XCKU040-L1FFVA1156I - Kintex UltraScale FPGA, 520 I/O | AMD
MPN: XCKU040-L1FFVA1156I ✓ فعالXCKU040-L1FFVA1156I جائزہ
An FPGA is a programmable semiconductor whose logic, memory and I/O resources are configured by a bitstream loaded at power-up. The Kintex UltraScale family sits between the lower-cost Zynq UltraScale devices and the higher-end Virtex UltraScale devices, and it is built on the UltraScale architecture that uses ASIC-class ASIC-style logic cells (ASIC = application-specific integrated circuit). The 20 nm node delivers high logic density, next-generation memory resources and low-cost packaging compared with earlier-generation 7 series devices.
Key device resources include 21.4 Mb of block RAM, 520 selectable I/O pins, DSP48E2 blocks for fixed-point and floating-point signal processing, transceivers for high-speed serial links, and dedicated clock management with PLL and MMCM primitives. The UltraScale architecture adds features such as the UltraScale SelectIO resources, memory interconnect improvements, and the ability to split large designs into multiple floorplanned partitions for improved timing closure and parallel implementation.
The -1L grade targets mid-speed designs where energy efficiency matters more than maximum clock frequency. Because the L-grade can run its core logic at 0.90 V as well as 0.95 V, designers can trade core voltage for dynamic power reduction on designs that do not need the highest Fmax. A full 1156-ball FCBGA package on a 29 mm x 29 mm substrate supports very high pin counts and dense board-level escape routing, and the exposed thermal structure demands careful PCB thermal design.
Typical uses include 5G and wireless baseband prototyping, radar and RF signal processing, high-speed data acquisition, industrial video and machine-vision pipelines, high-bandwidth cryptography accelerators, and test-and-measurement front ends. The large I/O count and abundant block RAM make it a common fit for prototype boards that expose multiple high-speed lanes and DDR memory interfaces.
When designing around this device, plan the power tree for the separate VCCINT, VCCBRAM, VCCAUX and VCCO rails, verify that your board provides the correct decoupling network, and confirm the speed grade and temperature suffix against the exact ordering code before committing to a build. Use the Vivado design toolchain to confirm device support for the -1L part before starting implementation.
This page brings together device resource counts, package and I/O details, pin-compatible ordering-code alternatives, and practical design notes that are normally spread across the AMD data sheet, the package drawing, and the Vivado release notes.
کے لیے ڈراپ اِن متبادل XCKU040-L1FFVA1156I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XCKU040-L1FFVA1156I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Mounting Type, Package, Speed Grade.
XCKU040-1FFVA1156I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XCKU040-1FFVA1156C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XCKU040-2FFVA1156I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XCKU040-3FFVA1156E
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XCKU040-L1FFVA1156I4475
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XCKU035-1FFVA1156C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XCKU040-L1FFVA1156I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Family | Kintex UltraScale (XCKU040) |
| Process Technology | 20 nm (UltraScale ASIC-class architecture) |
| Logic Cells | 530,250 |
| CLB / LAB Blocks | 30,300 |
| Total RAM Bits | 21,606,000 |
| User I/O Pins | 520 |
| پیکیج | 1156-ball FCBGA (FFVA1156) |
| Speed Grade | -1L (can operate at 0.95 V or 0.90 V VCCINT) |
| Temperature Suffix | I (industrial grade) |
| Architecture | UltraScale (All Programmable ASIC-class architecture) |
| ماؤنٹنگ ٹائپ | Surface mount, FCBGA substrate |
| Design Tool Support | AMD Vivado (device support must be confirmed for -1L grade) |
XCKU040-L1FFVA1156I 1156-ball fcbga (ffva1156) پن کنفیگریشن گائیڈ
XCKU040-L1FFVA1156I (1156-ball fcbga (ffva1156) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XCKU040-L1FFVA1156I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XCKU040-L1FFVA1156I کے لیے موزوں ہے 6 ایپلیکیشنs: 5G and Wireless Baseband Prototyping, Radar and RF Signal Processing, High-Speed Data Acquisition and Instrumentation, Industrial Video and Machine Vision Processing, Encryption and High-Bandwidth Security Accelerators, Programmable Test and Measurement Front Ends.
