XMC4402F100F256ABXQMA1 - 120MHz 256KB MCU | Infineon
N.º de pieza: XMC4402F100F256ABXQMA1 ✓ ActivoXMC4402F100F256ABXQMA1 Descripción general
An Arm Cortex-M4 microcontroller is a 32-bit embedded processor used to execute control software, monitor sensors, operate communication peripherals, and manage real-time system tasks. The Cortex-M4 architecture belongs to the embedded microcontroller hierarchy rather than application processors or DSPs. It combines instruction-efficient processing, interrupt-driven peripherals, and deterministic peripherals in a device designed for industrial embedded control and connected automation.
The XMC4402F100F256ABXQMA1's principal characteristics are its 120 MHz operating frequency, 256 KB flash memory, and integrated Ethernet MAC. Flash retains firmware without a separate external memory device, while the Ethernet MAC supports network-connected designs. The 100-pin LQFP package exposes the microcontroller's digital interfaces and analog and connectivity functions through a relatively high pin count, making it practical for medium-complexity industrial control boards.
The XMC4000 architecture is organized around an Arm Cortex-M4 core and dedicated peripherals for embedded control and communications. Its Ethernet capability makes it especially relevant to industrial Ethernet equipment, factory automation controllers, networked sensor hubs, and embedded gateways. Firmware can divide the device between control-loop execution and network protocol handling, reducing the need for separate interface devices when the application does not require higher protocol-processing performance.
Typical uses include industrial Ethernet controllers, programmable automation modules, building automation equipment, networked sensor interfaces, and compact machine-control systems. The combination of 120 MHz processing, 256 KB flash, and Ethernet MAC makes the part suitable for products that must respond to local inputs while also exchanging status, configuration, or diagnostic data over a network.
PCB design should preserve the package's thermal and electrical requirements, including careful decoupling, a stable 3.3 V supply, and compliant handling of high-speed Ethernet signals. Confirm the exact pin assignments, peripheral multiplexing, and clock configuration in the Infineon product documentation before finalizing board connections. Software development should likewise validate the selected peripheral instance, interrupt routing, and Ethernet PHY interface against the system requirements.
This product summary combines the confirmed XMC4402F100F256ABXQMA1 characteristics with practical selection, comparison, and design guidance. It highlights the processor core, memory configuration, package, Ethernet capability, likely industrial applications, and the limitations that must be checked before treating another microcontroller as a drop-in replacement.
Alternativas directas para XMC4402F100F256ABXQMA1 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XMC4402F100F256ABXQMA1 (mismo factor de forma y huella) — difiere en Flash Organization, Package, Product Type, Ethernet Support, Flash Memory.
XMC4402-F100F256-BA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XMC4402-F100K256-BA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XMC4400F100F256BAXQMA1
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XMC4400F100F512BAXQMA1
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XMC4400F100K512BAXQMA1
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XMC4402F100F256ABXQMA1 Valores máximos y características eléctricas
| Product Type | 32-bit industrial Arm Cortex-M4 microcontroller |
| Series | XMC4000 |
| Processor Core | Arm Cortex-M4 |
| CPU Word Size | 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 80 KB |
| Tensión de alimentación | 3.3 V |
| Ethernet Support | Ethernet MAC integrated |
| Encapsulado | PG-LQFP-100-11 |
| Recuento de pines | 100 pins |
| Tipo de montaje | Surface mount |
| Product Qualification | Industrial |
Guía de configuración de pines de XMC4402F100F256ABXQMA1 pg-lqfp-100-11
Configuración de pines para XMC4402F100F256ABXQMA1 (encapsulado pg-lqfp-100-11). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XMC4402F100F256ABXQMA1.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XMC4402F100F256ABXQMA1 es adecuado para 6 aplicacións: Industrial Ethernet Controller, Factory Automation Controller, Networked Sensor Hub, Building Automation Controller, Embedded Network Gateway, Compact Machine Control Module.
Industrial Ethernet Controller
The XMC4402F100F256ABXQMA1 fits industrial Ethernet controllers because it combines a 120 MHz Arm Cortex-M4 core with an integrated Ethernet MAC and 256 KB of flash. The controller can execute control logic, diagnostics, configuration management, and network tasks in one device. Its 80 KB of SRAM provides working space for protocol buffers and real-time state, while the 3.3 V PG-LQFP-100-11 package supports conventional industrial board layouts. A production design must implement the required PHY and magnetics interface and verify signal-integrity, isolation, and EMC requirements.
