AMD

XCKU040-L1FFVA1156I - Kintex UltraScale FPGA, 520 I/O | AMD

N.º de pieza: XCKU040-L1FFVA1156I ✓ Activo
1156-ball FCBGA (FFVA1156) Package -1L (can operate at 0.95 V or 0.90 V VCCINT) Speed
MOQ: 1 |

XCKU040-L1FFVA1156I Descripción general

The AMD Xilinx XCKU040-L1FFVA1156I is a Kintex UltraScale field programmable gate array (FPGA) built on the 20 nm UltraScale process, providing 530,250 logic cells, 30,300 CLB/LAB blocks, 21,606,000 bits of block RAM and 520 user I/O in a 1156-ball FCBGA package. The -1L speed grade device can be operated at either a 0.95 V or 0.90 V VCCINT setting, and it is screened for lower maximum static power than the -1 grade.

An FPGA is a programmable semiconductor whose logic, memory and I/O resources are configured by a bitstream loaded at power-up. The Kintex UltraScale family sits between the lower-cost Zynq UltraScale devices and the higher-end Virtex UltraScale devices, and it is built on the UltraScale architecture that uses ASIC-class ASIC-style logic cells (ASIC = application-specific integrated circuit). The 20 nm node delivers high logic density, next-generation memory resources and low-cost packaging compared with earlier-generation 7 series devices.

Key device resources include 21.4 Mb of block RAM, 520 selectable I/O pins, DSP48E2 blocks for fixed-point and floating-point signal processing, transceivers for high-speed serial links, and dedicated clock management with PLL and MMCM primitives. The UltraScale architecture adds features such as the UltraScale SelectIO resources, memory interconnect improvements, and the ability to split large designs into multiple floorplanned partitions for improved timing closure and parallel implementation.

The -1L grade targets mid-speed designs where energy efficiency matters more than maximum clock frequency. Because the L-grade can run its core logic at 0.90 V as well as 0.95 V, designers can trade core voltage for dynamic power reduction on designs that do not need the highest Fmax. A full 1156-ball FCBGA package on a 29 mm x 29 mm substrate supports very high pin counts and dense board-level escape routing, and the exposed thermal structure demands careful PCB thermal design.

Typical uses include 5G and wireless baseband prototyping, radar and RF signal processing, high-speed data acquisition, industrial video and machine-vision pipelines, high-bandwidth cryptography accelerators, and test-and-measurement front ends. The large I/O count and abundant block RAM make it a common fit for prototype boards that expose multiple high-speed lanes and DDR memory interfaces.

When designing around this device, plan the power tree for the separate VCCINT, VCCBRAM, VCCAUX and VCCO rails, verify that your board provides the correct decoupling network, and confirm the speed grade and temperature suffix against the exact ordering code before committing to a build. Use the Vivado design toolchain to confirm device support for the -1L part before starting implementation.

This page brings together device resource counts, package and I/O details, pin-compatible ordering-code alternatives, and practical design notes that are normally spread across the AMD data sheet, the package drawing, and the Vivado release notes.

Alternativas directas para XCKU040-L1FFVA1156I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con XCKU040-L1FFVA1156I (mismo factor de forma y huella) — difiere en Architecture, Mounting Type, Package, Speed Grade.

AMD
Architecture: Xilinx UltraScale
Mounting Type: Surface Mount
Package: 1156-BBGA, FCBGA
Comparar con XCKU040-L1FFVA1156I →

XCKU040-1FFVA1156I

✅ Sustitución directa
AMD
📦 1156-FCBGA (FFVA1156)
Kintex UltraScale field-programmable gate array (FPGA) · 424,200 cells · 520 I/O · 20 nm · 0.95 V · 1156-ball FCBGA, 35 mm x 35 mm · FCBGA · 1156 balls

Consulte el precio

Ver hoja de datos →

XCKU040-1FFVA1156C

✅ Sustitución directa
AMD
📦 1156-FCBGA (FFVA1156)
Kintex UltraScale FPGA · 530,250 cells · 1,920 slices · 21,606 Kb · 520 I/O · 520 pins · FFVA1156 FCBGA, 1156 pins · 35 mm x 35 mm

