محصولات (44,000+)

TS944BID - Quad R-R Op Amp, 14-SO | STMicroelectronics
TS944BID

TS944BID - Quad R-R Op Amp, 14-SO | STMicroelectronics

The STMicroelectronics TS944BID is a four-circuit, rail-to-rail micropower operational amplifier in a 14-pin SO package. It combines four general-purpose amplifier channels with output swing that reaches the supply rails, while a related TS944BIDT ordering code is identified as a 10 kHz, 14-SO device. The 14-SO outline gives the TS944BID a compact surface-mount footprint suitable for multi-channel analog signal conditioning, instrumentation, sensor interfaces, and low-power embedded systems. An operational amplifier, or op amp, is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A rail-to-rail output amplifier can swing its output close to the positive and negative supply limits, increasing usable output range in single-supply systems. The TS944BID therefore belongs to the operational-amplifier hierarchy within analog ICs and general-purpose amplifier ICs, where four matched channels can reduce package count in designs requiring several signal paths. The principal feature of the TS944BID is its four-channel integration. Each channel provides rail-to-rail output capability, making the device applicable to buffering, gain stages, voltage comparison, and low-frequency analog conditioning. The related TS944BIDT listing identifies the family at 10 kHz gain-bandwidth product, which positions it for low-frequency signal paths rather than high-speed data acquisition. Rail-to-rail operation can also simplify interfacing with ADC inputs when the signal source occupies a large portion of the available supply range. TS944BID combines four amplifiers in one 14-SO package, reducing the number of discrete amplifier packages required for quad-channel analog circuits. Its micropower classification emphasizes low-power operation, although exact supply current, input offset voltage, noise density, and common-mode limits must be checked in the manufacturer datasheet before a production design is released. Component designers should also confirm the exact ordering-code temperature range and shipping format when placing a regulated bill of materials. Typical uses include current sensing around an instrumentation amplifier, sensor signal conditioning in industrial systems, buffered ADC inputs, low-level audio preamplification, and portable measurement equipment. Four channels are particularly useful when transducers, filters, or data-conversion inputs require consistent amplifier topology. The 14-SO package also allows the device to be placed alongside a microcontroller, analog-to-digital converter, or digital interface IC on a compact circuit board. Designers should verify the input common-mode range, output load capability, stability with the selected feedback network, and decoupling requirements against the STMicroelectronics datasheet. Place the bypass capacitor close to the supply pins and use the pin-description table when assigning PCB nets. Because TS944BID is marked obsolete, new production designs should confirm lifecycle status and consider an actively supported amplifier for new releases. This product record combines package and functional identification with lifecycle, compliance, sourcing, replacement, and application guidance. It also distinguishes the exact TS944BID ordering code from TS944BIDT and explains where engineers should verify electrical limits, mechanical details, and approved alternatives before committing a design to production.

RFQ تماس
TS944BIN - Quad Rail-to-Rail Low-Power Op Amp | STMicroelectronics
TS944BIN

TS944BIN - Quad Rail-to-Rail Low-Power Op Amp | STMicroelectronics

The STMicroelectronics TS944BIN is a four-circuit, rail-to-rail operational amplifier designed for low-voltage, low-power analog signal conditioning. It operates from 2.5 V to 10 V across a temperature range of -40°C to +85°C, and is packaged in a 14-pin DIP. Its quad configuration provides four amplifiers in one package, reducing board area and simplifying multi-channel designs. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify voltage differences between its input terminals. The TS944 belongs to the operational-amplifier hierarchy, combining rail-to-rail input and output capability with micropower operation. Rail-to-rail behavior is particularly useful when signals must be processed across most or all of the device supply range. The TS94x family combines four amplifiers with a supply current of 1.2 µA per amplifier and a maximum input offset voltage of 5000 µV. Its input bias current is specified at 0.15 nA, making it suitable for high-impedance sensor interfaces when bias-current loading must be controlled. Rail-to-rail output voltage swing supports portable, industrial-control, and low-voltage measurement systems. The TS944 is intended for general-purpose analog applications rather than high-speed signal processing. Its four independent channels can be configured as noninverting amplifiers, inverting amplifiers, voltage followers, comparators, or transimpedance amplifiers. The common quad package also simplifies power distribution and reduces the number of separate analog packages required on a board. Typical uses include battery-powered instrumentation, current-loop receivers, sensor-conditioning circuits, low-voltage audio paths, and general industrial control systems. Four matched functional channels can process several related signals in one assembly, while the low 1.2 µA supply current helps limit power consumption in portable and energy-limited equipment. Designers should verify input and output common-mode limits, output-current capability, stability with the selected load capacitance, and noise performance for the intended signal bandwidth. Input and output bypassing should follow the manufacturer's recommended application circuit, and unused amplifier channels should be configured conservatively rather than left open. This page combines device specifications, practical application guidance, commercial-request instructions, and a careful assessment of replacement options. It also distinguishes confirmed drop-in substitutes from functional alternatives that would require engineering review, helping designers avoid treating similar op amps as automatic PCB replacements.

RFQ تماس
TS944ID - 4-Channel 10kHz Micropower Op Amp | STMicroelectronics
TS944ID

TS944ID - 4-Channel 10kHz Micropower Op Amp | STMicroelectronics

STMicroelectronics TS944ID is a four-channel general-purpose operational amplifier with rail-to-rail output, a 10 kHz gain-bandwidth product, and approximately 1.2 uA supply current per amplifier. The device is packaged in a 14-pin SOIC and operates from 2.5 V to 10 V across a -40°C to +85°C temperature range. Its four amplifiers make it suitable for compact, low-power analog signal-conditioning systems requiring several amplifier stages in one package. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TS944ID belongs to the micropower operational-amplifier family within the broader linear-amplifier and signal-conditioning hierarchy. Rail-to-rail output allows the amplifier to approach its supply limits more closely than fixed-output amplifiers, improving output swing in low-voltage systems where signal headroom is limited. The principal benefits of the TS944ID are integration, low power consumption, and rail-to-rail operation. Four amplifiers in one 14-pin SOIC reduce component count and board area compared with four separate single or dual amplifier packages. The 10 kHz gain-bandwidth product is suitable for low-frequency signal conditioning, including sensor buffers, transducer amplification, and general feedback-control networks. Its approximately 1.2 uA supply current is especially useful in battery-powered instrumentation where continuous analog circuitry must consume little power. The TS944ID is designed for general-purpose analog applications rather than high-speed signal processing. Its modest 10 kHz gain-bandwidth product favors slowly changing signals, such as sensor outputs, voltage references, and control-loop error amplifiers. The 2.5 V to 10 V operating range supports low-voltage battery systems, portable instruments, industrial monitoring circuits, and embedded control platforms. The -40°C to +85°C range covers industrial and commercial environments where extended automotive qualification is not required. Typical uses include four-channel sensor acquisition, portable measurement systems, low-frequency active filters, analog signal conditioning, and embedded control interfaces. Using one quad device for similar low-frequency channels can simplify routing and reduce package count. However, all four channels share common supply pins, so they cannot use independent positive and negative supply voltages. Input common-mode and output-swing behavior should also be checked against the actual signal range. When laying out a TS944ID board, place each bypass capacitor close to the device supply pins and keep feedback components near their associated amplifier inputs and outputs. Use short, quiet input paths for sensor signals and provide adequate return paths to minimize ground coupling. Avoid using this micropower amplifier where wide bandwidth, high output-current capability, or precision offset and drift specifications are essential; a higher-bandwidth or more accurate amplifier family will usually provide a better margin. This page combines the verified TS944ID ordering information, package and electrical characteristics, application guidance, pinout, and strict same-footprint replacement analysis. It also identifies where alternative data is unavailable, helping engineers distinguish confirmed device facts from options requiring a separate qualification review.

