محصولات (46,000+)

XC3090L-8TQG176I - 9000 Gates FPGA, 80 MHz, 176-pin LQFP | Xilinx
XC3090L-8TQG176I

XC3090L-8TQG176I - 9000 Gates FPGA, 80 MHz, 176-pin LQFP | Xilinx

The Xilinx XC3090L-8TQG176I is a CMOS Field Programmable Gate Array from the legacy XC3000L low-voltage family, offering approximately 5000 usable gates (up to 9000 equivalent system gates) implemented across 320 Configurable Logic Blocks (CLBs) in a 176-pin TQG/LQFP package. It supports a maximum clock frequency of 80 MHz with a CLB combinatorial delay of 6.7 ns at the -8 speed grade, targeting high-density glue-logic, prototyping, and industrial control applications where ASIC-class integration is not yet justified. What is an FPGA? A Field-Programmable Gate Array is a reconfigurable digital integrated circuit whose logic fabric and interconnect can be programmed by the end user after manufacture. Within the taxonomy of digital ICs, an FPGA sits between an Application-Specific Integrated Circuit (ASIC) and a microcontroller: an ASIC is hard-wired for one function but offers the lowest unit cost at high volume, while an FPGA trades per-unit cost for design flexibility, parallel hardware execution, and rapid time-to-market. The XC3000 family pioneered SRAM-based configuration and the now-universal island-style CLB + IOB + programmable interconnect architecture that defines the modern FPGA. Key features of the XC3090L-8TQG176I include on-chip SRAM-based configuration store, three types of configurable elements (perimeter I/O Blocks, core CLB array, and routing channels), industrial-grade -40C to +85C operating range (I suffix), and the low-voltage L-suffix core that reduces 5V-family power. The device is housed in a 176-terminal LQFP/TQFP package on a 0.5 mm pitch with gull-wing leads suitable for surface-mount assembly and rework. Technically, the XC3000L family uses a 5V-tolerant I/O structure with 3.3V or 5V core options, hierarchical interconnect including long lines, hex lines, and direct connects, and configurable IOBs that support registered, latched, or combinatorial I/O with tri-state control. The architecture integrates a configuration program store so the array can be re-programmed in-system via the standard Xilinx configuration interface. Typical applications span industrial control systems, telecommunications glue logic, prototyping platforms for ASIC emulation, test and measurement fixtures, military/aerospace subsystems, and educational development kits where students learn HDL synthesis on a mature, well-documented device family. The TQG176 package is the highest-density option for this die. When designing with the XC3090L-8TQG176I, note that this device family is mature (introduced in the early-to-mid 1990s), so verify long-term availability and second-source supply before committing new production designs. New designs should weigh migration to the Xilinx CoolRunner-II CPLD or Spartan-6/Spartan-7 FPGA families for active lifecycle status and modern toolchain support. This page synthesizes distributor pricing, XAIPART in-stock tiers, pin-compatible Xilinx drop-in alternatives drawn from the XC3000L family, and practical design notes on configuration, I/O banking, and legacy toolchain compatibility not found in the original datasheet.

RFQ تماس
XC3090LTM-100PC84C - 6K Gate, 320-Cell FPGA 5V 84-PLCC | Xilinx
XC3090LTM-100PC84C

XC3090LTM-100PC84C - 6K Gate, 320-Cell FPGA 5V 84-PLCC | Xilinx

The Xilinx XC3090LTM-100PC84C is a CMOS Field Programmable Gate Array (FPGA) from the legacy XC3000 Logic Cell Array family, delivering approximately 6,000 usable gates and 320 Configurable Logic Blocks (CLBs) in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. Operating at 5V CMOS technology with a 100 MHz internal performance grade, the device is rated for commercial temperature conditions and targets low-voltage logic integration where fine-grained parallel logic is required. A Field Programmable Gate Array (FPGA) is a type of programmable logic device that combines the density of gate arrays with the design flexibility of in-system programmability. FPGAs sit at the top of the programmable logic hierarchy (PLD -> CPLD -> FPGA -> SoC FPGA) and are widely used to implement custom digital logic, glue logic, bus interfaces, and parallel datapaths without committing to a masked ASIC. The XC3000 family is the third-generation Xilinx architecture that introduced distributed Configurable Logic Blocks with look-up table-based logic, complemented by a programmable interconnect matrix and I/O blocks. Key features of the XC3090LTM-100PC84C include 320 CLBs, a typical gate count range of 5,000 to 6,000 gates, 100 MHz system performance, and 5V CMOS core technology. The PLCC-84 (PC84) package uses J-lead surface-mount terminals in a square ceramic/plastic body, supporting legacy through-hole-style PCB assembly processes. The XC3000 family pioneered SRAM-based configuration, allowing infinite re-programmability via an external configuration PROM or microcontroller bitstream load. From an architecture perspective, the XC3000L family uses 5V-tolerant I/O buffers, distributed RAM capability in select CLB modes, and a hierarchical interconnect that routes signals between logic blocks with predictable delay. The 'LTM' suffix designates the low-voltage / commercial temperature variant in the XC3000 family. Compared with modern 28nm or 16nm FPGAs, the XC3090LTM-100PC84C delivers modest logic density but remains useful for legacy board retrofits, education platforms, and industrial systems where proven long-life silicon is required. Typical applications include industrial control glue logic, legacy telecommunications interfaces, military and aerospace retrofits (through QML equivalents), educational FPGA training platforms, and digital signal preprocessing where low-cost parallel logic suffices. The 84-pin PLCC footprint is socket-compatible with the broader XC3000/XC3100/XC3300 84-pin PLCC family, simplifying board reuse across multiple design generations. When designing with this device, ensure proper configuration circuitry is included - the SRAM-based XC3000 family requires a configuration bitstream at every power-up. Plan for 5V supply decoupling, and verify I/O voltage compatibility with downstream CMOS or TTL peripherals. Engineers targeting new designs should consider the device's NRND/EOL status and confirm lifetime-buy availability for production runs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for engineers evaluating the XC3090LTM-100PC84C for both new designs and legacy support scenarios.

RFQ تماس
XC3090LTM-125PC84C - 5000 Gates XC3000L FPGA, 125MHz, PLCC-84 | Xilinx
XC3090LTM-125PC84C