Consulte el precio

Ver hoja de datos →

XCKU040-2FFVA1156I

✅ Sustitución directa
AMD
📦 1156-FCBGA (FFVA1156)
Kintex UltraScale · AMD (formerly Xilinx) · 21606000 · 530250 · 520 · -2 · 1156-BBGA, FCBGA · 1156

Consulte el precio

Ver hoja de datos →

XCKU040-3FFVA1156E

✅ Sustitución directa
AMD
📦 1156-FCBGA (FFVA1156)
Kintex UltraScale Field Programmable Gate Array · 20 nm · 530,250 cells · 1,920 CLBs · 741 MHz · 520 I/Os · 1156-BBGA FCBGA · 1,156 pins

Consulte el precio

Ver hoja de datos →

XCKU040-L1FFVA1156I4475

✅ Sustitución directa
📦 1156-FCBGA (FFVA1156)
identical XCKU040-L1FFVA1156I configuration with a customer-specific 4475 programme suffix, same speed grade and package

📋 Alternativa de referencia (no en el catálogo)

XCKU035-1FFVA1156C

✅ Sustitución directa
AMD
📦 1156-FCBGA (FFVA1156)
Kintex UltraScale FPGA · 355,474 cells · 520 I/O · 20 nm · 0.95 V · 1156-BBGA (FCBGA) · FCBGA · 35 mm x 35 mm

Consulte el precio

Ver hoja de datos →

XCKU040-L1FFVA1156I Valores máximos y características eléctricas

Device Family Kintex UltraScale (XCKU040)
Process Technology 20 nm (UltraScale ASIC-class architecture)
Logic Cells 530,250
CLB / LAB Blocks 30,300
Total RAM Bits 21,606,000
User I/O Pins 520
Encapsulado 1156-ball FCBGA (FFVA1156)
Speed Grade -1L (can operate at 0.95 V or 0.90 V VCCINT)
Temperature Suffix I (industrial grade)
Architecture UltraScale (All Programmable ASIC-class architecture)
Tipo de montaje Surface mount, FCBGA substrate
Design Tool Support AMD Vivado (device support must be confirmed for -1L grade)

Guía de configuración de pines de XCKU040-L1FFVA1156I 1156-ball fcbga (ffva1156)

Configuración de pines para XCKU040-L1FFVA1156I (encapsulado 1156-ball fcbga (ffva1156)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 1156-ball fcbga (ffva1156) para XCKU040-L1FFVA1156I

No hay datos detallados de patillaje disponibles para XCKU040-L1FFVA1156I.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

XCKU040-L1FFVA1156I es adecuado para 6 aplicacións: 5G and Wireless Baseband Prototyping, Radar and RF Signal Processing, High-Speed Data Acquisition and Instrumentation, Industrial Video and Machine Vision Processing, Encryption and High-Bandwidth Security Accelerators, Programmable Test and Measurement Front Ends.

🌐

5G and Wireless Baseband Prototyping

The XCKU040-L1FFVA1156I is a natural fit for baseband and radio-prototype platforms because 530,250 logic cells and 21,606,000 bits of block RAM leave ample headroom for datapath, framing and buffer logic. Its 520 user I/O allow parallel interfaces to be brought out alongside a handful of high-speed serial transceivers for real radio data paths. Running the -1L core at 0.90 V VCCINT reduces dynamic power in a chassis that is already thermally loaded by RF front ends, while the industrial I grade tolerates elevated internal temperatures. Use the transceivers for clock recovery and link training, and reserve fabric for the DSP filter chain feeding the modulator.

✈️

Radar and RF Signal Processing

Pulse-Doppler radar front ends need long, predictable data paths and FFT/filter pipelines that run continuously at high clock rates, which is exactly what the XCKU040 UltraScale fabric and DSP48E2 resources provide. The 30,300 CLB/LAB blocks allow a parallelised FFT to be built across many slices rather than a time-multiplexed single engine, and the 21.4 Mb of block RAM stores multi-channel window and range-bin data on die. Choosing the -1L grade trades a small amount of Fmax for lower core power, which matters when the FPGA shares a heatsink with high-power RF amplifiers. The 520 I/O also make it easy to expose multiple ADC channels with parallel data capture.