RFQ تماس
TS944IDT - Quad Micropower R-R Op Amp | STMicroelectronics
TS944IDT

TS944IDT - Quad Micropower R-R Op Amp | STMicroelectronics

The STMicroelectronics TS944IDT is a quad micropower operational amplifier with CMOS inputs and rail-to-rail output swing, designed for four-channel signal conditioning from 2.5 V to 10 V in a 14-pin SOIC package. Its headline characteristics are a 1.2 µA supply current, 10 kHz gain-bandwidth product, and an operating temperature range from -40°C to +85°C. The four amplifiers share one package while operating from a common supply, making the TS944IDT suitable for compact, low-power instrumentation and sensor-processing systems. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two input terminals. The TS94x family belongs to the operational-amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, and general-purpose amplifiers. Rail-to-rail output capability allows the output voltage to approach the supply rails more closely than a conventional amplifier, improving output range in low-voltage systems where signal headroom is limited. The TS944IDT combines four rail-to-rail-output amplifiers, CMOS inputs, micropower consumption, and a 2.5 V to 10 V supply range. Its 10 kHz gain-bandwidth product favors low-frequency amplification rather than high-speed signal processing. The 1.2 µA operating current is particularly useful for battery-operated equipment, portable sensors, and low-duty-cycle monitoring systems where each milliamp of supply current can shorten operating time. According to the STMicroelectronics TS94x datasheet, the TS944IDT provides four amplifier circuits in a 14-pin small-outline package. CMOS input transistors support low-bias operation, while the rail-to-rail output stage increases usable output swing. The combination of four independent channels and low power consumption allows a compact design to replace several discrete single amplifiers while reducing board area and the number of required supply connections. Typical applications include low-frequency sensor conditioning, battery-powered instrumentation, portable measurement systems, industrial monitoring, and low-current feedback networks. The TS944IDT is best suited to signals whose bandwidth does not require the substantially higher gain-bandwidth product of a general-purpose precision amplifier. Designers should verify that the required closed-loop gain, output load, input common-mode range, and noise performance fit the application. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier channels should be configured according to the manufacturer datasheet rather than left without a defined operating state. This page combines the TS944IDT technical characteristics, verified sourcing information, drop-in alternatives, and application guidance to support component selection, PCB planning, and low-power analog design.

RFQ تماس
TS944IN - 4-Channel 10 kHz Rail-to-Rail Op Amp | STMicroelectronics
TS944IN

TS944IN - 4-Channel 10 kHz Rail-to-Rail Op Amp | STMicroelectronics

The STMicroelectronics TS944IN is a four-circuit, general-purpose operational amplifier with rail-to-rail output, a 10 kHz gain-bandwidth product, and a typical supply current of 1.2 uA per amplifier. It operates from 2.5 V to 10 V over a -40 C to +85 C temperature range and is packaged for through-hole mounting in a 14-DIP package. An operational amplifier, or op amp, is a high-gain analog signal-processing IC used to compare an input with a feedback-defined reference, amplify weak signals, buffer voltage sources, and implement active analog filters. Within the component hierarchy, the TS944IN is a quad operational amplifier, a type of linear amplifier and analog IC intended for low-power signal-conditioning systems. The TS944IN family emphasizes low power consumption and rail-to-rail output operation. Its 10 kHz gain-bandwidth product supports low-frequency amplification and filtering, while the 4.5 mV/us slew rate limits how quickly its output can change. Typical input bias current is 1 pA, which is useful when high-impedance sensors or sensing nodes must not be loaded heavily. The listed typical input offset voltage is 10 mV. STMicroelectronics describes the TS94x family as rail-to-rail micropower operational amplifiers for 2.5 V to 10 V operation. Four amplifiers in one package reduce board area and simplify design for systems that need several independent analog channels. The TS944IN is identified as a general-purpose amplifier and an obsolete catalog item, so lifecycle planning should account for its non-active status. Typical circuit roles include battery-powered sensor interfaces, low-frequency active filters, portable measurement systems, and general-purpose signal conditioning. Because the gain-bandwidth product is only 10 kHz, the device is better suited to slow analog signals than to high-speed waveform or video paths. Its rail-to-rail output also requires careful review of the input common-mode range for each operating condition. Design with the TS944IN using supply bypassing close to the power pins and verify each amplifier's feedback network, output load, input bias requirements, and stable operating gain. Because the input offset voltage can reach 10 mV typ. in the published summary, precision measurements may require calibration, offset correction, or a higher-accuracy amplifier. This page organizes the manufacturer specifications, lifecycle status, sourcing path, and practical application guidance for TS944IN. It also distinguishes genuine same-footprint replacements from different-package family members, helping engineers avoid substitutions that require PCB changes.

RFQ تماس
TS944IPT - Quad Rail-to-Rail 1.2µA Op-Amp | STMicroelectronics
TS944IPT

TS944IPT - Quad Rail-to-Rail 1.2µA Op-Amp | STMicroelectronics

The STMicroelectronics TS944IPT is a quad CMOS-input operational amplifier delivering rail-to-rail output swing while consuming only 1.2 µA typical quiescent current per channel, packaged in a 14-pin TSSOP (Tape & Reel). It operates from a single 2.5 V to 10 V supply over the -40 °C to +85 °C industrial temperature range and provides a gain-bandwidth product of 10 kHz, making it ideal for ultra-low-power signal conditioning. An operational amplifier (op-amp) is a high-gain DC-coupled differential amplifier that uses external feedback components to set closed-loop gain, bandwidth, and transfer function. The TS944 belongs to the micropower CMOS op-amp family — a class of linear ICs that prioritize nano- to micro-amp quiescent current draw for battery-powered and energy-harvesting designs. Within the broader semiconductor hierarchy, it sits under: op-amp -> amplifier -> analog IC -> linear IC -> integrated circuit. Key features include four independent op-amp channels in one package, CMOS inputs delivering ultra-low input bias current, rail-to-rail output swing that maximizes dynamic range on low-voltage supplies, and 1.2 µA typical supply current per amplifier that enables years of runtime from small cells. The device is unity-gain stable and supports single-supply operation from 2.5 V to 10 V, simplifying designs that previously needed bipolar ±5 V rails. The TS944 architecture uses a CMOS input stage that achieves very low bias current while the class-AB output stage swings to within millivolts of both supply rails. This combination eliminates the need for input bias-current compensation in high-impedance sensor interfaces and lets designers operate the part directly from a single lithium cell or 3.3 V digital rail without sacrificing headroom. Typical applications include battery-powered sensor signal conditioning, portable medical monitors, IoT edge nodes, active filters, transducer pre-amplifiers, and any micropower analog front end where four amplifiers must fit in a small 14-pin TSSOP footprint. Designers should bypass supplies with 100 nF ceramic capacitors placed within 5 mm of VCC and avoid capacitive loads above 1 nF without an isolation resistor to prevent oscillation.

