Zilog

Z86C9012PEC - 8-Bit 12MHz ROMless MCU | ZiLOG

N.º de pieza: Z86C9012PEC ✗ Fin de vida
PEC, 40-pin plastic DIP Package 12 MHz Speed External, ROMless configuration Memory
MOQ: 1 |

Z86C9012PEC Descripción general

The ZiLOG Z86C9012PEC is an 8-bit Z8 ROMless microcontroller operating at 12 MHz and supplied in a 40-pin through-hole DIP package. The C40 marking identifies the device variant, while the PEC suffix denotes the industrial-temperature, plastic-DIP configuration used in legacy control and instrumentation equipment.

A ROMless microcontroller is an application-specific controller that executes firmware from external program memory. In the Z86C9012PEC, the absence of embedded program ROM allows the system designer to select the memory size and organization that match the application. External address and data buses connect the controller to program memory, data memory, and peripheral devices. This architecture differs from a mask-programmable or ROM-based MCU because the firmware remains field-updateable when the external memory supports programming.

The principal operating characteristics include an 8-bit CPU architecture, a 12 MHz clock rating, ROMless operation, and a 40-terminal industrial through-hole package. The through-hole DIP footprint supports conventional through-hole assembly and socketed legacy designs, while the four-side rectangular package leaves ample board pitch for hand soldering and inspection. Clock timing, peripheral resources, port counts, memory interfaces, voltage limits, and reset behavior should be confirmed from the Zilog datasheet before schematic or firmware sign-off.

The Z86C9012PEC is suited to industrial controllers, instrumentation panels, motor sequencing modules, legacy peripheral controllers, and embedded products that retain a DIP footprint from an earlier design. An external program-memory device is required because this controller provides no internal ROM. Designers should also allow for address decoding, bus timing, decoupling, and supply-voltage sequencing when replacing a previously programmed MCU.

A DIP package offers mechanical compatibility with established PCB layouts, but it occupies more board area than a modern surface-mount controller. New compact designs may prefer a smaller microcontroller; however, changing architecture also requires port remapping, firmware revision, and external-bus revalidation. For repair and lifecycle-extension applications, preserving the exact footprint can eliminate unnecessary board redesign.

This page combines the confirmed device identity, package information, operating frequency, and lifecycle-relevant sourcing guidance with practical migration and assembly notes. Use the manufacturer pin-description table and electrical characteristics for final design decisions, especially when external memory timing or absolute maximum ratings determine board reliability.

Alternativas directas para Z86C9012PEC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con Z86C9012PEC (mismo factor de forma y huella) — difiere en Mounting Type, Program Memory.

Zilog
Mounting Type: Through-hole
Program Memory: External
Comparar con Z86C9012PEC →

SC80C31BCCN40

✅ Sustitución directa
📦 40-pin DIP
Different 8-bit MCU architecture and toolchain; 12 MHz-class operation, but port mapping, memory interface, and firmware require verification rather than an automatic substitution

📋 Alternativa de referencia (no en el catálogo)

Z86C9012PEC Valores máximos y características eléctricas

Microcontroller Type 8-bit ROMless Microcontroller
CPU Architecture 8-bit Z8
Frecuencia de reloj máxima 12 MHz
Program Memory External, ROMless configuration
Device Marking C40
Package Code PEC, 40-pin plastic DIP
Number of Terminals 40 pins
Terminal Form Through-hole
Package Shape Rectangular
Tipo de montaje Through-hole PCB mount
Temperature Grade Industrial
Manufacturer ZiLOG
Product Family Z8 Microcontroller
Core Architecture 8-bit
Maximum CPU Frequency 12 MHz

Guía de configuración de pines de Z86C9012PEC rectangular

Configuración de pines para Z86C9012PEC (encapsulado rectangular). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado rectangular para Z86C9012PEC

No hay datos detallados de patillaje disponibles para Z86C9012PEC.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

Z86C9012PEC es adecuado para 6 aplicacións: Legacy Industrial Control Boards, Programmable Instrumentation Modules, Peripheral and Motor Sequencing Control, Embedded Data Acquisition and Control, Legacy Communication Gateway Boards, Equipment Repair and Obsolescence Mitigation.

🔧

Legacy Industrial Control Boards

The Z86C9012PEC fits repair and lifecycle-extension work on industrial control boards that already use a 40-pin DIP footprint. Its 12 MHz maximum clock and 8-bit Z8 architecture support the control-loop and supervisory functions typical of older machine controllers, while industrial-temperature identification suits controlled indoor equipment. The through-hole package also makes inspection and replacement easier than a dense surface-mount design. Because the MCU is ROMless, the original board must retain or correctly reproduce its external program-memory connection. Verify pin functions, supply voltage, reset behavior, and memory timing against the Zilog documentation before releasing a replacement.

