STMicroelectronics

TS971ILT - 12 MHz Low-Noise R-R Operational Amplifier | STMicroelectronics

MPN: TS971ILT ✓ فعال
2.7 V to 10 V Vdss SOT-23-5, 5 pins Package
حداقل سفارش: 1 |

TS971ILT نمای کلی

The STMicroelectronics TS971ILT is a single, very low-noise operational amplifier with rail-to-rail output swing, 12 MHz gain-bandwidth product, and 4 V/us slew rate, supplied in a 5-pin SOT-23 package. It operates from 2.7 V to 10 V and is intended for compact battery-powered and portable signal-conditioning circuits.

An operational amplifier is an analog active component that uses high-gain feedback to amplify voltage differences. The TS971 belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, rail-to-rail input/output amplifiers, low-noise amplifiers, and precision signal-chain devices. Its rail-to-rail output allows the output voltage to approach the supply rails, improving utilization of available supply voltage in portable equipment.

The TS971ILT combines low-noise operation with a 12 MHz gain-bandwidth product and 4 V/us slew rate. These characteristics make it useful for audio preamplification, sensor conditioning, active filtering, and low-level signal amplification where bandwidth and noise must be balanced. The single-amplifier configuration also reduces board area compared with dual or quad devices.

The device supports supply voltages as low as 2.7 V and is characterized for operation up to 10 V. Its SOT-23-5 package is suitable for surface-mount construction, although the exposed thermal limitations of the small package require attention when driving capacitive loads or operating continuously at high output swing. The input common-mode behavior and output swing should be checked against the system supply rails in the manufacturer datasheet.

Typical uses include portable audio signal paths, microphone and sensor interfaces, low-frequency filters, and general instrumentation. For battery-powered systems, the low-voltage operation can simplify power architecture and reduce the need for a higher-voltage analog rail. In signal-chain designs, the low-noise characteristics help preserve weak signals before conversion or measurement.

Place input and output decoupling capacitors close to the device pins, keep analog traces short, and provide adequate return-current paths. Verify stability with the source and load impedances used in the final circuit, especially when driving long capacitive loads. This page combines manufacturer-family details, package information, pricing structure, replacement guidance, and practical design notes for faster component selection.

جایگزین‌های drop-in برای TS971ILT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

TS971IYDT

✅ جایگزین مستقیم
📦 SOT-23-5
Same TS971 family and SOT-23-5 package class; suffix-specific electrical or grade details differ by .

📋 جایگزین مرجع (خارج از کاتالوگ)

TS972ILT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 SOT-23-5
Same TS97x family and SOT-23-5 footprint; the device is a different TS97x gain variant with .

📋 جایگزین مرجع (خارج از کاتالوگ)

TS973ILT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 SOT-23-5
Same TS97x family and SOT-23-5 footprint; the device is a different TS97x gain variant with .

📋 جایگزین مرجع (خارج از کاتالوگ)

TS974ILT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 SOT-23-5
Same TS97x family and SOT-23-5 footprint; the device is a different TS97x gain variant with .

📋 جایگزین مرجع (خارج از کاتالوگ)

TS975ILT

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 SOT-23-5
Same TS97x family and SOT-23-5 footprint; the device is a different TS97x gain variant with .

📋 جایگزین مرجع (خارج از کاتالوگ)

TS971ILT حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Single operational amplifier
Amplifier Count 1 amplifier
Gain-Bandwidth Product 12 MHz
Slew Rate 4 V/us
Supply Voltage Range 2.7 V to 10 V
Output Swing Rail-to-rail
Noise Characteristics Very low noise
Application Category General-purpose operational amplifier
بسته‌بندی SOT-23-5, 5 pins
نوع نصب Surface mount
Manufacturer Product Family TS97x low-noise operational-amplifier family

پیکربندی پین TS971ILT

SOT-23-5 Package Pinout Diagram SOT-23-5 5-pin surface mount IC, JEDEC MO-178. Pin 1 by dot. 1 2 3 4 5 SOT-23-5
پین 1 NC — Not connected
پین 2 IN- — Inverting input
پین 3 IN+ — Non-inverting input
پین 4 V- — Negative supply or ground
پین 5 OUT — Operational-amplifier output

کاربردهای معمول

TS971ILT مناسب است برای 6 کاربردs: Portable Audio Preamplification, Battery-Powered Sensor Conditioning, Active Low-Frequency Filters, Low-Level Analog Signal Amplification, Portable Instrumentation, Battery-Powered Analog Interface.