XC3090LTM-125PC84C - 5000 Gates XC3000L FPGA, 125MHz, PLCC-84 | Xilinx

The Xilinx XC3090LTM-125PC84C is a 5000-gate, 125 MHz Field Programmable Gate Array (FPGA) from the legacy XC3000L Low-Voltage Logic Cell Array family, housed in an 84-pin Plastic Leaded Chip Carrier (PLCC-84) package. It delivers approximately 5000 equivalent gates, 320 Configurable Logic Blocks (CLBs), and 928 flip-flops, with a maximum clock frequency of 125 MHz. The 'L' suffix denotes the low-voltage 3.3 V core variant, and 'TM' indicates the commercial plastic-leaded chip carrier package grade. An FPGA (Field Programmable Gate Array) is a programmable logic device that lets engineers implement arbitrary digital logic functions using an array of configurable logic blocks (CLBs) interconnected by a programmable routing matrix. Within the broader semiconductor taxonomy, an FPGA belongs to programmable logic devices (PLDs), which sit between fixed-function ASICs and discrete logic ICs in flexibility and integration. The XC3000L family was Xilinx's third-generation low-voltage FPGA line, succeeding the original XC3000 by operating from 3.0 V to 3.6 V supplies instead of 5 V, enabling lower power consumption for portable and battery-powered designs of the 1990s. Key features include 320 CLBs, 928 flip-flops, 138 user I/Os, 4.75 V to 5.25 V supply range for the I/O bank, an internal 3.3 V core, and a 125 MHz maximum toggle/clock frequency. The device supports JTAG-based boundary-scan testing, on-chip configuration memory, and tri-state output buffers per I/O. The PLCC-84 through-hole package provides robust mechanical mounting suitable for industrial and legacy equipment designs. Technically, the XC3090LTM-125PC84C uses SRAM-based configuration cells, meaning the bitstream must be loaded from an external ROM or microcontroller at every power-up. This volatile configuration enables unlimited re-programming cycles in the field, but requires a separate configuration PROM such as the XC1736 or compatible serial-loader device. The architecture implements a symmetrical array of CLBs surrounded by perimeter I/O blocks (IOBs), which was the industry-standard FPGA floorplan of that era. Typical applications include industrial control logic, telecom interface glue logic, legacy peripheral adapters, and test-and-measurement custom instrumentation. The wide I/O count (138) supports parallel buses and high-pin-count glue-logic designs. When designing with this FPGA, allocate at least 4 clock-pad pins for global clock distribution and ensure the configuration PROM timing aligns with the XC3090LTM power-on reset sequence. For new designs, consider migrating to a modern Xilinx 7-series or Spartan-6 device, since the XC3000L family is no longer recommended for new designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس
XC3090LTM-8PC84C - XC3000L FPGA, 6K Gates, 84-PLCC | Xilinx
XC3090LTM-8PC84C

XC3090LTM-8PC84C - XC3000L FPGA, 6K Gates, 84-PLCC | Xilinx

The Xilinx XC3090LTM-8PC84C is a member of the legacy XC3000L Low Voltage Logic Cell Array family, delivering approximately 6,000 usable gates in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. The device is built on a 0.8-micron CMOS SRAM-based architecture and operates from a 3.0 V to 3.6 V core supply, with the "L" suffix designating low-voltage operation relative to the original 5 V XC3000 series. The "TM" suffix indicates a specific speed/grade combination within the XC3000L family. A Field Programmable Gate Array (FPGA) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and programmable I/O cells. The user-defined logic function is loaded into on-chip static memory cells from an external boot source such as an EEPROM, EPROM, ROM, or microprocessor. Once configured, the FPGA behaves as a dedicated custom digital circuit. The XC3000 family was Xilinx's pioneering commercial FPGA line, establishing the FPGA architecture still dominant in the industry today, and the XC3000L variant extends that architecture to lower-voltage 3.3 V systems where power dissipation is a primary concern. Key features of the XC3090LTM-8PC84C include approximately 320 Configurable Logic Blocks (CLBs), 64,160 bits of distributed configuration memory, and an 84-pin PLCC package with J-lead surface-mount terminations. The device supports in-system configuration via the Xilinx XC3000 configuration bitstream and is footprint-compatible with other XC3090L members that share the PC84 pinout. Logic delays are typically in the 5-10 ns range, sufficient for moderate-speed glue logic, bus interfacing, state-machine implementation, and small processor prototyping on 3.3 V rails. Typical applications include legacy 3.3 V digital glue logic replacement, prototype ASIC emulation, custom peripheral interfacing for microcontrollers, parallel bus arbitration, and industrial control subsystems where 5 V FPGAs are no longer acceptable. The 84-PLCC package also supports through-hole and socket-based prototyping, which is convenient for engineering development and low-volume production. Designers should note that the XC3000L family is legacy silicon - the Xilinx WebPACK and modern Vivado tools do not support these devices. Programming requires the legacy XACT or older Foundation toolchains, and configuration bitstreams generated for XC4000, Spartan, or 7-series FPGAs are incompatible. Engineers maintaining legacy systems should verify the configuration PROM and toolchain availability before committing to new designs.

RFQ تماس
XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA
XC3S1000-4FG320C

XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA

The AMD XC3S1000-4FG320C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, 221 user I/O, and a 320-FBGA surface-mount package. The -4 speed grade and 1.2 V nominal core supply make it a high-density programmable-logic option for industrial control, telecommunications, instrumentation, and embedded video systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream rather than a fixed circuit mask. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, combines millions of equivalent gates with configurable memory and I/O blocks, and operates as a reconfigurable digital subsystem within a larger embedded system. The Spartan-3 architecture provides 1,920 logic cells organized as configurable logic blocks, along with 442,368 RAM bits for on-chip data storage and distributed memory. Its 221 user I/O support high-speed interface logic, while the 19 x 19 mm 320-FBGA package keeps a one-million-gate design compact. The core operates from 1.14 V to 1.26 V, and the listed operating junction-temperature range is 0°C to 85°C. The -4 ordering code identifies a defined speed grade within the Spartan-3 performance range. A listing for this exact family identifies a 630 MHz performance figure, 90 nm process technology, and 1.2 V core operation. These characteristics suit parallel data capture, protocol bridging, general control logic, and multi-channel digital processing rather than high-throughput processor software workloads. Typical deployments include industrial automation controllers, telecom line-interface equipment, test and measurement instruments, high-speed data-acquisition systems, and embedded displays. Because the device combines substantial logic, dedicated block RAM, and 221 I/O in one package, it can consolidate several discrete logic devices into one configurable implementation while preserving hardware-level timing control. PCB design should account for the BGA escape-routing requirement, power-plane integrity, and the device's substantial dynamic current demand. Use the pin-description table, recommended decoupling network, and package-specific land pattern in the AMD Spartan-3 family documentation. Confirm the configuration interface, bank supply requirements, and unused-ball treatment before releasing the layout for fabrication. This page adds engineering-focused comparison data, drop-in variant guidance, design notes, and application-specific reasoning that are not arranged in the same form in the manufacturer family datasheet. It is intended to help designers confirm package compatibility, resource adequacy, speed grade, and thermal expectations before integrating the FPGA into a new board.

RFQ تماس
XC3S1000-4FG456C - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FG456C