🔧

Programmable Instrumentation Modules

The Z86C9012PEC can serve as the control processor in programmable instrumentation that relies on external code memory and simple digital I/O. At 12 MHz, the controller provides sufficient clock capability for menu handling, sensor conditioning interfaces, status reporting, and low-speed communications in classic instrument designs. The 40-pin DIP package provides generous interconnection capacity and is well suited to socketed or conventional through-hole assembly. The ROMless architecture allows firmware revisions to be handled in external memory rather than requiring a masked-program replacement. Validate the external bus timing, address decoding, and port multiplexing before adapting the controller to a new measurement front end.

🔧

Peripheral and Motor Sequencing Control

The Z86C9012PEC is appropriate for legacy sequencing modules that coordinate relays, solenoids, stepper mechanisms, or indicator systems from an 8-bit controller. Its 12 MHz clock rating supports deterministic interrupt servicing and multi-state control logic, while the DIP footprint simplifies maintenance in electromechanical panels. External program memory allows the operating sequence to be revised for different machine configurations. Designers should budget the timing margin needed for relay drivers and inductive loads, keep switching transients away from sensitive logic, and follow the manufacturer's grounding and decoupling guidance. Confirm the available port count and specific peripheral functions before assigning final control signals.

🔧

Embedded Data Acquisition and Control

A Z86C9012PEC-based module can combine external program memory with sensors and converters to implement a compact data-acquisition front end. The 8-bit architecture handles digital status acquisition and supervisory control, while the 12 MHz clock supports polling of slow and medium-speed external devices. The through-hole DIP package is particularly useful where equipment was designed around a replaceable controller and service technicians expect socketed parts. A practical implementation still needs verified port multiplexing, input levels, conversion timing, and isolation requirements. Use the manufacturer pin-description table and timing characteristics to prevent bus contention and to size pull-up or termination networks correctly.

🔧

Legacy Communication Gateway Boards

The Z86C9012PEC may be used in older gateway or protocol-conversion equipment where a compact 8-bit controller supervises a communications link and external memory. At 12 MHz, the part can manage byte-level framing, status LEDs, configuration registers, and handshaking tasks in designs that do not require a modern high-performance MCU. The ROMless configuration keeps firmware in replaceable external memory, which is advantageous for field configuration. Because communications timing is sensitive to bus loading and interrupt latency, confirm the available port assignments and external-interface timing against the Zilog datasheet. Maintain clean supply routing and controlled impedance at any connector or transceiver interface.

🔧

Equipment Repair and Obsolescence Mitigation

The Z86C9012PEC is particularly useful for extending the service life of equipment built around a 40-pin DIP controller, especially where redesigning the board would be more disruptive than replacing one component. Its 8-bit Z8 architecture, 12 MHz clock rating, and industrial through-hole package preserve the mechanical and functional continuity of the original platform. Because it is ROMless, verify that external program memory remains available or can be replicated on the replacement assembly. Request lot and lifecycle information through the Request a Quote form, and validate reset, clock, and supply behavior on a known-good board before deploying the part in production equipment.

