ADC/DAC
محصولات (3,100+)
ADV7128KR80 - 80MHz 10-Bit Video DAC | Analog Devices
The Analog Devices ADV7128KR80 is a CMOS video-speed digital-to-analog converter operating up to 80 MHz, with a 10-bit pixel input port and high-impedance analog current-source outputs in a 28-pin SOIC package. It operates from a single +5 V supply, accepts TTL-compatible digital inputs, and requires an external 1.23 V reference and pixel-clock input. Its outputs are compatible with RS-343A and RS-170 video systems. A video DAC is a mixed-signal semiconductor that converts parallel digital pixel data into an analog video signal. It belongs to the DAC and digital-to-analog converter hierarchy, which sits within ADC/DAC and broader data-conversion semiconductor categories. The ADV7128 combines a high-speed digital input interface, a 10-bit converter core, and analog current-source outputs in one monolithic device, making it suitable for graphics, broadcast, and digital-video equipment. The principal features of the ADV7128KR80 are its 80 MHz pipelined operating rate, 10-bit conversion resolution, standard TTL input compatibility, and support for both RS-343A and RS-170 output standards. These characteristics allow the converter to process digital pixel streams at rates commonly encountered in high-resolution color graphics and professional video systems while retaining a straightforward digital interface. Technically, the device uses CMOS monolithic construction and produces its video signal through a high-impedance analog current source. An external 1.23 V reference establishes the converter reference level, while the pixel clock synchronizes the digital-to-analog conversion process. Because the interface is TTL-compatible and the analog output is current-based, PCB layout should minimize digital-clock noise near the output network and preserve clean reference and analog routing. Typical applications include high-definition television equipment, high-resolution color graphics systems, broadcast video conversion, digital display interfaces, and multimedia video hardware. The ADV7128 is particularly appropriate where an older RS-343A or RS-170-compatible video output is required but a modern parallel DAC with a single +5 V supply is preferred. The primary design consideration is external-component and signal-integrity planning. The 1.23 V reference, pixel clock, digital input traces, and analog output network must be routed according to the manufacturer's recommended application circuit. Proper decoupling and controlled impedance are necessary to prevent digital switching activity from degrading video quality. This product data combines verified manufacturer information, distributor listings, lifecycle observations, and engineering guidance to clarify where the ADV7128KR80 fits. It also distinguishes verified drop-in alternatives from package or suffix changes that cannot safely be assumed as replacements.
ADV7129KS - 360 MHz Triple 8-Bit Video DAC | Analog Devices
The Analog Devices ADV7129KS is a 360 MHz, 24-bit true-color video digital-to-analog converter with triple 8-bit DACs, an onboard phase-locked loop, an internal voltage reference, and a programmable 192-bit pixel port. It is supplied in a 304-lead PQFP package and operates from a single +5 V CMOS supply. The device supports RS-343A and RS-170 compatible analog outputs and TTL-compatible digital inputs, making it a consolidated solution for high-resolution graphics and imaging systems. A video DAC is a digital-to-analog converter specifically optimized for reconstructing analog red, green, and blue video signals from digital pixel data. Within the broader hierarchy of DAC → converter IC → data-conversion semiconductor, it combines parallel digital input, color conversion, clock generation, reference circuitry, and three analog output channels in one monolithic device. This integration reduces the component count and simplifies synchronization in professional video, graphics, and imaging equipment. The ADV7129KS supports 360 MHz operation in 24-bit true-color mode and uses an 8:1 input multiplexing arrangement. Its programmable 192-bit pixel port accommodates different pixel organizations, while the internal voltage reference and onboard PLL reduce external support circuitry. The DAC-to-DAC matching specification is typically 2% and is adjustable to 0.02%, according to the manufacturer datasheet. The three 8-bit converters produce separate red, green, and blue analog outputs from shared pixel data. Eight-to-one multiplexing allows a compact digital interface to feed the high-speed converters, and the onboard PLL provides clocking from an external reference. The S-304 package is a 304-lead PQFP, and the ordering guide identifies ADV7129KS for the 0°C to +70°C temperature range. Typical uses include high-resolution graphics systems, medical imaging, professional video equipment, digital signage, broadcast monitoring, and industrial imaging. The integrated reference and PLL are particularly useful where component count, synchronization, and analog-output matching matter more than low cost or minimal power consumption. When designing around this DAC, preserve the high-speed pixel and clock routing implied by the 304-pin PQFP footprint and use controlled-impedance PCB layout. Differential clocking, short analog traces, suitable grounding, and decoupling close to the supply pins are essential for dependable output performance at the device's 360 MHz capability. This page combines verified manufacturer specifications, distributor pricing, same-package replacement analysis, and practical PCB guidance to support component selection and board-level implementation.
ADV7195KS - 3-Channel 11-Bit Video DAC Encoder | Analog Devices
The Analog Devices ADV7195KS is a triple high-speed digital-to-analog video encoder with three 11-bit DACs and a 10-bit digital data input interface. Designed for progressive-scan and HDTV video systems, the device accepts YCrCb data and supports 2 x 10-bit 4:2:2 or 3 x 10-bit 4:4:4 input formats. It is supplied in a 52-lead MQFP package identified by the KS package suffix. A video DAC is an interface-integrated data converter that transforms digital YCrCb video samples into three analog color-component outputs. Within the broader signal-chain hierarchy, the ADV7195 belongs to the video encoder family, which combines digital-to-analog conversion with color encoding. This makes it suitable for professional video equipment, broadcast infrastructure, display-generation systems, and other multichannel analog-video applications where three coordinated outputs are required. The verified part description identifies three high-speed video D/A converters with TTL-compatible inputs. It also identifies progressive-scan and HDTV encoder operation with a 10-bit data input. These features distinguish the ADV7195 from lower-resolution or single-channel DAC solutions. The manufacturer data supplied for this record does not include a complete electrical limit table, so individual voltage, timing, clock, output, and temperature values remain marked for data collection rather than being inferred. The device uses YCrCb component coding, with the verified input options covering 4:2:2 and 4:4:4 arrangements. In practical systems, the input architecture must match the source format and resolution. The three-channel organization supports separate analog outputs for the luma-related and chroma-related video signals, while the exact sync and blanking implementation must be established from the manufacturer datasheet and application schematics before layout is released. Typical uses include professional broadcast monitors, video test and measurement equipment, HDTV production infrastructure, progressive-scan display systems, and video signal-generation equipment. In each case, the ADV7195KS can combine a digital video source with three DAC channels while preserving the intended progressive-scan or HDTV signal architecture. System designers should still validate timing, DAC settling behavior, output compliance, and synchronization against their specific source and load requirements. The most important design consideration is interface verification. Because the available verification identifies a 52-lead MQFP package but does not provide a complete authoritative pin table, the pinout should be checked directly against the Analog Devices datasheet before PCB routing. Input timing, DAC output reference, supply rails, decoupling, and unused-pin handling must also follow the datasheet rather than assumptions based only on generic video-encoder practice. This page consolidates the verified ADV7195KS function, package information, lifecycle evidence, sourcing references, and cross-reference candidates into an engineering-focused product record. It also distinguishes confirmed drop-in alternatives from related encoder families that may require different packages or verification, helping procurement and design teams avoid treating functional similarity as guaranteed pin compatibility.
