محصولات (46,000+)

XC3S1500-4FG676I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FG676I

XC3S1500-4FG676I - 1.5M Gate Spartan-3 FPGA | AMD

AMD XC3S1500-4FG676I is a Spartan-3 field-programmable gate array with 1.5 million system gates, 29,952 logic cells, up to 487 user I/O, and a 1.2 V supply in a 676-pin BGA package. The -4 speed designation corresponds to the listed 630 MHz performance, while the I suffix identifies the industrial-temperature ordering option. A field-programmable gate array, or FPGA, is a programmable digital semiconductor used to implement control logic, signal processing, interface bridging, and embedded systems through a configurable logic and interconnect fabric. FPGAs occupy the programmable-logic portion of the integrated-circuit hierarchy and can shorten development cycles by replacing application-specific gate arrays with reconfigurable devices. The Spartan-3 architecture provides 29,952 configurable logic cells and 487 user I/O in this 676-BGA configuration. Its 1.2 V core supply and 630 MHz listed performance make it useful for demanding parallel data paths, protocol handling, instrumentation, communications, and embedded control. The package offers substantial pin and routing capacity compared with smaller FPGA packages. The XC3S1500 combines programmable logic cells, programmable I/O blocks, dedicated memory resources, internal clocking, and configurable interconnect within one device. This architecture permits parallel datapaths and deterministic control logic to coexist on the same FPGA, reducing external component count compared with a design assembled from separate logic devices. Typical uses include industrial automation, communication equipment, test and measurement, video or image processing, embedded storage systems, and high-performance controller prototypes. Designers can also use it to consolidate several fixed-function logic functions into one reconfigurable device while preserving software or configuration-based field updates. PCB implementation requires careful BGA-layout practices, including the manufacturer-recommended land pattern, multilayer board construction, controlled-impedance routing, complete power and ground planes, and decoupling close to supply pins. Configuration memory, clocking, JTAG access, I/O standards, and bank-specific voltage requirements must be planned before schematic capture. This product page combines the listed device specifications, a focused package-aware comparison, practical design guidance, and ordering information for engineers evaluating the XC3S1500-4FG676I for programmable-logic designs.

RFQ تماس
XC3S1500-4FGG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FGG676C

XC3S1500-4FGG676C - 1.5M Gate Spartan-3 FPGA | AMD

AMD XC3S1500-4FGG676C is a Spartan-3 field-programmable gate array with 1.5 million system gates, 29,952 configurable logic cells, 487 I/O, and a 1.2 V core supply in a 676-ball FBGA package. The -4 designation identifies its performance grade, while the C suffix denotes the commercial temperature option. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, while its parallel configurable cells and programmable routing make it suitable for substantially more complex logic than a basic programmable device. The Spartan-3 family combines logic resources, block RAM, dedicated multipliers, and programmable I/O for embedded control, communications, industrial automation, and signal-processing systems. Key characteristics include 1.5 million system gates, 29,952 logic cells, 487 I/O, a nominal 1.2 V core voltage, and operation from 0°C to 85°C. The FGG676 package provides 676 ball-grid-array contacts in a square surface-mount footprint. Device listings also identify a 630 MHz performance figure and 90 nm fabrication technology, making this part a high-density, cost-optimized member of the Spartan-3 product family. The XC3S1500 architecture supports parallel processing through its large logic fabric and dedicated resources. Its 487 I/O provide substantial connectivity for external memories, communication transceivers, data converters, and general-purpose digital interfaces. The -4 speed grade targets designs requiring a specific performance class, while the commercial temperature range makes the device appropriate for equipment operating in controlled indoor or industrial environments without extended-temperature requirements. Typical uses include industrial control systems, network-interface equipment, video processing, instrumentation, communications infrastructure, and embedded signal-processing platforms. Its high pin count is especially useful when a design must connect multiple buses, external memories, high-speed interfaces, and control logic without requiring a larger package. The principal design trade-off is board complexity. A 676-ball FBGA demands fine-pitch assembly, careful via and escape-routing planning, and PCB layer-count evaluation. Designers should use the manufacturer package drawings and pinout information to define land patterns, power planes, decoupling, and manufacturing rules before releasing a layout. This product page combines exact catalog parameters, lifecycle information, sourcing guidance, package considerations, and same-footprint alternatives. It also highlights where speed, temperature grade, and package choice affect substitution decisions, helping engineers distinguish a true drop-in option from a merely similar Spartan-3 device.

RFQ تماس
XC3S1500-4FGG676I - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-4FGG676I

XC3S1500-4FGG676I - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-4FGG676I is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, a -4 performance grade, and a 1.2 V supply in a 676-ball FBGA package. It combines programmable logic, block RAM, dedicated digital signal processing resources, and configurable I/O in a single monolithic device. The Spartan-3 architecture supports parallel signal processing, control, interface, and embedded-system functions without relying on a fixed logic configuration. An FPGA is a programmable logic semiconductor whose interconnect and functional blocks are configured after manufacture. Within the product hierarchy, an FPGA is a user-programmable digital integrated circuit that can implement combinational and sequential logic, arithmetic, memory, and parallel data-processing pipelines. The Spartan-3 family combines a 90 nm fabrication process with configurable logic and dedicated resources, placing it between fixed-function ASICs and more complex programmable-logic devices. The XC3S1500-4FGG676I provides 29,952 logic cells, 1,500,000 system gates, and a maximum stated operating frequency of 630 MHz. Its 1.2 V core supply and 676-pin FBGA package support dense, high-pin-count industrial and embedded designs. The -4 code identifies the device performance grade, while the I suffix identifies the temperature-grade option used in the exact ordering code. Spartan-3 devices use configurable logic blocks connected by programmable routing resources. Dedicated block RAM permits efficient data buffering, while DSP resources support multipliers and arithmetic pipelines without using large numbers of general-purpose lookup logic. Design performance depends on the selected speed grade, clocking, routing, I/O standards, memory mapping, and utilization, so the 630 MHz figure should not be interpreted as a guaranteed frequency for every arbitrary design. Typical uses include industrial automation, instrumentation, communications infrastructure, embedded control, video and image processing, networking equipment, and test-and-measurement systems. Its 29,952 logic cells and 676-ball package are appropriate for designs requiring substantial parallel logic, multiple interfaces, and moderate on-chip storage. Related programmable logic devices can be considered when a design requires larger fabric, embedded processors, advanced I/O, or a newer technology node. PCB implementation requires careful power planning, decoupling, BGA escape routing, and thermal analysis. The 676-ball FBGA footprint demands fine-pitch assembly capability, and every power ball or group must be connected according to the package data. Signal-integrity and timing closure also depend on correct I/O standards, controlled-impedance routing, clock topology, and complete timing constraints. This page combines exact device identification, package and technology characteristics, structured alternatives, application guidance, and PCB-focused engineering considerations. It also distinguishes directly orderable suffix variants from broader Spartan-3 options and distinguishes true pin-compatible replacements from parts that require a redesigned footprint.

