XMC4108F64K64BAXQMA1 - 80MHz ARM Cortex-M4 MCU | Infineon
MPN: XMC4108F64K64BAXQMA1 ✓ فعالXMC4108F64K64BAXQMA1 نمای کلی
A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral functions into one embedded-system component. In the product hierarchy, this part is an ARM Cortex-M4 microcontroller, an XMC4000-family device, an industrial microcontroller, and ultimately an embedded semiconductor. The Cortex-M4 core uses a 32-bit architecture, making the XMC4108F64K64BAXQMA1 suitable for control logic, industrial automation, sensor monitoring, motor-control support, and connected embedded equipment where a deterministic microcontroller platform is required.
The principal verified characteristics are the 80 MHz CPU frequency, 64 KB flash, and 64-lead PG-LQFP-19 package. The related Infineon XMC4108 family information also identifies 20 KB SRAM for the XMC4108-F64K64-BA device. These figures should be checked against the exact ordering code and package-specific datasheet before final design release. No operating-voltage range, GPIO count, peripheral inventory, temperature range, or automotive qualification status was supplied in the verified source data and therefore should not be inferred here.
Typical design uses include industrial controller boards, factory automation modules, building and environmental monitoring systems, communication gateways, and compact embedded control products. In these systems, the 80 MHz Cortex-M4 core provides computational headroom for control algorithms, while 64 KB flash stores firmware and configuration data. The LQFP package is also useful for prototypes, automated assembly, and designs requiring accessible leads during inspection or rework.
Designers should confirm the exact pin multiplexing, peripheral availability, power requirements, clock configuration, and exposed-pad connection requirements from the Infineon datasheet before layout release. The LQFP footprint is sensitive to thermal and EMC performance, so a solid ground-plane strategy, short return paths, and decoupled supply rails remain important. This page combines verified distributor and manufacturer information with application guidance, pricing-status notes, and explicitly marked data gaps for engineering review.
جایگزین‌های drop-in برای XMC4108F64K64BAXQMA1 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای XMC4108F64K64BAXQMA1 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.
XMC4108F64K64ABXQMA1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XMC4104F64K64BAXQMA1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XMC4108F64K64BAXQMA1 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | ARM Cortex-M4 32-bit microcontroller |
| Series | XMC4000 family |
| Processor Core | ARM Cortex-M4 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 20 KB |
| ولتاژ تغذیه | 3.3 V |
| بسته‌بندی | PG-LQFP-64-19 |
| Package Pin Count | 64 pins |
| نوع نصب | Surface mount |
| Product Class | Industrial microcontroller |
راهنمای پیکربندی پین XMC4108F64K64BAXQMA1 64 pins
پیکربندی پین برای XMC4108F64K64BAXQMA1 (پکیج 64 pins). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای XMC4108F64K64BAXQMA1.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
XMC4108F64K64BAXQMA1 مناسب است برای 6 کاربردs: Industrial Automation Controller, Sensor Monitoring and Data Acquisition, Building and Environmental Control, Communication Gateway Equipment, Motor Control Support, Embedded Condition Monitoring.
Industrial Automation Controller
The XMC4108F64K64BAXQMA1 fits compact industrial automation controllers because its verified 80 MHz ARM Cortex-M4 core provides real-time processing capacity and its 64 KB flash supports embedded firmware. The device belongs to Infineon's industrial XMC4000 family and is available in a 64-lead PG-LQFP-64-19 package suited to automated assembly. A controller can execute sequencing logic, coordinate inputs, and manage actuator commands while retaining a straightforward package for inspection and rework. Before schematic release, engineers should verify the required GPIO, timers, communication peripherals, supply range, and temperature rating from the exact Infineon datasheet.
پیشنهادی
Sensor Monitoring and Data Acquisition
The 32-bit XMC4108F64K64BAXQMA1 is suitable for sensor monitoring nodes that must sample inputs, apply filtering, and maintain local control state. Its 80 MHz Cortex-M4 core offers more arithmetic headroom than an 8-bit controller, while 64 KB flash provides room for firmware and configuration tables, and the related family entry identifies 20 KB SRAM. The LQFP package facilitates board-level assembly and prototype accessibility. Exact ADC characteristics, GPIO count, acquisition timing, and analog supply limits were not included in the verified data, so analog interface design must wait for confirmation from the manufacturer datasheet.