5G and Wireless Baseband Prototyping
The XCKU040-L1FFVA1156I is a natural fit for baseband and radio-prototype platforms because 530,250 logic cells and 21,606,000 bits of block RAM leave ample headroom for datapath, framing and buffer logic. Its 520 user I/O allow parallel interfaces to be brought out alongside a handful of high-speed serial transceivers for real radio data paths. Running the -1L core at 0.90 V VCCINT reduces dynamic power in a chassis that is already thermally loaded by RF front ends, while the industrial I grade tolerates elevated internal temperatures. Use the transceivers for clock recovery and link training, and reserve fabric for the DSP filter chain feeding the modulator.
تجویز کردہ
Radar and RF Signal Processing
Pulse-Doppler radar front ends need long, predictable data paths and FFT/filter pipelines that run continuously at high clock rates, which is exactly what the XCKU040 UltraScale fabric and DSP48E2 resources provide. The 30,300 CLB/LAB blocks allow a parallelised FFT to be built across many slices rather than a time-multiplexed single engine, and the 21.4 Mb of block RAM stores multi-channel window and range-bin data on die. Choosing the -1L grade trades a small amount of Fmax for lower core power, which matters when the FPGA shares a heatsink with high-power RF amplifiers. The 520 I/O also make it easy to expose multiple ADC channels with parallel data capture.
تجویز کردہ
High-Speed Data Acquisition and Instrumentation
Data capture cards built around the XCKU040-L1FFVA1156I can sustain multi-gigabit acquisition because the device combines wide fabric bandwidth with 520 user I/O and on-chip RAM for deep capture buffers. The UltraScale memory interconnect is designed to feed large RAM blocks efficiently, so a parallel ADC stream can be stored and post-processed without an external read every sample. The -1L grade also suits laboratory and portable instruments that run from a limited power budget, since dropping core voltage to 0.90 V directly reduces dynamic power. Its industrial temperature rating allows it to sit inside a sealed instrument enclosure with no forced air.
تجویز کردہ
Industrial Video and Machine Vision Processing
Machine-vision gateways that must ingest multiple camera streams and run image enhancement in real time benefit from the XCKU040's combination of 520 I/O, large block RAM for frame buffers and abundant DSP resources for pixel and filter operations. Because video pipelines are throughput-bound rather than purely latency-bound, the wide I/O count allows several parallel sensor inputs plus hardware handshakes to be wired directly. The -1L speed grade is attractive in edge cameras and DIN-rail enclosures where cooling is passive, since lower static and dynamic power directly extends the thermal margin. Local DDR interfaces and on-chip RAM together keep frame data off the external bus during processing.
تجویز کردہ
Encryption and High-Bandwidth Security Accelerators
The XCKU040-L1FFVA1156I is well suited to crypto accelerators because the 530,250 logic cells permit wide datapath parallelism for AES, SHA and key-handling engines, and the 21.4 Mb of block RAM supports key storage and pipelined lookup tables. Multiple concurrent lanes can be replicated across the fabric, which raises throughput without increasing clock frequency and therefore without increasing power beyond the -1L grade advantage. The 520 user I/O give room for parallel data paths feeding and returning encrypted blocks over an external interface. For data-centre and network appliance designs, the industrial temperature grade supports operation inside unconditioned equipment rooms.