ADV7202KST - 12-Bit 5-Channel Video Codec | Analog Devices
The Analog Devices ADV7202KST is a 12-bit simultaneous-sampling video-rate sampling codec capable of sampling up to five NTSC, PAL, or SECAM composite video input signals. The device combines one analog-to-digital converter, four digital-to-analog converters, a 64-pin LQFP package, and front-end resolution in which two of the 12 bits are assigned to gain and offset adjustment. It is designed for multi-channel analog video acquisition, conversion, and reconstruction systems. A video codec is a mixed-signal interface IC that converts analog video into digital data and can also produce analog video outputs. In the signal-processing hierarchy, the ADV7202 belongs to the codec family, interface IC class, and broader data-conversion semiconductor category. Its five-input capability allows one device to support several standard-definition video sources, while its four DAC outputs support reconstruction or monitoring paths. The principal verified features include simultaneous sampling of up to five composite video inputs, 12-bit front-end digitizer resolution, four video DAC channels, and 12-bit/10-bit digital data capability. The package is specified as 64-pin LQFP, also described in search data as PQFP64 or plastic LQFP-64. This integration can reduce the number of separate converters required in a video system, although exact timing, voltage, clock, output-format, and thermal details must be confirmed from the manufacturer documentation. The architecture is suited to systems that need a consolidated analog-video interface rather than discrete converters. Simultaneous sampling is important when multiple composite signals must share a defined acquisition moment, while the multiple DACs provide parallel analog-output capability. Digital resolution, clocking, sync handling, and supported video standards remain critical system constraints that depend on the selected operating mode and the complete ADV7202 datasheet. Typical uses include professional video test equipment, broadcast video monitoring, surveillance-system interfaces, video capture hardware, and multi-source analog-video switching systems. The component is particularly relevant when the board must ingest multiple composite video streams and retain flexible digital processing before conversion back to analog. Product selection should also account for source format, required resolution, supported clock, interface voltage, thermal conditions, and system timing. A practical design review begins with the ADV7202 datasheet pinout, electrical tables, timing diagrams, and application guidance. PCB layout should preserve analog and digital return paths, provide appropriate decoupling, and route high-speed digital signals with controlled impedance. Since the verified data does not include complete pin assignments or operating limits, engineers should not infer those values from generic codec designs. This page combines verified product, package, interface, and sourcing information with transparent data gaps, procurement guidance, and application-oriented engineering context. It distinguishes confirmed ADV7202KST facts from unverified parameters so designers can evaluate the codec efficiently without mistaking distributor summaries for a complete datasheet.
ADV7202KSTZ - 54 MHz Video Codec | Analog Devices | LQFP-64
Analog Devices ADV7202KSTZ is a simultaneous-sampling video-rate codec with one 12-bit video ADC, four 10-bit video DACs and a 54 MHz conversion rate, packaged in a 64-lead LQFP measuring 10 mm by 10 mm. It accepts up to five NTSC, PAL or SECAM composite video inputs and includes an 843 kHz SAR ADC for auxiliary system-monitoring inputs. The device supports 4:2:2, YCrCb and RGB/I/P video formats. A video codec is an interface IC that converts analog composite video into digital video samples and converts digital video back into analog output signals. This codec belongs to the broader ADC/DAC and video-interface hierarchy within integrated circuits. It combines a multi-channel video digitizer, four reconstruction DACs, analog clamp control and programmable gain control in one device, reducing the number of separate converters required by a video processing system. The main features include four 10-bit video DACs, 12-bit video digitization with two bits assigned to gain and offset adjustment, a 54 MHz conversion rate, and AGC control with a 6 dB range. The auxiliary SAR ADC can sample as many as eight inputs at 843 kHz for monitoring functions. A three-channel clamp control supports the composite-video front end, while five CVBS inputs allow multi-source conversion in professional and industrial video equipment. The ADV7202 architecture is intended for simultaneous conversion of several composite video channels. Its 12-bit ADC front end provides greater nominal resolution than the 10-bit output DACs, while AGC and clamp control help normalize signal level and remove video pedestal offsets. The four DACs support standard video output formats, allowing digitized channels to be processed and reconstructed without requiring four separate output converter packages. Typical uses include video surveillance systems, broadcast and professional video monitoring, industrial inspection equipment, video routers, security-camera interfaces and multichannel analog-video test systems. Simultaneous conversion is particularly useful when multiple composite sources must be captured at the same time for switching, recording, analysis or frame synchronization. PCB design should preserve short analog traces, provide stable analog and digital supplies, and place decoupling capacitors close to the relevant supply pins. Keep high-speed digital and analog-video return paths away from sensitive input traces, follow the reference-layout guidance in the manufacturer datasheet, and use controlled-length clock and serial-interface routing. Decoupling requirements, clock topology and unused-pin handling should be implemented exactly as specified in the datasheet pin-description table. This page consolidates the Analog Devices product information, exact package and conversion details, a verified same-family replacement candidate, and practical interface-layout guidance into a focused engineering reference for evaluating the ADV7202KSTZ in composite-video and multichannel monitoring designs.
ADV7303AKST - 6-Channel 11-Bit Video DAC | Analog Devices
Analog Devices ADV7303AKST is a multiformat SD, progressive-scan and HDTV video encoder with six 11-bit digital-to-analog converters in a 64-lead LQFP surface-mount package. It combines digital video encoding with analog baseband output generation, making it suitable for professional and broadcast video systems that require multiple video channels in one device. The ADV7303AKST operates from 2.5 V or 3.3 V supplies according to marketplace technical listings. A video DAC is a mixed-signal semiconductor that converts digitally represented image data into analog television signals. The ADV7303AKST belongs to the video encoder and DAC hierarchy: it accepts digital video information, performs required signal generation, and provides six analog output channels. This integration can reduce the component count and board area in systems that previously required separate video-output converter stages. The principal identified feature is six 11-bit DACs. Each converter provides a defined digital resolution for multiformat standard-definition, progressive-scan, and HDTV video generation. The device also supports PAL and NTSC video standards according to component listings, while its 64-LQFP package provides 64 electrical terminals for power, control, digital data, clocking, and analog-output connections. At the system level, the six outputs allow a single encoder to serve several analog video destinations or support multi-channel signal generation. The 11-bit converter resolution provides a more detailed digital-to-analog transition than lower-resolution video output stages, while the multiformat architecture allows the same encoder family to address different television standards and progressive-scan equipment. Typical applications include broadcast television equipment, SD and HDTV video production systems, professional video routers, television signal processing, monitoring infrastructure, and multichannel video test equipment. System integrators should verify signal timing, output standard configuration, DAC output levels, filtering, and synchronization against the manufacturer’s complete interface and application information before releasing production hardware. A critical implementation consideration is that video output quality depends on the complete analog path, not only on the nominal DAC resolution. Keep output routing short, maintain a controlled ground reference, and implement the manufacturer-recommended power and bypass networks close to the device. Because no single replacement was confirmed for this exact package and function, board compatibility should be established through schematic and pin-level review rather than assumed from a similar device description. The ADV7303AKST provides a compact six-channel video-output solution for systems requiring multiformat analog television generation. Its six 11-bit DACs, SD and progressive-scan capability, HDTV positioning, and 64-LQFP integration distinguish it from discrete video DAC arrangements and help reduce board complexity when a single multi-output encoder is preferable to separate converter channels.
