محصولات (44,000+)

XMC4108-Q48K64AB - 80MHz Cortex-M4 64KB MCU | Infineon
XMC4108-Q48K64AB

XMC4108-Q48K64AB - 80MHz Cortex-M4 64KB MCU | Infineon

The Infineon XMC4108-Q48K64AB is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 64 KB of embedded flash, 20 KB of SRAM, and a 48-pin VQFN exposed-pad package measuring 7 mm by 7 mm. Its industrial temperature rating spans -40°C to +125°C, while its stated operating voltage range is 3.13 V to 3.63 V. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals within one semiconductor device. In the product hierarchy, the XMC4108 is an ARM Cortex-M4 MCU, a 32-bit embedded microcontroller within the broader semiconductor category. Its combination of deterministic control capability, flash memory, SRAM, serial interfaces, and analog peripherals supports compact industrial control designs. The verified device data identifies the XMC4000 family, ARM Cortex-M4 architecture, 80 MHz operating frequency, 64 KB flash, 20 KB SRAM, 32-bit processing, and eight-channel DMA capability. Its VQFN-48-EP package supports dense surface-mount placement, while the exposed pad provides a thermal connection to the PCB. The industrial temperature range permits deployment across extended-temperature environments when all electrical and soldering requirements are satisfied. The part is positioned for embedded motor and industrial automation control, connected sensor systems, and compact embedded platforms. At 80 MHz, the Cortex-M4 core provides substantially more instruction throughput than basic 8-bit or 16-bit control architectures, while 20 KB of SRAM supports working memory, buffers, and real-time control state. The 64 KB flash capacity accommodates boot code, application firmware, configuration data, and field-update logic within one device. The listed 3.3 V operating range makes supply design straightforward, but the narrow 3.13 V to 3.63 V limit requires a regulated rail with adequate tolerance, sequencing, and decoupling. Decoupling capacitors should be placed close to supply and ground pins. Firmware must also observe the device’s documented clock, reset, peripheral, and pin constraints; detailed features not present in the supplied verification data should be checked against the manufacturer documentation before release. This page combines verified manufacturer and distributor information with package, sourcing, application, and design guidance. Pricing is shown as of 2026-10-23 where exact quantity pricing is available, while unverified electrical, pin-level, and lifecycle details are explicitly identified rather than inferred.

RFQ تماس
XMC4108-Q48K64BA 80MHz Cortex-M4 64KB MCU | Infineon
XMC4108-Q48K64BA

XMC4108-Q48K64BA 80MHz Cortex-M4 64KB MCU | Infineon

The Infineon XMC4108-Q48K64BA is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 80 MHz, with 64 KB of embedded flash and 20 KB of SRAM. It is supplied in a PG-VQFN-48 package and is specified for an industrial ambient temperature range of -40°C to 125°C. These headline resources and environmental ratings position the device for compact embedded-control systems requiring deterministic real-time performance and broad temperature support. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one device. The XMC4000 family belongs to the hierarchy of 32-bit MCU, embedded processor, controller, and semiconductor. Infineon describes the XMC4108-Q48K64 BA as an industrial ARM Cortex-M4 MCU, making it suitable for embedded control applications where a compact microcontroller must execute application code and manage external inputs, outputs, and communications. The device combines 64 KB of flash for nonvolatile program storage with 20 KB of SRAM for working memory. Its Cortex-M4 core operates at 80 MHz, providing the computational throughput required by embedded-control workloads while retaining the simplicity of a single-chip implementation. The supplied data also identifies the family as an industrial MCU, while the -40°C to 125°C range supports deployments across extended commercial and industrial temperature environments. The Q48 ordering option indicates a 48-pin VQFN package, and the DigiKey listing for the closely related XMC4108Q48K64ABXUMA1 identifies the package as PG-VQFN-48-4. The manufacturer and distributor records also associate the XMC4108 family with the XMC4000 industrial-microcontroller family. Exact peripheral inventories, pin functions, electrical limits, clock architecture, and memory-map details should be confirmed in the Infineon datasheet before schematic or firmware sign-off. Typical uses include industrial automation controllers, sensor and actuator interface modules, motor-control support systems, building-automation equipment, and embedded communications controllers. In these applications, the 80 MHz Cortex-M4 core can execute control logic while the 64 KB flash stores firmware and the 20 KB SRAM supports working state. The -40°C to 125°C specification makes the MCU particularly relevant where ambient temperatures exceed typical consumer-electronics limits. Design planning should focus on exact pin allocation, supported I/O functions, decoupling, clock configuration, and the selected package footprint. Because the verified excerpts do not provide a complete pin table, the public pinout cannot be reproduced reliably from the supplied data; engineers should therefore use the manufacturer documentation for land pattern, exposed-pad connection, and peripheral multiplexing. This page combines verified manufacturer and distributor data with a transparent selection guide, application guidance, design notes, and same-package alternatives. It distinguishes confirmed XMC4108-Q48K64BA attributes from fields that still require datasheet-level verification, helping engineers narrow the part without treating incomplete search snippets as full specifications.

RFQ تماس
XMC4108F64K64ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4108F64K64ABXQMA1

XMC4108F64K64ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4108F64K64ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 80 MHz with 64 KB of flash memory and 20 KB of SRAM. The device is offered in a PG-LQFP-64-19 package and includes eight DMA channels, an MPU, and interfaces including CAN bus, I2C, LIN bus, SPI, UART/USART, and USB. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ARM Cortex-M4 architecture places this MCU in the embedded processor hierarchy, where deterministic real-time control, communications, and general-purpose I/O can be handled by a compact, low-power system-on-chip. The XMC name denotes Infineon's industrial microcontroller family, designed for embedded control applications requiring deterministic peripheral handling and a broad communications feature set. Verified device characteristics include an 80 MHz Cortex-M4 core, 32-bit processing, 64 KB program flash, 20 KB SRAM, eight-channel DMA, and an MPU. The listed connectivity options cover CAN bus, I2C, LIN bus, SPI, UART/USART, and USB. These resources support distributed control nodes, industrial communication gateways, motor-control peripherals, and connected embedded equipment without requiring several discrete interface components. The XMC4108F64K64ABXQMA1 uses an industrial Arm Cortex-M4 platform with dedicated hardware features intended to reduce processor involvement in data movement and time-critical I/O. Its eight-channel DMA controller can transfer data between SRAM and peripherals, while the MPU supports memory isolation for software protection. The 1.3 V and 3.3 V operating options shown in distributor data should be verified against the complete manufacturer datasheet before power-supply and I/O-level design begins. Typical uses include industrial automation modules, CAN or LIN-connected controllers, USB-to-serial equipment, data acquisition nodes, and compact embedded platforms requiring a 64-pin microcontroller. For these applications, the combination of 80 MHz processing, 64 KB flash, 20 KB SRAM, and the listed serial interfaces provides a balanced platform for control logic, protocol handling, and supervisory firmware. PCB planning should account for the PG-LQFP-64-19 footprint, exposed-pad requirements, power and ground distribution, and the manufacturer's recommended decoupling. Because the supplied search data does not include the complete pin table or electrical limits, designers should confirm pinout, absolute maximum ratings, clock requirements, and peripheral multiplexing against the manufacturer documentation before release. This product page consolidates verified distributor specifications, manufacturer information, sourcing details, and practical design guidance. It also distinguishes the documented base XMC4108-F64K64-BA device from the exact orderable XMC4108F64K64ABXQMA1 designation, helping engineers verify package, qualification, and sourcing requirements before committing a design to the PCB.