What is the ZiLOG Z86C9012PEC?
The ZiLOG Z86C9012PEC is an 8-bit Z8 ROMless microcontroller with a 12 MHz maximum clock rating in a 40-pin through-hole plastic DIP package. According to Zilog product documentation, the PEC configuration is intended for industrial-temperature operation. Because the controller is ROMless, an external program-memory device is required to hold the application firmware.
What is the operating frequency of Z86C9012PEC?
The Z86C9012PEC operates at a maximum rated clock frequency of 12 MHz. This rating identifies the CPU clock capability rather than a required clock frequency; a system may run below the maximum when timing margin, power consumption, or peripheral limits require it. Confirm the permitted oscillator and clock configuration in the Zilog electrical characteristics before finalizing the clock circuit.
Does Z86C9012PEC contain internal ROM?
No, the Z86C9012PEC is a ROMless microcontroller and does not execute its application program from internal mask ROM. Firmware must be placed in external program memory and accessed through the controller's memory interface. This arrangement is useful for field-programmable designs because memory capacity can be selected according to code size rather than fixed by the MCU part number.
What package does Z86C9012PEC use?
The Z86C9012PEC uses a 40-pin rectangular plastic DIP package with through-hole terminals. Component listings identify the terminal form as through-hole, the package code as DIP, and the temperature grade as industrial. This makes the device mechanically appropriate for existing 40-pin DIP layouts, socketed assemblies, and through-hole repair work.
Where can I find the Z86C9012PEC pinout?
Use the pin-description table and package drawing in the Zilog manufacturer datasheet to assign signals and PCB tracks. The Z86C9012PEC has 40 physical terminals, but individual port, control, clock, ground, and supply names should be transcribed from the official pin table. The component-search datasheet link on this page provides an additional route to the device documentation and package diagrams.
Where do I download the Z86C9012PEC datasheet PDF?
The Z86C9012PEC datasheet can be reached through the datasheet link on this page or through the manufacturer listing for the device. The document should include the pin-description table, DC characteristics, timing information, external-memory interface details, and package drawing. Use the manufacturer document as the controlling reference for ratings and firmware-related interface behavior.
Can Z86C9012PSC replace Z86C9012PEC?
The Z86C9012PSC is not a safe footprint-only substitute for the Z86C9012PEC because the package suffix indicates a different physical package configuration. Although both devices belong to the Z86C9012 family and may share core functions, a PCB replacement also requires identical lead count, lead spacing, pin functions, and electrical behavior. Confirm the package drawing and pinout before considering any change.
Is SC80C31BCCN40 a drop-in replacement for Z86C9012PEC?
SC80C31BCCN40 may be considered for a redesign comparison because it is listed in a direct part comparison with a related Z86C9012 variant, but it should not be treated as an automatic drop-in replacement. The two devices use different architectures and toolchains, so port mapping, interrupt behavior, memory interfacing, timing, and firmware require independent verification. A pin-compatible claim alone does not establish functional equivalence.
When should I choose Z86C9012PEC over a modern surface-mount MCU?
Choose the Z86C9012PEC when maintaining an existing 40-pin through-hole industrial design, repairing aging equipment, or preserving an established external-memory and I/O layout is more important than minimizing board area. A modern MCU may be smaller and faster, but it generally requires a new footprint, different power and clock planning, and a revised software port. Choose the legacy DIP controller for continuity rather than new compact designs.
Is Z86C9012PEC suitable for industrial control systems?
The Z86C9012PEC is identified as an industrial-temperature-grade controller in a 40-pin through-hole DIP package, making it appropriate for legacy industrial control applications that use that footprint. Suitability for a particular machine also depends on supply voltage, noise immunity, peripheral timing, environmental requirements, and the availability of an external program-memory solution. Review those conditions against the Zilog operating specifications before installation.
What is the best drop-in replacement for Z86C9012PEC?
The closest replacement is an exactly pin-compatible 40-pin DIP Z86C9012 configuration, provided its package drawing, supply rating, clock requirements, and pin functions match. Cross-brand controllers such as SC80C31BCCN40 require a firmware and hardware review rather than a simple board substitution. For a production release, use the Request a Quote form to request availability and documentation for the exact MPN.
What can replace Z86C9012PEC?
A replacement for the Z86C9012PEC must first match the 40-pin DIP footprint and then satisfy the electrical and firmware requirements of the original design. Same-family devices can simplify the search, while a cross-brand MCU can require new external-memory logic and a complete software port. Treat a working substitute as an engineering conversion rather than a purely purchasing substitution.
Is Z86C9012PEC the same as Z86C9012PEG?
No, Z86C9012PEC and Z86C9012PEG have different package suffixes and therefore different physical mounting configurations. The PEC device is identified as a 40-pin through-hole DIP, whereas PEG denotes a different package option that cannot be inserted into a DIP footprint. Both may be members of the same controller family, but they are not interchangeable on an unchanged PCB.
What are the key specifications of Z86C9012PEC that engineers should know?
The Z86C9012PEC combines an 8-bit Z8 CPU, a 12 MHz maximum clock rating, ROMless operation, and a 40-pin industrial through-hole DIP package. The ROMless architecture means the board must include external program memory. Because this is a legacy-style controller, supply voltage, port allocation, timing, pin names, and peripheral functions must be checked directly against the manufacturer datasheet before schematic release.
Where can I buy Z86C9012PEC and check current availability?
Use the Request a Quote form on this page to request the current price, stock position, and delivery schedule for Z86C9012PEC. Because availability for legacy ROMless controllers can vary by lot and package configuration, confirm the exact ordering code and manufacturer documentation with the quote response. The form provides a direct purchasing path without relying on static price tables.
What is the lead time for Z86C9012PEC?
The current lead time for Z86C9012PEC should be confirmed through the Request a Quote form on this page. Lead time depends on remaining manufacturer inventory, lot traceability, and the quantity requested. For repair or production planning, include the target build quantity and required delivery date in the quote request so the supplier can confirm the available supply and packaging arrangement.