ADV7314KST - 216 MHz Video Encoder with Six 14-Bit DACs | Analog Devices
The Analog Devices ADV7314KST is a multiformat 216 MHz video encoder with six 14-bit NSV DACs in a 64-lead LQFP package. It accepts parallel YCrCb high-definition input in 4:2:2 and 4:4:4 formats and supports SMPTE 293M 525p, BTA EDTV2 525p, ITU-R BT.1358 625p/525p, and ITU-R BT.1362 625p/525p video standards. Its integrated six-channel DAC architecture produces analog video outputs while supporting 216 MHz operation. A video encoder is an interface IC that converts digital component video into one or more analog output signals. The ADV7314KST belongs to the broader DAC and video-encoding hierarchy: digital video data enters through parallel YCrCb inputs, internal encoding and DAC circuitry generate composite or component outputs, and the resulting analog signals drive downstream display or broadcast equipment. Its 14-bit DAC resolution provides a defined numerical output-resolution characteristic for professional video systems. Key features include six 14-bit NSV video DACs, a 216 MHz operating specification, and parallel YCrCb input compatibility. The device supports both 4:2:2 and 4:4:4 high-definition input formats. Multiple listed television standards provide defined support for 525-line and 625-line systems, including SMPTE 293M, BTA EDTV2, ITU-R BT.1358, and ITU-R BT.1362. The 64-lead LQFP package supports surface-mount assembly and is identified as lead-free. Technically, the ADV7314KST combines digital video processing with six high-speed, multiformat NSV digital-to-analog converters. This integration reduces the number of discrete DAC channels required in a multichannel analog-video design. The 216 MHz headline specification identifies the device as intended for high-speed video processing, while the six-DAC configuration allows multiple video outputs to be generated from one package. Exact output current, DAC noise, power-supply limits, temperature limits, and timing values are not present in the supplied verified records and should be confirmed in the manufacturer datasheet before design release. Typical uses include professional broadcast video conversion, standard-definition television equipment, high-definition production electronics, video test and measurement systems, and digital-to-analog video processing modules. The 4:2:2 and 4:4:4 input support makes it relevant to systems handling subsampled and full-resolution chroma video. Six integrated DACs can reduce board area when the design requires six analog video channels rather than separate converter packages. Designers should confirm the exact pin assignments, output-routing options, synchronization requirements, supply rails, decoupling recommendations, and analog-video output topology against the ADV7314 manufacturer datasheet. PCB layout should preserve controlled clock and digital-video signal paths while providing a low-impedance return for each DAC output. Because the supplied search results do not provide a verified price, stock quantity, complete pinout, or detailed electrical limits, those items should not be inferred from generic distributor listings. This product page consolidates the verified multiformat 216 MHz specification, six 14-bit NSV DAC configuration, supported video standards, package information, source links, and same-family replacement guidance. It also distinguishes verified features from unavailable parameters and provides selection and comparison context that is not contained in the short distributor snippets.
ADV7344BSTZ - 6-Channel 14-Bit Video DAC | Analog Devices
Analog Devices ADV7344BSTZ is a multiformat video encoder containing six 14-bit noise-shaped video DACs, operating from a 3.3 V supply and supporting 74.25 MHz 20-bit or 30-bit high-definition digital video input. The device is packaged in a 64-LFCSP-VQ surface-mount package measuring 9 mm by 9 mm. Its six converter channels support composite CVBS, S-Video YC, and component YPrPb or RGB analog outputs. A video encoder is a signal-conversion integrated circuit that transforms digital video data into analog television signals. In the signal-chain hierarchy, the ADV7344BSTZ sits between a digital video source and an analog display or broadcast subsystem. Noise-shaped DAC architecture reduces unwanted high-frequency spectral content, while oversampling and digital reconstruction filters shape the analog output spectrum. The converter therefore belongs to the broader ADC/DAC, signal-processing IC, and power-management-adjacent semiconductor categories. The principal features include six independent 14-bit video DAC channels, 20-bit and 30-bit high-definition input support, and 16-times DAC oversampling at 216 MHz. The encoder supports standard-definition, enhanced-definition, and high-definition formats. It is compliant with SMPTE 296M for 720p and 1035i operation, as identified by the manufacturer product documentation. Six output channels also allow simultaneous generation of composite, S-Video, and component signals from one encoder. The internal noise-shaping and reconstruction architecture is intended to improve analog-video image quality while maintaining a high digital input bandwidth. The 74.25 MHz input capability accommodates common high-definition digital video streams, while the 216 MHz DAC oversampling rate supports the required reconstruction filtering. Configuration registers allow the host processor to select output formats and operating modes, reducing the need for external video-processing logic. Typical uses include DVD and Blu-ray player output stages, set-top boxes, video walls, broadcast equipment, professional video processors, and high-definition television electronics. The six-channel architecture is particularly useful when a system must provide legacy composite and S-Video connections alongside component RGB or YPrPb outputs. PCB implementation requires careful high-speed routing and controlled return paths for digital inputs and analog outputs. Place decoupling capacitors near the supply pins, keep analog output traces short and isolated from switching nodes, and use a continuous ground plane where the package and board stackup permit it. Confirm the exposed-pad connection, output load requirements, and synchronization features against the manufacturer pin-description table and application guidance. This page organizes the device's multiformat capabilities, verified specifications, application guidance, replacement constraints, and same-package comparison information into a practical engineering reference for designers evaluating legacy analog-video output requirements.
ADV7393BCPZ - 10-Bit SD/HD Video Encoder, 40-LFCSP | ADI (Tape & Reel)
The Analog Devices ADV7393BCPZ is a low-power, chip-scale 10-bit SD/HD video encoder that integrates three 10-bit video DACs and a digital video encoder on a single monolithic die. Housed in a 40-lead LFCSP-VQ (6x6 mm) package with exposed pad, the part supports composite (CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs at standard-definition and high-definition formats, operating from a single 2.7 V to 3.3 V analog and digital supply. Pricing on distributor inventories such as LCSC starts near $6.45 per unit as of October 2026. A video encoder is a data converter IC that translates digital video streams (parallel ITU-R BT.656 / BT.601, or serial HDMI-derived pixel data) into analog waveforms suitable for legacy displays, broadcast modulation, or recording onto analog media. Within the broader taxonomy it sits inside data converters (video DAC + encoder) and ultimately under interface/signal-chain ICs. The ADV7393 family targets applications that still require analog video outputs after SoC integration. Key specifications include three 2.7 V/3.3 V 10-bit video DACs, support for SD (NTSC/PAL/SECAM) and HD (720p/1080i) timing standards, a low-power sleep pin, I²C control interface, and a wide operating temperature range suitable for consumer set-top boxes, DVD/BD recorders, and video capture cards. The part is specified across -40 °C to +85 °C ambient conditions. Architecturally the device combines a digital encoder block (which inserts sync, blanking, and color modulation) with three current-steering DACs that drive the three analog outputs. Internal PLL-derived timing generation eliminates the need for an external pixel clock in many modes, simplifying board layout. The 40-LFCSP package and exposed thermal pad allow direct PCB thermal dissipation and short analog output traces, important at HD color bandwidths where trace impedance must be tightly controlled. Typical applications include set-top box encoder outputs, DVD and Blu-ray player composite/component video, video capture cards, and industrial test pattern sources. The single 3.3 V rail makes it straightforward to retrofit onto existing 3.3 V designs without adding an LDO. The companion ADV7390/91/92 family members share the same digital architecture and register map, allowing firmware reuse across the encoder line. When designing with this device, keep analog output traces matched to 75 ohm impedance with a 75 ohm termination at the load connector. Place decoupling capacitors immediately adjacent to AVDD and DVDD pins, and tie the exposed thermal pad to a clean analog ground plane. For HD formats, use the 2 x oversampling mode to ease analog filter requirements. This page consolidates distributor pricing, drop-in same-family alternatives (ADV7390/91/92), and practical design notes not found in the manufacturer datasheet alone.