XC3S1000-4FG456C - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 333 user I/Os in a 456-ball FG456 BGA package. It operates with a 1.2 V FPGA core and belongs to the -4 speed grade. The device is listed as obsolete, making it primarily relevant to maintenance, repair, and previously designed embedded systems rather than new-volume production. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic blocks, programmable I/O, and internal routing resources. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family and is used to implement control logic, signal processing, communications, and hardware acceleration. Unlike a fixed-function application-specific integrated circuit, an FPGA permits its configuration bitstream to be changed without changing the PCB. The XC3S1000 provides 17,280 logic cells and 333 user I/Os, making it suitable for designs that need substantially more external connectivity than smaller Spartan devices. Its 456-ball FG456 package also exposes numerous power, configuration, clock, and general-purpose I/O balls. The -4 suffix identifies its factory speed grade, while the C suffix identifies the commercial-grade ordering option. The Spartan-3 architecture integrates programmable logic, dedicated block RAM, dedicated multipliers, digital clock managers, and programmable I/O resources into a single FPGA. This permits a single device to combine parallel datapath processing, control functions, and external interfaces. Engineers can implement multiple finite-state machines, arithmetic pipelines, protocol engines, and peripheral controllers while retaining the flexibility of field-updated configuration bitstreams. Typical uses include industrial control, data-acquisition equipment, communications infrastructure, embedded video processing, and legacy interface adapters. The large 333-I/O count is particularly useful when a design must connect external memories, converters, transceivers, and control peripherals while minimizing external glue logic. A design migrating to a newer FPGA should still be timing-closed and functionally revalidated because device resources and electrical characteristics are not interchangeable merely because the logic function is similar. For implementation, use the Spartan-3 pinout and configuration guidelines in the manufacturer datasheet when assigning the 456 package balls, selecting I/O standards, and planning the power and ground connections. Check the device status before new design release, because an obsolete lifecycle designation means new sourcing and long-term continuity require explicit planning rather than assumption. This page consolidates the available device identification, lifecycle, package, and cross-reference information into an engineering-oriented resource. It also identifies same-footprint speed-grade and temperature-grade alternatives, helping designers distinguish true board-level replacements from parts that require different packages, layouts, or redesigns.

RFQ تماس
XC3S1000-4FG456I - 1M-Gate Spartan-3 FPGA | AMD Xilinx
XC3S1000-4FG456I

XC3S1000-4FG456I - 1M-Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S1000-4FG456I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 333 user I/Os, supplied in a 456-ball FBGA package. The device operates from a 1.2 V core supply, with a specified operating range of 1.14 V to 1.26 V, and is built on a 90 nm FPGA process. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, dedicated input/output resources, and embedded processor capabilities. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, combining substantial logic density with a large pin count and a fine-pitch ball-grid-array footprint for cost-sensitive embedded systems. Key features include 1,920 configurable logic blocks, 432 kbit of embedded memory, a listed maximum clock frequency of 630 MHz, and a listed 333 I/O count. The FG456 designation identifies the 456-ball package, while the -4 speed grade places the device in a performance grade suitable for general-purpose control, processing, and interface logic. The industrial temperature option supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3 architecture uses programmable logic and routing resources to implement digital functions that would otherwise require several conventional ASICs. Its 17,280 logic cells provide substantial parallel processing capability, while the 442,368 RAM bits allow data buffering, lookup tables, packet storage, and embedded-memory designs. With 333 available I/Os, the device can support substantial external connectivity while conserving board area through the 23 mm by 23 mm FBGA package. Typical uses include industrial control systems, network-interface controllers, instrumentation, embedded processor subsystems, video-processing pipelines, and telecommunications equipment. Designers can implement parallel data paths, protocol bridges, and control logic, or combine programmable logic with soft processor cores for system-on-programmable-logic designs. PCB implementation requires careful power delivery and escape routing because the FBGA package exposes fine-pitch balls beneath the device. Follow the manufacturer’s pinout and package-design guidance for ball assignment, power and ground distribution, decoupling, and signal escape. Confirm that the selected speed grade and temperature grade match the operating environment before releasing the production design. This page combines device specifications, package details, sourcing guidance, equivalent-device information, and practical implementation considerations to support faster FPGA selection and board bring-up.

RFQ تماس
XC3S1000-4FG676C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-4FG676C

XC3S1000-4FG676C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-4FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic elements, 391 user I/Os, and a 1.2 V operating supply in a 676-ball BGA package. The -4 suffix identifies its performance grade, while the commercial temperature designation supports designs operating from 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks with programmable routing resources. It replaces many fixed-function gate arrays when design changes, field upgrades, or moderate logic density are required. The XC3S1000 provides 391 user I/Os in a 676-ball package, giving it substantially more interface capacity than smaller Spartan-3 devices. Its 17,280 logic elements provide a practical implementation target for control logic, interface bridging, data acquisition, embedded protocol handling, and general-purpose parallel processing. The 676-ball package also supports a high pin count for designs that need multiple external buses and mixed-speed peripherals. The XC3S1000 belongs to the Spartan-3 generation, whose architecture combines configurable logic blocks, distributed and block RAM, dedicated digital signal processing resources, programmable I/O blocks, and programmable interconnect. The manufacturer documentation identifies the family as the DS099 Spartan-3 FPGA data sheet. The -4 performance grade should be checked against the timing constraints of the selected clock, I/O standard, and logic path. Typical uses include industrial automation, test equipment, communications interfaces, embedded control, video timing, and general digital signal processing. Its 391 I/Os are useful for parallel sensor acquisition, while the logic resources can implement protocol state machines, data pipelines, and control functions. The commercial temperature range makes it appropriate for indoor commercial and industrial equipment when the enclosure temperature remains within 0°C to 85°C. PCB implementation requires careful attention to the 676-ball land pattern, power distribution, decoupling, and high-speed routing. Place power and ground planes according to the manufacturer's pinout and layout guidance, and route clocks, memories, and other high-speed interfaces with controlled impedance and short return paths. Confirm the assembled board against the exact package drawings before releasing fabrication data. This product page organizes the key Spartan-3 device facts, commercially relevant ordering information, pin-compatible replacement options, comparison data, and practical PCB considerations. It is intended to accelerate initial component selection while preserving the need to validate timing, power integrity, thermal performance, and lifecycle requirements for the finished system.

RFQ تماس
XC3S1000-4FG676I - 1M Gate Spartan-3 FPGA | AMD/Xilinx
XC3S1000-4FG676I

XC3S1000-4FG676I - 1M Gate Spartan-3 FPGA | AMD/Xilinx

AMD/Xilinx XC3S1000-4FG676I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 442,368 logic cells, 17,280 slices, and 391 user I/O, packaged in a 676-ball fine-pitch ball grid array. The device operates from a 1.14 V minimum supply, uses 1.2 V core technology, and is built on a 90 nm process. An FPGA is a programmable-logic semiconductor whose configurable logic blocks, programmable input/output blocks, embedded resources, and routing fabric can be configured after manufacture. Within the semiconductor hierarchy, the XC3S1000 belongs to the FPGA and CPLD family, specifically the Spartan-3 low-cost logic-device series. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement multiple digital functions in one device and can be reprogrammed for design revisions, prototypes, and product variations. The principal device characteristics are 630 MHz advertised operating speed, 442,368 logic cells organized into 17,280 slices, 1,000,000 system gates, and 391 user I/O. Its 676-ball FBGA package provides a large, fine-pitch connection interface suitable for systems requiring substantial external connectivity. The -4 speed designation identifies one of the device's supported performance grades, while the I suffix identifies the industrial ordering variant. Spartan-3 devices combine configurable logic with dedicated arithmetic, block RAM, and digital signal processing resources. These resources allow parallel datapaths, embedded memories, state machines, communication interfaces, and control logic to be consolidated into a single programmable component. The architecture is useful when a design must evolve faster than an application-specific ASIC mask set or when field updates are required after deployment. Typical uses include industrial control, communications equipment, instrumentation, embedded test systems, video processing, and general-purpose digital prototyping. The 391 I/O count can support external memory, data converters, network transceivers, clocks, and displays, although a complete design must account for bank-specific supply requirements, dedicated configuration pins, and I/O-standard constraints. PCB implementation requires a fine-pitch 676-ball BGA footprint, careful power and ground distribution, and controlled-impedance routing. Configuration storage, decoupling, clocking, and JTAG access must also be planned according to the Spartan-3 configuration and power-architecture guidance. The large BGA also complicates prototype assembly and inspection. This page organizes the verified electrical, logical, packaging, and sourcing characteristics of the XC3S1000-4FG676I, compares same-footprint Spartan-3 speed and temperature-grade variants, and provides practical guidance for migration, power planning, BGA layout, configuration, and system integration.

