XC9536XL-7VQG64I - 36-Macrocell 3.3V CPLD | AMD/Xilinx
部品番号: XC9536XL-7VQG64I ✓ 生産中XC9536XL-7VQG64I 概要
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks with I/O structures. It occupies the broader hierarchy of programmable logic devices, alongside FPGAs, and is used to implement fixed or configurable digital functions. The XC9500XL architecture provides nonvolatile configuration, in-system programmability, and repeatable programming suitable for established control and interface products.
The device provides 36 macrocells, 36 user I/O pins, and about 800 usable gates. Its architecture uses 54V18 function blocks and drives I/O blocks directly from the function-block outputs. In-system programmability supports at least 10,000 program and erase cycles, while enhanced pin-locking capability helps preserve board-level routing assignments during design migration within the XC9500XL family.
The XC9500XL family uses 0.35 µm CMOS technology and operates from a 3.0 V to 3.6 V supply range. The XC9536XL-7VQG64I is identified as an industrial-grade variant in a 64-pin VTQFP package. The G package designation denotes a lead-free package, and product listings identify the device as RoHS compliant. Programmable transition behavior permits specified transient overshoot and undershoot during device state changes when the relevant duration and current limits are respected.
Typical applications include industrial automation, embedded control, legacy peripheral control, programmable interface logic, board-level glue logic, and system power-sequencing support. Its 36 I/O pins make it useful where several digital lines must be routed among processors, memory devices, sensors, and communications interfaces while retaining a compact, nonvolatile logic implementation.
Designers should preserve the device's 3.3 V supply assumptions and verify every signal against the XC9536XL DS058 pin table before PCB release. Use the manufacturer pinout and power-decoupling recommendations, connect the programming interface according to the defined JTAG or boundary-scan arrangement, and validate timing with the speed grade used in the original design. The -7 variant provides a 7.5 ns maximum propagation delay.
This page combines the key family-level specifications, practical implementation guidance, same-footprint upgrade paths, and engineering trade-offs for engineers evaluating the XC9536XL-7VQG64I or planning a controlled migration to another XC9536XL speed, package, or temperature option.
ドロップイン代替品: XC9536XL-7VQG64I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC9536XL-7VQG64I (同一形状・フットプリント) — 相違点: Package, Usable Gates, Device Type, Lead-Free Status, Number of Macrocells.
XC9536XL-7VQ64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9536XL-7VQG64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9536XL-10VQG64I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC9536XL-10VQ64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9536XL-5VQ64C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC9536XL-7VQG64I 最大定格&電気的特性
| Device Type | In-System Programmable CPLD |
| Architecture | XC9500XL |
| Number of Macrocells | 36 macrocells |
| Number of User I/O Pins | 36 pins |
| Usable Gates | Approximately 800 gates |
| Function Blocks | 54V18 |
| Maximum Propagation Delay | 7.5 ns |
| Architecture Logic Delay | 5 ns pin-to-pin |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Technology | 0.35 µm CMOS |
| Programmable Type | In-System Programmable |
| Minimum Program/Erase Endurance | 10,000 cycles |
| パッケージ | 64-pin VTQFP |
| Temperature Grade | Industrial |
| Lead-Free Status | Lead Free |
| RoHS ステータス | RoHS Compliant |
| Maximum Family Frequency | 125 MHz |
| Pin-Locking | Enhanced pin-locking capability |
XC9536XL-7VQG64I 64-pin vtqfp ピン配置ガイド
XC9536XL-7VQG64I (64-pin vtqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC9536XL-7VQG64I.
詳細は データシート をご参照ください。
主な用途
XC9536XL-7VQG64I の用途: 6 件s: Industrial Automation Control, Legacy Processor Interface Logic, Sensor and Actuator Signal Conditioning, Programmable Peripheral Interconnect, Board-Level Power Sequencing, Communication Interface Adaptation.
Industrial Automation Control
The AMD/Xilinx XC9536XL-7VQG64I fits industrial automation boards that need deterministic nonvolatile glue logic around a controller. Its 36 macrocells and 36 user I/O pins can implement sequencing, interlock, alarm, and signal-conditioning functions without loading the main processor. The 7.5 ns propagation delay provides useful timing margin for ordinary control paths, while the industrial ordering code supports deployment in equipment subject to extended ambient conditions. Designers should use DS058 timing tables to confirm every path and preserve the 3.0 V to 3.6 V supply range.
おすすめ
Legacy Processor Interface Logic
The XC9536XL-7VQG64I can implement address decoding, bus arbitration, interrupt routing, and peripheral-select functions around a legacy microprocessor. Thirty-six user I/O pins provide enough connectivity for several control buses and discrete status signals, while 800 usable gates accommodate multiple modest logic functions. The 7.5 ns maximum propagation delay is suitable for many non-FFT control paths, but synchronous interfaces require full setup and hold analysis against the selected clock. Enhanced pin locking also helps retain board-level assignments during family migration.
おすすめ
Sensor and Actuator Signal Conditioning
In sensor and actuator interfaces, the XC9536XL-7VQG64I can combine input qualification, command decoding, isolation boundaries, and fault-latching functions. Its 36 I/O pins allow several sensors or discrete actuators to share a common control structure, while nonvolatile in-system programming supports field updates through the system programming interface. The industrial-grade target is suitable for robust control electronics, but external level translation and protection may still be required for sensors outside the 3.3 V logic domain. Validate every transition against the DS058 electrical characteristics.