ADV7393BCPZ-REEL - 10-Bit SD/HD Video Encoder, 40-LFCSP | ADI
The Analog Devices ADV7393BCPZ-REEL is a low-power, chip-scale 10-bit SD/HD video encoder that integrates three 10-bit video DACs and a digital video encoder on a single monolithic die. Housed in a 40-lead LFCSP-VQ (6x6 mm) package with exposed pad, the part supports composite (CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs at standard-definition and high-definition formats, operating from a single 2.7 V to 3.3 V analog and digital supply. Pricing on distributor inventories such as LCSC starts near $6.45 per unit as of October 2026. A video encoder is a data converter IC that translates digital video streams (parallel ITU-R BT.656 / BT.601, or serial HDMI-derived pixel data) into analog waveforms suitable for legacy displays, broadcast modulation, or recording onto analog media. Within the broader taxonomy it sits inside data converters (video DAC + encoder) and ultimately under interface/signal-chain ICs. The ADV7393 family targets applications that still require analog video outputs after SoC integration. Key specifications include three 2.7 V/3.3 V 10-bit video DACs, support for SD (NTSC/PAL/SECAM) and HD (720p/1080i) timing standards, a low-power sleep pin, I²C control interface, and a wide operating temperature range suitable for consumer set-top boxes, DVD/BD recorders, and video capture cards. The part is specified across -40 °C to +85 °C ambient conditions. Architecturally the device combines a digital encoder block (which inserts sync, blanking, and color modulation) with three current-steering DACs that drive the three analog outputs. Internal PLL-derived timing generation eliminates the need for an external pixel clock in many modes, simplifying board layout. The 40-LFCSP package and exposed thermal pad allow direct PCB thermal dissipation and short analog output traces, important at HD color bandwidths where trace impedance must be tightly controlled. Typical applications include set-top box encoder outputs, DVD and Blu-ray player composite/component video, video capture cards, and industrial test pattern sources. The single 3.3 V rail makes it straightforward to retrofit onto existing 3.3 V designs without adding an LDO. The companion ADV7390/91/92 family members share the same digital architecture and register map, allowing firmware reuse across the encoder line. When designing with this device, keep analog output traces matched to 75 ohm impedance with a 75 ohm termination at the load connector. Place decoupling capacitors immediately adjacent to AVDD and DVDD pins, and tie the exposed thermal pad to a clean analog ground plane. For HD formats, use the 2 x oversampling mode to ease analog filter requirements. This page consolidates distributor pricing, drop-in same-family alternatives (ADV7390/91/92), and practical design notes not found in the manufacturer datasheet alone.
AFE5832LPZAV - 32-Ch Ultrasound AFE, 18.5mW/Ch | Texas Instruments
The Texas Instruments AFE5832LPZAV is a low-power, 32-channel analog front-end (AFE) optimized for portable ultrasound systems, integrating per-channel LNA, attenuator, low-pass filter, ADC, and a passive continuous-wave (CW) mixer in a 15 mm x 15 mm 289-pin NFBGA (ZAV) package. The device supports either 12-bit, 40-MSPS or 10-bit, 50-MSPS output and is pin-compatible with the broader AFE5832 family, enabling drop-in migration between power tiers. An analog front-end (AFE) in ultrasound systems is the analog signal chain that sits between the piezoelectric transducer and the digital beamformer/back-end processor. It typically performs low-noise amplification, time-gain compensation (TGC), anti-alias filtering, and analog-to-digital conversion. As an integrated AFE, the AFE5832LPZAV replaces a discrete multi-chip front end with a single IC, reducing board area, BOM count, and power budget - critical for handheld and cart-based ultrasound where battery life and thermal envelope are primary constraints. Key specifications include 4 nV/rt-Hz input-referred current noise, 18.5 mW per channel power dissipation, 0 dB to 48 dB total gain range via Digital Time Gain Compensation (DTGC), and an LVDS digital interface for high-speed data transfer. The LNA provides programmable gain for near- and far-field reception, and the integrated passive CW mixer supports Doppler modes without an external down-conversion stage. Architecturally, the device uses a per-channel signal chain with shared digital control and bias blocks; the LVDS output bus and the DTGC engine share a common serializer across all 32 channels. Compared with the higher-power AFE5832 (non-LP), the AFE5832LP trades absolute noise margin and maximum sample rate for a substantially lower per-channel power figure, which is essential for portable ultrasound carts operating from limited battery capacity. Typical applications include portable and handheld ultrasound imaging systems, multi-channel CW/PW Doppler receivers, and battery-powered diagnostic equipment. The 32-channel integration is well-matched to mid-density probe arrays (e.g., 32-element linear or curved arrays) used in point-of-care imaging. When designing with this part, ensure the PCB implements a continuous ground plane under the NFBGA with adequate via stitching for thermal dissipation; 289-ball BGA packages require strict reflow profile control and X-ray inspection of solder joints. The LVDS interface length should be 50 ohm differential-impedance matched and kept short to preserve signal integrity at 50 MSPS.
AK4181A - 4-Wire Touch Screen Controller, 12-bit SAR ADC | AKM
The AKM AK4181A is a 4-wire resistive touch screen controller that integrates a 12-bit successive-approximation-register (SAR) analog-to-digital converter with a maximum sampling frequency of 125 kHz. Housed in a compact TSSOP surface-mount package, the AK4181A detects pressed-screen coordinates by performing two successive A/D conversions on the touch-panel analog signals and also measures pen-pressure (Z-axis) touch force. A touch screen controller is a mixed-signal data-acquisition IC that bridges a 4-wire resistive touch panel and an embedded host MCU. The AK4181A sits in the broader signal-chain hierarchy as: touch-screen controller -> resistive-touch digitizer -> data-acquisition IC -> analog front-end -> semiconductor. By handling the analog measurement locally and presenting digital results to the host, the part removes analog switching and biasing complexity from the host firmware, an essential role in any handheld, HMI, or industrial-control system using legacy resistive panels. Key features include pen-pressure measurement (Z-axis), an on-chip thermal sensor for system-temperature monitoring, two auxiliary analog input channels for general-purpose ADC use, direct battery-voltage measurement, an on-chip 2.5 V voltage reference, and a 12-bit SAR ADC with integrated sample-and-hold. The low-power architecture supports battery-powered handheld designs, while the direct-battery-measurement channel allows the host to monitor its own supply without extra external dividers. Typical applications include resistive-touch human-machine interfaces (HMIs), handheld data terminals, industrial control panels, point-of-sale (POS) terminals, consumer electronics with resistive touch, and portable instrumentation. The auxiliary ADC inputs and on-die temperature sensor make the AK4181A useful even in systems that do not require touch input. Design consideration: the 4-wire resistive interface requires proper PCB routing to keep the X/Y drive signals away from noisy digital traces, and the SAR converter's 125 kHz maximum sampling rate limits touch-report rates to roughly a few hundred Hz. Designers should also account for the part's TSSOP thermal envelope and ESD handling at the panel connector. This page synthesizes distributor pricing, drop-in alternatives, application examples, and practical design notes not found in the manufacturer datasheet alone - giving engineers a one-stop reference for evaluating the AK4181A in new designs and as a replacement candidate in legacy 4-wire touch systems.
