AMD

XC9536XL-7VQG64I - 36-Macrocell 3.3V CPLD | AMD/Xilinx

N.º de pieza: XC9536XL-7VQG64I ✓ Activo
3.0 V to 3.6 V Vdss 64-pin VTQFP Package 125 MHz Speed
MOQ: 1 |

XC9536XL-7VQG64I Descripción general

The AMD/Xilinx XC9536XL-7VQG64I is a 36-macrocell, 3.3 V in-system-programmable CPLD with 36 user I/O pins, approximately 800 usable gates, and a 64-pin VTQFP package. Its -7 speed designation corresponds to a maximum propagation delay of 7.5 ns, supporting general-purpose glue logic, control logic, interface adaptation, and legacy industrial system designs.

A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks with I/O structures. It occupies the broader hierarchy of programmable logic devices, alongside FPGAs, and is used to implement fixed or configurable digital functions. The XC9500XL architecture provides nonvolatile configuration, in-system programmability, and repeatable programming suitable for established control and interface products.

The device provides 36 macrocells, 36 user I/O pins, and about 800 usable gates. Its architecture uses 54V18 function blocks and drives I/O blocks directly from the function-block outputs. In-system programmability supports at least 10,000 program and erase cycles, while enhanced pin-locking capability helps preserve board-level routing assignments during design migration within the XC9500XL family.

The XC9500XL family uses 0.35 µm CMOS technology and operates from a 3.0 V to 3.6 V supply range. The XC9536XL-7VQG64I is identified as an industrial-grade variant in a 64-pin VTQFP package. The G package designation denotes a lead-free package, and product listings identify the device as RoHS compliant. Programmable transition behavior permits specified transient overshoot and undershoot during device state changes when the relevant duration and current limits are respected.

Typical applications include industrial automation, embedded control, legacy peripheral control, programmable interface logic, board-level glue logic, and system power-sequencing support. Its 36 I/O pins make it useful where several digital lines must be routed among processors, memory devices, sensors, and communications interfaces while retaining a compact, nonvolatile logic implementation.

Designers should preserve the device's 3.3 V supply assumptions and verify every signal against the XC9536XL DS058 pin table before PCB release. Use the manufacturer pinout and power-decoupling recommendations, connect the programming interface according to the defined JTAG or boundary-scan arrangement, and validate timing with the speed grade used in the original design. The -7 variant provides a 7.5 ns maximum propagation delay.

This page combines the key family-level specifications, practical implementation guidance, same-footprint upgrade paths, and engineering trade-offs for engineers evaluating the XC9536XL-7VQG64I or planning a controlled migration to another XC9536XL speed, package, or temperature option.

Alternativas directas para XC9536XL-7VQG64I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con XC9536XL-7VQG64I (mismo factor de forma y huella) — difiere en Package, Usable Gates, Device Type, Lead-Free Status, Number of Macrocells.

AMD
Package: 64-pin VQFP
Usable Gates: 800 gates
Device Type: Complex Programmable Logic Device (CPLD)
Comparar con XC9536XL-7VQG64I →
AMD
Package: 64-pin VTQFP, 10 mm x 10 mm
Usable Gates: 800
Device Type: Complex Programmable Logic Device (CPLD)
Comparar con XC9536XL-7VQG64I →

XC9536XL-7VQ64C

✅ Sustitución directa
AMD
📦 64-pin VTQFP
Complex Programmable Logic Device (CPLD) · In-System Programmable · Minimum 10,000 cycles · 36 macrocells · 36 I/O · 2 54V18 function blocks · 800 gates · 7.5 ns

Consulte el precio

Ver hoja de datos →

XC9536XL-7VQG64C

✅ Sustitución directa
AMD
📦 64-pin VTQFP
Complex Programmable Logic Device (CPLD) · FastFLASH XC9500XL · 36 · 36 · 800 · 125 MHz · 7.5 ns · 5 ns

Consulte el precio

Ver hoja de datos →

XC9536XL-10VQG64I

✅ Sustitución directa
📦 64-pin VTQFP
Retains the industrial VQG64 configuration and 64-pin footprint, while propagation delay changes from 7.5 ns to 10 ns, approximately 33% slower.