🔧

High-Speed Data Acquisition and Instrumentation

Data capture cards built around the XCKU040-L1FFVA1156I can sustain multi-gigabit acquisition because the device combines wide fabric bandwidth with 520 user I/O and on-chip RAM for deep capture buffers. The UltraScale memory interconnect is designed to feed large RAM blocks efficiently, so a parallel ADC stream can be stored and post-processed without an external read every sample. The -1L grade also suits laboratory and portable instruments that run from a limited power budget, since dropping core voltage to 0.90 V directly reduces dynamic power. Its industrial temperature rating allows it to sit inside a sealed instrument enclosure with no forced air.

📺

Industrial Video and Machine Vision Processing

Machine-vision gateways that must ingest multiple camera streams and run image enhancement in real time benefit from the XCKU040's combination of 520 I/O, large block RAM for frame buffers and abundant DSP resources for pixel and filter operations. Because video pipelines are throughput-bound rather than purely latency-bound, the wide I/O count allows several parallel sensor inputs plus hardware handshakes to be wired directly. The -1L speed grade is attractive in edge cameras and DIN-rail enclosures where cooling is passive, since lower static and dynamic power directly extends the thermal margin. Local DDR interfaces and on-chip RAM together keep frame data off the external bus during processing.

🖥️

Encryption and High-Bandwidth Security Accelerators

The XCKU040-L1FFVA1156I is well suited to crypto accelerators because the 530,250 logic cells permit wide datapath parallelism for AES, SHA and key-handling engines, and the 21.4 Mb of block RAM supports key storage and pipelined lookup tables. Multiple concurrent lanes can be replicated across the fabric, which raises throughput without increasing clock frequency and therefore without increasing power beyond the -1L grade advantage. The 520 user I/O give room for parallel data paths feeding and returning encrypted blocks over an external interface. For data-centre and network appliance designs, the industrial temperature grade supports operation inside unconditioned equipment rooms.

🧰

Programmable Test and Measurement Front Ends

Instrumentation front ends that combine pattern generation, response capture and real-time decision logic map well onto the XCKU040's fabric. Twenty-one million bits of block RAM allow long capture windows and wide expected-response tables to be held on chip, while 520 I/O support dense pin-level stimulus and boundary-scan style connectivity. Since -1L devices are screened for lower maximum static power, they are a good match for portable and benchtop testers where the power budget covers only the instrument, not the rack. The same 1156-ball FCBGA package used across -1, -2 and -3 grades keeps a single PCB layout reusable for different performance targets.