RFQ تماس
XMC4108F64K64BAXQMA1 - 80MHz ARM Cortex-M4 MCU | Infineon
XMC4108F64K64BAXQMA1

XMC4108F64K64BAXQMA1 - 80MHz ARM Cortex-M4 MCU | Infineon

Infineon Technologies XMC4108F64K64BAXQMA1 is an ARM Cortex-M4 32-bit microcontroller in the XMC4000 industrial microcontroller family. The verified product information identifies a 80 MHz operating frequency, 64 KB (64K x 8) flash memory, and a PG-LQFP-64-19 package. It is positioned for embedded control applications requiring an ARM Cortex-M4 core and integrated microcontroller resources in a 64-lead LQFP package. The component is identified as an industrial microcontroller by Infineon's product page. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral functions into one embedded-system component. In the product hierarchy, this part is an ARM Cortex-M4 microcontroller, an XMC4000-family device, an industrial microcontroller, and ultimately an embedded semiconductor. The Cortex-M4 core uses a 32-bit architecture, making the XMC4108F64K64BAXQMA1 suitable for control logic, industrial automation, sensor monitoring, motor-control support, and connected embedded equipment where a deterministic microcontroller platform is required. The principal verified characteristics are the 80 MHz CPU frequency, 64 KB flash, and 64-lead PG-LQFP-19 package. The related Infineon XMC4108 family information also identifies 20 KB SRAM for the XMC4108-F64K64-BA device. These figures should be checked against the exact ordering code and package-specific datasheet before final design release. No operating-voltage range, GPIO count, peripheral inventory, temperature range, or automotive qualification status was supplied in the verified source data and therefore should not be inferred here. Typical design uses include industrial controller boards, factory automation modules, building and environmental monitoring systems, communication gateways, and compact embedded control products. In these systems, the 80 MHz Cortex-M4 core provides computational headroom for control algorithms, while 64 KB flash stores firmware and configuration data. The LQFP package is also useful for prototypes, automated assembly, and designs requiring accessible leads during inspection or rework. Designers should confirm the exact pin multiplexing, peripheral availability, power requirements, clock configuration, and exposed-pad connection requirements from the Infineon datasheet before layout release. The LQFP footprint is sensitive to thermal and EMC performance, so a solid ground-plane strategy, short return paths, and decoupled supply rails remain important. This page combines verified distributor and manufacturer information with application guidance, pricing-status notes, and explicitly marked data gaps for engineering review.

RFQ تماس
XMC4108Q48K64ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4108Q48K64ABXUMA1

XMC4108Q48K64ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4108Q48K64ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at up to 80 MHz with 64 KB of Flash memory, 20 KB of SRAM, an MPU, and an eight-channel DMA controller. The device is supplied in a 48-pin PG-VQFN-4 package with an exposed pad, and the verified industrial ordering variant supports an operating temperature range of -40°C to +125°C. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor within the microcontroller hierarchy, combining a reduced-instruction-set processor core, memory, interrupt handling, and programmable peripherals on one integrated circuit. The XMC4000 family is positioned for industrial embedded systems where deterministic control, moderate flash capacity, SRAM, DMA-assisted data movement, and memory protection are useful without requiring a larger high-density MCU. The XMC4108Q48K64ABXUMA1 provides a 64 KB (64K x 8) Flash program-memory configuration, 20 KB of SRAM, and an operating frequency of 80 MHz. Its MPU supports controlled memory access for embedded applications, while the eight-channel DMA controller can transfer data between memory and peripherals with reduced processor intervention. The verified supply voltage options are 1.3 V and 3.3 V, providing flexibility for low-voltage cores and 3.3 V peripheral rails when the board design supports the device requirements. The package is identified as PG-VQFN-48-4 in distributor data, with 48 no-lead terminals and a square package shape. Infineon package code HVQCCN is also listed in the verified distributor record. Because the supplied sources identify the package and terminal count but do not provide a complete numbered pin map, the exposed-pad connection, or every alternate function, a complete pinout cannot be reproduced safely from the available evidence. Typical uses include industrial sensor and actuator controllers, compact motor-control or condition-monitoring systems, embedded data-acquisition nodes, and industrial communications equipment. The 80 MHz Cortex-M4 core handles control logic, the DMA controller assists with data movement, and the MPU can provide isolation between software domains. Exact peripheral assignments, timer resources, and analog functions should be confirmed against the complete manufacturer datasheet before schematic capture. For a new PCB, preserve the 48-pin land pattern, exposed-pad geometry, and manufacturer-recommended thermal-via arrangement. Decoupling, startup behavior, clock configuration, and programming should follow the datasheet rather than assumptions based on generic Cortex-M4 designs. Because the verified data does not include detailed pin definitions or electrical limits, those values must be checked before release to production. This product page consolidates the verified manufacturer and distributor information into an engineer-focused record covering architecture, memory, temperature range, package identity, ordering variants, and sourcing limitations. It also distinguishes verified drop-in candidates from broader functional comparisons, avoiding an unsupported claim that a different microcontroller is pin-compatible without manufacturer documentation.

RFQ تماس
XMC4108Q48K64BAXUMA1 - 80MHz Cortex-M4 64KB MCU | Infineon
XMC4108Q48K64BAXUMA1

XMC4108Q48K64BAXUMA1 - 80MHz Cortex-M4 64KB MCU | Infineon

The Infineon Technologies XMC4108Q48K64BAXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 industrial MCU family, operating at 80 MHz with 64 KB of embedded flash and 20 KB of SRAM in a 48-pin PG-VQFN package. It is designed for embedded industrial control systems requiring deterministic real-time performance, compact packaging, and integrated microcontroller resources. The verified distributor listing identifies the device as a 32-bit XMC4000-series MCU with 64 KB flash, an 80 MHz Cortex-M4 core, and a 3.3 V supply. The XMC4000 family belongs to the industrial microcontroller hierarchy: MCU, embedded microcontroller, 32-bit microcontroller, Arm Cortex-M4 microcontroller, and industrial control processor. Compared with general-purpose entry microcontrollers, the XMC4108 family is oriented toward connected industrial equipment, sensors, actuators, communication modules, and control platforms where predictable execution and a compact surface-mount footprint are important. Key verified features include an Arm Cortex-M4 processor core operating at 80 MHz, 64 KB of flash memory organized as 64K x 8, and 20 KB of SRAM. The official Infineon product-page snippet specifies an industrial temperature range of -40 °C to 125 °C. The device is supplied in a 48-pin PG-VQFN package with an exposed pad according to distributor data, making it suitable for compact PCB designs requiring high-density placement and improved thermal spreading. The XMC4108Q48K64BAXUMA1 is appropriate for industrial automation, motor and motion control, communications equipment, building automation, sensor hubs, and embedded control systems. Its 80 MHz Cortex-M4 performance supports interrupt-driven control, digital signal processing, and communication protocol handling while retaining a unified memory architecture and low component count. The 64 KB flash capacity is suitable for firmware, configuration data, and application code, while the 20 KB SRAM supports working memory, stack, buffers, and peripheral data structures. Designers should verify the exact pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and peripheral mix against the manufacturer datasheet before layout release. The verified data confirms the core, memory size, frequency, package family, supply indication, and industrial temperature range, but it does not provide a complete electrical table or detailed pinout. This product page therefore distinguishes verified attributes from parameters requiring confirmation from the XMC4100/4200 series documentation.