📋 Alternativa de referencia (no en el catálogo)

XC9536XL-10VQ64C

✅ Sustitución directa
AMD
📦 64-pin VTQFP
Complex programmable logic device (CPLD) · XC9500XL high-performance CPLD · 36 macrocells · 800 gates · 100 MHz · 10 ns · 3.3 V · 0.35 µm CMOS

Consulte el precio

Ver hoja de datos →

XC9536XL-5VQ64C

✅ Sustitución directa
📦 64-pin VTQFP
Uses the same 64-pin VTQFP footprint and improves propagation delay from 7.5 ns to 5 ns, approximately 33% faster, but is commercial grade.

📋 Alternativa de referencia (no en el catálogo)

XC9536XL-7VQG64I Valores máximos y características eléctricas

Device Type In-System Programmable CPLD
Architecture XC9500XL
Number of Macrocells 36 macrocells
Number of User I/O Pins 36 pins
Usable Gates Approximately 800 gates
Function Blocks 54V18
Maximum Propagation Delay 7.5 ns
Architecture Logic Delay 5 ns pin-to-pin
Supply Voltage Range 3.0 V to 3.6 V
Nominal Supply Voltage 3.3 V
Technology 0.35 µm CMOS
Programmable Type In-System Programmable
Minimum Program/Erase Endurance 10,000 cycles
Encapsulado 64-pin VTQFP
Temperature Grade Industrial
Lead-Free Status Lead Free
Estado RoHS RoHS Compliant
Maximum Family Frequency 125 MHz
Pin-Locking Enhanced pin-locking capability

Guía de configuración de pines de XC9536XL-7VQG64I 64-pin vtqfp

Configuración de pines para XC9536XL-7VQG64I (encapsulado 64-pin vtqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 64-pin vtqfp para XC9536XL-7VQG64I

No hay datos detallados de patillaje disponibles para XC9536XL-7VQG64I.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XC9536XL-7VQG64I es adecuado para 6 aplicacións: Industrial Automation Control, Legacy Processor Interface Logic, Sensor and Actuator Signal Conditioning, Programmable Peripheral Interconnect, Board-Level Power Sequencing, Communication Interface Adaptation.

🏭

Industrial Automation Control

The AMD/Xilinx XC9536XL-7VQG64I fits industrial automation boards that need deterministic nonvolatile glue logic around a controller. Its 36 macrocells and 36 user I/O pins can implement sequencing, interlock, alarm, and signal-conditioning functions without loading the main processor. The 7.5 ns propagation delay provides useful timing margin for ordinary control paths, while the industrial ordering code supports deployment in equipment subject to extended ambient conditions. Designers should use DS058 timing tables to confirm every path and preserve the 3.0 V to 3.6 V supply range.

🔧

Legacy Processor Interface Logic

The XC9536XL-7VQG64I can implement address decoding, bus arbitration, interrupt routing, and peripheral-select functions around a legacy microprocessor. Thirty-six user I/O pins provide enough connectivity for several control buses and discrete status signals, while 800 usable gates accommodate multiple modest logic functions. The 7.5 ns maximum propagation delay is suitable for many non-FFT control paths, but synchronous interfaces require full setup and hold analysis against the selected clock. Enhanced pin locking also helps retain board-level assignments during family migration.

🧩

Sensor and Actuator Signal Conditioning

In sensor and actuator interfaces, the XC9536XL-7VQG64I can combine input qualification, command decoding, isolation boundaries, and fault-latching functions. Its 36 I/O pins allow several sensors or discrete actuators to share a common control structure, while nonvolatile in-system programming supports field updates through the system programming interface. The industrial-grade target is suitable for robust control electronics, but external level translation and protection may still be required for sensors outside the 3.3 V logic domain. Validate every transition against the DS058 electrical characteristics.

⚡

Programmable Peripheral Interconnect

The XC9536XL-7VQG64I is useful for legacy boards that need selectable peripheral routing without redesigning a processor's pin multiplexing. Its 36 macrocells can implement programmable enables, mux logic, interrupt sharing, and data-path selection around multiple peripheral devices. In-system programmability with at least 10,000 program and erase cycles allows configuration changes during manufacturing or field maintenance. The 7.5 ns grade should be checked against peripheral setup times, and board changes should preserve the manufacturer's package outline and exposed thermal considerations.