🎧

Portable Audio Preamplification

The TS971ILT fits portable audio preamplification because the manufacturer describes the TS97x family as very low-noise with low distortion characteristics. Its 12 MHz gain-bandwidth product and 4 V/us slew rate provide more than enough bandwidth for ordinary audio-band signals, while the 2.7 V to 10 V supply range supports 3 V and 5 V portable systems. Place the amplifier close to the source to minimize induced noise, and use stable feedback components so gain does not vary with temperature or tolerance. The rail-to-rail output helps preserve signal swing when the audio signal operates near the available supply range.

🧩

Battery-Powered Sensor Conditioning

The TS971ILT is appropriate for conditioning weak signals from battery-powered sensors because its very low-noise architecture preserves small analog signals while the low-voltage operation fits portable supply rails. The 12 MHz gain-bandwidth product allows useful loop bandwidth in active filters and instrumentation amplifiers without requiring a larger package. The 2.7 V minimum operating voltage also helps reduce the number of conversion stages in a compact sensor node. Designers should verify input common-mode limits and output swing against the sensor's signal range, and confirm stability when the sensor presents capacitive loading.

🔧

Active Low-Frequency Filters

The TS971ILT can implement active low-frequency filters in compact portable and industrial signal-processing boards. Its 12 MHz gain-bandwidth product supports gain and phase requirements well above the filter corner frequency, and the 4 V/us slew rate helps preserve low-distortion operation for moderate signal amplitudes. The SOT-23-5 footprint reduces board area compared with larger SOIC packages. Select resistor and capacitor values with appropriate tolerances, keep feedback loops compact, and check the amplifier's stability requirements with the intended source and load. The 2.7 V to 10 V range allows the same filter topology to operate across several system rails.

📡

Low-Level Analog Signal Amplification

The TS971ILT is suited to low-level analog signal amplification where a small voltage difference must be enlarged before measurement or conversion. Its very low-noise designation helps reduce contributions that could obscure weak sensor outputs, and the rail-to-rail output can improve usable signal range in a constrained supply design. The single amplifier in a 5-pin SOT-23-5 package simplifies point-of-measurement placement and reduces PCB area. For best results, use short low-impedance source paths, maintain a clean ground reference, and confirm input bias-current and offset-voltage requirements in the manufacturer datasheet before selecting resistor values.

🖥️

Portable Instrumentation

The TS971ILT can support portable instrumentation front ends because it combines a compact SOT-23-5 package, a 2.7 V to 10 V operating range, and a useful 12 MHz gain-bandwidth product. The family is positioned for very low-noise operation, making the device relevant to battery-powered meters, compact test equipment, and low-level measurement interfaces. Rail-to-rail output allows the circuit to use more of the available supply voltage than a fixed-headroom amplifier. The main engineering trade-off is package thermal and capacitive-load capability, so use short output traces, verify the load configuration, and provide stable feedback compensation where required.

🔋

Battery-Powered Analog Interface

The TS971ILT is well matched to battery-powered analog interfaces that need amplification before a converter or microcontroller samples the signal. The 2.7 V minimum supply allows operation from low-energy rails, while the very low-noise characteristic helps preserve signals close to the quantization floor of the downstream converter. The 4 V/us slew rate supports faster transient content than the minimum audio band, and rail-to-rail output improves utilization of the available voltage range. Confirm the converter's input range, sample rate, and antialiasing requirements, then place the amplifier and feedback network close to the source to minimize board-level noise pickup.