AK4358VQ 8-Channel 24-Bit 192kHz DAC | Asahi Kasei
The Asahi Kasei Microdevices AK4358VQ is an eight-channel, 24-bit audio digital-to-analog converter designed for high-resolution PCM and DSD playback. It supports sampling frequencies up to 192 kHz, accepts I2S digital audio data, and is packaged in a 48-LQFP package measuring 7 mm by 7 mm. The converter uses AKM's advanced multibit modulator architecture to balance dynamic range, linearity, and THD+N performance. An audio DAC is a signal-conversion IC that transforms digital PCM or DSD audio samples into continuous analog voltage signals for downstream amplifiers, headphones, line outputs, or powered speakers. Within the broader semiconductor hierarchy, the AK4358VQ is an ADC/DAC converter, an interface IC, and a signal-processing device. Its eight-channel architecture allows one converter to serve multichannel audio systems without requiring eight separate stereo output stages. The AK4358VQ provides 24-bit resolution and operation up to 192 kHz, making it suitable for CD-quality playback, high-resolution audio equipment, multichannel digital mixers, and systems requiring DSD input. Its eight-channel organization reduces system-level routing complexity when a design must support several simultaneous analog outputs. The 48-LQFP package also provides ample perimeter pins for multi-channel analog, digital, clock, and power connections. AKM's advanced multibit modulator architecture is central to the converter's audio performance. A multibit delta-sigma implementation shapes quantization noise outside the audible signal band and supports high linearity when paired with an appropriate analog output stage. The AK4358 is also identified as an eight-channel 112 dB DAC for PCM and DSD applications, making its specifications relevant to demanding digital-to-analog conversion designs. Typical uses include professional audio equipment, multichannel home-theater processors, digital mixing consoles, USB and network audio systems, and multichannel consumer electronics. In each case, the device can receive digital audio through its I2S interface and produce eight balanced or unbalanced analog channels, depending on the external application circuit and output architecture. A careful design should use the manufacturer's pin-description and application-circuit tables when assigning traces, grounding analog and digital return paths, and selecting bypass components. Clock routing, MCLK/LRCK/SCK synchronization, and analog-output filtering are equally important because correct digital timing does not by itself guarantee low-distortion analog performance. This page consolidates the verified AK4358VQ identity, package, resolution, channel count, sampling-rate, interface, and DSD characteristics with practical design guidance. It also distinguishes verified drop-in substitutes from parts that are only functionally similar, helping engineers avoid assuming that an audio converter with similar output counts is pin-compatible.
AK4373EN - 24-Bit Stereo DAC with HP/SPK Amp | AKM
The Asahi Kasei Microdevices AK4373EN is a low-power stereo 24-bit digital-to-analog converter with an integrated stereo headphone amplifier and monaural speaker driver in a 32-QFN 5 x 5 mm package. It supports I2S audio input, digital signal processing, and 48 kHz operation, making it suitable for portable audio systems, game consoles, dedicated headphone equipment, navigation products, and portable media players. An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into analog voltage signals. The AK4373EN combines three functions in one device: a stereo DAC, a stereo headphone amplifier, and a monaural speaker driver. This integration reduces the number of external analog-output blocks in portable equipment and allows the output stages to be configured for different audio use cases. The device provides 24-bit digital audio resolution with support for 48 kHz sampling and an I2S interface. These parameters are suitable for consumer audio playback paths where a compact digital interface and low-power implementation are priorities. The integrated headphone and speaker drivers allow the same converter platform to support headphones, a speaker, or other line-level audio destinations when the application circuit is configured accordingly. AK4373EN also includes digital signal-processing functionality associated with the AK4373 family. The manufacturer describes configurable output-driver use cases, allowing portable equipment designers to select operating arrangements suited to different playback conditions. The digital interface and control registers support integration with a host processor or audio controller, while the integrated analog output stages reduce board area compared with separate DAC and amplifier implementations. Typical uses include game consoles, dedicated headphone drivers, personal navigation devices, portable media players, and other portable-audio or media-player products. In these systems, the AK4373EN can provide a single audio conversion and output solution for a stereo headphone connection or a monaural speaker path. The 32-QFN 5 x 5 mm package is suitable for compact boards, although its exposed-pad construction requires careful PCB land-pattern and thermal design. When designing around the AK4373EN, verify the manufacturer pin description table, supported digital interface modes, analog output configuration, power sequencing, and bypass requirements before laying out the PCB. Keep analog output routing short, place required bypass capacitors close to their associated pins, and follow the package land pattern and exposed-pad soldering recommendations. This page consolidates the device identity, manufacturer documentation, sourcing references, and application guidance for engineers evaluating the AK4373EN.
AK4384ET - 24-Bit 192kHz Stereo DAC | Asahi Kasei
The Asahi Kasei Microdevices AK4384ET is a 24-bit, two-channel audio DAC with a 106 dB dynamic range and operation up to 192 kHz, packaged in a 16-pin TSSOP with 0.65 mm pitch. It accepts I2S digital audio and is intended for compact, cost-sensitive audio systems that require a high-performance stereo conversion stage. An audio DAC is a signal-conversion integrated circuit in the ADC/DAC category. Its function is to transform digital audio samples into an analog voltage suitable for a downstream headphone amplifier, line amplifier, mixer, or speaker system. Within the broader semiconductor hierarchy, an AK4384ET DAC belongs to the ADC/DAC class of data-conversion ICs, where resolution, dynamic range, linearity, clocking, and output filtering determine how faithfully digital audio is reproduced. The AK4384ET provides a 24-bit conversion resolution, 106 dB dynamic range, and support for sampling rates through 192 kHz. Its two-channel architecture allows simultaneous stereo playback while reducing the number of external conversion devices required. The manufacturer describes the device as a cost-and-performance solution for audio systems and uses a multibit modulator architecture to preserve linearity and improve THD+N performance. The AK4384ET uses AKM's multibit DAC architecture rather than being characterized as a basic one-bit converter. This architecture is designed to balance wide dynamic range with improved linearity. Digital audio enters through I2S-compatible logic, while the analog output stage requires appropriate filtering and signal-chain design to achieve the intended channel separation, distortion, and noise performance in the finished equipment. Typical applications include compact digital audio players, consumer audio equipment, digital mixing consoles, computer-audio accessories, and other stereo playback products. The 16-pin TSSOP package supports conventional surface-mount assembly, while the 192 kHz capability accommodates applications that require high-resolution PCM source material. Integration into a complete product also requires correct clocking, grounding, output filtering, and analog-output implementation. During PCB design, place the device close to its digital-audio source and analog output circuitry to minimize sensitive-signal routing lengths. Follow the manufacturer pin-description table for power, ground, clock, data, and analog-output connections. Decoupling and analog-filter component values should be taken directly from the manufacturer reference circuit rather than inferred from generic audio-DAC layouts. This page consolidates the exact AK4384ET identity, package information, resolution, channel count, sampling-rate capability, and documented conversion characteristics into an engineering-focused selection guide. It also separates confirmed attributes from parameters that require confirmation from the manufacturer datasheet, helping designers assess fit before beginning a layout, prototype, or production qualification.
