
Comparar con XC7Z014S-1CLG484C →

XC7Z014S-1CLG484I

✅ Sustitución directa ⚠️ Especificaciones sin verificar
AMD
📦 484-CSPBGA
Zynq-7000 heterogeneous system-on-chip · Artix-7 · 1 x ARM Cortex-A9 MPCore · 667 MHz · 65K cells · 484-CSPBGA · 19 mm x 19 mm

Consulte el precio

Ver hoja de datos →

XC7Z014S-1CLG484C4878

✅ Sustitución directa
📦 484-CSPBGA
Uses the same XC7Z014S and CLG484 base configuration; the extended 4878 ordering code changes commercial ordering or marking conditions without changing the 484-ball footprint

📋 Alternativa de referencia (no en el catálogo)

XC7Z014S-1CLG484C Valores máximos y características eléctricas

Device Type Zynq-7000 adaptive system-on-chip with FPGA logic
Processor Core Single-core Arm Cortex-A9 MPCore
Processor Frequency 667 MHz
Debug Support CoreSight
FPGA Logic Cells 65K logic cells
FPGA Family Artix-7
Package Type 484-CSPBGA
Package Body Size 19 mm x 19 mm
Package Pitch 0.8 mm
I/O Count 200 I/O
Architecture Programmable SoC
Logic Resource Quantity 65K cells
Processor Core Count 1 core

Guía de configuración de pines de XC7Z014S-1CLG484C 0.8 mm

Configuración de pines para XC7Z014S-1CLG484C (encapsulado 0.8 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 0.8 mm para XC7Z014S-1CLG484C

No hay datos detallados de patillaje disponibles para XC7Z014S-1CLG484C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC7Z014S-1CLG484C es adecuado para 6 aplicacións: Industrial Control Gateway, Video and Image Processing, Communications Equipment, Precision Data-Acquisition System, Networked Edge Device, Custom Interface and Protocol Bridge.

🏭

Industrial Control Gateway

The XC7Z014S-1CLG484C fits an industrial gateway that must translate between network traffic, local sensors, and actuator commands. Its 667 MHz Cortex-A9 processor can run network services, diagnostics, configuration logic, and supervisory software, while the 65K Artix-7 logic cells can accelerate protocol framing, filtering, or cyclic data handling. The 200 I/O provide substantial connectivity for local interfaces. Using both processing domains in one package reduces the need for a separate FPGA, although the design must reserve logic and I/O for the selected bus widths, clocking, and industrial temperature requirements.

📺

Video and Image Processing

The XC7Z014S-1CLG484C can divide video or image processing between embedded software and FPGA logic. The Arm Cortex-A9 core is suitable for operating-system-level control, parameter management, and system networking, while FPGA logic can implement pixel formatting, thresholding, color conversion, or fixed-function filtering in parallel pipelines. The 65K logic cells allow meaningful hardware acceleration without an external FPGA. Designers should budget logic, block RAM, and external memory bandwidth for the frame rate and resolution, then validate timing through AMD Vivado implementation.

🌐

Communications Equipment

For communications equipment, the XC7Z014S-1CLG484C combines protocol control with FPGA-assisted datapath processing. The 667 MHz Cortex-A9 core can handle packet management, link monitoring, configuration, and higher-layer software, while programmable logic can perform framing, serialization, filtering, or high-speed data movement. Its 200 I/O supports multiple external interfaces, while the CLG484 package reduces inter-board interconnect compared with separate processor and FPGA implementations. Clocking, memory timing, and I/O standards must be assigned early because the 0.8 mm package pitch complicates escape routing.

⚡

Precision Data-Acquisition System

The XC7Z014S-1CLG484C is well suited to data-acquisition systems that need deterministic sampling control alongside higher-level processing. FPGA logic can implement parallel converters, digital filters, trigger logic, and buffering, while the Cortex-A9 processor performs calibration, analysis, storage management, and host communication. The 65K logic-cell and 200 I/O resources provide a useful balance for moderate channel counts. A production design should verify converter interface timing, external-memory bandwidth, clock jitter, and thermal performance under sustained acquisition loads.