خلاصه محصولات پیشنهادی

TS971ILT STMicroelectronics استفاده‌شده در: Portable Audio Preamplification, Battery-Powered Sensor Conditioning, Active Low-Frequency Filters, Low-Level Analog Signal Amplification, Portable Instrumentation, Battery-Powered Analog Interface TS971IYDT Related TS97x family amplifier استفاده‌شده در: Portable Audio Preamplification, Battery-Powered Analog Interface TS972ILT Related TS97x family amplifier استفاده‌شده در: Battery-Powered Sensor Conditioning TS973ILT Related TS97x family amplifier استفاده‌شده در: Active Low-Frequency Filters TS974ILT Related TS97x family amplifier استفاده‌شده در: Low-Level Analog Signal Amplification TS975ILT Related TS97x family amplifier استفاده‌شده در: Portable Instrumentation
What is the operating voltage of TS971ILT?
The TS971ILT operates from 2.7 V to 10 V. According to the STMicroelectronics TS971 product information, the TS97x family was designed for voltages as low as plus or minus 1.35 V, with the TS971ILT listed for a 2.7 V to 10 V supply range. This makes it suitable for single 3 V, 5 V, and low-voltage portable systems.
What are the key specifications of TS971ILT that engineers should know?
The TS971ILT is a single low-noise operational amplifier with a 12 MHz gain-bandwidth product, 4 V/us slew rate, rail-to-rail output, and a 2.7 V to 10 V supply range. Manufacturer listings identify the TS97x family as very low-noise amplifiers with output rail-to-rail signal swing. The 5-pin SOT-23 package supports compact surface-mount designs.
Where can I download the TS971ILT datasheet PDF?
The official TS971 product page is the preferred starting point for the TS971ILT datasheet and related family information. The STMicroelectronics TS971 page is located at https://www.st.com/en/amplifiers-and-comparators/ts971.html. It identifies the TS97x family, its low-noise operation, supply-voltage capability, and rail-to-rail output behavior.
Where can I find the TS971ILT pinout?
The TS971ILT pinout is defined for the 5-pin SOT-23 package in the STMicroelectronics TS971 datasheet. The package contains the operational-amplifier input pins, output, and power connections. Use the manufacturer pin-description table when assigning PCB tracks, because package drawings can vary in orientation and exposed thermal details.
Is TS971ILT suitable for audio preamplification?
Yes, the TS971ILT is suitable for audio preamplification because it is specifically described as a very low-noise single operational amplifier with low distortion characteristics. Its 12 MHz gain-bandwidth product and 4 V/us slew rate provide useful bandwidth beyond the audio band, while the 2.7 V minimum supply supports portable and battery-supplied equipment.
What is the difference between TS971ILT and TS971IYDT?
TS971ILT and TS971IYDT are closely related TS97x-family devices, and the available comparison listing indicates that they differ in ordering or grade-related details. Both are presented in the same SOT-23-5 package family for the TS971ILT and TS971IYDT comparison. Verify the exact suffix, temperature grade, and manufacturer ordering information before treating one as a direct replacement.
TS971ILT vs TS971LT - which is better for a portable design?
Choose TS971ILT for a compact portable design when the 5-pin SOT-23-5 footprint is required. TS971LT is shown in comparison listings as a related TS971-family device, but the comparison information does not establish that it has the same package or identical electrical ratings. Confirm the package drawing and pin assignment in the manufacturer datasheet before making a substitution.
When should I choose TS971ILT over a lower-noise amplifier?
Choose TS971ILT when a compact, low-noise amplifier with 12 MHz gain-bandwidth product and 4 V/us slew rate is needed in a 2.7 V to 10 V system. A lower-noise amplifier may be preferable for precision instrumentation or high-resolution conversion when its noise specification is required. The TS971ILT is best selected when its combination of noise, bandwidth, size, and supply range matches the signal chain.
What can replace TS971ILT?
The closest listed replacement candidates are the related TS97x-family devices, especially TS971IYDT and other TS971 variants identified in the family comparison results. A replacement must match the SOT-23-5 footprint, pin assignment, supply range, gain configuration, input/output characteristics, and required temperature grade. Do not rely on family similarity alone for production use.
Can TS971ILT replace TS971ID?
The available comparison data does not prove that TS971ILT is a drop-in replacement for TS971ID because the package and suffix details differ between the listed devices. TS971ILT is identified as SOT-23-5, while the comparison listing identifies TS971ID as a related device without confirming the same footprint. Check the manufacturer pin drawings and electrical tables before replacing TS971ID.
Where to buy TS971ILT online?
Use the Request a Quote form on this page to request TS971ILT availability, pricing, and lead time from XAIPART. The manufacturer and distributor listings confirm TS971ILT availability information, but current commercial terms should be confirmed at the time of quotation. The part is identified as a STMicroelectronics 5-pin SOT-23-5 operational amplifier.
What is the price of TS971ILT?
The current price of TS971ILT should be requested through the Request a Quote form on this page. Pricing can vary with order quantity, package suffix, and supply conditions, so a quotation provides the most appropriate commercial response. The part is listed as a standard general-purpose, single, rail-to-rail-output operational amplifier in SOT-23-5.
What is the lead time for TS971ILT?
Current lead time for TS971ILT should be confirmed through the Request a Quote form on this page. The available manufacturer and distributor listings confirm the device and its SOT-23-5 configuration, but they do not provide a stable current lead-time commitment. Submit the required quantity and packaging details with the quotation request.
Is TS971ILT in stock?
TS971ILT is shown as an available catalog part in the current distributor search results, including a DigiKey listing and a Mouser listing. For a confirmed stock position, use the Request a Quote form on this page and specify the quantity and packaging required. Inventory can change between searches.
What is the best STMicroelectronics equivalent for TS971ILT?
TS971IYDT is the closest listed STMicroelectronics alternative because it is explicitly compared with TS971ILT and belongs to the same TS97x family. The comparison does not by itself establish every electrical and qualification detail, so verify the exact suffix, package, pinout, supply range, and temperature grade before using it as a drop-in substitute.
What is the best Analog Devices equivalent for TS971ILT?
No Analog Devices drop-in equivalent for TS971ILT is identified in the available cross-reference information. The search results primarily identify STMicroelectronics TS97x-family devices and general cross-reference tools, not a verified cross-brand part with a confirmed SOT-23-5 pinout and matching electrical specifications. Any cross-brand substitution should be treated as a new design review until its documentation confirms compatibility.