What is the XCKU040-L1FFVA1156I?
The XCKU040-L1FFVA1156I is an AMD Xilinx Kintex UltraScale FPGA built on the 20 nm UltraScale process, with 530,250 logic cells, 30,300 CLB/LAB blocks, 21,606,000 bits of RAM and 520 user I/O in a 1156-ball FCBGA package. The -1L speed grade can run its core logic at either 0.95 V or 0.90 V VCCINT, and the trailing I designates the industrial temperature grade.
How many logic cells and I/O does the XCKU040 have?
The XCKU040 device provides 530,250 logic cells organised into 30,300 CLB/LAB blocks and exposes 520 user I/O pins. Total on-chip RAM is 21,606,000 bits. According to the AMD Kintex UltraScale data sheet DS892, these resources place the XCKU040 in the middle of the UltraScale lineup, above Zynq UltraScale+ and below Virtex UltraScale+ in logic capacity.
What does the -1L speed grade mean for the XCKU040-L1FFVA1156I?
The -1L grade is a low-power speed option: the device can be operated at either a 0.95 V or a 0.90 V VCCINT supply, and it is screened for lower maximum static power than the standard -1 grade. As the AMD Kintex UltraScale data sheet DS892 notes, the -1L devices can operate at either of two VCCINT voltages, giving designers a direct power-versus-timing trade-off without changing the package or the bitstream target device.
What package does the XCKU040-L1FFVA1156I use?
The device is supplied in a 1156-ball Flip-Chip Ball Grid Array package, ordering code FFVA1156. A 1156-ball FCBGA supports 520 user I/O plus power, ground and dedicated configuration pins, on a large organic substrate that requires a fine-pitch PCB layout and careful thermal-via placement. Confirm the ball-map and land pattern against the package drawing before routing the board.
Where can I download the XCKU040 datasheet PDF?
The device specifications are published in the AMD Kintex UltraScale Data Sheet, document DS892, available through the AMD documentation portal at https://docs.amd.com/v/u/en-US/ds892-kintex-ultrascale-data-sheet. That document contains the DC and AC switching characteristics, speed-grade tables, package information and pin definitions for the XCKU040 in the FFVA1156 package.
Where can I find the XCKU040-L1FFVA1156I pinout and ball map?
The full pinout is published in the AMD Kintex UltraScale Data Sheet DS892 and in the package pinout files distributed with the Vivado tool. For the XCKU040-FFVA1156 device, open the AMD support documentation and search the device name xcku040_ffva1156 to load the pinout document, which lists every ball with its I/O standard, bank and drive-strength options.
Which Vivado version supports the XCKU040?
The XCKU040 is supported by the AMD Vivado design suite, but the -1L speed grade must be present in the installed device support files before you can target it. AMD support guidance advises checking the Vivado release notes and device support list for the installed version; older Lab Edition installs may detect the device as a different family, so upgrading Vivado is typically required.
What is the best drop-in replacement for the XCKU040-L1FFVA1156I?
The closest pin-compatible replacements keep the same 1156-ball FFVA1156 footprint and the same XCKU040 die: XCKU040-1FFVA1156I (standard -1 speed grade, 100% identical resources), XCKU040-1FFVA1156C (commercial temperature grade), XCKU040-2FFVA1156I (faster -2 grade) and XCKU040-3FFVA1156E (fastest -3 grade, extended temperature). Because the ball map is identical, only the bitstream target and timing constraints change.
Can the XCKU040-1FFVA1156I replace the XCKU040-L1FFVA1156I?
Yes, the XCKU040-1FFVA1156I is a direct drop-in replacement because it uses the identical 1156-ball FCBGA package and the identical XCKU040 silicon, so the pinout, power rails and bitstream structure are unchanged. The only functional difference is the speed grade: the -1 grade is faster-rated than the -1L grade, so timing constraints can be tightened after conversion.
XCKU040-L1FFVA1156I vs XCKU040-2FFVA1156I - which should I choose?
Choose the XCKU040-L1FFVA1156I when static and dynamic power matter more than maximum clock frequency, because the -1L grade can run at a reduced 0.90 V VCCINT and is screened for lower maximum static power. Choose the XCKU040-2FFVA1156I when your design is timing-critical and you need the higher -2 speed grade for Fmax headroom; both share the same 1156-ball FFVA1156 footprint.
When should I choose the XCKU040-L1FFVA1156I over the XCKU040-2FFVA1156I?
Select the -1L variant for low-power or thermally constrained designs, moderate clock targets and cost-sensitive builds where lower static power and a 0.90 V core option reduce supply and cooling requirements. Select the -2 variant when timing closure on 100 MHz-plus interfaces, DSP pipelines or high-speed memory interfaces is the binding constraint, or when a higher margin against future process spread is required.
Is the XCKU040-L1FFVA1156I suitable for industrial temperature applications?
Yes. The trailing I in the ordering code denotes the industrial temperature grade, so the device is specified for extended commercial-temperature operation rather than the consumer range covered by the C suffix. For a design that must run hot, verify the exact junction and ambient limits and the package thermal data in the AMD Kintex UltraScale Data Sheet DS892, and confirm supply availability for the I grade before committing.
Is the XCKU040-L1FFVA1156I RoHS compliant?
The RoHS status for this ordering code is not stated in the published listing data available for the XCKU040-L1FFVA1156I, so treat the compliance declaration as unconfirmed until the AMD product page or the declaration-of-compliance document for the FFVA1156 package is checked. The AMD material declaration and the package compliance documents are the authoritative sources for lead-free, halogen-free and RoHS status of this device.
What are the key specifications of the XCKU040-L1FFVA1156I that engineers should know?
The critical figures are 530,250 logic cells, 30,300 CLB/LAB blocks, 21,606,000 bits of block RAM, 520 user I/O, a 1156-ball FCBGA package and a 20 nm UltraScale process node. The -1L speed grade operates the core at 0.95 V or 0.90 V VCCINT with screening for lower maximum static power, and the I suffix marks the industrial temperature grade for the whole device.
What can replace the XCKU040-L1FFVA1156I?
A drop-in replacement must keep the same 1156-ball FFVA1156 land pattern and the same XCKU040 silicon: XCKU040-1FFVA1156I, XCKU040-1FFVA1156C, XCKU040-2FFVA1156I, XCKU040-3FFVA1156E and XCKU040-L1FFVA1156I4475 are all orderable variants of the same device in the same package. A smaller die such as XCKU035-1FFVA1156C uses the same 1156-ball package but has fewer logic cells, so it is only suitable where the design fits well under the smaller resource count.
Where to buy the XCKU040-L1FFVA1156I and what is the lead time?
Use the Request a Quote form on this page to check current availability, allocation and lead time for the XCKU040-L1FFVA1156I, and to receive a firm quotation. Because UltraScale FPGAs are allocated high-performance silicon with long planning cycles, confirm the build schedule early and share your target volume, date code and required package marking so the correct 1156-ball FCBGA variant can be allocated.
How does the XCKU040 compare with the XCKU035 in the same package?
Both devices use the 1156-ball FFVA1156 package, but they are different dies with different capacities, so they are not interchangeable at the logic level. The XCKU040 provides 530,250 logic cells and 21,606,000 RAM bits, while the XCKU035 is the smaller member of the Kintex UltraScale family with fewer logic cells, block RAM and DSP resources. Use the XCKU035 only if your design fits inside its smaller resource envelope.