RFQ تماس
XMC4200F64F256ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200F64F256ABXQMA1

XMC4200F64F256ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4200F64F256ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 series, operating at up to 80 MHz with 256 KB of flash memory, 40 KB of SRAM, and a 64-lead LQFP package with exposed pad. It operates from a 1.3 V to 3.3 V supply, making it appropriate for embedded industrial-control, communications, and real-time automation systems. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces on one integrated circuit. The ARM Cortex-M4 core places the XMC4200 within the hierarchy of 32-bit embedded processors, microcontrollers, and programmable control devices. Its architecture supports efficient event-driven control while providing enough memory for moderate protocol stacks, control logic, and application firmware. The headline features of the XMC4200F64F256ABXQMA1 are its 80 MHz maximum operating frequency, 256 KB flash memory, and 40 KB SRAM. The 256 KB flash provides nonvolatile storage for firmware and constants, while the 40 KB SRAM supports stack space, working buffers, and real-time data processing. A 1.3 V to 3.3 V operating range accommodates low-voltage digital systems, and the 64-pin LQFP exposed-pad package provides a practical surface-mount option for industrial controller designs. The XMC4000 architecture is centered on the ARM Cortex-M4 processor and combines embedded control performance with digital peripherals. Operating at up to 80 MHz gives the core additional processing headroom for communications, data acquisition, and supervisory functions. Flash and SRAM capacities should be checked against firmware size, interrupt requirements, and buffering needs before finalizing a design, particularly when an RTOS or multiple communication protocols are planned. Typical uses include industrial automation controllers, sensor-acquisition systems, motor-control supervisory equipment, building-control interfaces, and connected embedded products. The microcontroller is especially appropriate when a compact 32-bit control platform is needed without moving to a higher-pin-count package. Its 40 KB SRAM is useful for buffered measurements and communication tasks, while 256 KB flash can hold a substantial embedded application. Designers should use the manufacturer datasheet pin description and exposed-pad connection requirements when laying out the PCB. Place decoupling capacitors close to the supply pins, provide clean grounding around the exposed pad, and program unused pins according to the device recommendations. Confirm startup, clock, reset, and peripheral configurations in the manufacturer reference documentation before production release. This product page combines the manufacturer’s XMC4200 family specifications with package, memory, and ordering information, then adds practical selection guidance for industrial embedded designs. It also identifies the limitations of drop-in replacement options so engineers can distinguish exact ordering variants from devices that merely appear similar in headline specifications.

RFQ تماس
XMC4200F64F256BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200F64F256BAXQMA1

XMC4200F64F256BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4200F64F256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with an operating frequency of up to 80 MHz, 256 KB of flash memory, and 40 KB of SRAM in a 64-pin LQFP package with an exposed pad. It belongs to the XMC4000 family and combines deterministic embedded processing with industrial-oriented integration. The device operates from a 3.3 V supply according to the available distributor specifications. An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Within the product hierarchy, a microcontroller integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, interrupt control, and communication interfaces on one semiconductor device. The XMC4200 therefore serves as a complete embedded platform rather than a standalone processor, making it suitable for industrial equipment, sensors, actuator controllers, and connected automation systems. The principal verified specifications include an 80 MHz maximum clock, 256 KB flash organized as 256K x 8, and 40 KB SRAM. The program-memory capacity is suitable for moderate embedded applications, while the SRAM supports working state, data acquisition, communication buffers, and peripheral control. Availability through DigiKey and Mouser indicates that the exact ordering code is commercially obtainable, although distributor stock remains subject to change. Technical differentiation within the XMC4000 family is determined by the selected die and ordering designation. The manufacturer identifies the XMC4200-F64F256-BA as an industrial ARM Cortex-M4 microcontroller with 256 KB flash, 40 KB SRAM, and operation up to 80 MHz. The AXQMA1 ordering suffix further distinguishes the supplied package and delivery configuration from other XMC4200 variants. Firmware developers should therefore treat the ordering code, not only the abbreviated XMC4200 family name, as the controlling device identity during PCB and BOM qualification. Typical uses include distributed industrial control, machine-control modules, sensor and actuator interfaces, communications equipment, and embedded automation nodes. An 80 MHz Cortex-M4 core can execute control logic concurrently with interrupt-driven peripheral service, while 256 KB of flash supports application firmware and 40 KB of SRAM can accommodate protocol stacks and runtime data. Exact peripheral availability, pin multiplexing, and electrical limits must be confirmed in the manufacturer data sheet before assigning signals to the 64-pin package. PCB design should preserve the exposed-pad land pattern specified for the LQFP-64 package, connect the exposed pad to the appropriate ground plane, and route high-speed or sensitive signals away from noisy switching nodes. Firmware bring-up should include appropriate clock, reset, and peripheral initialization procedures from the data sheet. Because the supplied search extracts do not provide the complete pin table, pin names, absolute maximum ratings, or detailed timing characteristics, those values should not be inferred from the family name. This product record combines manufacturer and distributor information, package and memory details, commercially sourced ordering information, and an explicit assessment of drop-in alternatives. It also distinguishes verified pin-compatible same-brand options from broader functional equivalents that cannot replace this device without PCB redesign, firmware adaptation, and qualification.

RFQ تماس
XMC4200F64K256ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200F64K256ABXQSA1

XMC4200F64K256ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4200F64K256ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 256 KB of flash memory and 40 KB of SRAM in a 64-pin PG-LQFP-64 package. The device belongs to the XMC4000 family and targets industrial embedded-control applications requiring deterministic real-time performance, structured connectivity, and a compact 64-pin footprint. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. The XMC4200 combines an ARM Cortex-M4 processor with embedded Flash and SRAM, forming a complete embedded-processing platform within the hierarchy of MCU, 32-bit microcontroller, embedded controller, and industrial semiconductor. Its on-chip memory allows firmware, configuration data, and real-time control routines to operate without external memory in many designs. The principal device characteristics include an 80 MHz Cortex-M4 core, 256 KB program Flash, and 40 KB SRAM. The 64-pin LQFP package also provides an exposed pad according to the component listing, improving heat transfer from the microcontroller to the PCB. Operation from a 1.3 V or 3.3 V supply is identified in the product listing, allowing the device to support both lower-voltage core operation and conventional 3.3 V industrial interfaces. The ARM Cortex-M4 architecture uses a 32-bit instruction set and supports efficient interrupt-driven control, which is useful when deterministic response and low-latency peripheral handling are required. The XMC4000 family is designed for industrial applications, where a microcontroller must combine general-purpose processing with communication and control peripherals. Its industrial positioning makes it applicable to equipment controllers, embedded automation nodes, and connected industrial sensing systems. Typical applications include industrial motor and motion control, industrial communication gateways, programmable automation controllers, embedded measurement systems, and compact control equipment. For these uses, the 256 KB Flash capacity provides useful code and configuration space, while the 40 KB SRAM supports working memory, buffers, stacks, and real-time data processing without immediately requiring external memory. PCB design should account for the exposed-pad thermal path and the device's 64-pin perimeter footprint. The exposed pad must be connected to the appropriate supply and ground planes according to the manufacturer pin-description table, while supply decoupling should be placed close to the power pins. Firmware integration also requires assigning the correct peripheral pins, clocks, and interrupt sources for the intended industrial control function. This product record combines the exact ordering identity, core and memory specifications, package information, sourcing guidance, comparison data, and practical integration notes. These engineering details help designers determine whether the XMC4200F64K256ABXQSA1 fits an existing PCB and whether any proposed substitution preserves both its electrical and mechanical requirements.