RFQ تماس
XC3S1000-4FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-4FT256C

XC3S1000-4FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-4FT256C is a 1 million system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 173 I/O pins, and a 630 MHz device rating. It operates from a 1.2 V core supply and is packaged in a 256-ball FT256 ball-grid-array package. The device is manufactured using 90 nm CMOS technology. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, and signal-processing functions are configured after manufacture. In the product hierarchy, an FPGA belongs to programmable logic, which includes application-specific integrated circuits, complex programmable logic devices, and field-programmable gate arrays. The Spartan-3 architecture combines configurable logic blocks, programmable I/O, block RAM, dedicated multipliers, and clock-management resources to implement control logic, communication interfaces, and embedded signal processing. The XC3S1000-4FT256C provides 17,280 logic cells for designs requiring moderate-to-high logic density. Its 173 I/O positions support connections to external memory, data converters, display interfaces, communications transceivers, and control peripherals. A 630 MHz rating provides a useful basis for timing-constrained clock-domain designs, while the 1.2 V core supply helps reduce switching-related power in systems that require substantial programmable logic. The device uses a 90 nm CMOS process and belongs to the Spartan-3 product family. The FT256 designation identifies the 256-ball package configuration, while the -4 suffix identifies the performance grade. The C suffix denotes the commercial temperature grade. Applications must also account for the package's 1.0 mm ball pitch when defining the PCB land pattern, solder-mask design, assembly process, and inspection requirements. Typical uses include industrial control, communications equipment, embedded instrumentation, video and display processing, data acquisition, and general-purpose digital logic. The FPGA is particularly useful when a design benefits from parallel interfaces, configurable I/O standards, hardware multipliers, block RAM, or logic that can be updated after manufacture. Legacy systems can use the device as a bridge between slower legacy interfaces and higher-speed digital processing logic. PCB implementation should follow the manufacturer package and pinout documentation exactly. Decoupling, configuration-interface access, clock routing, voltage sequencing, and unused balls require careful planning before layout. Because the device is a large BGA, assembly also depends on appropriate PCB stack-up, via-in-pad strategy, solder-mask clearance, and thermal design. This product record combines the manufacturer datasheet information with package-specific engineering guidance, drop-in replacement analysis, comparison parameters, and practical design considerations. It is intended to help engineers evaluate FPGA resource allocation, board compatibility, legacy-product maintenance, and migration planning without relying solely on a distributor parameter table.

RFQ تماس
XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FT256I

XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FT256I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 1,920 logic array blocks, and 173 user I/Os. The device operates from a 1.2 V core supply and has a 630 MHz performance rating. It is packaged in a 256-ball fine-pitch ball grid array designated FT256. A field-programmable gate array, or FPGA, is a programmable digital logic device within the broader semiconductor and configurable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, interface, and signal-processing logic in a reconfigurable device. The Spartan-3 architecture combines logic cells, dedicated block RAM, digital signal processing resources, and programmable I/O within one integrated circuit. The XC3S1000-4FT256I provides 432 kbit of embedded memory according to the manufacturer family documentation. Its -4 speed designation identifies the device performance class, while the I suffix identifies the industrial-temperature ordering option. A 256-ball FTBGA package supports dense PCB routing and is suitable for compact control, communications, instrumentation, and embedded-processing systems where many external signals must terminate on a programmable device. Within the Spartan-3 family, this device provides 173 user I/Os and up to 630 MHz device performance. The programmable architecture permits design changes without changing the PCB, while dedicated block RAM supports buffering, packet storage, and moderate-width data paths. The 1.2 V core operating point reduces core power relative to earlier-generation programmable devices, although total board power still depends on I/O activity, configuration resources, and the selected design. Typical uses include industrial automation, embedded control, data acquisition, communications interfaces, and low-cost digital signal processing. The combination of 17,280 logic elements and 173 I/Os allows one device to consolidate several discrete logic functions. Designs requiring more memory, higher I/O density, or a newer migration path should be evaluated against larger Spartan-3 variants or later AMD FPGA families before PCB release. The FT256 package requires careful power, ground, and signal-integrity planning. Follow the Spartan-3 family datasheet for decoupling, configuration, clocking, and package-ball guidance, and validate every board with the completed design rather than relying only on theoretical resource counts. Confirm that the assembled board, manufacturing process, and operating environment remain compatible with the industrial-grade ordering option.

RFQ تماس
XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FG320C

XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FG320C is a 1-million-system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 221 I/O, and 442,368 bits of block RAM. It operates from a 1.2 V core supply, uses 90 nm FPGA technology, and is packaged in a 320-pin fine-pitch ball grid array for surface mounting. An FPGA is a semiconductor whose digital logic, interconnect, memory, and I/O behavior are configured through a programmable bitstream. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, joining programmable logic devices and field-programmable gate arrays within the broader integrated-circuit and semiconductor categories. This makes it appropriate when a design needs hardware parallelism, reconfigurable interfaces, or dedicated logic rather than a software-controlled processor. The device provides 725 MHz maximum performance and 17,280 configurable logic cells. Its 442,368 bits of block RAM support buffering, data storage, and parallel processing, while 221 I/O pins provide extensive connectivity for external memories, control signals, communications, and mixed-signal interfaces. The 320-FBGA package supports compact, high-density PCB layouts but requires careful escape routing and fine-pitch assembly capability. The XC3S1000 architecture is designed for implementation of parallel data paths, protocol bridges, control logic, embedded memory structures, and general-purpose programmable logic. Performance depends on clocking, routing, resource utilization, and the selected FPGA design. A bitstream generated for the correct device, package, speed grade, and configuration settings is essential for reliable operation. Typical applications include industrial automation controllers, networking and communications equipment, test and measurement systems, embedded video processing, sensor acquisition, and legacy interface conversion. The large I/O count and on-chip RAM make the device useful where several external interfaces and parallel data operations must coexist on one device. Design planning should account for the fine-pitch BGA footprint, power decoupling, clock jitter, I/O standards, configuration memory, and thermal performance. PCB signal-integrity analysis is particularly important for high-speed interfaces, while careful bank and voltage planning prevents incompatible I/O standards from being assigned to the same power domain. This page combines the device specifications with application guidance, engineering design notes, and pin-compatible Spartan-3 alternatives. It also highlights where speed grade, temperature grade, and device revision choices affect replacement decisions without overlooking the constraints of an existing 320-ball PCB layout.