RFQ تماس
TS951ID - 3MHz Rail-to-Rail Low-Power Op Amp | STMicroelectronics
TS951ID

TS951ID - 3MHz Rail-to-Rail Low-Power Op Amp | STMicroelectronics

STMicroelectronics TS951ID is a single-amplifier, input/output rail-to-rail BiCMOS operational amplifier optimized for 3 V and 5 V operation, with a maximum operating supply voltage of 12 V and operation from the negative rail to the positive rail at input and output. The device is packaged in an 8-pin SOIC and provides approximately 3 MHz gain-bandwidth product, 1 V/µs slew rate, and 80 dB supply-voltage rejection ratio. Its low-power design targets portable instrumentation, sensor interfaces, audio signal conditioning, and general-purpose analog systems. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs while offering high input impedance, low output impedance, and stable closed-loop behavior when feedback is applied. The TS951 belongs to the operational-amplifier hierarchy, where its BiCMOS input stage combines bipolar transistor performance with CMOS power efficiency. Rail-to-rail input and output operation extends useful signal range toward the supply rails, making the amplifier practical in low-voltage systems that cannot tolerate substantial headroom loss. Key benefits include 3 MHz gain-bandwidth product for modest-frequency signal paths, 1 V/µs slew rate for faster large-signal transitions, and 80 dB supply rejection for reducing supply ripple that could otherwise modulate the amplified signal. The low-power operating approach is useful in portable equipment where energy efficiency and reduced heat generation are priorities. ESD protection rated at 2 kV adds handling robustness, while the compact SOIC-8 package supports conventional surface-mount assembly. The BiCMOS architecture is appropriate for precision and general-purpose analog blocks where low quiescent consumption and rail-to-rail signal handling are more important than high-speed performance. Because this amplifier is intended for low-power rather than high-bandwidth signal chains, applications normally use moderate feedback resistors, explicit gain-setting resistors, and stable output-loading arrangements. Its broad supply capability also permits operation from 3 V and 5 V rails, although each operating point should be checked against the complete electrical limits in the manufacturer datasheet. Typical applications include low-voltage sensor conditioning, buffered analog measurements, portable audio paths, general-purpose instrumentation, and interface buffering around higher-impedance sensors. It can also support low-frequency control or active-filter stages where the 3 MHz gain-bandwidth product provides useful bandwidth margin. In these systems, TS951ID can reduce the loading imposed on the sensor source while maintaining an output signal referenced to the available supply range. Designers should verify input common-mode range, output swing, output-current capability, noise, and stability at the intended frequency before committing the device to a new layout. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be routed away from switching nodes and high-current return paths. The input and feedback networks must also avoid excessive source resistance or capacitance that could impair stability. This product data combines the verified STMicroelectronics family description, manufacturer datasheet, and distributor listings with practical guidance for package selection, sourcing, and analog layout. It also distinguishes electrically related family members from true drop-in choices and identifies unavailable pricing and lifecycle information rather than presenting unverified commercial figures.

RFQ تماس
TS951IDT - 3 MHz Rail-to-Rail Op Amp | STMicroelectronics
TS951IDT

TS951IDT - 3 MHz Rail-to-Rail Op Amp | STMicroelectronics

The STMicroelectronics TS951IDT is a single-circuit, rail-to-rail input/output low-power operational amplifier with a 3 MHz gain-bandwidth product, 1 V/us slew rate, and operation from 2.7 V to 12 V in an 8-pin SOIC package. Designed for instrumentation, buffer, and general-purpose signal-conditioning applications, it combines 750 uA quiescent current with rail-to-rail input and output capability. An operational amplifier, commonly called an op amp, is an active semiconductor component that amplifies the voltage difference between its two inputs. A rail-to-rail input stage accepts common-mode voltages close to either supply rail, while a rail-to-rail output stage can approach the output limits more closely than a conventional amplifier. The TS951IDT belongs to the general-purpose operational-amplifier hierarchy and is suitable for low-voltage analog systems that require useful signal range, moderate bandwidth, and low standby current. Key characteristics include a 3 MHz gain-bandwidth product, 1 V/us slew rate, approximately 750 uA quiescent current, and a 2.7 V to 12 V supply range. These attributes suit low-power sensor conditioning, buffered instrumentation, audio signal paths, and general analog signal processing. Rail-to-rail input and output operation is particularly useful when signals approach the supply limits or when the amplifier must drive loads with limited voltage headroom. The TS951IDT uses a BiCMOS operational-amplifier architecture optimized for 3 V and 5 V operation. Its moderate 3 MHz bandwidth provides adequate response for general-purpose signal conditioning without the power and cost of a high-speed amplifier. The 1 V/us slew rate supports noncritical pulse and waveform applications, while the low quiescent current helps conserve energy in portable and battery-powered equipment. Exact offset, noise, output-current, and temperature data must be confirmed in the manufacturer datasheet. Typical uses include sensor-signal conditioning, analog instrumentation, voltage buffering, audio preamplification, and low-voltage control systems. The TS951IDT can also serve as the active element in passive or active filter designs when component tolerances and loop-gain requirements permit. In portable equipment, its low quiescent current is advantageous, although input bias current and overall system demand should be evaluated before battery-life calculations. For PCB design, place input, output, and decoupling components close to the SOIC pins. Keep sensitive input traces away from switching nodes and high-current return paths, and use a ground plane that provides a low-impedance return for the amplifier. Bypass the supply pins locally with suitable ceramic capacitance and account for amplifier output loading, stability, and input common-mode limits during schematic review. This product page combines the TS951IDT electrical identity, package information, sourcing guidance, application analysis, design guidance, and verified replacement search results. It is intended to help engineers identify whether the TS951IDT matches the required bandwidth, supply voltage, package, and low-power characteristics before committing it to a design.

RFQ تماس
TS951IN - 3MHz Rail-to-Rail Op Amp | STMicroelectronics
TS951IN

TS951IN - 3MHz Rail-to-Rail Op Amp | STMicroelectronics

STMicroelectronics TS951IN is a single-circuit, general-purpose BiCMOS operational amplifier featuring a 3 MHz gain-bandwidth product, a 1 V/µs slew rate, and input/output rail-to-rail operation in an 8-DIP package. The amplifier is optimized for 3 V and 5 V operation and can also operate from a supply as high as 12 V. Its low-power design consumes approximately 0.9 mA when operated from a 3 V supply, making it suitable for portable, instrumentation, sensor, and general analog signal-conditioning systems. An operational amplifier is an active analog component that amplifies the difference between its inverting and non-inverting inputs. The TS951IN belongs to the rail-to-rail operational-amplifier category and uses a BiCMOS process that combines CMOS input characteristics with bipolar output-drive capability. Rail-to-rail input common-mode range allows the amplifier to sense signals near the positive and negative supply rails, while rail-to-rail output swing improves dynamic range when the available supply voltage is limited. Key electrical characteristics include a 3 MHz gain-bandwidth product, 1 V/µs slew rate, and approximately 0.9 mA supply current at 3 V. The 3 MHz bandwidth provides useful speed for audio-frequency buffers, general-purpose signal amplification, active filters, and sensor interfaces, while the 1 V/µs slew rate permits relatively rapid output transitions. The 8-DIP package supports straightforward through-hole assembly and is suitable for prototypes, educational platforms, and applications where a larger package is acceptable. The TS951IN is built for general-purpose precision and moderate-speed analog work. Its single-amplifier configuration simplifies designs that require one independent signal path, while the low-power operating mode can reduce total system consumption in battery-powered equipment. Because a bipolar output stage is present, careful assessment of output-current capability, capacitive-load stability, and operating temperature is appropriate before assigning it to demanding loads. Typical applications include low-frequency audio buffer stages, sensor-signal conditioning, active filters, data-acquisition front ends, portable instrumentation, and general analog signal conditioning. The rail-to-rail input capability is especially useful when sensor outputs can approach either supply rail. The rail-to-rail output stage is beneficial in low-voltage systems where a conventional amplifier would clip before approaching the available output range. When designing with the TS951IN, keep feedback routing short, place compensation and decoupling components close to the device, and verify stability with the actual source impedance and load. Connect the unused input to a defined reference potential, normally the non-inverting input or a mid-supply bias point. Do not substitute a modern CMOS or rail-to-rail amplifier without checking input offset, bias-current, noise, output-drive, and supply-current differences. This page combines manufacturer family information, distributor identification, package information, and practical design guidance with a parameter comparison against same-package family alternatives. It also distinguishes the TS951IN from the TS952 and TS954 family members, whose electrical characteristics must be checked against the manufacturer datasheet before making a board-level substitution.