AK4385ET - 24-Bit 192kHz Stereo DAC | AKM
The Asahi Kasei Microdevices/AKM AK4385ET is a 24-bit, 192 kHz, two-channel delta-sigma digital-to-analog converter with a 108 dB dynamic range and an I2S interface, housed in a 16-pin TSSOP package with 0.65 mm pitch. It supports a 5 V supply and operating temperatures from -20°C to +85°C. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage suitable for audio amplification, headphones, speakers, line-level inputs, or digital recording equipment. Within the broader semiconductor hierarchy, the AK4385ET is an audio data-converter IC and a specialized member of the ADC/DAC family. Its two-channel architecture supports stereo audio conversion without requiring two separate external DAC packages. The principal performance characteristics are 24-bit resolution, a maximum sampling rate of 192 kHz, 108 dB dynamic range, and full differential SCF outputs. The 24-bit interface accommodates high-resolution digital audio data, while the 192 kHz capability supports high-rate studio, mastering, broadcast, and consumer applications. Full differential outputs can also remove the need for AC-coupling capacitors in suitable output networks. AKM describes the AK4385 as using a multibit modulator architecture to preserve linearity and improve THD+N performance. The I2S interface makes the device suitable for systems that transmit PCM audio data from a digital audio processor, receiver, decoder, or source. The compact 16-pin TSSOP outline supports surface-mount assembly while providing separate connections for the two-channel interface, supplies, clock signals, and analog outputs. Typical uses include professional digital mixers, multichannel audio processors, high-resolution music players, home-theater equipment, recording interfaces, and digital audio monitoring. In stereo systems, the converter can provide left and right analog outputs from a common digital source. In multichannel equipment, several devices may be used when more than two channels are required, subject to the interface and clock design described in the manufacturer datasheet. Designers should follow the pin-description table, recommended application circuit, and interface timing diagrams in the AK4385 datasheet before assigning PCB signals. Keep the digital clock and data traces away from the analog outputs, use the specified decoupling arrangement, and observe the required relationship between the audio master clock and the I2S source clock. The differential outputs should use the manufacturer-recommended load and reconstruction network rather than an improvised output stage. This product page combines the exact AK4385ET specifications, package information, interface characteristics, application guidance, and design cautions needed to evaluate the converter before schematic capture. It also highlights where the datasheet must be consulted for the complete pin map, timing limits, recommended circuit, and electrical-characteristic test conditions.
AK4386ET - 24-Bit 96kHz Stereo Audio DAC | AKM
AKM Semiconductor AK4386ET is a 24-bit, two-channel, low-voltage, low-power stereo delta-sigma digital-to-analog converter with a 96 kHz sampling rate and an I2S interface, housed in a 16-pin TSSOP package. It achieves 100 dB dynamic range during 3 V operation. A stereo DAC converts digital audio samples into left- and right-channel analog signals for subsequent amplification and speaker or headphone drive. The AK4386 belongs to the delta-sigma DAC hierarchy, where a multi-bit internal architecture and digital reconstruction filters shape the output waveform. This component therefore fits between an audio source and an analog output stage in portable, home-audio, set-top-box, and similar digital audio systems. The AK4386 uses AKM's Advanced Multi-Bit Delta-Sigma architecture. According to the AK4386 manufacturer datasheet, this architecture provides a dynamic range of 100 dB at a 3 V supply. The device combines SCF and CTF filters to improve performance in systems experiencing excessive clock jitter. Its 24-bit resolution supports high-resolution digital audio, while the two-channel organization covers standard stereo playback in one compact device. The AK4386 operates from a single supply in the 2.2 V to 3.6 V range, making it appropriate for low-voltage portable equipment. Its electrical interface includes I2S, a common serial format for transferring audio data between digital signal processors, audio processors, and converters. The datasheet identifies the AK4386 as a low-voltage, low-power component designed for portable audio systems including MP3 equipment, as well as home-audio systems such as set-top boxes. Typical uses include portable music players, home-audio equipment, digital set-top boxes, game-console audio paths, and other embedded stereo audio products. The 16-pin TSSOP package supports conventional surface-mount assembly, while a 0.650 mm pin pitch provides a compact footprint for space-constrained boards. The reel packaging format is intended for automated component placement and high-volume production. When designing a circuit around the AK4386, treat clock quality, supply stability, and analog-output grounding as integral parts of the audio path. Keep the converter and its decoupling close to the audio source, follow the manufacturer pin-description table for every connection, and reserve quiet analog routing for the left- and right-channel outputs. Digital and analog return currents should not share a noisy path. This page consolidates the AK4386ET electrical characteristics, package information, application guidance, pin-data status, and drop-in-replacement analysis. It also identifies where engineering decisions depend on the manufacturer datasheet, including clocking, filter configuration, analog output implementation, and PCB layout.
AK4388VT - 24-Bit 192kHz Stereo DAC | Asahi Kasei
Asahi Kasei Microdevices AK4388VT is a 24-bit, 192kHz, two-channel digital-to-analog converter for high-performance audio systems. It uses AKM's multibit modulator architecture to provide a wide dynamic range and strong linearity while targeting cost-sensitive consumer and professional audio equipment. The device is supplied in tape-and-reel packaging for automated surface-mount assembly. A DAC is a digital-to-analog converter, a category of audio signal-conversion IC that transforms digital audio samples into an analog voltage suitable for headphone, line-level, or power-amplifier inputs. Within the broader product hierarchy, the AK4388VT belongs to the ADC/DAC class of integrated circuits and supports digital-audio signal chains that require simultaneous conversion of two channels. The AK4388's headline capabilities are 24-bit resolution, a maximum sampling frequency of 192kHz, and two-channel output. These specifications make the converter suitable for hi-fi playback, home-theater equipment, digital mixing, USB audio interfaces, and powered speakers. The dual-channel architecture allows left and right program channels to be converted through one integrated device while retaining a compact surface-mount footprint. AKM's multibit modulator architecture is intended to balance dynamic range, linearity, and implementation cost. Unlike a simple binary-weighted converter, a multibit approach can reduce quantization-related distortion and support improved THD+N performance. The AK4388 is therefore positioned between basic consumer converters and more specialized audio DACs used in high-end measurement equipment. Typical applications include consumer hi-fi playback, compact home-theater systems, active speakers, digital audio mixers, and multi-channel audio products with stereo output stages. In these systems, the converter accepts interleaved digital audio data and produces left and right analog outputs. The host processor or audio interface must supply a compatible digital interface, while the analog section must provide appropriate filtering, grounding, and output amplification. The primary design consideration is matching the digital interface, clocking, and analog implementation to the manufacturer's application guidance. Keep power and ground connections short, place decoupling capacitors close to the device, and use a clean low-noise supply because converter performance can be affected by clock jitter, reference quality, PCB return paths, and analog-output loading. This product page organizes the verified AK4388VT characteristics, sourcing information, design guidance, application context, and compatibility limitations into one engineering reference. It also distinguishes confirmed device identity from parameters that require consultation of the manufacturer datasheet before schematic release or production qualification.