RFQ تماس
XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD
XC3S1000-5FG456C

XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD

The AMD XC3S1000-5FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 333 I/O interfaces, and a 1.2 V supply in a 456-ball FBGA package. It is a 90 nm programmable logic device built for cost-sensitive embedded systems requiring substantial logic, memory, and parallel I/O capacity. The -5 speed grade and FG456 package identify this configuration as the commercial-temperature, 456-ball member of the Spartan-3 family. An FPGA is a programmable semiconductor whose internal logic, routing, and I/O resources are configured after manufacture. Within the product hierarchy, this device is a field-programmable gate array, part of the broader class of programmable logic devices and integrated circuits. This architecture allows one board design to support multiple hardware functions, shorten development cycles, and support field upgrades through a programmable configuration bitstream. The XC3S1000-5FG456C provides 17,280 logic elements distributed across 1,920 configurable logic blocks, with 7,680 adaptive logic modules and 432 embedded-memory bits identified for this device. Its 333 user I/O interfaces support communication with external processors, memory, converters, and industrial peripherals. A listed maximum clock frequency of 725 MHz describes a headline device capability; actual system performance still depends on the selected design, speed grade, clocking scheme, and timing constraints. The device uses a low 1.2 V operating supply and 90 nm process technology. These characteristics place it in the Spartan-3 generation, which combined a large gate count with a cost-oriented architecture for volume embedded applications. Its ball-grid package concentrates a high pin count into a compact 23 mm by 23 mm square footprint while supporting a 1.00 mm terminal pitch. Typical applications include industrial control, data acquisition, communications infrastructure, embedded instrumentation, video processing, and legacy platform control. The large I/O count is especially useful when a design must bridge multiple buses, capture parallel sensor data, or connect directly to high-speed external logic without requiring another programmable device. For a new PCB layout, use the manufacturer pinout and package-mechanical guidance for the exact FG456 ball map. Existing designs should be checked for voltage, temperature, timing, configuration-interface, and pinout compatibility before substituting any speed- or temperature-grade variant. Configuration storage, clocking, decoupling, and signal-integrity requirements must also follow the Spartan-3 design guidance.

RFQ تماس
XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD
XC3S1000-5FG676C

XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD

AMD XC3S1000-5FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 391 user I/Os, packaged in a 676-ball fine-pitch BGA. It operates from a 1.2 V core supply and is manufactured using 90 nm CMOS technology. The device combines programmable logic, dedicated block RAM, and a broad user-I/O interface in a 27 mm by 27 mm surface-mount package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and interconnect resources are configured after manufacture. In the broader hierarchy, an FPGA belongs to programmable logic devices, alongside complex programmable logic devices, and operates as a configurable element within an embedded control or signal-processing system. This flexibility allows one physical device to implement multiple hardware functions and supports product revisions without changing the printed circuit board. The Spartan-3 architecture provides 442,368 total RAM bits alongside 17,280 logic cells. Its 391 user I/Os support integration with external memory, converters, clocks, communications links, and control peripherals. The -5 speed designation identifies the device's performance grade, while the C suffix denotes the commercial temperature grade associated with an operating range of 0°C to 85°C. The 676-ball FBGA package supports dense board routing while requiring careful escape routing and multilayer PCB construction. Technical complexity increases with the number of available logic and I/O resources. Designers must account for clock-domain constraints, supported I/O standards, memory bandwidth, pin placement, and the finite routing capacity of the selected FPGA. Configuration data controls the implemented circuit, so the bitstream, configuration interface, clock source, startup behavior, and reset strategy should be validated as one complete design rather than treated as isolated device features. Typical uses include industrial automation, communications equipment, embedded video control, test and measurement, and general-purpose digital signal processing. In an industrial controller, the FPGA can combine parallel interface logic, protocol conversion, and deterministic sampling in one device. In communications equipment, the same programmable fabric can adapt to different framing and signaling requirements while providing 442,368 RAM bits for buffering or packet processing. PCB implementation is the principal practical consideration for this 676-ball package. Use a board stackup that supports the required escape-routing density, place decoupling close to every supply ball, and follow the manufacturer's ball-map and layout guidance for power, ground, and configuration pins. Confirm the selected footprint and pin assignments against the package drawing before releasing the design. This product page combines the device specifications, same-footprint replacement options, engineering guidance, application fit, and package-related constraints into a practical engineering reference. It also distinguishes exact published attributes from parameters that still require confirmation before schematic or PCB sign-off.

RFQ تماس
XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FT256C

XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FT256C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 173 user I/O in a 256-ball FTFBGA package. Its core supply operates from 1.14 V to 1.26 V, while the -5 speed designation identifies the device’s performance grade. A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O paths are configured after fabrication. The Spartan-3 FPGA family occupies the hierarchy FPGA, programmable logic device, configurable logic, and semiconductor. This makes the XC3S1000-5FT256C suitable for designs requiring parallel logic, embedded block RAM, programmable interfaces, and field-updatable configurations. Key features include 17,280 logic cells, 442,368 total RAM bits, 1,000,000 system gates, and 173 user I/O. The -5 suffix denotes a specific speed grade, while the FT256C package designation identifies a 256-ball fine-pitch plastic ball-grid-array configuration. These resources support concurrent control logic, data buffering, interface bridging, and protocol-specific state machines without relying on multiple discrete programmable devices. The device is based on the Spartan-3 FPGA architecture and provides 1,920 slices as reported by the product listing. Distributed RAM and dedicated block RAM make it useful for small embedded memories, data pipelines, lookup tables, and temporary packet storage. Its 173 available I/O provide broad connectivity for external memory, clocks, serial links, and control signals, although each interface must still be assigned within the device’s supported electrical and timing constraints. Typical uses include industrial control, telecommunications equipment, data-acquisition systems, embedded instrumentation, and legacy network-interface designs. Its 1M-gate architecture can consolidate parallel control and datapath functions into one package, while the substantial I/O count supports board-level integration with processors, memory devices, transceivers, and custom interface logic. Design planning must account for the FTFBGA package’s fine pitch, differential-pair routing, via-in-pad and solder-mask requirements, and the very large exposed BGA footprint. Signal integrity, decoupling, configuration-memory implementation, and bank-specific I/O constraints should be reviewed against the manufacturer’s Spartan-3 design guidance before schematic or layout signoff. This product record combines the exact XC3S1000-5FT256C package and resource details with practical implementation guidance, speed-grade alternatives, and parameter-by-parameter comparison information. It is intended to help engineers identify a configuration-compatible Spartan-3 option and plan the PCB, toolchain, and interface requirements for a maintainable FPGA platform.

RFQ تماس
XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx
XC3S100E-4TQ144I

XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx

The Xilinx XC3S100E-4TQ144I is a Spartan-3E field-programmable gate array with 2,160 logic cells, 240 logic blocks, 73,728 RAM bits, and 108 user I/O pins. It operates from a nominal 1.2 V core supply, supports a 1.14 V to 1.26 V voltage range, and is packaged in a 144-pin TQFP. The -4 speed grade supports operation up to 572 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The XC3S100E belongs to the Spartan-3E FPGA family, which sits within the broader hierarchy of FPGA, programmable logic, digital semiconductor, and embedded-electronics components. This makes it suitable for designs requiring parallel logic, control, data acquisition, interface bridging, or programmable signal processing. The device provides 50,000 system gates and 2,160 logic cells, providing a practical capacity for control logic, protocol interfaces, state machines, and small embedded signal-processing functions. Its 73,728 RAM bits can support data buffering, packet storage, lookup tables, and configuration or working memory. The 108 user I/O pins give a system designer substantial connectivity for buses, counters, serial links, and external data acquisition devices. The XC3S100E-4TQ144I uses a 1.2 V CMOS core and is specified for an industrial temperature range of -40°C to +100°C. The -4 designation identifies its performance grade, while the 144-pin TQFP package provides a conventional leaded surface-mount format with exposed thermal and thermal-pad considerations that must be handled according to the package drawing. Its 90 nm Spartan-3E process generation emphasizes low-cost programmable logic rather than the very high performance of larger modern FPGA families. Typical applications include industrial control and automation, data-acquisition front ends, communications protocol converters, embedded test equipment, instrumentation, and compact embedded-processing subsystems. The device can implement parallel-to-serial conversion, FIFO-based data movement, state-machine control, and custom peripheral functions while allowing firmware or logic revisions without changing the PCB. When assigning this FPGA, verify the exact pin assignments, bank supply requirements, configuration interface, clock topology, and I/O standards against the Spartan-3E family data sheet. The industrial temperature grade makes the part appropriate for temperature-challenged equipment, but the legacy 90 nm process and 2,160-cell limit should be considered against system timing, memory, and current design requirements. This product record combines manufacturer-family technical data with practical distinctions between temperature-grade, lead-free, and extended-temperature ordering variants. It also documents drop-in footprint considerations, configuration and design guidance, and application-specific fit so engineers can evaluate the XC3S100E-4TQ144I against other 144-pin Spartan-3E devices before committing to a design.

RFQ تماس
XC3S100E-4TQG144I - 100K Gate Spartan-3E FPGA | AMD
XC3S100E-4TQG144I

XC3S100E-4TQG144I - 100K Gate Spartan-3E FPGA | AMD

AMD XC3S100E-4TQG144I is a Spartan-3E field-programmable gate array with 100,000 system gates, 2,160 logic cells, 108 user I/Os, and a maximum clock frequency of 572 MHz, housed in a 144-pin TQFP package. It uses 90 nm CMOS technology and operates from a 1.2 V core supply, combining programmable digital logic with 240 configurable logic blocks. A field-programmable gate array, or FPGA, is a semiconductor whose digital functions are defined after fabrication through a configuration bitstream. Within the product hierarchy, the XC3S100E belongs to the Spartan-3E FPGA family and implements configurable logic blocks, programmable I/O, embedded memory, dedicated multipliers, and clock-management resources. This makes it more flexible than a fixed-function application-specific integrated circuit while offering a different performance, power, and software-development profile from a microcontroller. Key features include 240 configurable logic blocks, 2,160 logic cells, 108 user I/O pins, and up to 100,000 equivalent system gates. The maximum listed clock frequency is 572 MHz, while the 90 nm CMOS process supports integration of programmable logic and dedicated fixed resources on one device. The TQFP-144 package provides 144 physical leads with a 0.5 mm terminal pitch and occupies a 22 mm by 22 mm footprint. The device is designed for parallel digital datapaths, control logic, protocol bridging, signal processing, and general embedded system control. Its resources can be combined in parallel to create wide data paths, while dedicated digital clock managers support controlled clock distribution and phase management. The 108 user I/O pins are distributed through the package, allowing external memory, converters, communication transceivers, and custom interfaces to be connected without requiring a separate large-format programmable device. Typical uses include industrial control, data-acquisition systems, instrumentation, communications equipment, embedded video processing, and legacy digital platforms that require configurable hardware. Designers can implement parallel ADC or DAC interfaces, packet-processing functions, custom peripheral controllers, and mixed logic functions in one FPGA. The 144-lead TQFP package is also practical for boards where a leaded component simplifies inspection, repair, or manual assembly compared with a very fine-pitch BGA. For a new PCB, use the manufacturer pin table and package drawing to assign power, ground, configuration, clock, and user-I/O connections. Place bypass capacitors close to the supply pins, route configuration signals away from high-speed nets, and keep every clock and data trace properly terminated. Because the TQFP has exposed leads on all four sides, confirm connector clearance and solder-assembly access around the 22 mm by 22 mm body. This product page combines the key device specifications, verified family documentation, practical integration guidance, and clearly identified same-footprint alternatives. It also distinguishes the industrial-temperature suffix and lead-free package options so engineers can assess replacement suitability without assuming that every similarly named Spartan-3E ordering code has identical environmental or procurement requirements.

RFQ تماس
XC3S100E-4VQG100C - 2160 Logic Cell FPGA | Xilinx
XC3S100E-4VQG100C

XC3S100E-4VQG100C - 2160 Logic Cell FPGA | Xilinx

The Xilinx XC3S100E-4VQG100C is a Spartan-3E field-programmable gate array with 2,160 logic cells, 100,000 system gates, 66 user I/Os, and a 1.2 V core supply in a 100-pin VQFP package. The -4 speed grade supports demanding control and signal-processing designs, while the commercial C suffix identifies an operating-temperature range of 0°C to +85°C. It combines programmable logic, dedicated digital signal processing resources, and block memory in one reconfigurable semiconductor device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. In the device hierarchy, an FPGA is a programmable logic device and therefore a more flexible relative of fixed-function logic ICs. Where an application requires parallel control, interface adaptation, protocol conversion, or signal processing, an FPGA can implement multiple digital functions in parallel while allowing field upgrades through a programmable configuration bitstream. The XC3S100E provides 2,160 logic cells and 100,000 equivalent system gates, with 66 I/O pins for connections to external components. Its 1.2 V nominal core supply is specified by listings as a 1.14 V to 1.26 V operating range. A listed maximum clock frequency of 572 MHz applies to the associated 100-pin Spartan-3E device family. These resources are suitable for medium-density embedded control, bus-interface bridging, protocol conversion, data acquisition, and industrial automation logic. The XC3S100E belongs to the Spartan-3E architecture, which combines configurable logic blocks, dedicated multipliers, block RAM, and general-purpose I/O in a low-cost FPGA platform. The -4 designation identifies the device speed grade, while VQG100 identifies the 100-pin very-thin quad-flat-pack configuration and C identifies commercial temperature grade. Because configuration determines the implemented logic, designers must match the bitstream, pin constraints, supported device family, and package to the exact device identifier before programming. Typical uses include industrial control modules, custom peripheral interfaces, communications protocol bridges, motor-control support logic, test equipment, and embedded data-acquisition systems. Its 66 I/Os are useful for parallel digital interfaces, while programmable logic can implement state machines, arbitration, framing logic, and data-format conversion. The 100-pin surface-mount package also supports compact controller boards without requiring the larger ball-grid packages used by higher-capacity devices. PCB design should preserve the manufacturer's recommended power, decoupling, configuration, clock, and I/O layout. Place the core and I/O supply decoupling capacitors close to their associated pins, route configuration signals away from fast switching nodes, and assign pins according to the package-specific constraints and bank voltage rules. Confirm the selected device and bitstream with programming tools before production release because speed and temperature suffixes are not interchangeable in every system qualification context. This page combines device specifications, application guidance, pin-compatible alternatives, comparison parameters, and practical FPGA design notes. The recommended alternatives retain the 100-pin package while distinguishing commercial, industrial, faster-speed, and higher-capacity configurations for easier replacement planning.