RFQ تماس
XMC4200F64K256BAXQSA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200F64K256BAXQSA1

XMC4200F64K256BAXQSA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4200F64K256BAXQSA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 256 KB of flash memory and 40 KB of SRAM, housed in a 64-pin PG-LQFP-64 industrial package. It combines real-time control capability with 256 KB of on-chip program memory in a compact 64-pin surface-mount format. An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control applications. Positioned within the hierarchy of Cortex-M processor, embedded microcontroller, semiconductor, and industrial automation electronics, the XMC4200 provides a platform for combining deterministic control loops with communications, data acquisition, and supervisory functions. The principal device characteristics include an 80 MHz Cortex-M4 core, 256 KB flash, 40 KB SRAM, and 32-bit processing. Its 256 KB flash provides room for application code, configuration data, and real-time control routines, while the 40 KB SRAM supports working memory, buffers, stacks, and peripheral data. The device is identified for industrial applications in the XMC4000 family. The XMC4200 family architecture combines a Cortex-M4 processing core with embedded control peripherals. This makes it suitable for systems that must execute multiple control tasks while responding to external inputs. Pin and peripheral assignments must be checked against the manufacturer pin-description table because alternate functions and package-specific mappings determine whether each signal can be used as intended. Typical uses include industrial motor and power-control systems, industrial automation controllers, and communication-oriented embedded nodes. The 64-pin LQFP package offers more interface options than smaller microcontroller packages, which can reduce the need for external I/O expansion when a design has been planned around the available pin map. For PCB design, place the device on a multilayer board with a short ground return beneath the exposed pad area, connect all supply pins as specified in the datasheet, and decouple the supply rails close to their pins. Confirm the exact thermal-pad connection and pin-1 orientation before fabrication, especially when using the manufacturer’s evaluation-board layout as a reference. This product record combines the manufacturer ordering information with distributor technical descriptions, package and memory details, application guidance, procurement facts, and a focused design checklist. It is intended to help engineers confirm the correct device and plan an industrial Cortex-M4 control board with fewer component-level and footprint errors.

RFQ تماس
XMC4200Q48F256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48F256ABXUMA1

XMC4200Q48F256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4200Q48F256ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 80 MHz with 256 KB of embedded Flash and 40 KB of SRAM in a 48-pin VQFN package with an exposed pad. It is identified as an industrial microcontroller and combines a 3.3 V supply rating with an Arm Cortex-M4 processor core for embedded control applications. A microcontroller is a semiconductor integrated circuit that integrates a processor core, programmable memory, data memory, and peripherals into one device. The Arm Cortex-M4 core provides a 32-bit processing architecture suitable for industrial embedded systems, while the XMC4200 combines that processing capability with a balance of Flash and SRAM. Its hardware platform is intended to reduce system complexity by placing the core, memory, and embedded control functions in a single component. The principal device characteristics visible in the ordering information include an 80 MHz operating frequency, 256 KB of Flash memory, 40 KB of SRAM, and a 3.3 V supply rating. The 48-VFQFN package includes 48 pins and an exposed pad. This compact surface-mount format is suitable for space-conscious industrial controller designs, although thermal performance and exposed-pad layout must be evaluated as part of the PCB implementation. The XMC4000 family architecture is based on the Arm Cortex-M4 processor core and is positioned for energy-efficient, high-performance embedded industrial control. The combination of 256 KB Flash and 40 KB SRAM provides a meaningful code and working-data budget for control loops, communication handling, state management, and supervisory functions. Exact peripheral configurations, interrupt behavior, analog performance, and electrical limits must be confirmed against the complete manufacturer datasheet for the selected ordering code. Typical design roles for this microcontroller include industrial automation controllers, condition-monitoring equipment, motor and motion-control subsystems, communications-oriented embedded nodes, and compact control platforms. Its 80 MHz Cortex-M4 performance is suitable for deterministic control workloads, while its memory capacity can support moderate application code and working buffers without requiring an external memory interface when the application remains within those limits. PCB implementation requires careful attention to the 48-VFQFN exposed pad, power-supply routing, high-frequency return paths, and decoupling capacitor placement. The exposed pad should be connected according to the manufacturer land-pattern and thermal guidance. Firmware must also account for the exact peripheral set, pin multiplexing, startup behavior, and electrical operating limits documented for this ordering designation. This product record combines the manufacturer ordering information, the XMC4100/XMC4200 family datasheet, and distributor technical summaries into an engineering-focused overview. It also identifies the absence of a verified pin-compatible alternative, avoids treating a related lower-memory device as a drop-in replacement, and directs engineers to the manufacturer datasheet for final pin assignment, electrical limits, peripheral details, and PCB implementation requirements.

RFQ تماس
XMC4200Q48F256BAXUMA1 - 80MHz Arm Cortex-M4 MCU | Infineon
XMC4200Q48F256BAXUMA1

XMC4200Q48F256BAXUMA1 - 80MHz Arm Cortex-M4 MCU | Infineon

The Infineon XMC4200Q48F256BAXUMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller with an 80 MHz operating frequency, 256 KB of embedded Flash memory, and 40 KB of SRAM in a 48-pin VQFN package with an exposed pad. It belongs to the XMC4000 family and integrates CAN and LIN networking, timer/PWM control, and general-purpose microcontroller resources for embedded industrial designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The XMC4000 family follows the hierarchy MCU, embedded microcontroller, microcontroller, and semiconductor. Its Arm Cortex-M4 core supports efficient real-time control while the CAN and LIN interfaces allow the device to communicate with industrial automation, automotive networking, and distributed control equipment. The XMC4200Q48F256BAXUMA1 combines 80 MHz processing performance with 256 KB of Flash and 40 KB of SRAM. The Flash memory provides room for application code and configuration data, while SRAM supports working memory, stack operations, buffers, and real-time data processing. Its integrated CAN and LIN connectivity reduces the need for external communication transceivers when designing networked embedded systems, although transceiver selection and bus protection remain board-level requirements. The XMC4200 part of the XMC4000 family is positioned for industrial control applications that benefit from an Arm Cortex-M4 processor and dedicated communication peripherals. Compared with a general-purpose Cortex-M4 design, this device integrates communication and timing resources into a compact 48-VQFN package. This consolidation can reduce board area when CAN, LIN, timers, and PWM functions are all required by the application. Typical applications include industrial automation controllers, CAN-based motor and machine controls, LIN-connected automotive sub-systems, distributed sensor nodes, industrial communication gateways, and compact embedded control panels. The combination of 256 KB Flash, 40 KB SRAM, and 80 MHz operation is suitable for protocol handling, supervisory logic, data acquisition, and closed-loop control without requiring a separate processor. PCB design should preserve the exposed-pad thermal and electrical requirements of the VQFN package. Use a manufacturer-compliant land pattern, connect the exposed pad to the appropriate ground plane, and place decoupling capacitors close to the power pins. Firmware deployment should also account for the 256 KB Flash limit, boot and application organization, communication timing, and the pin multiplexing required by the selected peripheral configuration. This page consolidates the component specifications, manufacturer documentation, package information, application guidance, and qualification criteria into a compact engineering reference. It also distinguishes pin-compatible family alternatives from options that require different firmware, package, peripheral, or qualification validation.