RFQ تماس
XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG320C

XC3S1500-5FG320C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-5FG320C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 logic cells, and up to 221 I/O in a 320-pin fine-pitch BGA package. The device operates from a 1.2 V core supply, uses 90 nm process technology, and is offered in the -5 performance grade. Its architecture combines configurable logic, dedicated memory resources, programmable I/O, and embedded hard multipliers, making it suitable for digital control, interface, signal-processing, and embedded-system designs. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where a CPLD provides comparatively simpler fixed-capacity structures while an FPGA offers substantially greater logic density, routing flexibility, and signal-processing resources. The Spartan-3 family occupies the middle ground between small CPLDs and larger high-end FPGAs, targeting cost-sensitive designs that still require considerable parallelism and configurable peripherals. The XC3S1500-5FG320C provides 29,952 logic cells, 1,500,000 system gates, and 221 I/O. Its 90 nm fabrication supports a core supply of 1.2 V, while the -5 suffix identifies its performance grade. The 320-pin FBGA package reduces lead pitch and provides a compact implementation for systems requiring numerous board connections. These characteristics allow one package to carry control logic, memory interfaces, serial links, parallel buses, and arithmetic functions rather than requiring several separate programmable devices. The programmable architecture supports parallel datapaths that can improve throughput through hardware pipelining and resource replication. Designers can assign logic to look-up tables, connect it through programmable routing, and instantiate dedicated block RAM or multiplier resources when regular logic would consume excessive area or power. Performance is design-dependent because routing congestion, external memory speed, I/O standards, clocking, and tool constraints influence the final clock rate. The 725 MHz figure associated with this device family should therefore not be interpreted as a guaranteed system frequency for every design. Typical uses include industrial automation controllers, video-processing pipelines, communication gateways, data-acquisition systems, and embedded instruments. The 221 available I/O are valuable for parallel sensor interfaces, memory buses, control signals, and external converters. Because the FPGA can execute several operations concurrently, it can implement protocol conversion, filtering, buffering, and control functions in parallel. This reduces reliance on multiple processors when deterministic operation and direct hardware interaction are important. PCB implementation requires careful attention to the fine-pitch BGA footprint, power-plane geometry, via distribution, and ball-assignment constraints. Decoupling and multiple power rails must follow the manufacturer’s pinout and reference guidance. Signal integrity also depends on controlled-impedance routing for clocks and high-speed interfaces. Before committing a layout, engineers should generate the physical constraints and perform stackup-aware signal-integrity analysis rather than treating the compact package as a conventional fine-pitch BGA breakout task. This page combines device specifications, package and lifecycle information, qualification of same-footprint alternatives, parameter comparisons, and practical PCB-design guidance. The alternatives listed are restricted to pin-compatible Spartan-3 package variants, while unavailable technical details are clearly marked for datasheet review. This engineering-focused synthesis helps buyers compare migration choices while keeping board-level compatibility and timing closure as the primary decision criteria.

RFQ تماس
XC3S1500-5FG456C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG456C

XC3S1500-5FG456C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD XC3S1500-5FG456C is a Spartan-3 field-programmable gate array with approximately 1.5 million system gates, 29,952 configurable logic cells, 333 I/O sites, and a maximum clock frequency of 725 MHz. It is packaged in a 23 x 23 mm, 456-ball plastic BGA and operates from a nominal 1.2 V core supply, with a 1.14 V to 1.26 V core-voltage range. The commercial-grade -5 suffix supports operation from 0°C to 85°C. A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, programmable interconnect, block RAM, and dedicated I/O resources are configured after manufacture. Within the product hierarchy, an FPGA sits above simple programmable logic devices and provides parallel hardware implementation for digital control, signal processing, communications, and interface functions without relying on a general-purpose processor for time-critical operations. The XC3S1500 combines 29,952 configurable logic cells with 3,328 configurable logic blocks and approximately 1.5 million system gates. Its 333 I/O sites support board-level connections, while 432 Kbits of block RAM provide dedicated on-chip storage. The listed 725 MHz figure represents the maximum device operating speed used for timing-oriented designs; actual interface performance depends on the selected clock, I/O standard, routing, logic depth, and timing constraints. The device uses 90 nm CMOS fabrication and a 1.2 V core architecture. Multiple dedicated I/O banks allow separate voltage domains and selectable I/O standards, making careful bank planning important in mixed-speed designs. Because the FPGA is assembled in a fine-pitch 456-ball BGA, its power delivery, decoupling, via arrangement, and thermal performance depend heavily on multilayer PCB layout and assembly quality. Typical uses include industrial control, data acquisition, communications gateways, embedded video processing, instrumentation, and legacy interface consolidation. The 333 I/O sites are particularly useful for parallel buses, digital converters, memory interfaces, and multiple low-speed peripherals, while embedded block RAM supports packet buffering, FIFO structures, and local data storage. For new designs, verify that the Spartan-3 device, associated synthesis tools, and available intellectual-property cores remain suitable for the production program. An FPGA replacement should be checked for pin compatibility, supported I/O standards, memory resources, configuration interface, timing margins, and thermal performance rather than being selected from capacity alone. This page combines device specifications, lifecycle guidance, drop-in replacement analysis, application-oriented design notes, and a practical comparison framework. It helps engineers identify whether the exact XC3S1500-5FG456C fits a legacy 456-ball design and which parameters must be revalidated before production migration.

RFQ تماس
XC3S1500-5FG676C - 1.5M Gate Spartan-3 FPGA | AMD
XC3S1500-5FG676C

XC3S1500-5FG676C - 1.5M Gate Spartan-3 FPGA | AMD

The AMD/Xilinx XC3S1500-5FG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic cells, and a 676-ball FBGA package. The device operates from a 1.2 V core supply, is manufactured on a 90 nm process, and is specified in the -5 speed grade with a stated performance level of 725 MHz. A field-programmable gate array, or FPGA, is a semiconductor device containing programmable logic, routing, input/output, and memory resources. FPGA design flow combines hardware description languages, synthesis, place-and-route tools, timing analysis, and device programming. The Spartan-3 family occupies the FPGA category within programmable logic devices and is positioned for designs requiring substantial parallel processing in a single package. The XC3S1500 device provides 29,952 logic cells, 589,824 RAM bits, and 487 I/O positions according to its product listing. Its 676-ball surface-mount package supports dense connections among the configurable fabric, dedicated memory, and external circuitry. The -5 designation identifies the performance grade, while the C suffix identifies the commercial temperature class. Spartan-3 devices use a configurable architecture rather than a fixed logic function, allowing designers to implement parallel datapaths, state machines, interfaces, and control systems in one device. The 90 nm fabrication process and 1.2 V core supply place the component within the technology and power characteristics of the Spartan-3 generation. Performance also depends on the selected design, package speed characteristics, memory interface, and external circuitry. Typical applications include industrial automation, communications infrastructure, instrumentation, embedded control, video processing, and general-purpose digital signal processing. The large logic-cell count and 487 I/O positions are useful when a design must combine parallel computation with numerous external interfaces, while the integrated RAM resources support buffers, lookup tables, and moderate data-storage functions. A critical design step is power planning because FPGA configuration and dynamic switching activity can create substantial board-level power demand. Decoupling, supply sequencing, clock integrity, and thermal management should be reviewed against the Spartan-3 design guidance. Because the -5 part is a -5 speed-grade device, timing closure should use the appropriate device speed file and the worst applicable operating conditions. This product record combines the exact ordering code with package, logic-resource, process, and speed information, alongside drop-in same-family options, application guidance, and engineering-focused comparison data that help shorten component identification and design-review work.