Datos de referencia de ingeniería para XCKU040-L1FFVA1156I — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the XCKU040-L1FFVA1156I when your design needs the full Kintex UltraScale resource set (530,250 logic cells, 21,606,000 RAM bits, 520 user I/O) but its timing target is moderate and power or thermal budget matters, since the -1L grade can run at 0.90 V VCCINT and is screened for lower static power. Choose the XCKU040-1FFVA1156I when you need the same resources with a higher -1 timing rating at the same industrial temperature grade. Choose the XCKU040-2FFVA1156I or XCKU040-3FFVA1156E when Fmax headroom on memory interfaces, DSP pipelines or transceiver datapaths is the binding constraint, accepting the higher power draw. Choose the XCKU040-1FFVA1156C only for room-temperature commercial equipment. Use the XCKU035-1FFVA1156C only when the design comfortably fits the smaller die. All of these share the same 1156-ball FCBGA land pattern, so a single PCB layout can be reused across the family.

Comparación con alternativas

Parámetro Este producto XCKU040-1FFVA1156I XCKU040-1FFVA1156C XCKU040-2FFVA1156I XCKU040-3FFVA1156E XCKU040-L1FFVA1156I4475 XCKU035-1FFVA1156C
Package 1156-FCBGA (FFVA1156) 1156-FCBGA (FFVA1156) - identical 1156-FCBGA (FFVA1156) - identical 1156-FCBGA (FFVA1156) - identical 1156-FCBGA (FFVA1156) - identical 1156-FCBGA (FFVA1156) - identical 1156-FCBGA (FFVA1156) - identical ball map
Brand AMD (Xilinx) AMD (Xilinx) AMD (Xilinx) AMD (Xilinx) AMD (Xilinx) AMD (Xilinx) AMD (Xilinx)
Device / Family Kintex UltraScale XCKU040 Kintex UltraScale XCKU040 Kintex UltraScale XCKU040 Kintex UltraScale XCKU040 Kintex UltraScale XCKU040 Kintex UltraScale XCKU040 Kintex UltraScale XCKU035 (smaller die)
Speed Grade -1L (0.95 V or 0.90 V VCCINT, lower static power screening) -1 -1 -2 -3 -1L -1
Temperature Grade I (industrial) I (industrial) C (commercial) I (industrial) E (extended) I (industrial) C (commercial)
Process Technology 20 nm 20 nm 20 nm 20 nm 20 nm 20 nm 20 nm

Diferenciadores clave

  • -1L grade with dual VCCINT options reduces core power versus the standard -1 grade (frente a XCKU040-1FFVA1156I)
  • Full XCKU040 resource set with 520 user I/O (frente a XCKU035-1FFVA1156C)
  • Industrial temperature rating for thermally and environmentally demanding builds (frente a XCKU040-1FFVA1156C)
  • Single 1156-ball FFVA1156 land pattern across the whole speed-grade family (frente a XCKU040-2FBVA900I)