RFQ تماس
XMC4200Q48K256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48K256ABXUMA1

XMC4200Q48K256ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4200Q48K256ABXUMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller with an 80 MHz core, 256 KB of flash memory, 40 KB of SRAM, and a 48-pin VQFN package with an exposed pad. It is designed for embedded industrial control applications requiring deterministic real-time performance, flexible serial connectivity, and a compact surface-mount footprint. An Arm Cortex-M4 microcontroller is a reduced-instruction-set embedded processor within the microcontroller and semiconductor hierarchy. It combines processor performance, embedded flash, SRAM, peripherals, and interrupt-driven control in one integrated circuit. XMC devices belong to Infineon's XMC4000 family and target industrial automation, motor control, communications, sensing, and connected embedded equipment. Three defining specifications are the 80 MHz operating frequency, 256 KB flash, and 40 KB SRAM. The 80 MHz Cortex-M4 core supports efficient control-loop execution, while 256 KB of embedded flash accommodates application code and data. The 40 KB SRAM provides working memory for real-time algorithms and peripheral data handling. The package is a 48-terminal PG-VQFN with an exposed thermal pad for compact PCB placement and improved heat dissipation. The device is positioned for industrial environments requiring operation from -40°C to 125°C. Its microcontroller architecture integrates conventional digital control functions with dedicated peripherals for communication and timing, allowing designers to consolidate functions that otherwise require separate interface controllers. The exposed pad should be connected to the PCB ground plane according to the manufacturer's package guidance to optimize thermal and electrical performance. Typical applications include industrial automation controllers, sensor and condition-monitoring systems, motor-control equipment, communications gateways, and compact embedded control platforms. The 80 MHz processing rate is useful for proportional-integral-derivative control, state-machine execution, communication protocol handling, and signal processing. Its 256 KB flash supports moderately complex firmware while maintaining a compact 48-pin package. For PCB design, place the exposed pad on a dedicated solderable thermal and ground pad, preserve the manufacturer-recommended footprint dimensions, and provide short, low-impedance supply connections. Keep analog and communication interfaces away from fast digital return paths when the application includes sensitive measurements. Firmware configuration should also account for the industrial temperature rating and all peripheral operating constraints. This page combines the exact ordering information, core specifications, package information, design guidance, selection criteria, and verified same-family alternatives to support faster engineering evaluation and sourcing of the XMC4200Q48K256ABXUMA1.

RFQ تماس
XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48K256BAXUMA1

XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4200Q48K256BAXUMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating up to 80 MHz, with 256 KB of flash memory, 40 KB of SRAM, CAN and LIN networking, and a 48-pin VQFN package with an exposed pad. It combines a hardware floating-point unit and high-resolution PWM timers with mixed-signal acquisition capabilities for motor-drive, motion-control, and industrial communication systems. An industrial microcontroller is a semiconductor device designed to execute real-time control, monitoring, and communication tasks in demanding embedded systems. The XMC4000 family belongs to the ARM Cortex-M4 microcontroller class, combining processor performance, embedded nonvolatile memory, RAM, communication peripherals, timers, and analog interfaces. This integration places the XMC4200 within the broader hierarchy of embedded processor, microcontroller, and industrial automation semiconductor categories. Principal features include an 80 MHz ARM Cortex-M4 core, 256 KB flash, 40 KB SRAM, hardware floating-point capability, dual CAN/LIN-oriented networking support, and high-resolution PWM timers. The 256 KB flash capacity provides room for application code, configuration data, and firmware updates, while the 40 KB SRAM supports real-time control state, communication buffers, and mixed-signal processing. The industrial temperature range extends from -40°C to 125°C. The target device is based on the Infineon XMC4200-Q48K256-BA, whose ordering information identifies 256 KB flash, 40 KB SRAM, and industrial-grade temperature operation. Distributor records describe the programmable part as a 48-lead PG-VQFN-53 package with an exposed thermal pad. Its CAN, LIN, timer/PWM, and mixed-signal resources support designs requiring deterministic control and networked fieldbus communication without relying solely on a general-purpose processor. Typical applications include servo and motor controllers, industrial CAN and LIN nodes, factory automation equipment, industrial sensor hubs, motion-control platforms, and mixed-signal monitoring systems. In each case, the MCU consolidates real-time processing and communication while reducing the number of discrete interface components required on the board. Designers should verify every peripheral assignment, pin multiplexing option, and exposed-pad connection against the manufacturer datasheet before layout release. Input and output signal integrity, CAN and LIN termination, clock configuration, decoupling, and thermal management are especially important in electrically noisy industrial environments. Firmware should also include watchdog, fault-state, and brownout recovery behavior appropriate to the target system. This page combines verified manufacturer and distributor specifications, commercial availability information, a strict drop-in assessment, and application-oriented design guidance. It distinguishes documented values from missing technical data so engineers can make sourcing and design decisions without mistaking unsupported assumptions for manufacturer specifications.

RFQ تماس
XMC4300-F100F256 - 144MHz Cortex-M4 MCU 256KB Flash | Infineon
XMC4300-F100F256

XMC4300-F100F256 - 144MHz Cortex-M4 MCU 256KB Flash | Infineon

The Infineon XMC4300-F100F256 AA is a 32-bit ARM Cortex-M4 industrial microcontroller in a 100-pin LQFP package, featuring 256 KB of on-chip flash memory, 128 KB SRAM, and an integrated Ethernet MAC that natively supports EtherCAT slave operation. It is part of the XMC4000 family, which combines the Cortex-M4 core with DSP instructions and a single-precision FPU, plus Infineon's deterministic peripheral set designed for real-time industrial control. Background: An ARM Cortex-M4 microcontroller is a 32-bit MCU based on the ARMv7-M architecture that integrates a Thumb-2 instruction set, optional single-precision floating-point unit, and DSP extensions. Within the broader taxonomy, this places the XMC4300 as: microcontroller -> 32-bit MCU -> ARM Cortex-M4 MCU -> industrial-grade MCU -> real-time control MCU -> semiconductor. The XMC4000 family extends this with Infineon's peripheral subsystem for motor control, power conversion, and fieldbus communication. Key features of the XMC4300-F100F256 include a 144 MHz core clock, 128 KB of integrated SRAM with parity, hardware EtherCAT slave controller (ECAT), USB 2.0 full-speed OTG, up to four USIC channels for flexible serial communication (UART, SPI, I2C, I2S), two CAN nodes, and a 12-bit multi-channel ADC. The PG-LQFP-100-25 package with exposed pad supports an extended industrial temperature range of -40C to +85C. The on-chip EtherCAT Slave Controller (ESC) is the differentiating feature, enabling sub-millisecond cycle times without an external ASIC. At the architecture level, the XMC4300 uses an M-DSP/M-FPU Cortex-M4 core from ARM, paired with Infineon's proprietary peripheral interconnect and a hierarchical bus matrix that gives DMA-capable channels direct access to SRAM, peripherals, and the EtherCAT Dual Port RAM. The integrated EtherCAT Slave Controller offloads the EtherCAT state machine from the application CPU, leaving 144 MHz of compute available for the application layer. Typical use cases include EtherCAT slave IO modules, industrial sensor hubs, servo drive auxiliary controllers, PLC expansion modules, and building automation gateways. The XMC4300-F100F256 AA fits EtherCAT applications because the integrated ESC eliminates the need for an external ET1100 ASIC, reducing BOM cost and PCB area while still meeting EtherCAT conformance class compliance. Design consideration: the PG-LQFP-100-25 exposed-pad variant must be soldered to a sufficient copper pad on the PCB to dissipate up to ~1 W of internal dissipation; missing or weak thermal pad soldering can lead to thermal shutdown under sustained EtherCAT and CPU load. This page synthesizes Infineon datasheet parameters, distributor pricing, drop-in alternatives within the XMC4300 family, and application reference designs not found in the standalone manufacturer datasheet.