RFQ تماس
XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx
XC3S1500-5FGG676C

XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S1500-5FGG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic elements, 487 user I/O, and 589,824 bits of block RAM in a 676-pin fine-pitch ball grid array. It operates from a 1.2 V supply with a documented 1.14 V to 1.26 V operating range and uses 90 nm FPGA process technology. The device supports operation up to 725 MHz as listed for this configuration. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output blocks, embedded block RAM, dedicated arithmetic resources, and programmable interconnect. Within the product hierarchy, this device belongs to the Spartan-3 FPGA family, which sits between basic fixed-function logic and higher-density programmable-logic families. Engineers use FPGAs for parallel data processing, protocol bridging, signal generation, image processing, and embedded control where field-updatable hardware is valuable. The XC3S1500 configuration provides 487 user I/O for high-speed external interfaces, while its 589,824 bits of block RAM support buffering, packet storage, and lookup functions. The -5 speed designation identifies the 725 MHz performance listing associated with this part number. The FG package suffix denotes the 676-pin fine-pitch BGA form used by the Spartan-3 family, and the trailing C identifies the commercial temperature grade. The 676-pin package makes this device suited to dense boards with substantial routing requirements. A 1.2 V core requires careful power-plane design, local decoupling, and attention to simultaneous switching noise. Because the package contains hundreds of connections, PCB design should follow the AMD Xilinx footprint, pinout, and design-assistance guidance rather than relying on generic BGA conventions. Typical uses include telecommunications line-card and interface logic, industrial data acquisition, video and image pipelines, storage controllers, and embedded signal-processing systems. The large I/O count is particularly useful for parallel buses, multiple high-speed links, and designs that combine several external interface standards. When planning a new design, check the Spartan-3 product status before committing the footprint. For an existing XC3S1500 design, preserve the exact power, decoupling, and routing architecture because FPGA configuration and I/O behavior are tightly coupled to the package and reference design. This page consolidates capacity, package, sourcing, and replacement information to support engineering review.

RFQ تماس
XC3S1600E-4FG400I - Spartan-3E FPGA, 33192 Logic Cells | AMD Xilinx
XC3S1600E-4FG400I

XC3S1600E-4FG400I - Spartan-3E FPGA, 33192 Logic Cells | AMD Xilinx

The AMD Xilinx XC3S1600E-4FG400I is a Spartan-3E field-programmable gate array with 33,192 logic cells, 1.6 million equivalent gates, 304 user I/O, and a 572 MHz maximum clock frequency in a 400-ball FBGA package. It operates from a 1.14 V to 1.26 V core supply and uses 90 nm CMOS technology. The -4 speed grade and I industrial temperature designation place it between the -1 and -6 performance options of the Spartan-3E family. An FPGA is a reprogrammable semiconductor containing configurable logic blocks, programmable interconnect, and input/output blocks. Its internal architecture allows digital designs to be implemented as parallel hardware rather than sequential software. The Spartan-3E family is positioned between low-cost CPLDs and larger high-end FPGAs, making it suitable for industrial control, communications, instrumentation, embedded video, and prototype systems that require substantial logic density without the resources of the largest device families. The XC3S1600E-4FG400I provides 3,688 configurable logic blocks according to the family documentation, organized into four slices per CLB. Dedicated block RAM and distributed RAM support buffering, lookup tables, FIFO structures, and data-plane designs. The device also includes digital clock managers, programmable I/O standards, and dedicated clock and configuration resources. Its 304 I/O provide substantial connectivity for external memory, buses, transceivers, and industrial interfaces. The 400-ball FBGA package requires a multilayer PCB with a carefully controlled escape-routing area, power planes, and high-speed routing discipline. The 1.2 V core rail and the package’s thermal characteristics must be evaluated against the system’s clock, I/O, and switching activity. Configuration loading, JTAG access, and bitstream compatibility are central considerations when replacing or upgrading an existing Spartan-3E board. Typical designs include industrial automation controllers, networked measurement equipment, data-acquisition systems, video-processing prototypes, embedded storage controllers, and communications infrastructure. Because the device is a mature Spartan-3E member, long-lived industrial programs can benefit from stable architecture and broad software-tool support, while new designs must confirm current availability and lifecycle commitments before layout release. This page summarizes the technical characteristics, practical design notes, package requirements, and drop-in replacement options for the XC3S1600E-4FG400I in one place. It is intended to accelerate schematic review, PCB planning, sourcing, and legacy design migration.

RFQ تماس
XC3S1600E-4FG484C - 1.6M-Gate Spartan-3E FPGA | AMD
XC3S1600E-4FG484C

XC3S1600E-4FG484C - 1.6M-Gate Spartan-3E FPGA | AMD

AMD XC3S1600E-4FG484C is a Spartan-3E field-programmable gate array with 1.6 million equivalent logic gates, 33,192 logic cells, 3,688 configurable logic blocks, and a 572 MHz maximum clock frequency. It is manufactured in 90 nm CMOS technology, operates from a 1.2 V core supply, and is supplied in a 484-pin FBGA package measuring 23 x 23 mm. The device provides 376 user I/O and is intended for programmable-logic, embedded-processing, communications, and industrial-control systems. A field-programmable gate array is a programmable-logic semiconductor in which configurable logic blocks, programmable interconnect, and dedicated I/O resources implement a digital system. In the product hierarchy, an FPGA belongs to programmable logic devices, complements application-specific integrated circuits, and provides shorter development cycles than a fully custom ASIC. The Spartan-3E family combines relatively high logic density with a large selection of I/O and embedded resources for cost-sensitive embedded designs. The XC3S1600E-4FG484C offers 33,192 logic cells distributed across 3,688 CLBs, corresponding to an advertised 1.6 million equivalent gates. Its 376 I/Os support connection to external memory, control signals, and parallel or serial peripherals. A 572 MHz clock rating supports demanding datapaths, while the -4 suffix identifies a four-nanosecond speed grade. The C suffix identifies the commercial temperature option. The 90 nm CMOS Spartan-3E architecture provides programmable logic, block RAM, dedicated multipliers, clock-management resources, and general-purpose I/O within one device. Its 484-ball FBGA footprint offers high I/O density for compact systems, but it also requires careful escape-routing, via-in-pad awareness, and thermal-management planning. The package has a 1.0 mm ball pitch and a stated height of 2.60 mm. Typical applications include industrial control and automation, communications infrastructure, embedded video processing, instrumentation, data acquisition, and general-purpose interface consolidation. The 376 available I/Os are particularly useful for designs connecting external processors, memory devices, ADC or DAC components, transceivers, and custom logic. An FPGA implementation can also consolidate several fixed-function chips into one programmable subsystem while preserving field-update flexibility. Designers should assign every ball, including power and ground, directly from the manufacturer package data and preserve the recommended power and ground distribution network. Because a 484-BBGA has dense escape routing, use a PCB stack-up and via strategy compatible with a 1.0 mm pitch, and confirm assembly, inspection, and rework capabilities before committing to the layout. This page combines the device architecture, package constraints, drop-in replacement distinctions, and application-oriented design guidance needed to evaluate the XC3S1600E-4FG484C for an existing 484-FBGA Spartan-3E design.