تجویز کردہ
Programmable Test and Measurement Front Ends
Instrumentation front ends that combine pattern generation, response capture and real-time decision logic map well onto the XCKU040's fabric. Twenty-one million bits of block RAM allow long capture windows and wide expected-response tables to be held on chip, while 520 I/O support dense pin-level stimulus and boundary-scan style connectivity. Since -1L devices are screened for lower maximum static power, they are a good match for portable and benchtop testers where the power budget covers only the instrument, not the rack. The same 1156-ball FCBGA package used across -1, -2 and -3 grades keeps a single PCB layout reusable for different performance targets.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XCKU040-L1FFVA1156I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XCKU040-1FFVA1156I | XCKU040-1FFVA1156C | XCKU040-2FFVA1156I | XCKU040-3FFVA1156E | XCKU040-L1FFVA1156I4475 | XCKU035-1FFVA1156C |
|---|---|---|---|---|---|---|---|
| Package | 1156-FCBGA (FFVA1156) | 1156-FCBGA (FFVA1156) - identical | 1156-FCBGA (FFVA1156) - identical | 1156-FCBGA (FFVA1156) - identical | 1156-FCBGA (FFVA1156) - identical | 1156-FCBGA (FFVA1156) - identical | 1156-FCBGA (FFVA1156) - identical ball map |
| Brand | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) |
| Device / Family | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU040 | Kintex UltraScale XCKU035 (smaller die) |
| Speed Grade | -1L (0.95 V or 0.90 V VCCINT, lower static power screening) | -1 | -1 | -2 | -3 | -1L | -1 |
| Temperature Grade | I (industrial) | I (industrial) | C (commercial) | I (industrial) | E (extended) | I (industrial) | C (commercial) |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
اہم امتیازی خصوصیات
- -1L grade with dual VCCINT options reduces core power versus the standard -1 grade (بمقابلہXCKU040-1FFVA1156I)
- Full XCKU040 resource set with 520 user I/O (بمقابلہXCKU035-1FFVA1156C)
- Industrial temperature rating for thermally and environmentally demanding builds (بمقابلہXCKU040-1FFVA1156C)
- Single 1156-ball FFVA1156 land pattern across the whole speed-grade family (بمقابلہXCKU040-2FBVA900I)
ڈیزائن نوٹس
Plan the supply tree around the four independent UltraScale rails (VCCINT, VCCBRAM, VCCAUX and VCCO) rather than tying them together. The -1L grade of the XCKU040-L1FFVA1156I can be operated at either 0.95 V or 0.90 V VCCINT; if the design closes timing at 0.90 V, use it, because core dynamic power scales strongly with VCCINT. Place the bulk and high-frequency decoupling capacitors at the same pins as the package power balls, following the recommended capacitor values in the AMD Kintex UltraScale Data Sheet DS892, and verify the ripple on each rail with an oscilloscope at the device pins rather than at the regulator.
The 1156-ball FCBGA exposes a large thermal escape path through the substrate and the package balls that must be tied to a ground plane. Estimated: with a 29 mm x 29 mm FCBGA and an effective heat-spreader area of roughly 8 cm2, the board-level thermal resistance from junction to ambient is typically around 1 C/W to 2 C/W with a full via field and copper pours, which is far better than a same-size leaded package. Without vias under the array, the rise can be several times higher. Use a via-in-pad or via-fanout pattern, add a heat spreader if the enclosure is sealed, and check the ambient operating condition against the industrial temperature rating before finalising the mechanical design.
Lay out the 1156-ball FCBGA as a fine-pitch BGA with a differential-pair-aware escape strategy, keeping the ball-map orientation identical to the AMD package drawing so the same board can accept the -1, -2 and -3 grades. Route the dedicated configuration pins (including the startup mode pins) as a group with no stubs, keep the high-speed serial transceiver reference clock and its decoupling in a tight, isolated island, and provide a clean reset and JTAG path for boundary scan. Do not place test points on high-speed nets unless they are designed for 50 ohm impedance.
Two mistakes recur on this device. First, targeting the -1L grade in a Vivado installation whose device-support files predate the L-grade: the tool reports the device as unsupported or as a different family, so confirm support in the installed release notes before writing RTL. Second, assuming the -1L and -1 parts are timing-equivalent: the L-grade is rated lower, so re-run timing analysis after any speed-grade conversion and update the timing constraints. Also verify that the bitstream target part name matches the fitted ordering code, otherwise the configuration CRC check fails at power-up.
For the UltraScale SelectIO signals, use the on-die termination (ODT) and DIFF_TERM primitives instead of external resistor networks where the datasheet recommends them, and set the drive strength and slew to match the target standard rather than leaving defaults. Keep the package balls of each bank on a single contiguous supply plane to limit simultaneous-switching noise, and bring a quiet analog ground reference into the VCCAUX ball group. For the transceivers, follow the reference clock routing rules in the AMD transceiver user guide so that the clock pair is length-matched and isolated from fabric switching activity.
تعمیل کی معلومات
No compliance declaration is published on the listing pages for this ordering code; the AMD material declaration and package compliance documents for the FFVA1156 package are the authoritative source for RoHS, REACH, lead-free and halogen-free status. AEC-Q100 does not apply to this device.