AK4393VF - 24-Bit Stereo Audio DAC | Asahi Kasei Microdevices
The Asahi Kasei Microdevices AK4393VF is a 24-bit stereo delta-sigma digital-to-analog converter with a 3 V to 5.25 V analog and digital supply range, I2S audio input, and a 28-pin VSOP package. The manufacturer positions the device for high-performance digital audio, including DAT and DVD applications using its advanced multi-bit delta-sigma architecture. An audio DAC is a converter that transforms digital PCM samples into analog voltage signals suitable for audio amplification and speaker systems. The AK4393VF belongs to the digital-to-analog converter hierarchy, where it combines a digital interface, digital filtering, a multi-bit delta-sigma modulator, and analog output stages. Its stereo architecture supports two audio channels while maintaining a 24-bit digital data path for high-resolution audio systems. The principal features include 24-bit resolution, a stereo delta-sigma conversion structure, I2S digital audio input, and operation from a 3 V to 5.25 V supply. Manufacturer material describes the device as a high-performance DAC for 96 kHz sampling applications, while distributor product information identifies a maximum sampling rate of 108 kHz for the exact AK4393VF orderable variant. These figures should be used according to the operating mode and interface configuration specified in the manufacturer datasheet. The advanced multi-bit delta-sigma architecture is central to the converter design. Instead of relying on a conventional single-bit approach, the multi-bit system is intended to provide wider dynamic range while retaining low distortion. The integrated 24-bit digital filter performs decimation and band-limiting of the incoming PCM stream, helping reduce aliasing and out-of-band noise before the signal reaches the analog output stage. Typical applications include CD and DVD audio players, DAT equipment, digital mixing consoles, home-theater audio processors, and other multichannel or stereo systems requiring a dedicated 24-bit DAC. The I2S interface simplifies connection to digital audio transceivers, receivers, and processors, while the dual analog outputs support conventional left-right signal routing. External analog filtering and output-stage design remain important because the complete audio path determines the final channel separation, noise floor, and distortion performance. When laying out the board, place the digital interface, analog output, ground-return, and decoupling connections according to the pin-description table and application circuit in the manufacturer datasheet. Analog and digital ground domains should be connected at the recommended analog reference point. Decoupling capacitors should be positioned close to their supply pins, and the analog output traces should remain short and physically separated from clock and data lines to reduce coupling into the reconstructed audio signal. This page combines manufacturer-device positioning, exact AK4393VF catalog attributes, package information, application guidance, and comparison-oriented selection criteria. It also distinguishes the verified ordering information from parameters that require confirmation in the manufacturer datasheet, helping engineers move quickly from component identification to board-level validation.
AK4393VM - 24-Bit 108kHz Stereo DAC | Asahi Kasei
Asahi Kasei AK4393VM is a 24-bit stereo audio digital-to-analog converter with a maximum sampling rate of 108 kHz, an I2S digital interface, and a 28-pin SSOP package. The device uses an advanced multi-bit delta-sigma modulator architecture to provide a wider dynamic range while retaining the low-distortion characteristics associated with high-performance audio converters. It also incorporates a 24-bit digital filter and is designed for DAT, DVD, and other professional and consumer audio systems. An audio DAC is a signal-conversion integrated circuit that reconstructs continuous analog voltages from digital audio samples. Within the signal-chain hierarchy, the AK4393VM belongs to the ADC/DAC class of data-converter ICs and supports digital audio systems, home theater, digital recording equipment, and high-fidelity playback. Its 2-channel architecture converts left and right digital streams into balanced or unbalanced analog outputs through the application circuit. Key features include 24-bit resolution, operation up to 108 kHz, stereo output, an I2S interface, an integrated 24-bit digital filter, and the advanced multi-bit delta-sigma architecture. The multi-bit approach is significant because it spreads quantization error across multiple internal bits, supporting improved dynamic-range performance without abandoning the fundamental advantages of delta-sigma conversion. The 28-SSOP package supports conventional surface-mount PCB assembly. The AK4393VM is intended for digital audio paths requiring separate left and right conversion channels and a standard serial digital interface. Its architecture is particularly relevant to source equipment operating at ordinary CD, DVD, DAT, and related high-resolution audio rates. Because the converter includes a digital filter, system designers should review the manufacturer’s timing and filter recommendations when configuring clocking, filtering, and digital signal routing. Typical applications include professional DAT equipment, DVD-audio and home-theater systems, digital mixing consoles, multichannel audio processors, sampling workstations, and high-fidelity consumer playback equipment. For designs with digital-domain processing, the AK4393VM can serve as the final stereo conversion stage after decoding, mixing, or sample-rate-conversion functions. The most important design consideration is preserving the converter’s recommended analog and digital layout. Keep the I2S clock and data routing short, use clean grounding between digital and analog sections, and follow the manufacturer’s output-filter and reference-component recommendations. Analog output impedance, load capacitance, and clock jitter can affect measured channel performance even when the digital data is valid. This product page consolidates the AK4393VM architecture, interface information, package details, application guidance, and compatible replacement information into an engineering-focused reference for audio-product designers, procurement teams, and PCB layout engineers.
AK4395VF 24-Bit 192kHz Stereo DAC | Asahi Kasei
The Asahi Kasei Microdevices AK4395VF is a high-performance stereo audio digital-to-analog converter with 24-bit resolution, operation up to a 192 kHz sampling rate, and a 28-VSOP package. Its architecture includes a 24-bit digital filter and a multibit delta-sigma modulator, while the analog and digital sections operate from a 5 V supply. The manufacturer identifies the device as a premium DAC for DVD-Audio and other high-resolution audio systems. An audio DAC is the final digital-to-analog conversion stage in a playback chain. It converts I2S-formatted digital samples into left and right analog voltages suitable for headphone or line-output amplifiers. Within the component hierarchy, the AK4395VF is an audio DAC, which belongs to the broader ADC/DAC and signal-conversion IC category used in digital audio equipment. The principal features include 24-bit data resolution, a maximum sampling frequency of 192 kHz, stereo operation, I2S digital audio input, a 5 V supply, and digital-filter stopband attenuation of at least 110 dB. The high stopband attenuation is significant because it suppresses out-of-band noise and aliasing energy that could otherwise appear near the audio baseband after digital-to-analog conversion. Internally, the AK4395VF combines a 24-bit digital filter with a multibit delta-sigma conversion architecture. The digital filter provides sharp transition characteristics for high-resolution PCM streams, while the stereo converter produces separate left- and right-channel analog outputs. This combination targets applications requiring faithful reproduction of 44.1 kHz, 48 kHz, 96 kHz, 176.4 kHz, and 192 kHz source material, subject to the interface and system clock implementation. Typical applications include high-resolution DVD-Audio players, premium CD and network-audio players, digital audio decoding boards, professional audio interfaces, and two-channel headphone or line-output stages. The 192 kHz capability is particularly relevant to studio masters and archival playback systems, while the 110 dB or greater filter attenuation helps reduce wideband aliasing noise. The 28-VSOP package requires a stable, low-noise 5 V supply and careful analog-output routing. Keep digital and analog return paths separated, use short traces around the converter, and follow the manufacturer pin-description and application-circuit tables when assigning power, ground, clock, and I2S signals. The exact pinout, output topology, and external component requirements should be taken directly from the AK4395VF datasheet. This page organizes the AK4395VF product information into a technical summary, application guidance, specification comparisons, and practical design notes. It is intended to help engineers identify the correct resolution, sampling-rate, interface, package, and supply requirements before integrating the converter into a high-resolution audio design.