RFQ تماس
XC3S1600E-4FG484I - 1.6M Gate Spartan-3E FPGA | AMD Xilinx
XC3S1600E-4FG484I

XC3S1600E-4FG484I - 1.6M Gate Spartan-3E FPGA | AMD Xilinx

The AMD Xilinx XC3S1600E-4FG484I is a Spartan-3E family Field Programmable Gate Array (FPGA) delivering 1.6 million system gates, 33,192 logic cells, and 376 user I/Os in a 484-ball Fine-Pitch Ball Grid Array (FBGA) package. Fabricated on a 90nm CMOS process with a 1.2V core supply, this industrial-temperature device (I suffix, -40C to +100C) runs at speed grade -4 and integrates 29,504 registers and 648 Kbits (663,552 bits) of distributed and block RAM. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs) and programmable interconnects that the designer configures in the field via HDL (VHDL/Verilog). Within the programmable logic hierarchy, the FPGA sits above CPLDs in capacity and sits alongside ASSPs as a core digital logic implementation platform for system-on-chip prototyping and production designs. Key features of the XC3S1600E include 3,688 CLBs/LABs providing high logic density, 572MHz maximum toggle capability supported by dedicated digital clock managers (DCMs), and abundant block RAM for FIFOs and dual-port memories. The 376 I/Os support multiple I/O standards with configurable banks, enabling wide data-path interfaces. Architecturally, the Spartan-3E platform uses a 4-input look-up table (LUT) based fabric with dedicated carry logic, multiplier blocks, and DCMs for clock conditioning - well suited to cost-sensitive control, glue logic, and DSP-lite tasks. The 90nm process keeps core power low at 1.2V while retaining robust routing flexibility. Typical applications include industrial control and automation, embedded system prototyping, data acquisition glue logic, motor control interfaces, and communications line cards. The wide 376-I/O budget makes it a natural fit for bus bridging and parallel-to-serial adaptation. A key design consideration: the Spartan-3E family is mature, so plan configuration via a platform Flash PROM (such as XCF-series) and verify 1.2V core, 3.3V auxiliary, and I/O bank rails meet sequencing guidance in the datasheet. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFQ تماس
XC3S1600E-5FG400C - 1.6M Gate Spartan-3E FPGA | AMD
XC3S1600E-5FG400C

XC3S1600E-5FG400C - 1.6M Gate Spartan-3E FPGA | AMD

The AMD XC3S1600E-5FG400C is a Spartan-3E field-programmable gate array with 1,600,000 equivalent logic gates, 33,192 logic cells, 3,688 configurable logic blocks, and a maximum clock frequency of 657 MHz. It uses 90 nm CMOS technology, operates from a 1.2 V supply, and is packaged in a 400-ball plastic BGA with a 1.00 mm ball pitch and a 21 mm by 21 mm body. Its combination of programmable logic density, dedicated digital signal processing resources, and a high-performance package makes it suitable for demanding embedded digital systems. An FPGA is a programmable-logic semiconductor whose interconnect and logic fabric can be configured after manufacture. In the product hierarchy, the XC3S1600E belongs to the Spartan-3E FPGA family, which combines configurable logic blocks, programmable input/output, block RAM, dedicated multipliers, and digital clock managers. This makes an FPGA more flexible than a fixed-function ASIC while supporting parallel processing and hardware acceleration that would be difficult to implement with conventional processors alone. The key features of this device are its 33,192 logic cells, 3,688 CLBs, and 1,600,000 equivalent gates. The -5 speed designation corresponds to a maximum operating clock frequency of 657 MHz. Two dedicated digital clock managers are associated with the larger Spartan-3E devices in this family, supporting clock generation, phase shifting, and frequency management for high-speed designs. The 400-ball BGA also provides a substantial pin count for external memory interfaces, high-speed I/O, and multi-bank programmable logic. The XC3S1600E-5FG400C uses 90 nm CMOS fabrication and a 1.2 V supply. Its 400-ball package has a 1.00 mm terminal pitch and a 21 mm square body, requiring a carefully designed multilayer PCB with short, impedance-controlled routes and a low-inductance power grid. Because the package exposes many high-speed signals and a large number of power connections, controlled-impedance layout, solid reference planes, and comprehensive power and ground-plane distribution are central to reliable operation. Typical applications include industrial control, networking equipment, communications infrastructure, embedded video processing, data acquisition, and high-throughput digital signal processing. The large logic capacity can support parallel datapaths, protocol handling, and custom accelerators, while the dedicated clock and arithmetic resources address designs requiring deterministic timing. The same 400-ball package also supports prototype-to-production migration when the configured design, bitstream, pin constraints, and timing closure remain valid. Before finalizing a PCB layout, verify ball assignments, power requirements, configuration pins, and differential I/O rules in the AMD DS312 family documentation. Treat the 657 MHz figure as a device maximum rather than guaranteed system performance: board routing, power integrity, IO standards, memory topology, and timing constraints determine the practical operating frequency. This product page combines the verified XC3S1600E-5FG400C specifications with practical FPGA design guidance, package considerations, and clearly qualified same-family replacement options. It is intended to help engineers identify the correct device, plan the 400-ball BGA layout, and distinguish speed- or grade-related alternatives without treating a similar FPGA as a guaranteed drop-in replacement.

RFQ تماس
XC3S1600E-5FGG320C - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx
XC3S1600E-5FGG320C

XC3S1600E-5FGG320C - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx

The AMD (Xilinx) XC3S1600E-5FGG320C is a Spartan-3E family FPGA with 1.6 million system gates, 33,192 logic cells, and 250 user I/Os, fabricated on 90nm CMOS process technology and housed in a 320-ball fine-pitch BGA (FGG320, 19x19 mm) package. It operates from a 1.2V core supply (1.14V to 1.26V) with a commercial temperature range of 0C to 85C junction, and speed grade -5. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks (CLBs), embedded memory, and programmable interconnects that designers configure via a hardware description language such as Verilog or VHDL. Within the semiconductor hierarchy, an FPGA sits under programmable logic devices, alongside CPLDs and ASICs, and is used to implement custom digital logic without fabricating a custom chip. Key features of the XC3S1600E include a large 1.6M-gate fabric for mid-density designs, 250 user I/Os supporting multiple I/O standards, Spartan-3E cost-optimized architecture, and availability of configuration via platform flash devices such as the XCF32P. The Spartan-3E family was widely adopted in telecommunications, industrial control, and consumer electronics, per Microchip USA product data. Architecturally, the Spartan-3E fabric uses 4-input look-up tables (LUTs), dedicated carry logic, block RAM, and embedded multipliers, enabling DSP datapaths, glue logic consolidation, bus interfaces, and control sequencing on a single chip. Typical applications include industrial control systems, telecommunications line cards, test equipment, motor control interfaces, and legacy system sustenance where a proven mid-density FPGA is already designed in. Design consideration: this part is officially obsolete and no longer manufactured, per DigiKey lifecycle data, so new designs should evaluate AMD 7-series (Spartan-7, Artix-7) or cross-brand alternatives; existing designs should secure stock or a qualified migration path. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not consolidated in the manufacturer datasheet.