RFQ تماس
XMC4300F100F256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
XMC4300F100F256AAXQMA1

XMC4300F100F256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4300F100F256AAXQMA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 144 MHz, with 256 KB of flash memory, 128 KB of SRAM, and an integrated Ethernet MAC in a PG-LQFP-100-25 package. The device belongs to the XMC4000 family of industrial microcontrollers and combines a high-performance processor core with real-time Ethernet connectivity and mixed-signal peripherals. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the wider category of microcontrollers, embedded processors, and semiconductors. It combines a processor core with memory, communication peripherals, timers, and analog or mixed-signal resources in one integrated circuit. XMC devices add industrial real-time capabilities and deterministic peripherals to the standard Arm Cortex-M architecture, making them suitable for control systems that require both network communication and precise timing. The XMC4300F100F256AAXQMA1 provides 256 KB of flash for firmware and 128 KB of SRAM for working data. Its 144 MHz Arm Cortex-M4 core includes the architectural features expected of the Cortex-M4 family, while the integrated Ethernet MAC supports industrial Ethernet-connected equipment. The PG-LQFP-100-25 package provides 100 leads and is intended for surface-mount PCB assembly. The order code identifies the industrial XMC4300 configuration and its qualification and temperature-grade attributes. EtherCAT support is an important feature of the XMC4300 family. The family documentation describes EtherCAT as a real-time Ethernet standard intended to combine substantial bandwidth with deterministic communication timing. Integrating this functionality into an Arm Cortex-M4 microcontroller allows EtherCAT nodes to be implemented without requiring a separate communications processor, provided the system also uses suitable external network hardware. Typical uses include industrial automation controllers, EtherCAT slave equipment, motor-control systems, industrial communication gateways, and embedded control platforms with both analog and digital signal-chain requirements. The 144 MHz processing rate supports responsive control loops, while the integrated Ethernet MAC and EtherCAT capability address synchronized networking. Designers should account for the exact peripheral mapping, electrical limits, clock requirements, and package dimensions shown in the manufacturer datasheet and reference manual. PCB design should preserve the recommended power, decoupling, clock, reset, and analog grounding arrangements from the XMC4300 documentation. The 100-lead LQFP geometry requires adequate copper clearance between adjacent pins and careful inspection of fine-pitch soldering. Firmware support should account for peripheral-specific startup requirements and the timing constraints of EtherCAT and other high-speed communication functions. This product page combines manufacturer specifications with application guidance, practical PCB considerations, and a qualified comparison framework. It is intended to help engineers confirm memory capacity, processor performance, package compatibility, connectivity requirements, and implementation risks before committing the XMC4300F100F256AAXQMA1 to an industrial embedded design.

RFQ تماس
XMC4300F100K256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
XMC4300F100K256AAXQMA1

XMC4300F100K256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4300F100K256AAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 144 MHz core, 256 KB of Flash memory, and Ethernet MAC capability in a 100-pin PG-LQFP package. It combines deterministic microcontroller control with embedded-network connectivity, making it suitable for industrial gateways, connected controllers, and networked automation equipment. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor designed for embedded control. The Cortex-M4 core combines efficient exception handling, low-latency peripheral access, and optional signal-processing instructions within the broader MCU semiconductor category. In the XMC4000 family, this processing capability is combined with on-chip peripherals, memory, and communications resources for real-time industrial designs. The XMC4300F100K256AAXQMA1 operates at up to 144 MHz and includes 256 KB of Flash for firmware and application code. Its Ethernet MAC provides a hardware interface for connected-control and gateway products. The 100-pin LQFP package supports a high pin count for external interfaces while remaining compatible with conventional surface-mount PCB assembly. The manufacturer identifies the device as an industrial XMC4000-series product. The device architecture is based on the ARM Cortex-M4 processor and includes on-chip memory and peripheral subsystems. The integrated Ethernet MAC allows a single-chip architecture to handle real-time control and network communication without requiring a separate Ethernet controller. Peripheral interfaces, timers, communications channels, and interrupt resources support industrial control, sensing, communications, and supervisory functions. Typical uses include industrial Ethernet gateways, programmable automation controllers, building automation equipment, motor and motion-control systems, connected sensors, and embedded network appliances. Its combination of 144 MHz processing performance and 256 KB Flash is particularly useful when the firmware must combine network protocol handling with deterministic control tasks in a compact industrial design. PCB design should follow the Infineon XMC4300 datasheet for pin multiplexing, power-supply connections, decoupling, clock configuration, and exposed-pad or thermal-layout requirements. Firmware planning should also account for the Ethernet PHY arrangement: the MAC does not imply that an external transceiver is unnecessary, so signal integrity and magnetics must be designed around the complete physical network interface. This page combines the manufacturer product information, ordering details, technical highlights, application guidance, and verified drop-in alternatives to support faster component selection and PCB planning for industrial embedded-networking designs.

RFQ تماس
XMC4300F100K256AAXUMA1 - 144MHz Arm Cortex-M4 MCU, 256KB Flash | Infineon
XMC4300F100K256AAXUMA1

XMC4300F100K256AAXUMA1 - 144MHz Arm Cortex-M4 MCU, 256KB Flash | Infineon

The Infineon XMC4300F100K256AAXUMA1 is a 32-bit industrial microcontroller built around an Arm Cortex-M4 core with integrated Floating Point Unit and DSP instructions, operating at up to 144 MHz with 256 KB of embedded Flash memory and an on-chip Ethernet MAC, housed in a 100-pin PG-LQFP package with an exposed thermal pad. The 3.3 V supply part number suffix indicates the intended operating supply class for industrial systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash program memory, RAM, and dedicated peripherals into one package. The XMC4000 family from Infineon sits in the industrial 32-bit microcontroller segment, positioned between general-purpose 8/16-bit control devices and higher-end application processors, and belongs to the broader hierarchy of embedded processors used in industrial automation, networking, and motor control equipment. Key features of this device include the 144 MHz Arm Cortex-M4F core with single-precision FPU and DSP instruction extensions for fast control-loop and signal-processing work, 256 KB of Flash for firmware and boot code, an integrated Ethernet MAC for networked control, and a rich set of industrial peripherals typical of the XMC4000 family such as multiple timer/counter units, serial interfaces, and analog conversion channels. The Cortex-M4 architecture with an FPU is also what allows deterministic real-time behavior combined with a familiar ARM toolchain ecosystem. The XMC4300-F100K256-AA variant carries the AA industrial grade designation, meaning it is intended for extended industrial temperature and qualification requirements rather than cost-sensitive consumer applications. Using the Arm Cortex-M4 instruction set means existing CMSIS-based firmware, HAL libraries, and GCC/IAR/Keil toolchains can be reused, which lowers migration effort for teams moving from smaller Cortex-M parts. Typical applications include industrial Ethernet gateways and PLC communication controllers, factory automation nodes, motor and motion control controllers, sensor and actuator network hubs, building automation and HVAC controllers, and industrial sensor equipment that needs an Ethernet interface for connectivity. The key design consideration is the exposed pad on the LQFP-100 package: it must be tied to ground with a solid copper pour and adequate via stitching to carry core current and keep junction temperature within the device limit at 144 MHz operation. This page consolidates manufacturer part details, distributor availability references, drop-in alternatives within the XMC4000 family, and practical PCB and thermal design guidance that are not collected together on a single manufacturer datasheet page.