RFQ تماس
TS952ID - Dual 3MHz Rail-to-Rail Op Amp | STMicroelectronics
TS952ID

TS952ID - Dual 3MHz Rail-to-Rail Op Amp | STMicroelectronics

STMicroelectronics TS952ID is a dual, input/output rail-to-rail BiCMOS operational amplifier with a 3 MHz gain-bandwidth product, 1 V/us slew rate, and operation from 2.7 V to 12 V in an 8-pin SOIC package. It is optimized and specified for both 3 V and 5 V supply rails, making it suitable for low-voltage analog systems that require an amplifier to approach its supply limits at the input and output. An operational amplifier, or op amp, is a high-gain analog building block used in amplification, buffering, filtering, sensing, and feedback-control circuits. The TS952 belongs to the rail-to-rail op-amp category within the broader amplifier IC and signal-chain hierarchy. Rail-to-rail input and output behavior allows signals near either supply rail to be processed with less conventional headroom loss than a fixed-input amplifier. The TS952ID provides two amplifier circuits, a 3 MHz bandwidth, and a 1 V/us slew rate. According to the STMicroelectronics TS952 product-page data, the device is optimized for 3 V and 5 V operation. Other identified features include an 80 dB supply-voltage rejection ratio, 2 kV ESD protection, and low-power operation. These characteristics make the part applicable to low-voltage sensor conditioning, portable instrumentation, audio input stages, and general-purpose analog signal processing. The BiCMOS architecture combines bipolar input-stage behavior with CMOS output circuitry and is intended to balance low-voltage operation, amplifier performance, and power efficiency. Because the TS952 is a dual device, two independent amplifier channels can share one package. The 8-pin SOIC outline also supports conventional surface-mount assembly, although final stability, bandwidth, and output-current behavior must be evaluated at the intended supply voltage and load. Typical uses include battery-powered sensor interfaces, buffered analog inputs, portable measurement systems, audio preamplification, and low-voltage control loops. At 3 V, the device is aligned with compact battery-operated systems; at 5 V, it provides additional signal range for industrial and consumer analog circuits. The 3 MHz bandwidth is sufficient for many general-purpose conditioning stages but is not intended for high-speed video or precision wideband instrumentation without further analysis. When designing around the TS952ID, verify input and output common-mode limits, output swing, load capability, noise, offset, and stability for the selected supply voltage. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should remain short and away from switching nodes. Feedback components should follow the manufacturer recommendations because gain-bandwidth, input capacitance, and capacitive loading can affect closed-loop behavior. This product record combines the verified STMicroelectronics family description, distributor package information, operating range, bandwidth, slew rate, rejection, and ESD information with practical selection guidance. It also distinguishes verified facts from specifications that still require confirmation from the complete manufacturer datasheet, avoiding unsupported claims about electrical limits or replacement parts.

RFQ تماس
TS952IN - Dual 3MHz Rail-to-Rail Op Amp | STMicroelectronics
TS952IN

TS952IN - Dual 3MHz Rail-to-Rail Op Amp | STMicroelectronics

The STMicroelectronics TS952IN is a dual, low-power operational amplifier with input and output rail-to-rail capability, a 3 MHz gain-bandwidth product, and a 1 V/us slew rate. It operates from 2.7 V to 12 V and is packaged in an 8-pin Mini DIP. The device belongs to the TS95x family, whose BiCMOS architecture is optimized and fully specified for 3 V and 5 V operation. An operational amplifier is a voltage-controlled differential amplifier that can amplify the difference between two input voltages while providing high open-loop gain. The TS952IN contains two independent amplifier channels in one package. Rail-to-rail input operation lets each channel accept signals close to the positive or negative supply rail, while rail-to-rail output operation allows the output voltage to approach either supply limit. These characteristics make the device useful for portable instrumentation, sensor interfaces, audio paths, and low-voltage control systems. The 3 MHz gain-bandwidth product supports useful bandwidth in low-voltage signal chains without requiring a high-speed amplifier operating from a larger supply. The 1 V/us slew rate helps limit large-signal distortion when signals change quickly. Because the TS95x family is designed for low-power operation, the TS952IN is also appropriate for battery-powered equipment where a pair of independent amplifiers is useful without using two separate packages. The device is specified for a 2.7 V to 12 V supply range, with its family optimized for 3 V and 5 V systems. At low supply voltages, rail-to-rail behavior becomes especially valuable because it increases the usable input and output range relative to conventional fixed-output amplifiers. Designers should still verify the actual output swing, input common-mode range, noise, input bias current, output-current capability, and stability requirements against the manufacturer datasheet for the operating point of interest. Typical applications include buffering sensor outputs, amplifying low-level analog signals, active filtering, audio preamplification, and general-purpose signal conditioning. In a sensor interface, one channel can amplify the sensor signal while the other can provide buffering, gain, or a reference-related function. Supply bypassing, output-load compatibility, and stability with the selected feedback network are important implementation considerations for this general-purpose dual amplifier. This product page combines the verified TS952IN operating characteristics, package information, drop-in replacement findings, application guidance, and practical design notes. It is intended to help engineers identify the correct amplifier quickly, compare pin-compatible choices, and plan PCB and signal-chain changes before releasing a new design.

RFQ تماس
TS952IPT - Dual Low-Power Rail-to-Rail Amplifier | ST
TS952IPT

TS952IPT - Dual Low-Power Rail-to-Rail Amplifier | ST

The STMicroelectronics TS952IPT is a dual, low-power operational amplifier with rail-to-rail input and rail-to-rail output capability, 35 nA input bias current, 1 V/us slew rate, 3 MHz gain-bandwidth product, and 6 mV input offset voltage in an 8-pin TSSOP package. Designed for 3 V and 5 V systems, it combines two amplifier channels in one compact surface-mount package. An operational amplifier is a high-gain analog signal-processing component that compares its differential input with a feedback-defined reference and amplifies the resulting error. The TS952IPT belongs to the rail-to-rail input/output amplifier class, allowing its input and output stages to operate close to the supply rails. This makes it useful in portable instruments, sensor interfaces, battery-powered equipment, and low-voltage industrial control systems where signal headroom is limited. Key characteristics include a low 35 nA input bias current, which reduces loading on high-impedance sources, and a 3 MHz gain-bandwidth product that supports moderate-speed signal paths. Its 1 V/us slew rate improves large-signal response, while rail-to-rail input and output stages increase usable signal range in single-supply systems. The dual configuration also reduces board area by integrating two amplifiers into one package. The TS952IPT uses a low-power BiCMOS operational-amplifier architecture. The architecture combines bipolar input behavior with CMOS-compatible output drive and low-power operation. In practical circuits, input common-mode range, output swing, output-current capability, noise, and stability with the selected feedback network determine whether it is suitable for a particular precision or signal-conditioning stage. Typical applications include low-voltage sensor amplification, photodiode-biased readout stages, portable measurement equipment, audio signal conditioning, general-purpose buffer circuits, and industrial control interfaces. The 3 V and 5 V operating environments align the device with battery-powered products, data-acquisition modules, embedded systems, and compact instrumentation. When designing a PCB around the TS952IPT, follow the manufacturer datasheet for decoupling, exposed pad or thermal guidance, input capacitance, and output-load limitations. Place the input and output bypass capacitors close to their associated pins, maintain short feedback paths, and verify stability with the actual source impedance and capacitive load. This product page combines the TS952IPT technical characteristics, sourcing information, package guidance, practical application notes, and replacement analysis. It is designed to help engineers identify the correct low-power amplifier and plan a robust implementation without changing the established 8-pin TSSOP footprint.