Notas de diseño

Plan the supply tree around the four independent UltraScale rails (VCCINT, VCCBRAM, VCCAUX and VCCO) rather than tying them together. The -1L grade of the XCKU040-L1FFVA1156I can be operated at either 0.95 V or 0.90 V VCCINT; if the design closes timing at 0.90 V, use it, because core dynamic power scales strongly with VCCINT. Place the bulk and high-frequency decoupling capacitors at the same pins as the package power balls, following the recommended capacitor values in the AMD Kintex UltraScale Data Sheet DS892, and verify the ripple on each rail with an oscilloscope at the device pins rather than at the regulator.

The 1156-ball FCBGA exposes a large thermal escape path through the substrate and the package balls that must be tied to a ground plane. Estimated: with a 29 mm x 29 mm FCBGA and an effective heat-spreader area of roughly 8 cm2, the board-level thermal resistance from junction to ambient is typically around 1 C/W to 2 C/W with a full via field and copper pours, which is far better than a same-size leaded package. Without vias under the array, the rise can be several times higher. Use a via-in-pad or via-fanout pattern, add a heat spreader if the enclosure is sealed, and check the ambient operating condition against the industrial temperature rating before finalising the mechanical design.

Lay out the 1156-ball FCBGA as a fine-pitch BGA with a differential-pair-aware escape strategy, keeping the ball-map orientation identical to the AMD package drawing so the same board can accept the -1, -2 and -3 grades. Route the dedicated configuration pins (including the startup mode pins) as a group with no stubs, keep the high-speed serial transceiver reference clock and its decoupling in a tight, isolated island, and provide a clean reset and JTAG path for boundary scan. Do not place test points on high-speed nets unless they are designed for 50 ohm impedance.

Two mistakes recur on this device. First, targeting the -1L grade in a Vivado installation whose device-support files predate the L-grade: the tool reports the device as unsupported or as a different family, so confirm support in the installed release notes before writing RTL. Second, assuming the -1L and -1 parts are timing-equivalent: the L-grade is rated lower, so re-run timing analysis after any speed-grade conversion and update the timing constraints. Also verify that the bitstream target part name matches the fitted ordering code, otherwise the configuration CRC check fails at power-up.

For the UltraScale SelectIO signals, use the on-die termination (ODT) and DIFF_TERM primitives instead of external resistor networks where the datasheet recommends them, and set the drive strength and slew to match the target standard rather than leaving defaults. Keep the package balls of each bank on a single contiguous supply plane to limit simultaneous-switching noise, and bring a quiet analog ground reference into the VCCAUX ball group. For the transceivers, follow the reference clock routing rules in the AMD transceiver user guide so that the clock pair is length-matched and isolated from fabric switching activity.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No compliance declaration is published on the listing pages for this ordering code; the AMD material declaration and package compliance documents for the FFVA1156 package are the authoritative source for RoHS, REACH, lead-free and halogen-free status. AEC-Q100 does not apply to this device.

Datos verificados el: 2026-11-18 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

xcku040 datasheet xcku040 1ffva1156 xcku040 ffva1156 xcku040 2ffva1156e datasheet xcku040 3ffva1156e xcku040 2ffva1156i xcku040 1ffva1156c xcku040 1fbva676c XCKU040-L1FFVA1156I pinout XCKU040-L1FFVA1156I equivalent XCKU040-L1FFVA1156I drop-in replacement XCKU040-L1FFVA1156I vs XCKU035-1FFVA1156C AMD Kintex UltraScale FPGA 520 IO 1156 FCBGA XCKU040-L1FFVA1156I price and stock AMD XCKU040 FPGA application circuit

Componentes & términos relacionados

AMD Xilinx XCKU040-L1FFVA1156I XCKU040 XCKU035 Kintex UltraScale UltraScale architecture FPGA field programmable gate array logic cell CLB LAB block RAM 21,606,000 RAM bits 520 user I/O 1156-FCBGA FFVA1156 BGA package family surface mount 20 nm process ASIC-class architecture VCCINT 0.90 V 0.95 V -1L speed grade industrial temperature grade DSP48E2 SelectIO transceiver AMD Vivado DS892 RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