🧩

Networked Edge Device

The XC7Z014S-1CLG484C supports compact networked edge devices that combine local control with programmable hardware acceleration. The Cortex-A9 core can run networking, security, monitoring, and application software, while FPGA logic can accelerate local filtering, data reduction, or interface conversion before information is transmitted. Combining these functions in a 484-CSPBGA device reduces board count and shortens the path between control software and real-time logic. A practical design should partition tasks between the processor and fabric, reserve memory bandwidth for concurrent traffic, and validate worst-case startup and thermal behavior.

🔧

Custom Interface and Protocol Bridge

The XC7Z014S-1CLG484C can serve as a custom interface bridge when legacy and modern peripherals must coexist. The processor manages control flow, configuration, and diagnostics, while FPGA logic translates between incompatible widths, timing domains, or framing formats. Its 200 I/O and 65K logic cells provide enough resources for several custom interfaces, subject to the constraints of the selected I/O standards and memory interfaces. Engineers should use the official CLG484 pinout resources, define pin constraints in Vivado, and check bank voltage, clock routing, and timing closure before layout release.

What is the AMD XC7Z014S-1CLG484C?
The AMD XC7Z014S-1CLG484C is a Zynq-7000 adaptive SoC combining one Arm Cortex-A9 MPCore processor, CoreSight debug support, and 65K Artix-7 FPGA logic cells. According to AMD product information, the processor operates at 667 MHz, and the device is packaged in a 19 mm by 19 mm 484-CSPBGA. It is intended for embedded systems that benefit from software control and programmable-logic acceleration on one device.
What are the key specifications of XC7Z014S-1CLG484C?
The XC7Z014S-1CLG484C combines a 667 MHz Arm Cortex-A9 processor with 65K Artix-7 FPGA logic cells in a 484-CSPBGA package. AMD describes 200 I/O, CoreSight debug support, a 19 mm by 19 mm package body, and a 0.8 mm ball-grid pitch. These resources support embedded control, parallel data processing, custom interfaces, and hardware-assisted workloads within one adaptive-SoC device.
Where can I download the XC7Z014S-1CLG484C datasheet and pinout?
The AMD Zynq-7000 package-pinout resource provides the official package files for the CLG484 family, including ASCII and CSV pin data. Use that resource together with the device documentation in Vivado to obtain the authoritative ball assignments and package information. The exact XC7Z014S-1CLG484C ordering information identifies the 484-CSPBGA package, 667 MHz processor, and 65K logic-cell configuration.
What can replace the XC7Z014S-1CLG484C?
The closest same-family candidates are the XC7Z014S-1CLG484I and XC7Z014S-1CLG484C4878, both associated with the CLG484 form factor. The -I ordering code changes the device temperature grade, while the extended ordering code requires confirmation of its temperature and marking conditions. Before replacement, verify the complete ordering code, Vivado target, pinout, and electrical requirements rather than treating the suffix change as automatically interchangeable.
Is XC7Z014S-1CLG484I a drop-in replacement for XC7Z014S-1CLG484C?
The XC7Z014S-1CLG484I uses the same CLG484 package designation and is the closest same-family drop-in candidate identified for the XC7Z014S-1CLG484C. The principal difference is the -I temperature-grade suffix, so the replacement is appropriate when the PCB footprint and device speed grade are unchanged and the wider industrial temperature range is acceptable. Confirm the exact temperature limits and operating requirements in the AMD device documentation.
Is XC7Z014S-1CLG484C the same as XC7Z014S-1CLG400C?
No. The XC7Z014S-1CLG484C uses a 484-CSPBGA package, while the XC7Z014S-1CLG400C uses the different CLG400 package. The CLG484 body measures 19 mm by 19 mm, and the two packages do not provide the same PCB footprint. A direct PCB substitution is therefore not valid; use XC7Z014S-1CLG484I or another explicitly confirmed CLG484 ordering option.
XC7Z014S-1CLG484C vs XC7Z014S-1CLG400I - which package should I choose?