RFQ تماس
XMC4400F100F256ABXQSA1 - Cortex-M4 MCU | Infineon
XMC4400F100F256ABXQSA1

XMC4400F100F256ABXQSA1 - Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100F256ABXQSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 256 KB of flash memory, and 80 KB of SRAM in a 64-LQFP package with an exposed pad. The device belongs to the XMC4000 family and integrates Ethernet connectivity and deterministic microcontroller peripherals for connected industrial equipment. A microcontroller is a programmable semiconductor that executes embedded control code, monitors inputs, drives outputs, and manages communication interfaces. The XMC4400 combines an ARM Cortex-M4 processor with flash memory, SRAM, analog and digital peripherals, Ethernet support, and debug facilities in one integrated circuit. Its role within an embedded system spans processor core, real-time control peripheral, communication controller, and industrial-control semiconductor. The 120 MHz Cortex-M4 core supports efficient 32-bit processing, while the XMC4000 peripheral architecture supports predictable control-loop execution. The 256 KB embedded flash stores firmware and configuration data, and the 80 KB SRAM provides working memory for protocol stacks, acquisition buffers, and control algorithms. Integrated Ethernet makes the device suitable for networked industrial nodes without requiring a separate communication processor. Three principal characteristics define this configuration: a 120 MHz ARM Cortex-M4 processor, 256 KB of embedded flash, and a compact 64-LQFP package. Infineon identifies the underlying XMC4400-F100F256-BA device as an industrial Cortex-M4 microcontroller with Ethernet. The ordering designation XMC4400F100F256ABXQSA1 identifies the specific package, temperature, flash-memory, and orderable configuration used in the product record. Typical applications include industrial Ethernet controllers, programmable automation equipment, connected sensors, motor and motion-control systems, and embedded gateways. The microcontroller is especially useful where a single-core design must combine real-time control, local data processing, and Ethernet communication. Its combination of control peripherals, memory, and connectivity supports consolidation of functions that might otherwise require several discrete devices. When designing around the XMC4400F100F256ABXQSA1, preserve the exposed-pad thermal and electrical requirements of the LQFP package and assign every pin according to the manufacturer pin-description table. The Ethernet interface also requires careful clock, magnetics, routing, and isolation planning. Firmware selection should account for the 256 KB flash limit and the 80 KB SRAM allocation, including driver stack, application code, and diagnostic data. This product record combines the exact XMC4400F100F256ABXQSA1 ordering information with manufacturer electrical documentation, package guidance, application context, and same-family migration options. It is intended to support component identification, firmware and peripheral planning, PCB design, and replacement assessment without obscuring the differences between ordering codes and electrically distinct devices.

RFQ تماس
XMC4400F100F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F256BAXQMA1

XMC4400F100F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4400F100F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB flash, 80 KB SRAM, Ethernet connectivity, and a 100-pin PG-LQFP package with an exposed pad. The device combines a high-resolution PWM unit with 150 ps resolution and is positioned for real-time HMI, industrial automation, networking, and signal-processing control. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the microcontroller and embedded-processing hierarchy. It executes control software, services digital inputs, drives outputs, and manages communication interfaces in equipment that requires deterministic real-time behavior. The XMC4400 combines that processor core with analog, timing, communications, and debugging peripherals intended to reduce external component count in industrial control designs. Principal device attributes include a 120 MHz Cortex-M4 core, 256 KB program flash, 80 KB SRAM, and Ethernet support. The 150 ps PWM resolution supports precise pulse timing, while the 3.3 V device and industrial temperature designation align it with embedded industrial systems. Its PG-LQFP-100-25 package provides 100 leads and an exposed thermal pad for board-level heat spreading. The XMC4400 integrates a broad peripheral set around the Cortex-M4 core, including Ethernet and a high-resolution PWM unit. Its memory arrangement provides 256 KB for firmware and 80 KB for working data, making it suitable for control loops, communication stacks, and application logic. The exact peripheral inventory and electrical limits for the selected ordering designation should be confirmed against the Infineon XMC4400 datasheet before schematic release. Typical uses include industrial Ethernet controllers, programmable logic controllers, real-time human-machine interfaces, digital power conversion, motor-control front ends, and embedded signal-processing systems. Ethernet supports network-connected supervisory equipment, while deterministic PWM and timer resources support precise actuator control. The 120 MHz processing rate also allows control software and communications tasks to coexist without relying on a separate processor. The most important layout consideration is thermal management around the exposed pad. Follow the manufacturer land-pattern and copper recommendations rather than treating the pad as an optional thermal feature. Decoupling, Ethernet routing, analog grounding, and exposed-pad connection must also follow the pin-description and layout guidance in the Infineon datasheet. This product page combines the manufacturer ordering information, core memory and operating attributes, application context, engineering design notes, and qualified same-brand comparison parts. It is intended to accelerate component selection while keeping schematic, firmware, and qualification decisions tied to Infineon documentation.

RFQ تماس
XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512ABXQMA1

XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100F512ABXQMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and a 100-pin PG-LQFP package. It belongs to the XMC4000 family and integrates a 10/100 Ethernet MAC for industrial communication designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. In the system hierarchy, the XMC4400 is an MCU, a more specific form of embedded processor and semiconductor. Unlike a general-purpose desktop CPU, an MCU is designed around deterministic control, communication, and real-time system tasks, with its peripherals and memory optimized for embedded products. The device's principal characteristics include an Arm Cortex-M4 processor core, 120 MHz operating frequency, 32-bit architecture, and 512 KB of flash. Infineon identifies the XMC4400-F100F512-BA as an industrial 32-bit microcontroller with a 10/100 Ethernet MAC. The PG-LQFP-100-11 package provides 100 externally accessible connections for digital control, communications, clocking, power, debug, and analog-interface requirements. The Cortex-M4 architecture uses the Arm Thumb instruction set and supports efficient interrupt-driven control software. Its floating-point capability makes it suitable for applications that combine digital control with numerical processing. The integrated Ethernet MAC supports connected industrial equipment, although the complete electrical design still requires the external magnetics, clocking, protection, and connector implementation described by Infineon. Typical uses include industrial Ethernet controllers, factory automation equipment, motor-control systems, building automation interfaces, connected measurement instruments, and embedded network gateways. The 120 MHz processing rate provides useful headroom for communication stacks, supervisory control, diagnostics, and real-time control tasks when the software architecture and interrupt latency are designed together. PCB planning should begin with the manufacturer's pin-description table and reference design because the 100-pin package contains dedicated power, ground, debug, Ethernet, analog, and digital functions. Pay particular attention to ground distribution, decoupling, clock source selection, Ethernet magnetics placement, and programming or debug access before finalizing the board layout. This product record combines the manufacturer ordering information, package and memory details, Ethernet function description, and source links needed for engineering review. It also organizes replacement considerations and design guidance so engineers can assess fit, firmware impact, and layout compatibility before committing a new design.