🔋

Board-Level Power Sequencing

The XC9536XL-7VQG64I can implement deterministic power-up sequences, control-enable interlocks, reset coordination, and supply monitoring logic for multi-rail industrial equipment. Thirty-six macrocells provide capacity for several sequencing states and diagnostic outputs, while nonvolatile configuration preserves the sequence after power cycling. Because the CPLD itself is a 3.3 V device, its supply sequencing must be designed around the rails used by the surrounding logic. Timing analysis should include every rail-enable path and distinguish external power-control components from the CPLD's own supply requirements.

🌐

Communication Interface Adaptation

The XC9536XL-7VQG64I can adapt legacy communication lines by generating chip selects, modem-control signals, interrupt qualifiers, and protocol state-machine support. Its 36 user I/O pins and 800 usable gates are sufficient for several moderate-speed control functions without replacing a higher-cost FPGA. The 5 ns architecture delay and 7.5 ns maximum propagation delay suit many asynchronous control paths, although high-speed data lanes require separate timing verification. In-system programmability allows protocol modes to be updated without replacing the board.

What are the key specifications of XC9536XL-7VQG64I that engineers should know?
The XC9536XL-7VQG64I is a 3.3 V, 36-macrocell CPLD with 36 user I/O pins, approximately 800 usable gates, and a 64-pin VTQFP package. According to the AMD DS058 XC9536XL datasheet, the -7 grade has a 7.5 ns maximum propagation delay, while the device supports in-system programming with at least 10,000 program and erase cycles. Its industrial temperature designation and 3.0 V to 3.6 V operating range suit established industrial control and interface applications.
Where can I download the XC9536XL-7VQG64I datasheet PDF?
The authoritative XC9536XL-7VQG64I datasheet is AMD document DS058, titled XC9536XL High Performance CPLD. Use the AMD documentation link on this page for the manufacturer-controlled copy, and use the Mouser-hosted DS058 PDF only as a mirror. The document covers the XC9500XL architecture, 54V18 function blocks, I/O behavior, programming, timing, and package details needed for design review and PCB verification.
Where can I find the XC9536XL pinout for the 64-pin VTQFP?
The XC9536XL pinout is presented in the DS058 pin-description and package diagrams published by AMD. The XC9536XL-7VQG64I uses the 64-pin VTQFP outline, and each of its 36 user I/O pins is assigned through the programmable architecture. Use the exact ordering and signal descriptions in DS058 when assigning PCB nets; do not rely on a generic 64-pin diagram from another XC9500XL package.
Is XC9536XL-7VQG64I suitable for industrial control and automation systems?
Yes. The XC9536XL-7VQG64I is identified as an industrial-grade 3.3 V CPLD with 36 macrocells, 36 user I/O pins, and a 7.5 ns maximum propagation delay. These resources suit board-level sequencing, sensor and actuator interface logic, legacy processor glue, and protocol adaptation. The device is a 0.35 µm CMOS design, so designers of new high-volume systems should also evaluate current AMD or Lattice logic families against cost, tool support, and lifecycle expectations.
What can replace the XC9536XL-7VQG64I without changing its PCB footprint?
The XC9536XL-7VQ64C and XC9536XL-7VQG64C are direct same-footprint alternatives because they retain the 64-pin VTQFP outline and -7 timing grade, although their commercial temperature designation differs from the target industrial part. The XC9536XL-10VQG64I preserves the industrial-grade VQG64 configuration but changes the speed grade from -7 to -10. Confirm pinout, temperature requirements, timing closure, and programming-file compatibility before substitution.
Is XC9536XL-7VQG64I the same as XC9536XL-7VQ64C?
The XC9536XL-7VQG64I and XC9536XL-7VQ64C use the same 64-pin VTQFP family and -7 speed designation, but their ordering codes indicate different temperature options. The target is the VQG64I industrial variant, while XC9536XL-7VQ64C is a commercial-grade ordering option. They are therefore PCB drop-in choices at the package and timing level, but the XC9536XL-7VQ64C should not replace the industrial part where the ambient-temperature requirement exceeds the commercial grade.