Datos de referencia de ingeniería para Z86C9012PEC — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the Z86C9012PEC when maintaining or repairing equipment that already uses a 40-pin through-hole Z86C9012 controller and requires the original 8-bit Z8 firmware environment. Its 12 MHz clock rating and industrial-grade designation suit legacy industrial control, instrumentation, sequencing, and peripheral-controller boards. Verify external program-memory requirements, supply limits, and pin functions before release because the ROMless configuration cannot run firmware from internal ROM alone.

Consider SC80C31BCCN40 only when its 40-pin DIP footprint and electrical timing have been confirmed and the firmware and toolchain can be ported. A different MCU architecture can change interrupt behavior, port mapping, timing, and external-memory control, so it is a redesign candidate rather than an automatic drop-in part. Avoid same-family devices with PEG or PSC suffixes on an unmodified DIP board because their package suffixes indicate different physical configurations. For new space-constrained products, a modern surface-mount MCU usually offers a smaller footprint, but it requires a new PCB layout, revised firmware, and complete electrical validation.

Comparación con alternativas

Parámetro Este producto SC80C31BCCN40
Brand ZiLOG Microchip Technology
Package 40-pin through-hole DIP 40-pin DIP
Microcontroller Architecture 8-bit Z8 8-bit MCU architecture
Mounting Style Through-hole Through-hole
Number of Terminals 40 pins 40 pins

Diferenciadores clave

  • Preserves a 40-pin through-hole legacy footprint (frente a SC80C31BCCN40)
  • Uses an established 8-bit Z8 control architecture (frente a SC80C31BCCN40)
  • Supports external firmware storage for lifecycle management (frente a SC80C31BCCN40)

Notas de diseño

Treat a matching DIP outline as only the first stage of substitution. Confirm that external address and data-bus lines, control signals, reset, clock, and supply pins have the same electrical functions. The ROMless Z86C9012PEC also requires external program memory, so an alternative with a different memory architecture may need new address-decoding logic and firmware rather than a direct component swap.

Follow the manufacturer land pattern for the 40-pin through-hole package and maintain a socket or plated-through-hole footprint that matches the original assembly. Verify lead spacing and row spacing on the PCB rather than estimating from a photograph. DIP packages require adequate pin-1 orientation marking and clearance around the component for soldering, inspection, and socket removal during service.

Use the Zilog DC characteristics to select the supply range, decoupling capacitors, and reset network. Because the device executes firmware from external memory, poor supply or bus timing can appear as unstable program execution rather than a simple reset fault. Keep the external memory and controller supply routing compact, and confirm that the clock and reset paths meet the manufacturer's timing recommendations.

Account for bus capacitance and signal settling when external memory is located away from the controller. Use the documented address, data, and control timing to establish setup and hold margins, and avoid long unprotected branches on multiplexed lines. If the board includes relays, solenoids, or long external cables, isolate noisy returns and provide suitable protection so switching transients do not corrupt the address or data bus.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The controller is identified as industrial-temperature grade, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declarations are stated for this exact ordering code.

Datos verificados el: 2026-11-17 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

Z86C9012PEC datasheet Z86C9012PEC pinout Z86C9012PEC datasheet pdf Z86C9012PEC 40 pin DIP Z86C9012PEC 12MHz ROMless microcontroller Z86C9012PEC equivalent Z86C9012PEC replacement Z86C9012PEC drop-in substitute Z86C9012PEC vs SC80C31BCCN40 ZiLOG Z86C9012PEC Z86C9012PEC price Z86C9012PEC stock Z86C9012PEC industrial controller Z86C9012PEC schematic

Componentes & términos relacionados

ZiLOG Z86C9012PEC Z86C9012PSC Z86C9012PEG SC80C31BCCN40 Z8 Microcontroller 8-bit microcontroller ROMless architecture external program memory 12 MHz clock 40-pin DIP plastic through-hole package industrial temperature grade Z8 CPU embedded control industrial instrumentation legacy control board programmable instrument motor sequencing controller data acquisition communication gateway external memory interface obsolescence mitigation lead-free status RoHS compliance
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