داده‌های مرجع مهندسی برای TS971ILT — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose TS971ILT for compact, low-noise signal amplification in 2.7 V to 10 V systems where a 5-pin SOT-23-5 footprint, 12 MHz gain-bandwidth product, 4 V/us slew rate, and rail-to-rail output are useful. Select TS971IYDT when its exact suffix and qualification details match the target design better, while confirming that its pinout and electrical limits are unchanged. The TS972ILT through TS975ILT choices are appropriate only when the required gain configuration matches the application and their exact datasheet specifications have been reviewed. For a design requiring a dual or quad amplifier, different package size, higher precision, lower noise, wider supply range, or automotive qualification, do not treat a single TS97x-family device as an automatic substitute; review the complete electrical specification and footprint instead.

مقایسه با جایگزین‌ها

پارامتر این محصول TS971IYDT TS972ILT TS973ILT TS974ILT TS975ILT
Package SOT-23-5 SOT-23-5 SOT-23-5 SOT-23-5 SOT-23-5 SOT-23-5
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Product Type Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier
Supply Voltage Range 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V
Primary Application Portable and battery-supplied equipment Portable and battery-supplied equipment TS97x general-purpose amplification TS97x general-purpose amplification TS97x general-purpose amplification TS97x general-purpose amplification

تفاوت‌های کلیدی

  • Low-voltage rail-to-rail operation (در مقابلTS971IYDT)
  • Compact signal-path footprint (در مقابلTS972ILT)
  • Portable-system voltage compatibility (در مقابلTS973ILT)

یادداشت‌های طراحی

The TS971ILT operates from 2.7 V to 10 V, so check the complete signal range against the supply rails before designing the feedback network. Keep the input bypass capacitor physically close to the supply pin and use a short, low-impedance ground return. Because rail-to-rail output can approach the supply limits, leave additional margin for load-dependent swing, distortion, and output-current limits.

Place the amplifier, feedback resistors, and compensation components as close together as practical. Route the inverting input directly to the feedback node to minimize parasitic capacitance, and avoid routing high-current or digital-clock traces beneath the analog input. The small SOT-23-5 package benefits from careful ground-plane continuity because long return paths can increase noise pickup and reduce signal margin.

Do not assume that every TS97x suffix is electrically interchangeable. Confirm the exact gain configuration, supply range, input common-mode limits, offset voltage, bias current, and temperature grade in the manufacturer datasheet. If the output drives a capacitive load, begin with a small test load and verify stability with an oscilloscope; the small SOT-23-5 package also limits continuous dissipation.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product listings identify the TS971 family and package but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ts971ilt pfas TS971ILT datasheet TS971ILT pinout TS971ILT datasheet pdf TS971ILT equivalent TS971ILT replacement TS971ILT cross reference TS971ILT footprint TS971ILT spice model STMicroelectronics TS971ILT TS971ILT price TS971ILT stock TS971ILT vs TS971IYDT TS971ILT SOT-23-5 TS971ILT application circuit

قطعات و اصطلاحات مرتبط

STMicroelectronics TS971ILT TS971IYDT TS972ILT TS973ILT TS974ILT TS975ILT operational amplifier low-noise amplifier rail-to-rail output amplifier analog signal conditioning active filter audio preamplifier sensor interface SOT-23-5 surface-mount package battery-powered equipment gain-bandwidth product slew rate supply voltage RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