RFQ تماس
XC3S1600EFG400 - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx
XC3S1600EFG400

XC3S1600EFG400 - Spartan-3E FPGA 1.6M Gates | AMD/Xilinx

The AMD/Xilinx XC3S1600EFG400 is a member of the Spartan-3E family of Field Programmable Gate Arrays (FPGAs), offering a high-density programmable logic solution with 33,192 logic cells and an equivalent gate count of 1,600,000. Housed in a 400-ball FBGA package (FG400), this device provides 304 user I/O pins and 663,552 bits of block RAM, making it suitable for a wide range of digital designs. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing the implementation of complex digital circuits without the need for custom fabrication. They are a subset of programmable logic devices (PLDs) and are widely used in prototyping, low-to-medium volume production, and applications requiring reconfigurability. Key features of the XC3S1600EFG400 include 33,192 logic cells, 663,552 bits of block RAM, and support for a maximum clock frequency of 572 MHz. The device operates from a 1.2V core voltage and is manufactured using advanced CMOS technology. The FG400 package offers 400 balls with a 1.00 mm pitch, providing a compact footprint for space-constrained designs. The Spartan-3E architecture is optimized for high performance and low cost, featuring dedicated multipliers, digital clock managers (DCMs), and support for various I/O standards including LVCMOS, LVTTL, and differential standards. The device also includes configuration support via JTAG, SPI, and SelectMAP interfaces, enabling flexible system integration. Typical applications for the XC3S1600EFG400 include industrial control, automotive infotainment, consumer electronics, and communication systems. Its balance of logic density, I/O count, and cost makes it ideal for bridging ASIC prototyping and production. When designing with this FPGA, careful attention must be paid to power supply decoupling and configuration bitstream storage. The 1.2V core requires stable power, and the configuration data is typically stored in an external SPI flash, which must be selected for compatibility.

RFQ تماس
XC3S200-4FT256C - 200K Spartan-3 FPGA | AMD / Xilinx
XC3S200-4FT256C

XC3S200-4FT256C - 200K Spartan-3 FPGA | AMD / Xilinx

AMD XC3S200-4FT256C is a Spartan-3 field-programmable gate array with 200000 system gates, 4320 cells, and a 256-LBGA package. The -4 speed grade operates at up to 630 MHz, while the device uses a nominal 1.2 V core supply and is manufactured in 90 nm process technology. These headline characteristics position the FPGA between fixed-function logic and larger programmable-logic devices for cost-sensitive, moderate-complexity embedded systems. A field-programmable gate array is a programmable logic device in which configurable logic blocks, programmable input/output blocks, and programmable interconnect form a user-defined digital circuit. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs and mask-programmable logic. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA can be reconfigured after manufacture to implement control, interface, protocol, signal-processing, or security functions in parallel. The Spartan-3 architecture provides 480 configurable logic blocks and 4320 cells according to the supplied distributor and comparison data. Its 256-ball package supports 256 terminals for device configuration, power, clocking, and user I/O. The -4 designation identifies the performance grade, while the commercial C suffix corresponds to the stated 0°C to 85°C operating-temperature range. A maximum supply voltage of 1.26 V and a nominal 1.2 V FPGA supply are also reported in the available data. The 90 nm Spartan-3 process supports a useful balance of logic capacity, static power, dynamic performance, and manufacturing cost. At up to 630 MHz, the XC3S200-4FT256C can satisfy clock-domain requirements that are more demanding than simple glue logic while remaining smaller and less complex than a high-end FPGA. Exact timing, I/O standards, supported memory interfaces, configuration options, and core-current limits require confirmation in the complete manufacturer datasheet before a new design is released. Typical uses include industrial control and automation, communications equipment, embedded test systems, consumer products, instrumentation, and compact control modules. Its parallel programmable resources can implement multiple finite-state machines, data acquisition logic, communication bridges, and auxiliary processors concurrently. The 256-terminal package also makes the device suitable for designs requiring more configuration and user I/O than a small CPLD, although board density and routing must be assessed at the schematic and PCB stages. Designers should treat the package, voltage rails, decoupling, configuration interface, clocking, and I/O standards as a coordinated system rather than isolated specifications. Place bypass capacitors close to the supply pins, preserve the required configuration path, and verify every ball assignment against the exact package drawing. Because the supplied snippets contain inconsistent secondary descriptions of package and cell data, the authoritative manufacturer pinout and datasheet should control any production implementation. This page combines the verified distributor specifications with engineering-focused application guidance, design notes, parameter comparisons, and same-family drop-in candidates. It also distinguishes confirmed values from unavailable electrical details, helping engineers identify the correct replacement without mistaking a similar FPGA for a guaranteed production substitute.

RFQ تماس
XC3S200-4FT256I - 200K Spartan-3 FPGA | AMD | FTBGA-256
XC3S200-4FT256I

XC3S200-4FT256I - 200K Spartan-3 FPGA | AMD | FTBGA-256

The AMD XC3S200-4FT256I is a 200K-gate Spartan-3 field-programmable gate array (FPGA) with 4,320 logic cells, a 630 MHz maximum clock frequency, and a 256-terminal FineLine BGA package measuring 17 mm by 17 mm. The device uses 90 nm FPGA technology and operates from a 1.14 V to 1.26 V internal core supply. Its 256-terminal package provides a high pin count for dense programmable-logic designs while maintaining a compact board footprint. A field-programmable gate array is a configurable digital semiconductor containing programmable logic blocks, programmable interconnect, and input/output resources. An FPGA belongs to the semiconductor hierarchy, programmable-logic IC hierarchy, and Spartan-3 FPGA family. Unlike a fixed-function application-specific integrated circuit, an FPGA allows system designers to implement parallel logic, control functions, signal processing, and interface logic in hardware and later update the configuration through a configuration memory or JTAG programming path. The XC3S200-4FT256I combines 4,320 logic cells with 200K system gates and a maximum clock frequency of 630 MHz. The -4 speed designation identifies the performance grade, while the I suffix identifies the industrial temperature grade. The device is specified for 0 C to +85 C operation in the supplied distributor data, making it suitable for industrial and embedded control equipment where environmental requirements exceed consumer-grade conditions. The 17 mm by 17 mm FTBGA-256 package supports compact PCB layouts but requires careful escape routing, via-in-pad or via fan-out strategies, assembly-process control, and inspection. The 1.2 V core supply requires a regulated, low-noise supply rail and appropriate power-plane distribution. Because this is a legacy Spartan-3 FPGA, designers should also verify configuration memory availability, toolchain support, lifecycle status, and second-source requirements before committing a new production design. Typical applications include industrial control, instrumentation, data acquisition, communication interfaces, embedded signal processing, and prototype systems requiring configurable parallel logic. The high-pin-count package is particularly useful when the design needs numerous user I/O or dedicated interface resources, although the exact user I/O count is not provided in the verified data. A key design consideration is that replacing an XC3S200-4FT256I is not limited to matching its package. A true drop-in candidate must also preserve pin assignment, voltage requirements, configuration behavior, timing characteristics, and software support. This page summarizes verified distributor and manufacturer-linked information, compares documented drop-in candidates, and identifies engineering details that must be confirmed before PCB release.