پیشنهادی
Building and Environmental Control
The XMC4108F64K64BAXQMA1 can support building-control subnodes for HVAC coordination, lighting control, occupancy systems, or environmental monitoring. Its verified 80 MHz ARM Cortex-M4 processing allows local control logic to run without continuous network activity, and 64 KB flash accommodates embedded application code. The industrial-family positioning is appropriate for equipment intended for controlled industrial environments, but a building product still requires verification of operating temperature, EMC, and any regional certification. Confirm peripheral selection, communication requirements, and power-management behavior against the exact ordering code before release.
پیشنهادی
Communication Gateway Equipment
The XMC4108F64K64BAXQMA1 is suitable for protocol-conversion and communication gateway modules where a deterministic 32-bit MCU must manage buffering, state machines, and device interfaces. Its 80 MHz Cortex-M4 core can process protocol tasks concurrently, and its 64 KB flash stores firmware for gateways with moderate code complexity. The 64-lead LQFP package supports automated production and mixed-volume industrial assembly. The verified data does not list Ethernet, CAN, USB, or serial peripherals, so engineers must confirm that the required interface set exists in the exact XMC4108 variant before assigning it as the gateway controller.
پیشنهادی
Motor Control Support
The XMC4108F64K64BAXQMA1 can serve as the supervisory controller in small motor-control systems where fast execution is needed for command processing and protection logic. Its 80 MHz 32-bit Cortex-M4 core is more suited to deterministic control sequencing than a basic 8-bit MCU, while 64 KB flash can hold motion tables and application logic. The exact timer channels, PWM outputs, capture functions, and analog inputs were not present in the verified data and must be checked in the Infineon documentation. Timing accuracy and current feedback should be validated at the subsystem level before connecting power stages.
پیشنهادی
Embedded Condition Monitoring
The XMC4108F64K64BAXQMA1 can be integrated into machinery and asset-condition monitoring equipment to process vibration, temperature, or current-related measurements. Its 80 MHz ARM Cortex-M4 core supports time-critical filtering and feature extraction, and the 64 KB flash stores embedded algorithms and diagnostic tables. The 20 KB SRAM associated with the related XMC4108-F64K64-BA device provides working memory for short processing buffers. Signal-chain suitability depends on the available ADC, timer, and interface resources, which were not specified in the verified sources and therefore require datasheet confirmation before analog front-end design.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای XMC4108F64K64BAXQMA1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | XMC4108F64K64ABXQMA1 | XMC4104F64K64BAXQMA1 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-64-19 | 64-LQFP - same package family | 64-LQFP - same package family |
| CPU Architecture | 32-bit | 32-bit | 32-bit |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB |
| Device Designation | XMC4108F64K64BAXQMA1 | XMC4108 with AB ordering option | XMC4104 with BA ordering option |
تفاوت‌های کلیدی
- Exact BA ordering configuration (در مقابلXMC4108F64K64ABXQMA1)
- XMC4108 family designation (در مقابلXMC4104F64K64BAXQMA1)
- Documented processor and memory configuration (در مقابلXMC4104F64K64BAXQMA1)
- Exact manufacturer and distributor traceability (در مقابلXMC4108F64K64ABXQMA1)
یادداشت‌های طراحی
Use the exact Infineon PG-LQFP-64-19 land pattern and verify the exposed-pad or thermal-pad treatment shown in the package drawing. Keep all 64 positions visible for inspection and rework, place the MCU close to its supply decoupling, and provide a continuous ground reference where routing permits. Do not infer exposed-pad connectivity from the package name alone because the supplied snippets confirm the package but do not provide its pin table.
The verified supply designation is 3.3 V, but the permitted range, sequencing, and per-pin current limits were not supplied. Confirm those values in the manufacturer datasheet and size the regulator for worst-case digital and I/O demand rather than average firmware activity. Place bulk and local ceramic decoupling close to the supply pins, and account for startup current, I/O drive current, and peripheral loading when selecting the power architecture.
Separate sensitive analog routing from fast digital and switching-node paths, even though the verified data does not list the available ADC or timer channels. Maintain short return paths to the ground plane and avoid routing high-current outputs beneath sensitive inputs. Review oscillator, debug, reset, and unused-pin requirements from the exact datasheet; missing or incorrectly terminated unused pins can affect EMC behavior and production repeatability.
Do not substitute an XMC4104 or AB-ordering device solely because the package and flash summary match. Firmware, bootloader support, peripheral availability, flash organization, qualification, and pin multiplexing can differ across ordering options. Create a substitution checklist covering every used pin, peripheral, clock source, memory resource, and qualification requirement, then validate the alternate on representative production hardware before approving it.
اطلاعات انطباق
The verified web results identify an industrial Infineon XMC4000-family microcontroller but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed from the current manufacturer product documentation and applicable regional declarations.