RFQ تماس
TS952IYD - Dual Rail-to-Rail Low-Power Op Amp | STMicroelectronics
TS952IYD

TS952IYD - Dual Rail-to-Rail Low-Power Op Amp | STMicroelectronics

The STMicroelectronics TS952IYD is a dual-amplifier operational amplifier optimized for low-power operation at 3 V and 5 V. It provides input and output rail-to-rail capability in an 8-pin SOIC package, making it suitable for portable equipment, sensor interfaces, and low-voltage signal-conditioning systems. The TS95x family combines two amplifiers per package to improve board utilization while retaining compact, surface-mount construction. An operational amplifier is an analog signal-conditioning device that uses external feedback to amplify voltage differences between its differential inputs. A rail-to-rail input stage accepts signals extending close to the positive or negative supply rail, while a rail-to-rail output stage can swing its output toward those rails. This capability is useful when signal levels occupy much of the available supply-voltage range and conventional input or output stages would otherwise introduce avoidable clipping. The TS952IYD is identified as a standard general-purpose, input/output rail-to-rail, low-power amplifier. Its two-circuit configuration supports independent signal paths within one package. The manufacturer describes the TS95x family as optimized and fully specified for 3 V and 5 V operation, giving designers a clear basis for portable and embedded applications that operate from low-voltage rails. The SOIC-8 package also supports conventional surface-mount assembly and inspection. The family's low-power orientation is significant because analog performance depends on more than nominal gain. Supply current, input bias behavior, output swing, noise, and the usable common-mode range determine whether an amplifier can process small sensor signals without consuming excessive energy or clipping near the rails. Exact electrical limits should be selected against the manufacturer's operating tables for the intended supply voltage and temperature range. Typical uses include battery-powered sensor conditioning, portable audio and communication interfaces, current measurement, low-voltage data acquisition, and embedded control systems. Two amplifiers can also implement independent gain stages, buffer functions, or active filtering when each channel requires its own feedback network. When both channels operate close to the supply rails, decoupling and grounding become especially important for preserving signal integrity. For implementation, place the bypass capacitor adjacent to the supply pins and connect the two ground pins to a low-impedance ground plane. Avoid long feedback traces and route sensitive input and output nets away from switching nodes. Confirm that the required input range, output swing, gain-bandwidth behavior, and load current remain within the manufacturer's limits at the actual supply voltage. This product page combines the TS952IYD device identity, package information, sourcing guidance, application context, and practical layout considerations. It also distinguishes directly documented characteristics from parameters that must be confirmed in the manufacturer datasheet, helping engineers plan a reliable low-voltage analog design without relying on generic operational-amplifier assumptions.

RFQ تماس
TS954ID - Quad 3MHz R-to-R Op Amp | STMicroelectronics
TS954ID

TS954ID - Quad 3MHz R-to-R Op Amp | STMicroelectronics

The STMicroelectronics TS954ID is a quad rail-to-rail BiCMOS operational amplifier optimized for 3 V and 5 V operation, with a 3 MHz gain-bandwidth product and 1 V/µs slew rate in a 14-pin SOIC package. The four amplifiers support supply voltages from 2.7 V to 12 V and combine low-power operation with low input bias current. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. A rail-to-rail output amplifier can approach the supply rails at its output, making it useful when the available signal range is small. The TS954 belongs to the amplifier IC hierarchy, where operational amplifiers are used for signal conditioning, buffering, active filtering, comparisons, and analog sensor interfaces. The TS954 family provides four amplifiers per package, a 3 MHz gain-bandwidth product, and a 1 V/µs slew rate. Its input bias current is 35 nA, while the listed supply current is 950 µA per channel. These characteristics make it suitable for general-purpose signal conditioning operating from 2.7 V to 12 V, including low-voltage analog systems and battery-powered equipment. The device uses a BiCMOS input architecture combining bipolar and CMOS process characteristics. Its rail-to-rail output stage allows useful output swing near the supply limits, while the low 35 nA input bias current reduces current errors when driving high-impedance sources. The 3 MHz bandwidth is adequate for audio-frequency and general instrumentation tasks, whereas applications requiring substantially faster closed-loop settling should use a higher-bandwidth amplifier. Typical uses include low-level sensor amplification, active analog filters, audio signal conditioning, instrumentation, and four-channel buffering. The SOIC-14 package permits conventional surface-mount assembly and provides one amplifier per two package pins. Its quad configuration can also reduce board area compared with four separate single or dual amplifier packages when all four channels are required. Designers should verify the required output swing, load impedance, input common-mode range, noise performance, and stability against the manufacturer datasheet before finalizing a circuit. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased according to the manufacturer recommendations so that input and output stages remain in their intended operating regions. This page consolidates verified manufacturer and distributor information for the TS954ID, including the 3 MHz bandwidth, 1 V/µs slew rate, 2.7 V to 12 V supply range, 14-pin SOIC format, sourcing links, and the engineering trade-offs that distinguish a low-power quad amplifier from faster or more specialized alternatives.

RFQ تماس
TS954IDT - Quad Rail-to-Rail Low-Power Op Amp | STMicroelectronics
TS954IDT

TS954IDT - Quad Rail-to-Rail Low-Power Op Amp | STMicroelectronics

The STMicroelectronics TS954IDT is a quad input/output rail-to-rail BiCMOS operational amplifier optimized for 3 V and 5 V operation, with a 2.7 V to 12 V supply-voltage range and four amplifiers in a 14-pin SOIC package. Its rail-to-rail input and output stages support operation close to the supply rails, making the device suitable for portable, industrial, and instrumentation systems that require low-voltage signal conditioning. An operational amplifier is an analog signal-conditioning semiconductor that compares two input voltages and amplifies the difference between them. A quad operational amplifier contains four independent amplifier channels in one package. The rail-to-rail BiCMOS category combines complementary bipolar input characteristics with CMOS output stages, while the low-power design targets portable and space-constrained applications. The TS954IDT provides four rail-to-rail amplifier channels, low-noise input behavior, low distortion, and operation from 2.7 V to 12 V. The manufacturer describes the family as optimized and fully specified for 3 V and 5 V systems. Rail-to-rail input operation improves usable input range, while rail-to-rail output capability allows output voltage to approach the available supply voltage more closely than a conventional non-rail-to-rail output amplifier. The TS954 family combines four general-purpose amplifiers with a 14-pin SO package. It is intended for applications where several independent analog channels are required, including sensor conditioning, buffer amplification, active filtering, low-level signal processing, and embedded control systems. The shared package consolidates four channels without requiring four separate amplifier packages, reducing board-area requirements. Typical uses include portable measurement equipment, industrial sensor interfaces, audio and communications signal conditioning, battery-powered instruments, and general-purpose analog subsystems. The 2.7 V minimum supply supports 3 V systems, while the 12 V maximum provides flexibility for 5 V and higher-voltage designs when the applied operating point remains within the device ratings. When designing around the TS954IDT, verify input and output common-mode limits, output-current demand, capacitive-load stability, and supply voltage for every channel. Decoupling capacitors should be placed close to the supply pins, and sensitive analog traces should be routed away from switching nodes and high-current return paths to preserve low-noise operation. This product page combines the manufacturer datasheet information with practical application guidance, package details, technical comparisons, and drop-in replacement options. It is intended to help engineers select the correct amplifier, plan the PCB, and assess whether a same-package alternative can simplify an existing design without unnecessary board changes.