RFQ تماس
XMC4400F100F512ABXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512ABXUMA1

XMC4400F100F512ABXUMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100F512ABXUMA1 is a 32-bit industrial microcontroller based on the Arm Cortex-M4 core, operating at 120 MHz with 512 KB of flash memory in a PG-LQFP-100 package with an exposed pad. The device belongs to the XMC4000 family and includes a 10/100 Ethernet MAC, making it suitable for industrial networking, embedded control, and connected automation systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. Within the embedded-control hierarchy, this device is an Arm Cortex-M4 MCU, a 32-bit real-time microcontroller, and an industrial communications controller. Its combination of deterministic peripheral integration and Ethernet connectivity allows a single controller to supervise sensors, actuators, communications, and safety-oriented control functions without requiring a separate network interface. The XMC4400F100F512ABXUMA1 provides 512 KB of flash, a 120 MHz clock, and a 32-bit Arm Cortex-M4 processing core. Its 10/100 Ethernet MAC supports industrial Ethernet designs, while the PG-LQFP-100 package exposes a broad set of digital and analog I/O through 100 pins. The exposed die pad must be connected to the common ground potential, as specified for packages containing this thermal and electrical ground feature. The XMC4400 series architecture combines a high-performance Cortex-M4 core with dedicated real-time control and communication resources. At 120 MHz, the processor provides substantially more computational headroom than typical low-rate control MCUs, while the Ethernet MAC allows network-connected equipment to exchange operational data and support higher-level industrial protocols implemented in firmware. Detailed peripheral assignments, electrical limits, clock options, and package dimensions should be taken from the manufacturer datasheet and reference manual before schematic or PCB sign-off. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, networked sensor gateways, industrial communications equipment, and compact embedded control modules. The 512 KB flash capacity provides room for application code, communication stacks, configuration data, and update logic, while the 100-pin package supports the pin count required by multi-interface industrial designs. PCB implementation requires careful attention to the common-ground architecture and exposed-pad connection. Connect VSS, VSSA, and VSSO to the same ground potential, and connect the exposed pad to common ground as directed by the manufacturer layout guidance. Confirm all decoupling, power-supply sequencing, analog-ground, and high-speed Ethernet layout requirements against the XMC4400 hardware documentation before production release. This product page consolidates the verified ordering identity, core frequency, memory capacity, package, and Ethernet configuration with engineering guidance for comparison and design review. It also distinguishes exact-order alternatives from broader XMC4400 family references so procurement teams can assess substitution risk without treating electrically similar but undocumented parts as drop-in replacements.

RFQ تماس
XMC4400F100F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512BAXQMA1

XMC4400F100F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100F512BAXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and integrated 10/100 Ethernet MAC capability. The device is supplied in a 100-pin LQFP package with an exposed pad. It belongs to the XMC4000 family and combines a high-performance Cortex-M4 core with an industrial peripheral set for embedded control, communications, and real-time applications. The XMC4000 series is a microcontroller family within the broader embedded semiconductor and industrial automation hierarchy. It provides a deterministic hardware platform for motor control, industrial networking, sensor acquisition, and connected machinery. The XMC4400F100F512BAXQMA1 is particularly suited to designs requiring substantial flash capacity, high clock speed, Ethernet connectivity, and deterministic control peripherals without using a separate communications processor. Key features include an ARM Cortex-M4 processor at 120 MHz, 512 KB of flash, 32-bit data-bus capability, a 10/100 Ethernet MAC, 12-bit ADCs, a 12-bit DAC, and a high-resolution PWM unit. The Ethernet MAC supports industrial Ethernet applications, while the advanced timer and PWM resources support precise motor and power conversion control. The 100-LQFP package exposes the required peripheral and power connections while supporting conventional board assembly and thermal management through its exposed pad. The microcontroller’s architecture is designed for embedded systems requiring both control-loop responsiveness and communication capability. Its 120 MHz Cortex-M4 execution rate supports protocol processing, supervisory logic, and real-time control tasks. The Ethernet MAC reduces the need for external Ethernet hardware when the system design uses compatible PHY components. The ADC and DAC resources support analog measurement, signal conditioning, and waveform generation without requiring separate converters in suitable designs. Typical applications include industrial Ethernet controllers, factory automation equipment, motor drives, power conversion systems, building automation controllers, and embedded gateways. The device can also serve in sensor-heavy industrial systems where periodic sampling, communication, and control functions must coexist in one device. Its exposed-pad LQFP package requires careful PCB thermal design to dissipate power reliably. Designers should verify the exact pin assignments, power-supply sequencing, analog input limits, and exposed-pad connection requirements in the Infineon datasheet before layout release. Ethernet designs also require correct PHY integration, magnetic-component selection, controlled-impedance routing, and isolation or surge-protection planning according to the installation environment. The manufacturer documentation is the authoritative source for final electrical limits and board implementation details.

RFQ تماس
XMC4400F100F512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512BAXUMA1

XMC4400F100F512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100F512BAXUMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating up to 120 MHz, with 512 KB of embedded flash and a 100-pin PG-LQFP package. The XMC4000 series provides integrated Ethernet connectivity, including a 10/100 Ethernet MAC, for connected industrial equipment requiring deterministic real-time control and network communication. Its LQFP-100 package exposes the device's digital and analog peripherals in a surface-mount format suitable for automated assembly. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The ARM Cortex-M4 core gives this device a 32-bit architecture suited to industrial automation, embedded networking, motor control, and data acquisition. The XMC4000 family combines the Cortex-M4 core with on-chip Ethernet, analog interfaces, timers, communication peripherals, and safety-oriented features designed for industrial applications. The 120 MHz operating frequency provides processing headroom for protocol handling, control-loop execution, diagnostics, and application logic. Its 512 KB flash memory stores firmware, configuration data, and application code, while the device's Ethernet MAC supports connection to 10/100 Mb/s Ethernet networks. The manufacturer identifies the XMC4400-F100F512-BA family variant as an industrial 32-bit Cortex-M4 device with 10/100 Ethernet MAC functionality. The XMC4400F100F512BAXUMA1 ordering designation identifies the 100-pin package, 512 KB flash configuration, industrial temperature/profile option, tape-and-reel order code, and grade suffix. Its 100-pin PG-LQFP-100 package offers a larger pin count than small-outline packages, supporting broad access to the mixed-signal and communication resources available in the XMC4000 family. Exact pin assignments and exposed-pad connections should be taken from the Infineon XMC4400 datasheet and package drawing before layout release. Typical uses include industrial Ethernet controllers, factory automation nodes, embedded gateways, motor and power-control systems, industrial sensors, and networked test equipment. For these applications, the device's 120 MHz Cortex-M4 performance and integrated 10/100 Ethernet MAC reduce the need for separate network controllers while keeping real-time processing and communications on the same device. PCB design should treat all 100 package terminals and the exposed pad, where applicable, according to the manufacturer's land pattern and thermal guidance. Decoupling, analog grounding, Ethernet magnetics, clock stability, and exposed-pad vias are especially important in a mixed-signal industrial design. Firmware selection should also verify the complete ordering-code decoding and all peripheral variants associated with the exact derivative. This product page combines the manufacturer ordering information with practical engineering guidance for industrial networking, firmware selection, PCB implementation, and drop-in replacement assessment. It is intended to help engineers identify whether the XMC4400F100F512BAXUMA1 matches a required Cortex-M4, 512 KB flash, 10/100 Ethernet, and 100-pin LQFP platform before requesting a quotation.

RFQ تماس