Recomendado
Factory Automation Controller
For factory automation, the XMC4402F100F256ABXQMA1 can combine machine control and communication in one industrial microcontroller. Its 120 MHz Cortex-M4 core supports responsive digital control, while 256 KB of flash stores application code and 80 KB of SRAM handles state, timers, and communication buffers. Integrated Ethernet MAC functionality enables status reporting and remote diagnostics. The 100-pin LQFP package exposes the required peripheral and I/O resources, but pin multiplexing must be selected carefully for isolated digital inputs, outputs, and sensor interfaces.
Recomendado
Networked Sensor Hub
The XMC4402F100F256ABXQMA1 is suitable for a networked sensor hub that gathers local measurements, applies filtering or control logic, and forwards results over Ethernet. Its 120 MHz processing rate leaves useful performance margin for protocol handling alongside sensor servicing, while the integrated Ethernet MAC avoids dedicating a separate interface IC when an external PHY is acceptable. The 256 KB flash and 80 KB SRAM are practical for moderate sensing workloads. Designers should budget peripheral I/O, ADC resources, calibration storage, and deterministic update latency against the exact device configuration.
Recomendado
Building Automation Controller
In building automation equipment, the XMC4402F100F256ABXQMA1 can supervise sensors and actuators while maintaining Ethernet-based communication with building systems. Its industrial Cortex-M4 architecture provides deterministic control execution, and the 3.3 V operating point integrates with conventional embedded control boards. The 256 KB flash is appropriate for networking, schedules, logging, and control firmware, while 80 KB of SRAM supports active protocol and control state. Deployment-specific requirements, including operating temperature, isolation, surge exposure, and electromagnetic compatibility, must be verified for the target installation.
Recomendado
Embedded Network Gateway
The XMC4402F100F256ABXQMA1 can serve as the control processor in a compact embedded gateway that bridges local industrial signals and Ethernet services. The 120 MHz Arm Cortex-M4 core can execute protocol stacks, data conditioning, and supervisory logic, while the integrated Ethernet MAC supports network connectivity. Its 256 KB flash provides nonvolatile program storage and 80 KB of SRAM supports working buffers. The 100-pin package allows integration with power regulation, status indication, configuration interfaces, and external transceivers, although the chosen PHY and magnetics must be validated with the complete Ethernet design.
Recomendado
Compact Machine Control Module
The XMC4402F100F256ABXQMA1 is appropriate for compact machine-control modules that need deterministic processing, local I/O, and communication in one component. Its 120 MHz Cortex-M4 performance supports control loops and service logic, and the 256 KB flash accommodates embedded firmware without external program memory. Ethernet MAC functionality can provide diagnostics or machine-to-cell communication, while 80 KB of SRAM serves control variables and data buffers. The PG-LQFP-100-11 footprint is suitable for leaded PCB assembly, but thermal performance and power sequencing must be evaluated against ambient temperature and output activity.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XMC4402F100F256ABXQMA1 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XMC4402-F100F256-BA | XMC4402-F100K256-BA | XMC4400F100F256BAXQMA1 | XMC4400F100F512BAXQMA1 | XMC4400F100K512BAXQMA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins |
Diferenciadores clave
- Exact XMC4402 family positioning (frente a XMC4400F100F256BAXQMA1)
- Memory profile tailored to 256 KB flash designs (frente a XMC4402-F100K256-BA)
- Lower flash requirement without reducing CPU speed (frente a XMC4400F100F512BAXQMA1)
- Documented industrial Ethernet MCU configuration (frente a XMC4402-F100K256-BA)
Notas de diseño
Design the 3.3 V supply for both steady-state controller demand and transient events associated with Ethernet and digital activity. Place the device's decoupling capacitors at the associated power and ground pins using short traces, and keep the supply return path continuous beneath the package. Verify the exact pin names, voltage limits, and external-component recommendations in the Infineon pin and hardware guidance before fixing capacitor values or defining the power-up sequence.
Route Ethernet signals as a controlled-impedance, continuous-reference-plane interface and keep the PHY, magnetics, and connector placement consistent with the selected reference design. Isolate clocks, analog signals, and sensitive sensor inputs from switching nodes and high-current return paths. Because many XMC4000 functions are multiplexed, assign pins only after checking the complete package diagram and alternate-function table; a nominal pin count does not guarantee that every desired interface is simultaneously available.
Do not assume that an XMC4400 or XMC4402 ordering code is interchangeable solely because it uses a 100-pin LQFP and runs at 120 MHz. Compare flash and SRAM organization, temperature range, qualification, Ethernet features, peripheral instances, package dimensions, and the complete ordering suffix. Preserve boot and debug access during design validation, and confirm that existing firmware does not rely on a peripheral or pin function that changes between otherwise similar family members.
Información de cumplimiento
The Infineon product page identifies the base XMC4402-F100F256-BA device as industrial. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the complete XMC4402F100F256ABXQMA1 ordering code was not established.