When should I choose XC9536XL-7VQG64I over XC9536XL-10VQG64I?
Choose XC9536XL-7VQG64I when the design needs the faster -7 timing grade, with a maximum propagation delay of 7.5 ns, while retaining the industrial VQG64 configuration. Choose XC9536XL-10VQG64I when the original design does not require the extra timing margin or when its broader availability is preferable. The 10 ns grade is approximately 33% slower than the 7.5 ns grade and should be revalidated against every setup, hold, and clock requirement.
When should I choose XC9536XL-7VQG64I over XC9536XL-5VQ64C?
Choose XC9536XL-7VQG64I when the board requires industrial-temperature qualification and does not need the faster -5 timing grade. The XC9536XL-5VQ64C has a 5 ns maximum propagation delay compared with 7.5 ns for the target, but it uses the commercial Q64C ordering code. Use the -5 option only when its timing advantage is necessary and the environmental rating remains acceptable for the deployment.
What is the difference between XC9536XL-7VQG64I and XC9536XL-7VQ64C?
Both devices use a 64-pin VTQFP package and the -7 speed grade, so their physical footprint and nominal timing class are the same. The primary ordering-code distinction is temperature grade: the target carries the I industrial suffix, while XC9536XL-7VQ64C carries the C commercial suffix. According to AMD family documentation, the XC9500XL devices share the architecture and enhanced pin-locking behavior, but the replacement must satisfy the original product's environmental requirements.
Where can I buy XC9536XL-7VQG64I and check current availability?
Use the Request a Quote form on this page to request the exact XC9536XL-7VQG64I ordering code, current stock, lead time, and quantity breaks. Confirm that the quotation specifies the industrial 64-pin VTQFP variant rather than the closely related commercial or 44-pin versions. Packaging and date-code requirements should be included in the request because ordering-code differences can change grade, lead-free status, and RoHS classification.
How much does XC9536XL-7VQG64I cost?
The current unit price for XC9536XL-7VQG64I is best obtained through the Request a Quote form on this page because this part is an older programmable-logic catalog item with changing availability and order quantities. Submit the required quantity, package preference, and target date so the commercial team can return an exact quotation. Do not substitute a price for a different speed grade, temperature suffix, or 44-pin package.
What is the lead time for XC9536XL-7VQG64I?
The current lead time for XC9536XL-7VQG64I should be requested through the Request a Quote form on this page with the required quantity and target delivery date. Because availability can differ among the industrial VQG64I, commercial VQ64C, slower 10-grade, and 44-pin variants, the ordering code must remain unchanged throughout the quotation. For new production designs, request longevity and last-time-buy information as part of the same review.
Is XC9536XL-7VQG64I currently in stock?
Stock status for the exact XC9536XL-7VQG64I is shown through the Request a Quote process on this page rather than through a fixed status label. Include the required quantity, authorized sourcing channel, and acceptable manufacturing date in the request. This avoids confusing the target with XC9536XL-10VQG64I, XC9536XL-7VQ64C, XC9536XL-7VQG44I, or other members of the broader XC9536XL family.
How does the -7 speed grade affect XC9536XL-7VQG64I timing?
The -7 speed grade specifies a 7.5 ns maximum propagation delay for the XC9536XL-7VQG64I, making it faster than the -10 grade but slower than the -5 grade. According to the AMD DS058 datasheet, the architecture also includes 5 ns pin-to-pin logic-delay characteristics for supported paths. Timing analysis must use the complete datasheet tables for the selected path rather than treating the grade suffix as a universal clock-frequency rating.
What programming features does XC9536XL-7VQG64I support?
The XC9536XL-7VQG64I supports in-system programmability and at least 10,000 program and erase cycles. Nonvolatile configuration allows the CPLD to retain its programmed logic without a continuously operating configuration device. The AMD DS058 datasheet also describes enhanced pin-locking capability, which helps preserve board routing assignments when migrating among compatible XC9500XL family members.