RFQ تماس
XC3S200-4FTG256C - 200K Spartan-3 FPGA | AMD
XC3S200-4FTG256C

XC3S200-4FTG256C - 200K Spartan-3 FPGA | AMD

AMD XC3S200-4FTG256C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, a 630 MHz maximum clocking frequency, and a 256-ball low-profile BGA package. Designed for cost-sensitive programmable-logic applications, the device combines configurable logic, block RAM, dedicated DSP resources, and a 1.2 V core supply in a single surface-mount package. The -4 speed designation identifies its performance grade, while FTG256C identifies the 256-ball package and commercial temperature option. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture rather than being permanently patterned. Within the FPGA hierarchy, an FPGA sits above fixed-function logic and below complex programmable systems such as SoCs and microcontrollers. Its configurable LUTs, routing fabric, dedicated memories, and I/O blocks allow one physical device to implement many digital functions, including control logic, interfaces, data acquisition, communications, and signal-processing pipelines. The XC3S200 family is identified by 200,000 system gates and includes 4,320 configurable logic cells according to the AMD Spartan-3 device information. A maximum clock frequency of 630 MHz supports demanding control and datapath designs, although attainable system performance depends on logic depth, routing, memory use, and timing constraints. The core operates from 1.2 V, reducing supply requirements in compact embedded systems. Its 256-LBGA package provides dense I/O connectivity while supporting high-density board layouts. The Spartan-3 architecture implements programmable logic through configurable lookup tables and programmable interconnect. Dedicated block RAM supports buffering, packet storage, and data-domain conversion, while DSP blocks accelerate multiply-accumulate operations used in filtering, modulation, and waveform processing. The -4 speed grade provides a defined timing-performance class for design planning, and the 90 nm fabrication technology places this device in an established, cost-oriented FPGA generation. Typical applications include industrial control, consumer electronics, video and image processing, communications interfaces, embedded data capture, educational platforms, and compact embedded systems. Its combination of 4,320 logic cells, dedicated resources, and 256-ball packaging makes it suitable for designs that need programmable functionality without the resource level of a larger FPGA. Designers should assign a pin-compatible clock, configure an appropriate Spartan-3 PROM or in-system configuration interface, and verify all I/O standards against the device datasheet. Dense BGA routing requires careful escape, via, and plane management, while clock, decoupling, and power-distribution networks should follow the AMD reference guidance to preserve timing and signal integrity. This product page combines device specifications, package information, pricing visibility, qualified drop-in candidates, and practical implementation guidance. It also distinguishes exact-footprint replacements from broader Spartan-3 alternatives, helping engineers confirm mechanical, electrical, lifecycle, and software-tool implications before changing a production bill of materials.

RFQ تماس
XC3S200-4FTG256I - Spartan-3 FPGA 200K Gates | Xilinx
XC3S200-4FTG256I

XC3S200-4FTG256I - Spartan-3 FPGA 200K Gates | Xilinx

The Xilinx XC3S200-4FTG256I is a Spartan-3 family field programmable gate array (FPGA) offering 200,000 system gates and 4,320 logic cells in a 256-ball FineLine BGA (FTG256) package, with a 1.2V core voltage, industrial temperature rating of -40C to +100C, and a -4 speed grade supporting internal performance up to approximately 630 MHz. A field programmable gate array is a semiconductor device containing a fabric of configurable logic blocks (CLBs), programmable interconnects, and I/O blocks that the designer configures after manufacturing. FPGAs sit within the broader programmable logic hierarchy: CLB -> FPGA -> programmable logic device -> digital IC. Unlike fixed-function ASICs, FPGAs allow field reprogramming, making them ideal for prototyping, low-to-medium volume production, and designs requiring in-service updates. Key features of the XC3S200 include 2,160 slices built on a 90nm process technology, 12 blocks of 18Kbit block RAM totaling 216 Kbits of embedded dual-port memory, four 18x18 hardware multipliers for DSP operations, a Digital Clock Manager (DCM) for clock deskew and frequency synthesis, and up to 173 user I/Os supporting multiple I/O standards such as LVTTL, LVCMOS, SSTL, and LVDS on bank-selectable VCCO rails. Technically, the Spartan-3 fabric uses a four-input lookup table (LUT) per slice logic cell with dedicated fast carry logic for arithmetic chains. The -4 speed grade denotes the fastest standard commercial/industrial timing bin of the Spartan-3 family. Configuration is performed via serial or parallel PROMs (Xilinx Platform Flash) in Master/Slave Serial or SelectMAP modes with JTAG boundary-scan support per IEEE 1149.1. Typical applications include industrial control and motor drive logic, communication protocol bridging, test and measurement instrumentation, and embedded coprocessing with the hardware multipliers for modest DSP tasks. The 17x17mm FTBGA footprint suits space-constrained boards requiring high I/O density. A key design consideration is power: the 1.2V core requires a dedicated regulator, and I/O bank VCCO supplies must match the connected logic standards; total power scales with clock frequency and toggle rates, so use the Xilinx power estimator early in design. This page synthesizes verified distributor data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس
XC3S200-4PQ208C - 200K Spartan-3 FPGA | AMD / Xilinx
XC3S200-4PQ208C

XC3S200-4PQ208C - 200K Spartan-3 FPGA | AMD / Xilinx

The AMD / Xilinx XC3S200-4PQ208C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 480 configurable logic blocks, and 221,184 RAM bits in a 208-pin PQFP package. It operates from a 1.2 V core supply and is specified for the commercial temperature range of 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O paths are configured after manufacture. Within the product hierarchy, the XC3S200-4PQ208C is an FPGA, then a programmable-logic device, and ultimately a semiconductor. Compared with fixed-function logic ICs, an FPGA lets engineers implement parallel processing, control, communications, and signal-generation functions in one reconfigurable device while retaining the same package and pinout across design revisions. The supplied product data identifies 141 I/O, 4,320 logic cells, 480 CLBs, 221,184 RAM bits, and 200,000 system gates. The “-4” speed designation and an associated listing report 630 MHz performance, while the commercial “C” suffix identifies the specified temperature grade. Its 208-pin PQFP package exposes substantially more device I/O than the smaller 100-pin Spartan-3A options, making it suitable for designs with wider external buses or more peripheral connections. The XC3S200-4PQ208C fits industrial control, communications infrastructure, embedded instrumentation, video processing, test equipment, and legacy embedded systems. A practical design can use its programmable logic for parallel data acquisition, protocol conversion, signal conditioning, and supervisory control while retaining configuration data in external nonvolatile flash. Engineers should verify every power rail, configuration interface, and high-speed I/O constraint against the complete Spartan-3 documentation before layout release. Power and termination design remain central to reliable FPGA implementation. Provide the specified core and I/O supplies, route each supply through its documented decoupling network, and use a configuration scheme that matches the board’s flash and control logic. Because the supplied excerpts do not provide full electrical limits, pin assignments, or power-budget data, those details require confirmation from the manufacturer’s official Spartan-3 documentation before schematic completion. This page consolidates verified distributor specifications, same-package family comparisons, commercial availability references, and application-specific engineering guidance. It distinguishes the XC3S200-4PQ208C from smaller Spartan-3 packages and higher-density PQFP208 devices, helping engineers determine whether the device’s logic, memory, I/O, and thermal requirements align with an existing 208-pin PCB design.