おすすめ
Programmable Peripheral Interconnect
The XC9536XL-7VQG64I is useful for legacy boards that need selectable peripheral routing without redesigning a processor's pin multiplexing. Its 36 macrocells can implement programmable enables, mux logic, interrupt sharing, and data-path selection around multiple peripheral devices. In-system programmability with at least 10,000 program and erase cycles allows configuration changes during manufacturing or field maintenance. The 7.5 ns grade should be checked against peripheral setup times, and board changes should preserve the manufacturer's package outline and exposed thermal considerations.
おすすめ
Board-Level Power Sequencing
The XC9536XL-7VQG64I can implement deterministic power-up sequences, control-enable interlocks, reset coordination, and supply monitoring logic for multi-rail industrial equipment. Thirty-six macrocells provide capacity for several sequencing states and diagnostic outputs, while nonvolatile configuration preserves the sequence after power cycling. Because the CPLD itself is a 3.3 V device, its supply sequencing must be designed around the rails used by the surrounding logic. Timing analysis should include every rail-enable path and distinguish external power-control components from the CPLD's own supply requirements.
おすすめ
Communication Interface Adaptation
The XC9536XL-7VQG64I can adapt legacy communication lines by generating chip selects, modem-control signals, interrupt qualifiers, and protocol state-machine support. Its 36 user I/O pins and 800 usable gates are sufficient for several moderate-speed control functions without replacing a higher-cost FPGA. The 5 ns architecture delay and 7.5 ns maximum propagation delay suit many asynchronous control paths, although high-speed data lanes require separate timing verification. In-system programmability allows protocol modes to be updated without replacing the board.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC9536XL-7VQG64I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC9536XL-7VQ64C | XC9536XL-7VQG64C | XC9536XL-10VQG64I | XC9536XL-10VQ64C | XC9536XL-5VQ64C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 64-pin VTQFP | 64-pin VTQFP - same | 64-pin VTQFP - same | 64-pin VTQFP - same | 64-pin VTQFP - same | 64-pin VTQFP - same |
| Device Architecture | XC9500XL | XC9500XL | XC9500XL | XC9500XL | XC9500XL | XC9500XL |
| Number of Macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| Number of User I/O Pins | 36 pins | 36 pins | 36 pins | 36 pins | 36 pins | 36 pins |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Speed Grade | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -10, 10 ns maximum propagation delay | -10, 10 ns maximum propagation delay | -5, 5 ns maximum propagation delay |
| Temperature Grade | Industrial | Commercial | Commercial | Industrial | Commercial | Commercial |
| Usable Gates | Approximately 800 gates | Approximately 800 gates | Approximately 800 gates | Approximately 800 gates | Approximately 800 gates | Approximately 800 gates |
| Programmable Type | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
主な差別化要因
- Industrial-grade option within the 64-pin XC9536XL footprint (vs XC9536XL-7VQ64C)
- Faster -7 timing grade than the 10 ns replacement (vs XC9536XL-10VQG64I)
- Lower propagation delay than the -5 alternative (vs XC9536XL-5VQ64C)
- Direct 64-pin package compatibility across speed grades (vs XC9536XL-10VQ64C)
設計ノート
Do not substitute by macrocell count alone: the package code, speed grade, temperature suffix, and lead-free status must all match the PCB requirement. The target uses the 64-pin VTQFP and -7 grade. XC9536XL-7VQ64C preserves the package and speed but is a commercial-grade ordering option, while XC9536XL-10VQG64I preserves industrial grade but increases propagation delay from 7.5 ns to 10 ns. Re-run static timing analysis after every substitution.
Use the AMD DS058 package drawing and pin-description table to assign all 64 VTQFP positions. Keep the 3.3 V supply path short, place the required bypass capacitance at the power pins, and provide a clean return path beneath or adjacent to the device according to the package recommendations. Because the family uses a 64-pin square surface-mount outline, verify courtyard clearance and soldering-profile requirements rather than using dimensions from a generic QFP drawing.
Validate every external interface against the DS058 AC and DC timing tables rather than using the 125 MHz family figure as a guaranteed operating frequency. The -7 grade is defined by a 7.5 ns maximum propagation delay, while the architecture includes 5 ns pin-to-pin logic-delay characteristics. Check setup and hold requirements, use controlled clock routing where necessary, and avoid substituting the -10 grade without repeating worst-case timing analysis.
The XC9536XL-7VQG64I operates from a 3.0 V to 3.6 V supply and therefore must not be connected to 5 V I/O or a 5 V core without an appropriate interface or level-shifting design. Confirm the voltage associated with each board signal, especially when migrating legacy 5 V systems. External buffers, translators, or redesign of the affected I/O path may be required even when the CPLD footprint remains unchanged.
コンプライアンス情報
The target is identified as lead-free and RoHS compliant. It is an industrial CPLD ordering option rather than an AEC-Q100 automotive-qualified variant. REACH, halogen-free status, and conflict-minerals status are not stated.