Datos de referencia de ingeniería para XC9536XL-7VQG64I — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the XC9536XL-7VQG64I when maintaining an industrial-grade, 3.3 V CPLD design that requires the 64-pin VTQFP footprint and a 7.5 ns maximum propagation delay. Select XC9536XL-7VQG64C or XC9536XL-7VQ64C for commercial-temperature applications where the -7 timing grade is sufficient. Use XC9536XL-10VQG64I when industrial temperature is required but the 10 ns timing grade still closes the design; it is approximately 33% slower and must be revalidated. Choose XC9536XL-5VQ64C when its 5 ns timing grade provides necessary margin and commercial temperature is acceptable. All listed alternatives retain the same package family, but none should replace the target without checking voltage levels, environmental requirements, programming support, timing, and availability.

Comparación con alternativas

Parámetro Este producto XC9536XL-7VQ64C XC9536XL-7VQG64C XC9536XL-10VQG64I XC9536XL-10VQ64C XC9536XL-5VQ64C
Brand AMD AMD AMD AMD AMD AMD
Package 64-pin VTQFP 64-pin VTQFP - same 64-pin VTQFP - same 64-pin VTQFP - same 64-pin VTQFP - same 64-pin VTQFP - same
Device Architecture XC9500XL XC9500XL XC9500XL XC9500XL XC9500XL XC9500XL
Number of Macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells
Number of User I/O Pins 36 pins 36 pins 36 pins 36 pins 36 pins 36 pins
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V
Speed Grade -7, 7.5 ns maximum propagation delay -7, 7.5 ns maximum propagation delay -7, 7.5 ns maximum propagation delay -10, 10 ns maximum propagation delay -10, 10 ns maximum propagation delay -5, 5 ns maximum propagation delay
Temperature Grade Industrial Commercial Commercial Industrial Commercial Commercial
Usable Gates Approximately 800 gates Approximately 800 gates Approximately 800 gates Approximately 800 gates Approximately 800 gates Approximately 800 gates
Programmable Type In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable

Diferenciadores clave

  • Industrial-grade option within the 64-pin XC9536XL footprint (frente a XC9536XL-7VQ64C)
  • Faster -7 timing grade than the 10 ns replacement (frente a XC9536XL-10VQG64I)
  • Lower propagation delay than the -5 alternative (frente a XC9536XL-5VQ64C)
  • Direct 64-pin package compatibility across speed grades (frente a XC9536XL-10VQ64C)

Notas de diseño

Do not substitute by macrocell count alone: the package code, speed grade, temperature suffix, and lead-free status must all match the PCB requirement. The target uses the 64-pin VTQFP and -7 grade. XC9536XL-7VQ64C preserves the package and speed but is a commercial-grade ordering option, while XC9536XL-10VQG64I preserves industrial grade but increases propagation delay from 7.5 ns to 10 ns. Re-run static timing analysis after every substitution.

Use the AMD DS058 package drawing and pin-description table to assign all 64 VTQFP positions. Keep the 3.3 V supply path short, place the required bypass capacitance at the power pins, and provide a clean return path beneath or adjacent to the device according to the package recommendations. Because the family uses a 64-pin square surface-mount outline, verify courtyard clearance and soldering-profile requirements rather than using dimensions from a generic QFP drawing.

Validate every external interface against the DS058 AC and DC timing tables rather than using the 125 MHz family figure as a guaranteed operating frequency. The -7 grade is defined by a 7.5 ns maximum propagation delay, while the architecture includes 5 ns pin-to-pin logic-delay characteristics. Check setup and hold requirements, use controlled clock routing where necessary, and avoid substituting the -10 grade without repeating worst-case timing analysis.

The XC9536XL-7VQG64I operates from a 3.0 V to 3.6 V supply and therefore must not be connected to 5 V I/O or a 5 V core without an appropriate interface or level-shifting design. Confirm the voltage associated with each board signal, especially when migrating legacy 5 V systems. External buffers, translators, or redesign of the affected I/O path may be required even when the CPLD footprint remains unchanged.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The target is identified as lead-free and RoHS compliant. It is an industrial CPLD ordering option rather than an AEC-Q100 automotive-qualified variant. REACH, halogen-free status, and conflict-minerals status are not stated.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

xc9536xl datasheet xc9536xl pinout xc9536xl 7vqg44c xc9536xl 10vqg44c xc9536xl 10vqg44i XC9536XL-7VQG64I datasheet XC9536XL-7VQG64I pinout XC9536XL-7VQG64I specifications XC9536XL-7VQG64I equivalent XC9536XL-7VQG64I replacement XC9536XL-7VQG64I price XC9536XL-7VQG64I stock AMD XC9536XL-7VQG64I XC9536XL-7VQG64I vs XC9536XL-10VQG64I

Componentes & términos relacionados

AMD Xilinx XC9536XL-7VQG64I XC9536XL-7VQ64C XC9536XL-7VQG64C XC9536XL-10VQG64I XC9536XL-10VQ64C XC9536XL-5VQ64C XC9500XL CPLD complex programmable logic device programmable logic device FPGA semiconductor macrocell 54V18 function block in-system programmability nonvolatile configuration enhanced pin locking 3.3 V 0.35 µm CMOS VTQFP QFP package family surface-mount package industrial automation programmable peripheral interconnect RoHS AEC-Q100 propagation delay
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