PIC18F45K80-H/PT
PIC18F45K80-H/PT - 8-bit MCU, 64MHz, 32KB Flash, ECAN, TQFP-44 | Microchip
The Microchip Technology PIC18F45K80-H/PT is a high-temperature, 8-bit PIC microcontroller built on the PIC18F family core, delivering 64 MHz (16 MIPS) performance with 32 KB of Flash program memory in a 44-pin TQFP (10x10 mm) package. It features an integrated ECAN (Enhanced Controller Area Network) module with six programmable receive/transmit buffers, three dedicated transmit buffers, and a charge time measurement unit (CTMU) for capacitive-touch user interfaces. The device operates from 1.8 V to 5.5 V with nanoWatt XLP extreme-low-power modes, making it suitable for energy-conscious applications. A 12-bit ADC with advanced analog interface, multiple timers, enhanced compare/capture/PWM modules, and 35 digital I/O lines round out its peripheral set, while the -H temperature grade marks it for high-temperature environments beyond the standard industrial -40 C to +85 C range.
A microcontroller (MCU) is a single-chip computer that integrates a CPU, volatile and non-volatile memory, and configurable peripherals around a shared bus. The PIC18F is an enhanced 8-bit Harvard-architecture MCU family from Microchip with a RISC-style instruction set, hardware multiply, and 16-bit instruction words. Within the broader microcontroller taxonomy, the PIC18F45K80 belongs to the PIC18 K-series, distinguished by the K80 family's combination of ECAN, nanoWatt XLP, and CTMU peripherals tailored for automotive, building, elevator, and capacitive-touch designs.
Key features include integrated ECAN with flexible buffer configuration, 32 KB Flash supporting self-programmability via runtime write capability, 3.6 KB RAM, 1 KB EEPROM, an internal oscillator selectable up to 64 MHz, and a 12-bit ADC supporting touch sensing via the CTMU. Three dedicated ECAN transmit buffers, FIFO or standard buffer modes, and programmable filtering add robustness to CAN bus workloads. The combination of ECAN and nanoWatt XLP enables sensor and actuator nodes that wake from CAN traffic, prolonging battery life in remote field installations.
Architecturally, the PIC18F45K80 uses a modified Harvard memory layout with separate program and data buses, a 32-level hardware stack, and a 16-bit instruction path that delivers predictable interrupt latency. The ECAN module implements CAN 2.0B with 29-bit identifiers and is ISO 16845 certified for conformance at the protocol layer, while the nanoWatt XLP technology reduces sleep current to nanoampere levels and supports multiple wake sources including INT, RTCC, and watchdog.
Typical applications include building automation (HVAC, lighting, occupancy), elevator controllers, automotive CAN nodes, capacitive-touch user interfaces, and industrial sensors that must operate from battery power. The wide 1.8 V to 5.5 V supply range allows direct connection to 3.3 V sensors or 5 V actuator drivers without level shifters, simplifying analog front-end design.
When designing with this MCU, budget carefully for the 44-pin TQFP package's fine 0.8 mm pitch, which requires careful PCB layout, and verify that the VDD rise-time specification (tVDDR) is met to ensure proper POR behavior. Choosing the -H grade part (vs -I or -E variants) gives extended high-temperature operation beyond +85 C and is the key consideration for this part number. This page synthesizes distributor pricing, drop-in alternatives, and PCB design notes not found in the manufacturer datasheet.
RFQ
تماس