Choose the XC7Z014S-1CLG484C when the board uses a 484-CSPBGA footprint and needs its 200 I/O, 667 MHz Cortex-A9 processor, and 65K logic cells. The XC7Z014S-1CLG400I belongs to the 400-ball package and cannot be soldered onto the same land pattern. Package choice must therefore follow the existing PCB design, while the -I suffix should be considered when a broader temperature grade is required.
When should I choose XC7Z014S-1CLG484C over a standalone FPGA?
Choose the XC7Z014S-1CLG484C when the design needs both an operating-system-capable processor and programmable logic in one package. Its 667 MHz Cortex-A9 core can manage control software, networking, and configuration, while 65K logic cells can implement parallel datapaths or protocol-specific hardware. A standalone FPGA remains preferable when no embedded processor is required and minimizing processor-related complexity is the main design goal.
When should I choose XC7Z014S-1CLG484C over a discrete processor and FPGA?
Choose the XC7Z014S-1CLG484C when board partitioning, interconnect routing, or the number of components can be reduced by integrating the processor and programmable logic. The shared SoC can shorten communication paths between software and hardware, although DDR implementation, power sequencing, and BGA layout become critical design tasks. A discrete solution offers more flexibility when the processor and FPGA must be selected, upgraded, or manufactured independently.
Is the XC7Z014S-1CLG484C suitable for industrial control and data acquisition?
The XC7Z014S-1CLG484C is suitable for industrial control and data-acquisition designs that combine deterministic FPGA processing with an embedded processor. The 65K logic cells can accelerate sampling, filtering, protocol conversion, or parallel I/O, while the 667 MHz Cortex-A9 core handles configuration and supervisory software. For deployments requiring an extended temperature grade, evaluate the XC7Z014S-1CLG484I ordering option.
How many I/O and logic cells does XC7Z014S-1CLG484C provide?
The XC7Z014S-1CLG484C provides 200 I/O and 65K Artix-7 FPGA logic cells according to AMD product descriptions. The processor side consists of one Cortex-A9 MPCore operating at 667 MHz. These figures make the device suitable for board-level control, communications, and streaming-data systems, although the final I/O allocation depends on the selected speed grade, power pins, dedicated functions, and package constraints.
What is the power and thermal design challenge for XC7Z014S-1CLG484C?
The principal thermal design challenge is dissipating processor and FPGA dynamic power from a dense 19 mm by 19 mm, 0.8 mm-pitch BGA package. Although the package provides substantial processing and logic resources in one device, it also concentrates heat generation under the component. Use AMD power and PCB guidance, provide a multilayer thermal path, distribute power and ground connections across the ball field, and validate the design across processor, logic, and I/O activity.
Where to buy XC7Z014S-1CLG484C online?
Use the Request a Quote form on this page to inquire about AMD XC7Z014S-1CLG484C availability, authorized sourcing, and order handling. The exact device combines the CLG484 package, commercial ordering suffix, 667 MHz processor speed, and 65K logic cells, so an RFQ should include the full MPN to prevent substitution with CLG400 or different-temperature-grade variants.
What is the lead time for XC7Z014S-1CLG484C?
The current lead time and available production quantity should be requested through the Request a Quote form on this page. Because the XC7Z014S-1CLG484C is a configurable adaptive-SoC with multiple package and temperature-ordering options, a firm delivery commitment should correspond to the complete MPN. Include the required quantity, date code preference, and target schedule with the inquiry.
Is XC7Z014S-1CLG484C in stock?
Stock status should be confirmed through the Request a Quote form on this page using the complete part number XC7Z014S-1CLG484C. Inventory can differ between the standard CLG484 ordering code and extended or industrial-temperature variants, and the exact suffix matters for procurement. The quote request should specify quantity, production timing, and whether factory-new devices with a date-code preference are required.