AK4396VF - 24-Bit Stereo 192kHz DAC | AKM | VSOP-28
Asahi Kasei Microdevices AK4396VF is a high-performance, two-channel advanced multi-bit delta-sigma digital-to-analog converter designed for 192 kHz DVD-Audio operation. The device supports 24-bit digital audio and is supplied in a 28-pin VSOP package with a 0.65 mm pitch. Its architecture combines an advanced multi-bit delta-sigma system with a 24-bit digital filter, positioning it for high-fidelity stereo audio equipment. A digital-to-analog converter is an interface IC that converts digital audio samples into proportional analog voltages or currents. Within the signal-chain hierarchy, a DAC sits between a digital audio source and an analog output stage. The AK4396VF is a stereo DAC, meaning that one package provides two audio conversion channels for applications such as CD players, DVD-Audio systems, network-audio receivers, and premium consumer audio equipment. The headline capabilities of the AK4396VF are 24-bit resolution, operation up to a 192 kHz sampling rate, and two-channel audio conversion. The 24-bit format provides substantially more code values than conventional CD audio, while the 192 kHz capability supports high-resolution digital audio sources. The advanced multi-bit delta-sigma implementation is intended to improve conversion performance while retaining the integration advantages of a compact mixed-signal IC. The AK4396 is designed around separate analog and digital supply concepts, including dedicated reference and power-related connections. Its digital filter forms part of the signal path and requires the correct clocking and digital-audio interface configuration. The manufacturer documentation identifies the AK4396VF as a 28-pin VSOP device intended for surface-mount assembly, with an indicated operating temperature range of -40°C to +85°C. Typical uses include high-resolution CD and DVD-Audio players, digital audio amplifiers, home-theater equipment, professional monitoring electronics, and multi-channel audio systems using multiple DAC channels or devices. In each case, the device requires a clean analog supply, appropriate reference voltage, compliant input clocks, and an output-stage design matched to the DAC’s analog outputs. Designers should preserve the analog and digital grounding strategy specified by the manufacturer, place decoupling capacitors close to their associated supply pins, and treat the reference and analog-output nodes as sensitive paths. Clock source and filter configuration also determine whether the device operates in its intended audio mode. Consult the manufacturer’s pin-description and application sections before assigning tracks on a new board. This product record combines the AK4396VF device description, family comparison information, package identification, and practical design guidance in one engineering-focused reference. It also distinguishes confirmed drop-in options from related converters that require additional compatibility verification.
AK4399EQ - 32-Bit 216kHz DSD Audio DAC | Asahi Kasei
The Asahi Kasei Microdevices AK4399EQ is a high-performance 32-bit audio digital-to-analog converter rated for sampling rates up to 216 kHz, with DSD support, I2S/serial digital audio input and a 44-pin LQFP (10 x 10 mm) surface-mount package. It is specified at 123 dB dynamic range for low-distortion, wide-range playback and targets DVD-Audio-class and high-resolution networked audio sources. A DAC, or digital-to-analog converter, is the data converter that turns digital audio sample streams into a continuous analog voltage that can drive amplifiers, headphones or line inputs. Within the semiconductor hierarchy, a DAC sits under audio data converter, then data converter IC, then integrated circuit. The AK4399 belongs to the family of premium stand-alone stereo DACs rather than integrated audio codecs, which lets a designer keep the digital source and the analog output stage architecturally separate. Key features include a 32-bit internal digital filter designed for low distortion and wide dynamic range, 216 kHz maximum sample-rate operation, DSD decoding capability, serial (I2S-compatible) digital audio input, and a compact 44-LQFP surface-mount package with 0.80 mm lead pitch. The device is supplied lead-free and is a surface-mount part suited to automated assembly. Architecturally, the AK4399 separates the digital decoding stage from the analog output stage so that switching noise in the digital domain is rejected before reaching the output pins. The internal 32-bit digital filter is the element that shapes the audio band and limits aliasing, while the analog section determines the final distortion and dynamic-range floor. Because it is a discrete converter rather than a codec, it accepts digital audio from any upstream source - a network streamer, a USB interface, a Blu-ray or CD transport, or a digital mixer - without imposing that source's DAC. Typical applications include high-end network streamers, USB audio interfaces, digital preamplifiers, CD and SACD transports, USB DAC boards, hi-fi headphone output stages and professional monitoring consoles. The 123 dB dynamic-range figure suits designs where the DAC is expected to be the limiting element in the signal chain. When designing around the AK4399EQ, keep analog and digital return currents separated, provide clean regulated supplies with local decoupling close to the supply pins, and treat the analog output as a high-impedance load. Confirm the clocking scheme and master/slave relationship with the upstream digital source, since interlock and word-clock errors are the most common cause of audible noise and clicks. This page consolidates manufacturer description data, distributor availability records, a pin-compatible comparison table and practical design notes so that engineers can evaluate the AK4399EQ against premium 32-bit DAC alternatives without reconstructing the same information from multiple sources.
AK4413EQ - 120dB 24-Bit 4ch Audio DAC | Asahi Kasei
The Asahi Kasei Microdevices AK4413EQ is a high-performance four-channel audio digital-to-analog converter (DAC) delivering 120 dB dynamic range with 24-bit resolution and operation up to 216 kHz, housed in a 44-pin LQFP surface-mount package. It accepts I2S-format digital audio data and provides four independent analog output channels suitable for multi-channel consumer and professional audio equipment. An audio DAC is the final conversion stage in a digital audio signal chain, transforming I2S or other digital audio words into analog voltage signals that drive amplifiers, headphones, or line-level inputs. The DAC sits in the broader hierarchy of data-converter integrated circuits, alongside ADCs, and ultimately within the semiconductor and signal-processing domains that define modern audio playback, recording, and broadcast hardware. Key features of the AK4413EQ include its 120 dB dynamic range figure, which sets the noise floor and usable signal-to-noise ratio for the analog outputs, and 24-bit word-length handling that preserves the full depth of high-resolution source material. Four-channel output allows a single device to serve surround playback, multi-zone listening, headphone plus line-out systems, or digital mixing consoles without requiring four separate converter packages. Architecturally, the AK4413EQ combines a high-performance switched-capacitor output stage with a low-noise internal reference and digital interpolation/filtering for decimation of the incoming high-rate stream. Because it supports sampling rates up to 216 kHz, the converter handles oversampled source material used in high-resolution and mastering workflows where standard 44.1 kHz or 48 kHz rates would not suffice. Typical applications include AV receivers, USB and network audio players, digital mixing consoles, professional monitors, automotive head units, and headphone DAC/DSP platforms. For each of these, the four-channel architecture and high dynamic range reduce the number of discrete converter boards needed. One key design consideration is that the AK4413EQ requires careful analog and digital layout separation, with short, low-impedance routing from the digital interface to the DAC and a clean, star-grounded analog output section. Filter and output capacitors should be placed directly at the relevant pins to minimize added noise and distortion. This page organizes the AK4413EQ specifications, drop-in conversion alternatives, package details, and practical design guidance into a single engineering reference that supports part selection, schematic review, and sourcing decisions.