RFQ تماس
XC3S100E-5TQ144C - Spartan-3E 100K FPGA | AMD
XC3S100E-5TQ144C

XC3S100E-5TQ144C - Spartan-3E 100K FPGA | AMD

The AMD XC3S100E-5TQ144C is a Spartan-3E field-programmable gate array with 2,160 logic cells, 108 user I/O pins, and 73,728 RAM bits in a 144-pin TQFP package. The -5 speed grade operates with a 1.14 V to 1.26 V core supply and is positioned for designs requiring up to 657 MHz device performance. A field-programmable gate array is a configurable digital semiconductor whose logic, memory, and I/O can be programmed after fabrication. The FPGA hierarchy extends from configurable logic blocks and look-up tables through the Spartan-3E family to the broader FPGA and programmable-logic-device categories. This flexibility allows one physical package to support multiple interfaces, control functions, and signal-processing implementations. Key device resources include 2,160 logic cells, 240 logic array blocks, 108 user I/O pins, and 73,728 RAM bits. The 144-lead surface-mount package provides substantially more I/O than the smaller Spartan-3E package options. The listed operating temperature range of 0°C to 85°C suits commercial equipment, while the C designation identifies the commercial product grade. The Spartan-3E architecture combines programmable logic, dedicated block RAM, and configurable I/O in a single CMOS device. Its 90 nm CMOS implementation is identified in the manufacturer-family documentation, while the -5 suffix denotes the performance grade used in the ordering code. Engineers should distinguish the device's maximum characterized clock frequency from the frequency actually achievable by a specific design, because routing, timing constraints, logic utilization, and I/O requirements determine the final operating point. Typical uses include industrial control, embedded instrumentation, communication interfaces, digital signal conditioning, and compact embedded systems. The 108 available user I/O positions are especially useful for parallel buses, status and control signals, counters, and multi-channel acquisition systems. The 73,728 RAM bits also permit local buffering, packet storage, counters, and small state-machine implementations without depending entirely on external memory. A critical design consideration is the limited I/O voltage relationship of this legacy FPGA family. Confirm the bank-specific supply requirements, decoupling, clock topology, configuration source, and termination network against the Spartan-3E datasheet before layout release. A 144-pin TQFP also demands careful escape routing between its 0.5 mm pitch leads, so a stable multilayer stack-up and adequate ground-plane continuity are important. This product page combines verified device parameters, same-package replacement options, application guidance, and design-focused comparison information. It also highlights which characteristics are confirmed for the exact XC3S100E-5TQ144C ordering code and which engineering details must be checked in the Spartan-3E documentation before a new board is released.

RFQ تماس
XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG320C

XC3S1500-4FG320C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG320C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 total cells, a maximum clock frequency of 630 MHz, and a 1.2 V nominal supply in a 320-pin flip-chip ball grid array package. The device provides 221 user I/O pins for programmable digital logic, control, signal processing, and communication functions. A field-programmable gate array is a semiconductor IC whose digital behavior is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated I/O, and clocking resources. The Spartan-3 family occupies the FPGA and CPLD segment of the broader semiconductor market and is intended for designs requiring substantial parallel processing without the cost of application-specific integrated circuit development. The XC3S1500-4FG320C offers a 1.2 V core supply, a permitted supply range of 1.14 V to 1.26 V, and 90 nm CMOS process technology. Its 29,952 cells provide substantially more logic capacity than smaller CPLDs, while 221 I/O pins support interfaces to memory, converters, transceivers, and control peripherals. The -4 speed designation is associated with a maximum clock frequency of 630 MHz in the device listing. Programmable logic in the Spartan-3 architecture can implement parallel datapaths, state machines, protocol bridges, and fixed-function accelerators. Dedicated memory and I/O resources allow multiple data paths to operate concurrently, while clock-management features support deterministic internal timing. Exact RAM quantities, supported I/O standards, configuration interfaces, and pin functions must be confirmed in the AMD Spartan-3 family data sheet before final board design. Typical uses include industrial automation and machine vision, embedded communications, video and image processing, data acquisition, networking equipment, and cost-sensitive digital control. The XC3S1500-4FG320C is particularly appropriate when a design needs substantially more parallelism than a small CPLD but does not require the resources or power envelope of a larger high-end FPGA. PCB planning must account for the dense 320-ball FBGA footprint, controlled-impedance routing, decoupling near the core and I/O supplies, and proper configuration-memory interface layout. Designers should follow the AMD package pinout and recommended-layout guidance, validate signal integrity across every implemented I/O standard, and confirm thermal performance at the highest expected junction temperature. This product record combines the core electrical, logic-capacity, packaging, and environmental characteristics with practical selection guidance, application context, and package-aware alternatives. It also highlights the distinction between the commercial-grade -4FG320C device and related lower-power or extended-temperature family members.

RFQ تماس
XC3S1500-4FG320I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG320I

XC3S1500-4FG320I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG320I is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 3,328 configurable logic blocks and 221 I/O sites in a 320-ball BGA package. It operates from a 1.2 V core supply and is ordered with the -4 speed grade and industrial temperature designation. The XC3S1500-4FG320I provides the logic capacity and pin count required for embedded control, parallel processing, communications, industrial automation and test-equipment designs. A field-programmable gate array, or FPGA, is a programmable digital semiconductor in which configurable logic blocks and programmable interconnect resources implement a designer's circuit after manufacture. In the product hierarchy, an FPGA is a programmable logic device, a semiconductor and an integrated circuit. Unlike a fixed-function ASIC, an FPGA permits design revisions, parallel logic implementation and system adaptation without fabricating a new custom silicon mask set. The 3,328 configurable logic blocks provide the physical foundation for combinational and sequential logic in the Spartan-3 architecture. Its 1.5 million system-gate figure describes the device's broad logic capacity, while 221 I/O sites support connections to external memory, data converters, communications transceivers and control peripherals. The 320-ball BGA package offers dense board-level connectivity for complex systems with numerous high-speed and parallel signals. The -4 portion of the ordering code identifies a specific performance grade, while the I suffix identifies the industrial temperature option. These suffixes are functionally important when replacing or upgrading an FPGA: the package, speed grade, temperature range and power configuration must all be checked against the original design. The Spartan-3 generation is established for programmable embedded systems and remains recognizable through its combination of substantial gate count, dedicated block RAM resources and configurable digital interfaces. Typical uses include industrial automation controllers, data-acquisition systems, communications infrastructure, embedded video and control platforms, and test-and-measurement instruments. The 221 available I/O sites are especially useful where the design must bridge multiple buses, retain parallel data paths or connect external memories and converters while retaining the flexibility of programmable logic. PCB implementation should prioritize the manufacturer's pinout and ball-assignment tables, power-decoupling recommendations and high-speed layout guidance. A 320-ball BGA demands careful escape routing, continuous power planes, via-in-pad or fanout-compatible construction, and adequate thermal spreading beneath the device. Verify the programmed bitstream against the exact device identifier and package before production programming. This product page combines the core device identifiers, package information, design guidance, commercial sourcing answers and qualified drop-in alternatives into one engineering-focused reference. It also distinguishes same-family replacements by speed grade, temperature designation and package configuration so engineers can identify the exact migration path for an existing Spartan-3 design.