RFQ تماس
TS954IN - 3MHz Quad Rail-to-Rail Op Amp | STMicroelectronics
TS954IN

TS954IN - 3MHz Quad Rail-to-Rail Op Amp | STMicroelectronics

The STMicroelectronics TS954IN is a quad input/output rail-to-rail low-power BiCMOS operational amplifier optimized for 3V and 5V operation. Its four amplifiers, 3 MHz gain-bandwidth product, 1 V/us slew rate, and 14-DIP package make it suitable for compact analog signal-conditioning systems requiring low-voltage supply operation. The input and output stages support rail-to-rail signal handling, while the 80 dB supply-voltage rejection specification helps suppress supply-related signal distortion. An operational amplifier is an active semiconductor device that amplifies the voltage difference between its differential inputs. Rail-to-rail input capability means the input common-mode range can extend toward both supply rails, while rail-to-rail output capability allows the output voltage to approach the operating limits more closely than a conventional non-rail-to-rail amplifier. The TS954IN belongs to the TS95x family of low-power BiCMOS operational amplifiers optimized for single-supply systems. Key characteristics include four amplifier channels in one package, a 3 MHz gain-bandwidth product, and a 1 V/us slew rate. These specifications support applications such as sensor interfaces, buffered analog signals, low-voltage instrumentation, audio paths, and general-purpose analog conditioning. The TS954IN is also identified as ESD protected to 2 kV and includes latch-up protection according to the manufacturer datasheet information. The BiCMOS architecture combines bipolar input characteristics with CMOS power-handling behavior. This implementation supports low-power operation while maintaining a useful small-signal bandwidth for sensor, filtering, and signal-buffer circuits. At a 3V supply, the family is specifically optimized for low-power consumption, which makes it relevant to portable equipment and embedded analog systems that cannot justify a higher-power precision amplifier. Typical uses include buffering sensor outputs, amplifying low-level analog signals, active filtering, level shifting, audio preamplification, and instrumentation. The quad organization reduces package count when several independent analog channels are required. Designers should still evaluate input offset voltage, input bias current, output-current capability, noise, and stability for the exact gain, load, and supply conditions before finalizing a circuit. The principal design consideration is operating margin. Rail-to-rail inputs and outputs do not remove the requirement to maintain adequate input and output voltage limits, especially under load. Decoupling capacitors should be placed close to the supply pins, and feedback networks should be designed to preserve the intended closed-loop gain while avoiding output saturation. This product page combines the manufacturer family description with practical application guidance, parameter comparison, and pin-package considerations. It is intended to help engineers determine whether the TS954IN's four-channel 3V/5V rail-to-rail architecture fits a board-level design before consulting the complete manufacturer datasheet for limit values and test conditions.

RFQ تماس
TS971ID - 12MHz Low-Noise Rail-to-Rail Op Amp | STMicroelectronics
TS971ID

TS971ID - 12MHz Low-Noise Rail-to-Rail Op Amp | STMicroelectronics

The STMicroelectronics TS971ID is a single, rail-to-rail output operational amplifier with 12 MHz gain-bandwidth product, 4 V/µs slew rate, 4 nV/√Hz input-noise density, and 0.003% ultra-low distortion. The device operates from 2.7 V to 10 V and is supplied in an 8-pin SOIC package. Its combination of low noise, high gain bandwidth, rail-to-rail output swing, and wide supply range makes it suitable for portable audio, instrumentation, sensor conditioning, and general-purpose signal-processing circuits. An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. The TS971ID belongs to the operational-amplifier hierarchy within analog and mixed-signal ICs. Rail-to-rail output means the output can swing close to either supply rail, improving usable output range in low-voltage systems. The single-amplifier configuration also keeps the package compact for cost-sensitive designs requiring one precision analog channel. The principal performance features include 12 MHz gain bandwidth and a 4 V/µs slew rate, allowing the amplifier to process relatively fast signals without excessive settling limitations. Input-noise density is specified at 4 nV/√Hz, and the listed distortion is 0.003%. According to the STMicroelectronics product family information, TS97x devices can operate with supply voltages as low as ±1.35 V and are intended for portable and battery-powered equipment. The TS971ID combines rail-to-rail output operation with low-noise and low-distortion behavior. ESD protection is listed at 2 kV, while latch-up immunity is identified as Class A. These characteristics are particularly useful when a circuit must preserve small-signal information while operating from a constrained supply. The amplifier's 2.7 V to 10 V operating range supports conventional 3.3 V, 5 V, and up-to-10 V system rails. Typical uses include microphone and line-level audio preamplification, portable measurement equipment, low-level sensor interfaces, active filters, and buffered sensor outputs. In an audio preamplifier, the 4 nV/√Hz noise density helps limit the amplifier's contribution to the system noise floor. In instrumentation, the 12 MHz bandwidth provides useful signal range, while the 0.003% distortion specification supports high-fidelity signal paths. When designing a TS971ID circuit, verify the input and output common-mode limits, operating-voltage range, output-current capability, and stability requirements against the manufacturer datasheet. Place input, output, and compensation-network components close to the device, and use a suitable output-load arrangement. Because the verified search results do not provide a public price or a complete manufacturer pin table, those details are not inferred here.

RFQ تماس
TS971IDT - 12 MHz Rail-to-Rail Low-Noise Op Amp, SOIC-8 | STMicroelectronics
TS971IDT

TS971IDT - 12 MHz Rail-to-Rail Low-Noise Op Amp, SOIC-8 | STMicroelectronics

The STMicroelectronics TS971IDT is a single rail-to-rail output, very low-noise operational amplifier with a 12 MHz gain-bandwidth product and a 4 V/us slew rate, operating from 2.7 V to 10 V in an 8-pin SOIC package. It is a standard general-purpose amplifier in the TS9xx family, built for single-supply and dual-supply analog signal chains where the output must swing close to both rails. An operational amplifier, commonly shortened to op amp, is an analog differential-input amplifier whose closed-loop behavior is set by external feedback components. Within the electronic component hierarchy an op amp sits in the analog amplifier class, alongside instrumentation and buffer amplifiers, all of which fall under the broader category of amplifier integrated circuits used for conditioning, scaling and buffering low-level signals. The TS971IDT occupies the high-speed end of that spectrum, offering enough bandwidth for video, filter and fast sensor interfaces rather than the slow precision of micropower parts. Key characteristics of this device include a single amplifier per package, rail-to-rail output operation, and a very low-noise architecture. Because the output stage swings to the positive and negative supply rails, the amplifier can drive downstream circuitry without leaving a headroom-limited region, which matters in single 3.3 V or 5 V systems where the usable signal range is already narrow. The 12 MHz gain-bandwidth product pairs with the 4 V/us slew rate so that full-scale swings are reproduced without the soft edges typical of low-bandwidth amplifiers. The TS97x family is offered in several packages to suit different board constraints. As noted in the manufacturer documentation, space-critical designs can use the SOT23-5 (2.8 x 2.9 mm) or DFN8 (3 x 3 mm) versions of the TS97x devices, while the TS971IDT itself ships in the industry-standard 8-pin SOIC outline that most assembly houses and prototype boards already support. Supply options run from 2.7 V to 10 V in total, or from 1.35 V to 5 V for single-supply operation. Typical uses include sensor signal conditioning in industrial and IoT equipment, active filtering and audio path amplification, and general-purpose buffering ahead of analog-to-digital converters. In these roles the rail-to-rail output recovers maximum signal swing from a low supply, while the wide bandwidth preserves fast transients rather than rounding them off. When laying out a design around the TS971IDT, place the bypass capacitors close to the supply pins and keep the feedback network short, since long traces add parasitic capacitance that can affect stability in high-gain configurations. Confirm that the required output swing, load current and supply noise budget match the application before fixing the gain structure in place. This page consolidates manufacturer documentation, distributor availability information, drop-in alternatives drawn from the TS9xx family, and practical design guidance that a single distributor listing does not provide on its own, giving engineers the context needed to select and land the part correctly.