RFQ تماس
XC3S200-4PQ208I - 200K-Gate Spartan-3 FPGA | AMD Xilinx
XC3S200-4PQ208I

XC3S200-4PQ208I - 200K-Gate Spartan-3 FPGA | AMD Xilinx

AMD Xilinx XC3S200-4PQ208I is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 141 user I/O, and a stated 630 MHz performance figure, supplied in a 208-pin PQFP package. The device operates from a 1.2 V core supply and is built on 90 nm CMOS process technology. Its -4 speed designation identifies a performance grade, while the PQ208 suffix denotes the 208-pin plastic quad flat package and I suffix identifies the industrial temperature option. A field-programmable gate array is a programmable semiconductor in which digital logic, interfaces, and system functions are configured after manufacture. Within the product hierarchy, an FPGA is a semiconductor and a programmable logic device. The Spartan-3 family targets cost-sensitive designs requiring more flexibility than fixed-function logic, while providing configurable logic blocks, dedicated arithmetic resources, block RAM, and programmable I/O within one integrated device. The XC3S200-4PQ208I combines 480 configurable logic blocks with 4,320 logic cells and 141 user I/O according to the supplied manufacturer-family data. Its 200,000-system-gate count describes the family device's logic-equivalent capacity rather than a fixed gate count. The 630 MHz figure likewise requires careful interpretation because achievable system performance depends on the selected design, timing constraints, clocking, I/O standards, routing, and the associated Xilinx toolchain. The 90 nm Spartan-3 architecture supports integration of control logic, data acquisition, communications glue logic, state machines, and modest parallel-processing functions. Reconfigurability allows design revisions to be implemented in the FPGA bitstream rather than through a PCB respin. Dedicated block RAM can buffer sampled or packet data, while programmable I/O can connect the device to external clocks, data buses, transceivers, displays, and industrial interfaces subject to voltage and timing constraints. Typical uses include industrial automation, programmable logic controllers, motor-control and sensor-processing systems, embedded communications, instrumentation, and cost-sensitive consumer or control electronics. The 208-pin PQFP provides more I/O than a small FPGA package, making it useful where parallel external buses, control signals, or multiple interfaces must coexist with the Spartan-3 logic fabric. Design planning should begin with the AMD/Xilinx Spartan-3 datasheet and the appropriate ISE or Vivado-era design flow for the installed device family. Verify the exact pinout, supported I/O standards, configuration requirements, decoupling, clock topology, and exposed thermal and power constraints on the selected package before layout release. This page consolidates verified distributor specifications, pricing references, same-family drop-in candidates, and practical selection considerations for engineers evaluating the XC3S200-4PQ208I.

RFQ تماس
XC3S200-4PQG208C - 200K Gate Spartan-3 FPGA | AMD
XC3S200-4PQG208C

XC3S200-4PQG208C - 200K Gate Spartan-3 FPGA | AMD

The AMD XC3S200-4PQG208C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 221,184 bits of block RAM, and 141 I/O in a 208-BFQFP package. It operates from a 1.2 V core supply and provides four performance levels suitable for cost-sensitive industrial, communications, control, and data-acquisition systems. A field-programmable gate array, or FPGA, is a semiconductor whose logic, memory, and I/O resources can be configured after fabrication. Within the programmable-logic hierarchy, an FPGA provides higher implementation flexibility than a fixed-function logic IC while offering reusable hardware for parallel processing, interface bridging, control, and signal conditioning. The Spartan-3 architecture combines configurable logic blocks, dedicated block RAM, programmable I/O, and clock-management resources. The XC3S200-4PQG208C provides 4,320 logic cells and 221,184 bits of block RAM, giving a board designer enough resources for parallel datapaths, protocol conversion, control logic, and moderate signal-processing functions. Its 141 I/O provide substantial connectivity for external memories, converters, transceivers, and industrial interfaces. The -4 suffix identifies the device performance class, while the commercial-temperature C suffix distinguishes it from the industrial-temperature I version. Spartan-3 devices use a 1.2 V core voltage and programmable configuration logic to implement user-defined digital circuits. The 208-BFQFP package exposes 141 configurable user I/O and supports surface-mount PCB assembly. Designers can use the same logic design across supported Spartan-3 devices when device resources, speed grades, package pinouts, and electrical constraints remain compatible. Typical uses include industrial automation modules, PLC interfaces, motion-control systems, telecommunications protocol converters, low-cost data-acquisition equipment, and embedded control platforms. The combination of configurable logic, dedicated block RAM, and 141 I/O is particularly useful when a design must consolidate several fixed-function functions into one programmable device. PCB design should follow the manufacturer’s Spartan-3 pinout and power-supply recommendations, including correct decoupling, configuration-interface support, signal-integrity routing, and adequate thermal copper. Verify the selected bitstream, clock source, pin constraints, and I/O standards against the appropriate device configuration before releasing production files. This product reference combines manufacturer-family specifications, package and resource details, commercial sourcing information, pin-compatible Spartan-3 alternatives, and practical implementation guidance to support faster engineering evaluation and more disciplined replacement planning.

RFQ تماس
XC3S200-4PQG208I - 200K Gate Spartan-3 FPGA, 208-Pin PQFP | AMD
XC3S200-4PQG208I

XC3S200-4PQG208I - 200K Gate Spartan-3 FPGA, 208-Pin PQFP | AMD

The AMD (Xilinx) XC3S200-4PQG208I is a Spartan-3 Field-Programmable Gate Array (FPGA) delivering 200,000 system gates and 4,320 logic cells in a 208-pin PQFP (BFQFP) package, with 141 user I/O pins, a 630 MHz internal clock and a 1.2 V core supply built on 90 nm CMOS technology. The -4 suffix denotes the 4 ns speed grade and the I suffix denotes the extended industrial temperature grade. A field-programmable gate array is a reconfigurable digital integrated circuit whose logic fabric, interconnect and I/O blocks are defined by a bitstream loaded from a serial configuration memory. Spartan-3 sits in the low-cost FPGA tier of the hierarchy FPGA > programmable logic > reconfigurable semiconductor, aimed at volume cost-sensitive designs rather than maximum performance. Key features of this device include 4,320 logic cells organized as 480 configurable logic blocks, 4,320 flip-flops, 20 dedicated block RAM of 18 Kbit each, and 20 dedicated 18x18 multiplier blocks for DSP-style arithmetic. The fabric delivers 630 MHz performance on the -4 speed grade while consuming only 1.2 V at the core, which simplifies thermal design in industrial enclosures. Technically the device combines a 90 nm CMOS process with a selectively-bonded 200,000-gate architecture, 141 user I/O, four 6 Mbit block RAM resources scaled to the 4320-cell configuration, and dedicated multiplier/adder logic. Configuration is by bitstream from standard SPI or parallel PROG flash, and the device supports readback, boundary scan (JTAG) and MultiBoot reconfiguration for field updates. Typical applications include industrial automation and PLC control logic, motor drive and servo sequencing, sensor signal pre-processing, industrial networking gateways, embedded display control, and low-cost instrumentation front ends where a 208-pin PQFP avoids fine-pitch BGA assembly costs. A key design consideration is that the Spartan-3 family is a mature, mature-node technology: verify supply continuity and any migration path to a newer family before starting a long-volume program, and reserve PCB footprint space for the PQFP thermal and pin-1 orientation requirements. This page brings together the manufacturer and distributor specification set, a qualified drop-in alternative list, and practical design notes covering configuration, decoupling, JTAG access and footprint handling that are not consolidated in a single datasheet.