RFQ تماس
XC3S1500-4FG456C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG456C

XC3S1500-4FG456C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD Xilinx XC3S1500-4FG456C is a discontinued Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, 333 user I/Os, and a 1.2 V core supply. It is packaged in a 456-ball plastic FBGA measuring 23 × 23 mm and is specified for commercial-temperature operation. The -4 designation identifies its performance speed grade. A field-programmable gate array is a programmable logic device in which digital functions are configured through programmable interconnect and logic resources. The Spartan-3 FPGA family sits within the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, block RAM, dedicated input/output resources, and programmable interconnect in a single CMOS package. This architecture supports parallel signal processing, control, interface bridging, and embedded-system logic without requiring a custom ASIC. The XC3S1500-4FG456C provides 29,952 logic cells and a listed system-gate count of 1,500,000. Its 576 Kb of block RAM supports buffering, packet storage, data acquisition, and general-purpose on-chip memory. A maximum operating frequency of 630 MHz is listed for the device, while 333 user I/Os provide substantial connectivity for external memory, buses, clocks, control signals, and high-speed interfaces. The device uses 90 nm CMOS fabrication and a nominal 1.2 V core supply. Its 456-ball FBGA places hundreds of contacts beneath the device, supporting dense PCB routing and high I/O availability. The commercial version operates from 0 °C to 85 °C at the junction, making it relevant to cost-sensitive commercial equipment that does not require the broader industrial-temperature qualification associated with related suffix variants. Typical uses include industrial control systems, communications equipment, video-processing modules, embedded instruments, and consumer products requiring high logic density in a compact package. Its large I/O count is particularly useful for parallel interfaces, while block RAM can retain sampled data or packet payloads. Designs must account for the legacy Spartan-3 toolchain, configuration requirements, and the availability of newer programmable-logic devices. PCB implementation requires careful ball-grid-array layout, controlled impedance routing, multiple power rails, decoupling, and a configuration source compatible with the Spartan-3 architecture. Because this exact MPN has been discontinued, long-lived or safety-related products should confirm supply continuity and consider a pin-compatible Spartan-3L option when its electrical and configuration characteristics are acceptable. This page combines the exact XC3S1500-4FG456C ordering characteristics, package and lifecycle information, structured comparisons with pin-compatible alternatives, and practical migration guidance. It also identifies the engineering limits that matter when reusing an existing 456-ball PCB or transferring a design to a newer FPGA family.

RFQ تماس
XC3S1500-4FG456I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG456I

XC3S1500-4FG456I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG456I is a Spartan-3 field-programmable gate array with 29,952 logic cells, approximately 1.5 million system gates, 333 I/O sites, and a 1.2 V core supply in a 456-pin FBGA package. It is configured for industrial-temperature operation and combines programmable logic, block RAM, dedicated multipliers, and programmable I/O in one reconfigurable semiconductor. A field-programmable gate array is a digital integrated circuit whose logic, interconnect, memory, and peripheral functions can be programmed after manufacture. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and below an ASIC when development flexibility, field updates, and configurable parallel processing are more important than maximum unit cost or lowest power consumption. The Spartan-3 family targets general-purpose embedded logic, control, communication, and signal-processing systems. The XC3S1500 provides 29,952 logic cells, approximately 1.5 million equivalent system gates, 576 Kb of block RAM, and up to 333 user I/O. Its listed operating performance reaches 630 MHz, while its 1.2 V core voltage is suitable for modern FPGA board power architectures. The -4 suffix identifies the performance grade, FG456 identifies the 456-ball package, and the final I suffix denotes the industrial temperature option. Internally, the device is organized around configurable logic and interconnect resources rather than a fixed processor pipeline. Parallel modules can execute control, filtering, protocol, or arithmetic functions simultaneously, allowing one FPGA to consolidate several discrete logic devices. Block RAM supports buffering and data storage without consuming large amounts of LUT-based logic, while dedicated multipliers accelerate selected arithmetic operations. This architecture favors flexible parallel datapaths over sequential general-purpose processing. Typical uses include industrial control and automation, embedded communications, data acquisition, test equipment, video and image processing, network interface controllers, and embedded systems requiring parallel hardware acceleration. A design can assign interfaces and control functions to programmable I/O, use dedicated RAM for frame or packet buffering, and implement filters or protocol engines in parallel logic. The Spartan-3 architecture also supports field configuration updates when the system architecture permits controlled reconfiguration. The primary PCB constraint is the 456-ball FBGA footprint, whose fine pitch, dense escape routing, and via requirements need careful stack-up and signal-integrity planning. Use the manufacturer pinout, differential-pair rules, and decoupling guidance when assigning pins and laying out power, ground, clock, and high-speed interfaces. Legacy tools and device support should also be checked before beginning a new design because the Spartan-3 generation predates current FPGA families. This product record combines the exact device identity, package and logic-resource details, verified cross-reference candidates, and practical design guidance. It supports faster component identification while preserving the distinction between a genuine pin-compatible replacement and a device that merely belongs to the broader Spartan-3 family.

RFQ تماس
XC3S1500-4FG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG676C

XC3S1500-4FG676C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 487 I/O, and a 1.2 V core operating voltage, supplied in a 676-ball BGA package. It is designed for applications requiring substantial configurable logic resources, parallel digital interfaces, and deterministic programmable behavior. The FPGA combines programmable logic, block RAM, dedicated DSP resources, and programmable I/O within one integrated device. A field-programmable gate array is a semiconductor device whose digital circuit is defined after manufacture. The FPGA category sits between fixed-function application-specific integrated circuits and software-programmable processors. Unlike an ASIC, it allows logic, interfaces, and signal-processing functions to be revised without changing the PCB. The Spartan-3 FPGA family targets cost-sensitive embedded, communications, industrial, and test applications where reconfigurability and integration are more important than the absolute performance of the largest programmable-logic devices. The XC3S1500-4FG676C provides 1,500,000 system gates and 487 I/O in a compact 676-ball BGA. Its 1.2 V core voltage identifies it as a modern FPGA architecture relative to older, higher-voltage programmable devices. The -4 speed designation indicates the device's performance grade, while the commercial -C suffix identifies its intended temperature and product grade. Because the BGA package contains 676 terminals, its PCB layout, assembly process, and inspection requirements require more advanced manufacturing support than a leaded or small-outline package. Spartan-3 devices support parallel logic implementation, high-speed I/O, internal block memory, and dedicated arithmetic resources for DSP-oriented signal processing. These characteristics make the family suitable for embedded control, data acquisition, communications gateways, industrial monitoring, video processing, and instrument-control systems. Designers should map the required clocking, memory, serial links, and I/O standards before selecting the package, because unused balls do not automatically become available for additional interfaces. Typical deployments include industrial sensor aggregation, data-acquisition front ends, network protocol conversion, embedded video pipelines, and digital test equipment. The large I/O count can reduce the need for external interface expanders in parallel architectures, while the high logic density allows multiple digital functions to be consolidated into one programmable device. The principal design consideration is BGA implementation. Use the manufacturer's pinout, recommended power planes, decoupling arrangement, and PCB stack-up guidance, and verify assembly capability with the fabricator before release. Configuration storage, clocking, JTAG access, and I/O voltage planning must also be addressed early because these requirements can affect the supporting circuitry and board-level test strategy. This product page combines the verified device identity, package information, search-query language, pin-compatible family options, and practical design guidance into one engineering-oriented reference. It is intended to help designers locate the correct datasheet, assess a drop-in replacement, plan the BGA layout, and select the most suitable Spartan-3 device without relying on vague family-level descriptions.

RFQ تماس