RFQ تماس
TS971ILT - 12 MHz Low-Noise R-R Operational Amplifier | STMicroelectronics
TS971ILT

TS971ILT - 12 MHz Low-Noise R-R Operational Amplifier | STMicroelectronics

The STMicroelectronics TS971ILT is a single, very low-noise operational amplifier with rail-to-rail output swing, 12 MHz gain-bandwidth product, and 4 V/us slew rate, supplied in a 5-pin SOT-23 package. It operates from 2.7 V to 10 V and is intended for compact battery-powered and portable signal-conditioning circuits. An operational amplifier is an analog active component that uses high-gain feedback to amplify voltage differences. The TS971 belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, rail-to-rail input/output amplifiers, low-noise amplifiers, and precision signal-chain devices. Its rail-to-rail output allows the output voltage to approach the supply rails, improving utilization of available supply voltage in portable equipment. The TS971ILT combines low-noise operation with a 12 MHz gain-bandwidth product and 4 V/us slew rate. These characteristics make it useful for audio preamplification, sensor conditioning, active filtering, and low-level signal amplification where bandwidth and noise must be balanced. The single-amplifier configuration also reduces board area compared with dual or quad devices. The device supports supply voltages as low as 2.7 V and is characterized for operation up to 10 V. Its SOT-23-5 package is suitable for surface-mount construction, although the exposed thermal limitations of the small package require attention when driving capacitive loads or operating continuously at high output swing. The input common-mode behavior and output swing should be checked against the system supply rails in the manufacturer datasheet. Typical uses include portable audio signal paths, microphone and sensor interfaces, low-frequency filters, and general instrumentation. For battery-powered systems, the low-voltage operation can simplify power architecture and reduce the need for a higher-voltage analog rail. In signal-chain designs, the low-noise characteristics help preserve weak signals before conversion or measurement. Place input and output decoupling capacitors close to the device pins, keep analog traces short, and provide adequate return-current paths. Verify stability with the source and load impedances used in the final circuit, especially when driving long capacitive loads. This page combines manufacturer-family details, package information, pricing structure, replacement guidance, and practical design notes for faster component selection.

RFQ تماس
TS972ID - 12 MHz Dual Rail-to-Rail Low-Noise Op Amp | STMicroelectronics
TS972ID

TS972ID - 12 MHz Dual Rail-to-Rail Low-Noise Op Amp | STMicroelectronics

STMicroelectronics TS972ID is a dual, output rail-to-rail, very-low-noise operational amplifier with 12 MHz gain-bandwidth product, 4 V/us slew rate, and operation from 2.7 V to 10 V in an 8-pin SOIC package. Its principal characteristics are 4 nV/Hz noise density, 0.003% distortion, and the ability to operate with supply voltages as low as ±1.35 V. These ratings position the TS972ID as a precision amplifier for portable, battery-powered, audio-preamplifier, and low-noise signal-conditioning systems. An operational amplifier, or op amp, is a high-gain differential amplifier whose feedback network determines its closed-loop behavior. Within the integrated-circuit hierarchy, the TS972ID belongs to the operational-amplifier class, amplifier IC category, and broader analog and mixed-signal semiconductor family. Rail-to-rail output capability lets its output approach the supply rails more closely than a conventional amplifier, improving usable output swing in compact low-voltage systems. The TS972ID combines three defining benefits: 12 MHz gain-bandwidth product for moderate-frequency amplification, 4 V/us slew rate for faster signal transitions, and 4 nV/Hz input-voltage noise for low-noise operation. A 0.003% distortion figure further supports high-fidelity signal paths. The dual configuration provides two amplifiers in one 8-pin SOIC, reducing board area compared with two separate single-channel packages. Its low-voltage operating range and rail-to-rail output architecture suit systems that cannot tolerate the headroom required by conventional amplifiers. The 2.7 V to 10 V supply specification permits operation from a single 3.3 V rail, dual ±2.5 V rails, or other compatible supplies. The manufacturer description specifically identifies portable and battery-powered equipment as suitable markets, while the noise and distortion specifications make audio preamplification a natural fit. Typical uses include portable audio preamplifiers, low-noise sensor conditioning, microphone stages, active filters, and buffered sensor outputs. Two amplifiers in one package can implement dual signal channels, instrumentation front ends, or complementary gain stages when their independent inputs and outputs are required. Care is still necessary when driving capacitive loads, observing output-current limits, and controlling stability around the amplifier and feedback network. The primary design consideration is stable implementation of the intended gain. Input and feedback resistances should be selected consistently with the 12 MHz bandwidth and noise target, while board layout should minimize parasitic capacitance and feedback-loop coupling. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer guidance rather than left floating. This page consolidates the verified TS972ID operating limits, source references, and same-family alternatives with practical selection and layout guidance. It distinguishes documented facts from parameters requiring confirmation, making the result more useful for PCB compatibility reviews, sourcing, and amplifier design decisions.

RFQ تماس
TS972IN - Dual Low-Noise R2R Op Amp | STMicroelectronics
TS972IN

TS972IN - Dual Low-Noise R2R Op Amp | STMicroelectronics

STMicroelectronics TS972IN is a dual operational amplifier with rail-to-rail output swing, very low noise of 4 nV/Hz, 12 MHz gain-bandwidth product, and 4 V/us slew rate. The device operates from dual supplies as low as ±1.35 V and is packaged for through-hole assembly in an 8-DIP package with 7.62 mm pin spacing. It is designed for signal conditioning applications where low-noise amplification, low distortion, and rail-to-rail output swing are important. An operational amplifier is an analog semiconductor that amplifies the voltage difference between its two inputs while using negative feedback to establish gain and bandwidth. The TS972IN belongs to the operational-amplifier hierarchy within analog ICs and interface signal-conditioning components. Its dual-circuit configuration provides two independent amplifiers in one package, reducing board area in audio, instrumentation, sensor, and portable-equipment designs. The TS972IN combines several performance characteristics suited to precision signal chains. Its 4 nV/Hz noise density supports low-noise preamplification, while its maximum distortion of 0.003% is useful in audio and measurement paths. A 12 MHz gain-bandwidth product supports wider-band signal amplification, and the 4 V/us slew rate improves large-signal response. Rail-to-rail output swing allows the output to approach the supply rails more closely than a conventional non-rail-to-rail amplifier. The TS97x family supports operation from voltages as low as ±1.35 V, making the TS972IN suitable for battery-powered and portable systems. Its specified operating range extends to 10 V. The device also includes 2 kV ESD protection and Class A latch-up immunity, helping improve interface robustness in sensitive applications. The dual amplifier uses an 8-DIP package for conventional PCB through-hole assembly. Typical uses include audio preamplification, portable instrumentation, low-level sensor conditioning, active filtering, and general-purpose analog signal conditioning. Two amplifiers in one package are especially useful for balanced differential stages, buffer stages, or paired gain blocks where matching and board-space efficiency are beneficial. Its rail-to-rail output also makes it suitable for systems whose signal range approaches the available supply voltage. When designing a circuit, verify input and output common-mode limits, output-current demand, output swing, and stability with the selected feedback network. Place input and output decoupling close to the relevant pins, route sensitive input traces away from switching nodes, and use short ground paths to minimize parasitic feedback. The 8-DIP package is convenient for prototype and legacy through-hole assemblies but requires more board area than an equivalent surface-mount package. This product page combines the TS972IN electrical characteristics, application guidance, drop-in alternatives, and design considerations needed to evaluate the amplifier for a new analog circuit. It also highlights the trade-offs among verified same-footprint alternatives without confusing package compatibility with merely similar functionality.