RFQ تماس
XC3S200-4TQ144C - 200K Gate Spartan-3 FPGA | Xilinx
XC3S200-4TQ144C

XC3S200-4TQ144C - 200K Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S200-4TQ144C is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic cells, 97 I/Os, a 1.2 V core supply, and a 144-pin TQFP package. It is a -4 speed-grade device specified for a commercial operating temperature range of 0°C to 85°C. The configurable logic and dedicated input/output resources make it a practical FPGA platform for embedded control, parallel data processing, industrial automation, communication interfaces, and cost-sensitive custom digital systems. An FPGA is a user-programmable semiconductor in the broader integrated-circuit hierarchy. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, memory resources, and I/O blocks into a device whose digital behavior can be defined after manufacture. The Spartan-3 architecture is part of the FPGA and programmable-logic-device family, offering a practical balance between logic capacity, I/O availability, device cost, and design flexibility. The XC3S200-4TQ144C provides 192 adaptive logic modules, which are organized into 4,320 logic cells. Its 97 available I/Os allow connections to external memory, sensors, communications transceivers, display controllers, and general-purpose digital peripherals. The verified family data identifies a maximum frequency of 725 MHz for the -4 device, while the exact AC timing limits for each I/O standard must be selected from the manufacturer datasheet. A 1.2 V core supply is typical for this 90 nm Spartan-3 generation, with auxiliary supply requirements depending on the selected I/O standards. The TQFP-144 package is a surface-mount plastic quad flat package that offers substantially more I/O than a compact QFP, while remaining easier to assemble and inspect than a large BGA. Its 144 leads include power, ground, configuration, clock, and user I/O functions. Exact lead assignments, configuration pins, and dedicated behavior depend on the package pinout and device datasheet, so board designers should use the official pin table rather than infer assignments from another package variant. Typical uses include industrial automation controllers, motor and motion-control logic, low-cost instrumentation, data acquisition, protocol bridging, educational FPGA platforms, and compact embedded systems that benefit from parallel hardware acceleration. The Spartan-3 device can implement finite-state machines, DSP-oriented datapaths, parallel-to-serial conversion, and interface control concurrently, reducing reliance on multiple fixed-function components. The primary design consideration is timing closure. Engineers should establish the target clock, external memory interface, I/O standards, and pin assignments early, then use the Xilinx synthesis, implementation, and timing-analysis flow. Decoupling, ground-plane continuity, clock routing, and I/O standard compatibility should be reviewed against the manufacturer guidance before schematic release. This page combines verified device specifications, commercial availability data, same-package replacement candidates, and practical selection guidance. It also distinguishes confirmed values from parameters that still require review in the complete manufacturer datasheet, helping engineers avoid treating incomplete distributor metadata as a complete design specification.

RFQ تماس
XC3S200-4TQ144I - 200K Gate Spartan-3 FPGA | AMD | TQFP
XC3S200-4TQ144I

XC3S200-4TQ144I - 200K Gate Spartan-3 FPGA | AMD | TQFP

The AMD XC3S200-4TQ144I is a Spartan-3 field-programmable gate array with 200,000 system gates, 4,320 logic elements, 221,184 bits of embedded RAM, and 97 I/O pins in a 144-pin TQFP package. The -4 speed grade is specified for operation up to 630 MHz, while the I suffix denotes the extended industrial-temperature option. The device uses a 90 nm process and operates from a 1.14 V to 1.26 V core supply. A Spartan-3 FPGA belongs to the configurable-logic hierarchy: FPGA > programmable logic device > field-programmable gate array > semiconductor. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA combines configurable logic blocks, block RAM, programmable I/O, dedicated clocking resources, and embedded hard processors in one reconfigurable device. This allows interface logic, control functions, and parallel data processing to be consolidated on a single PCB. The XC3S200-4TQ144I provides 4,320 four-input LUT-based logic elements and 221,184 embedded RAM bits. Verified listings identify 1,920 adaptive logic modules and 480 LAB/CLB resources for this device. Its 97 I/O pins support board-level connectivity, and the 144-lead TQFP package provides a surface-mount form factor compatible with conventional PCB assembly and inspection processes. The 90 nm Spartan-3 architecture combines programmable logic with dedicated block RAM and programmable interconnect. It is intended for cost-sensitive embedded systems where parallel processing, flexible interfaces, and field reconfiguration provide more value than a fixed logic implementation. The 1.14 V to 1.26 V core range reflects the device's internally regulated core operation, while external I/O requirements remain part of the complete board power architecture. Typical uses include industrial control, embedded communications, instrumentation, data acquisition, display interfaces, and compact embedded processing systems. Its 4,320 logic elements and 221,184 RAM bits make it appropriate for protocol bridging, parallel-to-serial conversion, control-plane logic, and modest algorithmic workloads. Designs requiring substantially greater logic density or memory bandwidth should use a larger FPGA family. Designers should verify the exact pinout, configuration interface, I/O standards, clock requirements, and decoupling recommendations against the manufacturer datasheet before layout release. Because the TQFP package has fine-pitch leads, PCB assembly and inspection require suitable paste, stencil, placement, and inspection processes. Legacy-device supply status and configuration-memory interface compatibility also deserve review before new production commitments. This page consolidates verified distributor specifications, same-family drop-in candidates, practical design guidance, and parameter-level comparisons. It distinguishes confirmed electrical and packaging facts from information that could not be extracted from the supplied web records, helping engineers evaluate the XC3S200-4TQ144I without relying on ambiguous distributor summaries.

RFQ تماس
XC3S200-4VQ100C - 200K Spartan-3 FPGA | AMD | 100-VQFP
XC3S200-4VQ100C

XC3S200-4VQ100C - 200K Spartan-3 FPGA | AMD | 100-VQFP

The AMD/Xilinx XC3S200-4VQ100C is a Spartan-3 Field Programmable Gate Array (FPGA) with 200,000 system gates, 63 user I/O pins, and a 100-pin VQFP package. It operates from a 1.2 V FPGA supply and is specified for a 0 °C to 85 °C operating-temperature range. The device is intended for embedded programmable-logic applications where moderate logic density, surface-mount packaging, and a broad I/O count are more important than the very high performance of a large FPGA. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. The XC3S200-4VQ100C belongs to the Spartan-3 FPGA family, placing it in the broader hierarchy of programmable-logic device, FPGA, and semiconductor. Its 200,000 system gates provide a practical platform for control logic, interface bridging, signal conditioning, and embedded state-machine designs. The 100-pin VQFP package also supports conventional PCB assembly and inspection processes. The -4 speed designation identifies the device performance grade, while VQ100 identifies the 100-pin VQFP package and C identifies the commercial temperature grade. The listed electrical characteristics include 63 user I/O pins, a 1.14 V to 1.26 V core-supply range, and a 0 °C to 85 °C operating range. These figures define the principal design constraints for voltage regulation, thermal planning, signal-interface design, and industrial or commercial equipment. Typical uses include industrial control and automation modules, communications-interface adapters, embedded test equipment, and low-to-medium complexity digital systems. The FPGA can implement parallel logic, state machines, counters, protocol front ends, and control functions in one configurable device. Engineers should confirm that the selected design does not require more logic resources, I/O, clocking, or memory than the available device resources provide. The most important design consideration is ensuring that the 1.2 V core rail is generated with adequate tolerance and decoupling, while all connected I/O structures remain compatible with the target board voltage levels. Because this is a surface-mount VQFP package, solderability, pin-1 orientation, assembly profile, and thermal performance should be reviewed against the selected PCB footprint and manufacturing process. This page consolidates distributor availability, verified device parameters, package information, and practical FPGA selection guidance. It also distinguishes exact drop-in alternatives from upgrade candidates so engineers can assess PCB reuse without confusing package compatibility with complete functional equivalence.

RFQ تماس