Datos de referencia de ingeniería para XC7Z014S-1CLG484C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the XC7Z014S-1CLG484C for a new commercial-temperature design that requires a 667 MHz Arm Cortex-A9 processor, 65K FPGA logic cells, and 200 I/O in one 484-CSPBGA device. It is particularly suitable when software control and deterministic programmable logic can share one PCB footprint and when the board has the routing resources needed for a 0.8 mm BGA. Select the XC7Z014S-1CLG484I when the same CLG484 hardware is needed for an industrial temperature grade. The XC7Z014S-1CLG484C4878 may suit procurement programs requiring its extended ordering code, but its exact environmental conditions should be confirmed before release. Do not substitute the CLG400 devices onto a CLG484 PCB because their ball counts and physical footprints differ.

Comparación con alternativas

Parámetro Este producto XC7Z014S-1CLG484I XC7Z014S-1CLG484C4878
Package 484-CSPBGA, 19 mm x 19 mm 484-CSPBGA 484-CSPBGA
Brand AMD AMD AMD
Device Type Zynq-7000 adaptive SoC Zynq-7000 adaptive SoC Zynq-7000 adaptive SoC
Ordering-Code Difference CLG484 commercial temperature suffix CLG484 industrial temperature suffix CLG484 extended ordering or marking code

Diferenciadores clave

  • Combines embedded processing and programmable logic in one package (frente a XC7Z014S-1CLG484I)
  • Provides 200 I/O for integration of multiple board-level interfaces (frente a XC7Z014S-1CLG484I)
  • Uses a compact 19 mm by 19 mm body while integrating processor and FPGA (frente a XC7Z014S-1CLG484C4878)

Notas de diseño

Design the PCB around the 0.8 mm ball pitch rather than treating the 19 mm square package as a conventional fine-pitch peripheral. Use the AMD CLG484 package files to assign every power, ground, clock, and user I/O ball. Reserve layers for short escape routes, maintain the recommended ball-pad geometry, and avoid long stubs beneath the device. For DDR-connected versions, follow the AMD memory-interface layout guidance for length matching and layer transitions.

Plan the power tree before assigning high-speed I/O because the Cortex-A9 core, FPGA fabric, and I/O banks can create distinct dynamic-current profiles. Provide local bulk and high-frequency decoupling at the relevant supply balls, distribute power and ground connections across the ball field, and separate noisy digital activity from sensitive analog interfaces where practical. Verify voltage sequencing and rail limits against the device configuration, and simulate the power network under worst-case processor and logic utilization.

Concentrated processor and FPGA activity can make the 484-CSPBGA a thermal hotspot even though the package body is only 19 mm by 19 mm. Provide a multilayer PCB thermal path with uninterrupted ground planes beneath the BGA, use through-vias or thermal structures specified by AMD, and avoid placing heat-sensitive components immediately beside the device. Validate estimated and measured junction-temperature behavior at the maximum intended clock, logic utilization, ambient temperature, and enclosure condition.

Clock, memory, and high-speed I/O routing must be planned as a complete constraint set rather than routed independently. Use dedicated clock-capable pins, preserve the package reference topology, specify trace geometry through the stack-up, and apply suitable terminations according to the selected I/O standard. Run post-route timing and signal-integrity checks in Vivado, then inspect eye diagrams or measurements for interfaces whose voltage or data rate makes simulation essential.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this exact ordering code.

Datos verificados el: 2026-11-18 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

xc7z014s 1clg484c xc7z014s 1clg400c xc7z014s 1clg484i xc7z014s 1clg400i xc7z014s 2clg400i XC7Z014S-1CLG484C datasheet XC7Z014S-1CLG484C pinout XC7Z014S-1CLG484C datasheet pdf XC7Z014S-1CLG484C equivalent XC7Z014S-1CLG484C replacement XC7Z014S-1CLG484C footprint AMD XC7Z014S-1CLG484C

Componentes & términos relacionados

AMD Xilinx XC7Z014S-1CLG484C XC7Z014S-1CLG484I XC7Z014S-1CLG484C4878 Zynq-7000 adaptive system-on-chip Artix-7 FPGA Arm Cortex-A9 MPCore CoreSight programmable logic embedded processor FPGA system-on-chip 484-CSPBGA BGA surface mount 667 MHz 65K logic cells 200 I/O 0.8 mm package pitch DDR Vivado industrial control data acquisition
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