RFQ تماس
TS972IPT - Dual Low-Noise Rail-to-Rail Op Amp | STMicroelectronics
TS972IPT

TS972IPT - Dual Low-Noise Rail-to-Rail Op Amp | STMicroelectronics

STMicroelectronics TS972IPT is a dual general-purpose operational amplifier with rail-to-rail output swing, 12 MHz gain-bandwidth product, 4 V/us slew rate, and operation from ±1.35 V, making it suitable for portable and battery-powered equipment. The device is packaged in an 8-pin TSSOP and is designed for instrumentation, signal conditioning, and low-voltage analog systems. Its dual-circuit configuration allows two independent amplifier channels in one package, reducing board area and simplifying power routing when both channels share the same supply voltage. The TS972 belongs to the TS97x family of low-noise operational amplifiers. An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify differences between two input voltages. The TS97x family is designed for low-voltage operation, rail-to-rail output signal swing, and portable applications where supply voltage, power consumption, and signal headroom are important design constraints. Key characteristics include a 12 MHz gain-bandwidth product, 4 V/us slew rate, dual amplifier channels, and an 8-pin TSSOP package. The rail-to-rail output stage allows the output to approach the supply rails more closely than a conventional non-rail-to-rail output stage. This is valuable in low-voltage systems where usable output range is limited and improves the effective signal range available to downstream analog and digital circuits. The TS97x family operates with voltages as low as ±1.35 V, according to STMicroelectronics product information, and the TS972IPT is identified as a 2.7 V to 10 V supply-range device in the listed technical data. The combination of low-noise operation and moderate bandwidth supports applications such as sensor interfaces, buffer stages, audio signal paths, and general-purpose analog amplification. The dual package is particularly useful when a design requires two similar channels with matching supply and ground connections. Typical uses include battery-powered instrumentation, portable measurement systems, active filtering, signal conditioning, and low-voltage sensor interfaces. The 12 MHz bandwidth provides useful speed for signals beyond static or very-low-frequency operation, while the 4 V/us slew rate helps preserve large-signal response. In designs using the rail-to-rail output, the output still requires adequate output-current capability and suitable load conditions for the selected operating point. When laying out a TS972IPT circuit, place input and output components close to their associated pins and keep sensitive input traces short and away from switching-current paths. Check the required common-mode input range, output swing, load, supply voltage, and stability conditions against the manufacturer datasheet before finalizing the application. The TSSOP package also requires careful thermal planning when both amplifier channels dissipate significant power.

RFQ تماس
TS972IQT - Dual 12MHz Low-Noise Op Amp | STMicroelectronics
TS972IQT

TS972IQT - Dual 12MHz Low-Noise Op Amp | STMicroelectronics

The STMicroelectronics TS972IQT is a dual, general-purpose operational amplifier designed for low-noise, rail-to-rail signal processing. It provides two amplifier circuits, a 12 MHz gain-bandwidth product, and operation from 2.7 V to 10 V in an 8-pin DFN package measuring 3 x 3 mm. Its rail-to-rail output supports portable, battery-powered, instrumentation, audio, and sensor-conditioning applications where the required output can approach the supply rails. An operational amplifier is a high-gain analog building block used to amplify small voltage signals, buffer sensors, perform active filtering, and provide feedback control. The TS972 belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, rail-to-rail input/output amplifiers, and low-noise instrumentation amplifiers. Its dual-channel configuration reduces the component count in stereo, differential, and multi-signal circuits while preserving matched performance within one package. The principal features of the TS972IQT include two amplifier channels, rail-to-rail output operation, low-noise performance suitable for audio preamplification, and a 12 MHz gain-bandwidth product. The 2.7 V minimum operating voltage makes it suitable for low-energy systems powered from a single lithium-cell range or a regulated 3.3 V rail. The small 8-DFN package also allows placement close to analog sensors, reducing sensitive-signal trace length and conserving board area. Its 12 MHz bandwidth is particularly useful when moderate-frequency closed-loop gain is required for audio buffers, active filters, and sensor interfaces. Low noise and low distortion characteristics make the amplifier appropriate for portable and battery-supplied equipment. Because the device is not limited to a high-voltage industrial rail, designers can use one amplifier family across 3 V, 3.3 V, and 5 V systems without changing the package footprint. Typical applications include microphone and line-level audio preamplification, low-voltage sensor conditioning, precision current-to-voltage conversion, active filters, and portable measurement equipment. Two independent channels can also implement differential buffering, dual-axis sensor interfaces, or stereo signal paths. The exposed-pad package can improve heat dissipation when either amplifier operates near its output-current limit, although normal signal operation generally produces modest dissipation. When laying out a board, place input and output decoupling close to the appropriate device pins and keep sensitive input traces away from switching nodes and high-current return paths. Verify the operating voltage, output swing, load, and stability requirements against the actual signal amplitude and frequency. The manufacturer datasheet should be used for the complete pin description, electrical limits, exposed-pad connection, and recommended layout. This product page combines the exact catalog identity, verified distributor references, application guidance, and drop-in replacement analysis for engineers evaluating the TS972IQT. It also identifies where an equivalent package and electrical match can be confirmed, helping design teams avoid assuming that a similar amplifier is electrically or mechanically interchangeable.

RFQ تماس
TS972IYD - Dual 12MHz Rail-to-Rail Op Amp | STMicroelectronics
TS972IYD

TS972IYD - Dual 12MHz Rail-to-Rail Op Amp | STMicroelectronics

The STMicroelectronics TS972IYD is a dual-circuit, general-purpose operational amplifier with rail-to-rail output swing, very low noise, and a 12 MHz gain-bandwidth product in an 8-pin SOIC package. The device supports operation from voltages as low as ±1.35 V, making it suitable for portable, battery-powered, audio, sensor, and low-voltage signal-processing equipment. An operational amplifier, or op amp, is a voltage-gain building block within analog and mixed-signal electronics. Its feedback network can create stable gain, filtering, buffering, summing, and current-control functions. The TS972IYD belongs to the operational-amplifier hierarchy, which includes rail-to-rail amplifiers, low-noise amplifiers, and low-voltage general-purpose devices used in analog signal chains. Key features of the TS972IYD include two amplifiers per package, rail-to-rail output operation, a 12 MHz gain-bandwidth product, and very low-noise characteristics. Rail-to-rail output allows the output stage to approach the supply limits, which helps maximize signal range in low-voltage systems. The dual configuration reduces board area by integrating two amplifier channels into one 8-pin SOIC package. The TS97x family operates from voltages as low as ±1.35 V and is designed for portable and battery-supplied equipment. Its combination of low-noise, low-distortion behavior, wide output swing, and moderate bandwidth supports audio preamplification, sensor conditioning, active filtering, and general analog signal processing. Engineers should account for input common-mode range, output swing, capacitive-load stability, and supply-voltage limits when selecting operating points. Typical uses include audio preamplifiers, microphone and sensor interfaces, battery-powered instrumentation, active filters, buffer stages, and low-voltage control systems. In each case, the dual channel arrangement can support paired signal paths or provide an unused amplifier for filtering, level shifting, or test functions while keeping the footprint compact. For a new layout, route the bypass capacitor directly to the supply and ground pins, keep feedback traces short, and verify stability with the intended source impedance and load. Component substitutions require confirmation of the SOIC footprint, pin functions, supply range, common-mode behavior, output swing, bandwidth, and noise performance rather than package similarity alone. This product page combines the device identity, package information, documented operating characteristics, sourcing workflow, and engineering guidance. It also distinguishes confirmed TS97x-family options from unsupported substitute claims and focuses replacement analysis on genuine pin-compatible, same-package possibilities rather than merely similar amplifier functions.

RFQ تماس