محصولات (21,000+)

XMC4300F100F256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
XMC4300F100F256AAXQMA1

XMC4300F100F256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4300F100F256AAXQMA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 144 MHz, with 256 KB of flash memory, 128 KB of SRAM, and an integrated Ethernet MAC in a PG-LQFP-100-25 package. The device belongs to the XMC4000 family of industrial microcontrollers and combines a high-performance processor core with real-time Ethernet connectivity and mixed-signal peripherals. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the wider category of microcontrollers, embedded processors, and semiconductors. It combines a processor core with memory, communication peripherals, timers, and analog or mixed-signal resources in one integrated circuit. XMC devices add industrial real-time capabilities and deterministic peripherals to the standard Arm Cortex-M architecture, making them suitable for control systems that require both network communication and precise timing. The XMC4300F100F256AAXQMA1 provides 256 KB of flash for firmware and 128 KB of SRAM for working data. Its 144 MHz Arm Cortex-M4 core includes the architectural features expected of the Cortex-M4 family, while the integrated Ethernet MAC supports industrial Ethernet-connected equipment. The PG-LQFP-100-25 package provides 100 leads and is intended for surface-mount PCB assembly. The order code identifies the industrial XMC4300 configuration and its qualification and temperature-grade attributes. EtherCAT support is an important feature of the XMC4300 family. The family documentation describes EtherCAT as a real-time Ethernet standard intended to combine substantial bandwidth with deterministic communication timing. Integrating this functionality into an Arm Cortex-M4 microcontroller allows EtherCAT nodes to be implemented without requiring a separate communications processor, provided the system also uses suitable external network hardware. Typical uses include industrial automation controllers, EtherCAT slave equipment, motor-control systems, industrial communication gateways, and embedded control platforms with both analog and digital signal-chain requirements. The 144 MHz processing rate supports responsive control loops, while the integrated Ethernet MAC and EtherCAT capability address synchronized networking. Designers should account for the exact peripheral mapping, electrical limits, clock requirements, and package dimensions shown in the manufacturer datasheet and reference manual. PCB design should preserve the recommended power, decoupling, clock, reset, and analog grounding arrangements from the XMC4300 documentation. The 100-lead LQFP geometry requires adequate copper clearance between adjacent pins and careful inspection of fine-pitch soldering. Firmware support should account for peripheral-specific startup requirements and the timing constraints of EtherCAT and other high-speed communication functions. This product page combines manufacturer specifications with application guidance, practical PCB considerations, and a qualified comparison framework. It is intended to help engineers confirm memory capacity, processor performance, package compatibility, connectivity requirements, and implementation risks before committing the XMC4300F100F256AAXQMA1 to an industrial embedded design.

RFQ تماس
XMC4300F100K256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
XMC4300F100K256AAXQMA1

XMC4300F100K256AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4300F100K256AAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 144 MHz core, 256 KB of Flash memory, and Ethernet MAC capability in a 100-pin PG-LQFP package. It combines deterministic microcontroller control with embedded-network connectivity, making it suitable for industrial gateways, connected controllers, and networked automation equipment. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor designed for embedded control. The Cortex-M4 core combines efficient exception handling, low-latency peripheral access, and optional signal-processing instructions within the broader MCU semiconductor category. In the XMC4000 family, this processing capability is combined with on-chip peripherals, memory, and communications resources for real-time industrial designs. The XMC4300F100K256AAXQMA1 operates at up to 144 MHz and includes 256 KB of Flash for firmware and application code. Its Ethernet MAC provides a hardware interface for connected-control and gateway products. The 100-pin LQFP package supports a high pin count for external interfaces while remaining compatible with conventional surface-mount PCB assembly. The manufacturer identifies the device as an industrial XMC4000-series product. The device architecture is based on the ARM Cortex-M4 processor and includes on-chip memory and peripheral subsystems. The integrated Ethernet MAC allows a single-chip architecture to handle real-time control and network communication without requiring a separate Ethernet controller. Peripheral interfaces, timers, communications channels, and interrupt resources support industrial control, sensing, communications, and supervisory functions. Typical uses include industrial Ethernet gateways, programmable automation controllers, building automation equipment, motor and motion-control systems, connected sensors, and embedded network appliances. Its combination of 144 MHz processing performance and 256 KB Flash is particularly useful when the firmware must combine network protocol handling with deterministic control tasks in a compact industrial design. PCB design should follow the Infineon XMC4300 datasheet for pin multiplexing, power-supply connections, decoupling, clock configuration, and exposed-pad or thermal-layout requirements. Firmware planning should also account for the Ethernet PHY arrangement: the MAC does not imply that an external transceiver is unnecessary, so signal integrity and magnetics must be designed around the complete physical network interface. This page combines the manufacturer product information, ordering details, technical highlights, application guidance, and verified drop-in alternatives to support faster component selection and PCB planning for industrial embedded-networking designs.

RFQ تماس
XMC4300F100K256AAXUMA1 - 144MHz Arm Cortex-M4 MCU, 256KB Flash | Infineon
XMC4300F100K256AAXUMA1

XMC4300F100K256AAXUMA1 - 144MHz Arm Cortex-M4 MCU, 256KB Flash | Infineon

The Infineon XMC4300F100K256AAXUMA1 is a 32-bit industrial microcontroller built around an Arm Cortex-M4 core with integrated Floating Point Unit and DSP instructions, operating at up to 144 MHz with 256 KB of embedded Flash memory and an on-chip Ethernet MAC, housed in a 100-pin PG-LQFP package with an exposed thermal pad. The 3.3 V supply part number suffix indicates the intended operating supply class for industrial systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash program memory, RAM, and dedicated peripherals into one package. The XMC4000 family from Infineon sits in the industrial 32-bit microcontroller segment, positioned between general-purpose 8/16-bit control devices and higher-end application processors, and belongs to the broader hierarchy of embedded processors used in industrial automation, networking, and motor control equipment. Key features of this device include the 144 MHz Arm Cortex-M4F core with single-precision FPU and DSP instruction extensions for fast control-loop and signal-processing work, 256 KB of Flash for firmware and boot code, an integrated Ethernet MAC for networked control, and a rich set of industrial peripherals typical of the XMC4000 family such as multiple timer/counter units, serial interfaces, and analog conversion channels. The Cortex-M4 architecture with an FPU is also what allows deterministic real-time behavior combined with a familiar ARM toolchain ecosystem. The XMC4300-F100K256-AA variant carries the AA industrial grade designation, meaning it is intended for extended industrial temperature and qualification requirements rather than cost-sensitive consumer applications. Using the Arm Cortex-M4 instruction set means existing CMSIS-based firmware, HAL libraries, and GCC/IAR/Keil toolchains can be reused, which lowers migration effort for teams moving from smaller Cortex-M parts. Typical applications include industrial Ethernet gateways and PLC communication controllers, factory automation nodes, motor and motion control controllers, sensor and actuator network hubs, building automation and HVAC controllers, and industrial sensor equipment that needs an Ethernet interface for connectivity. The key design consideration is the exposed pad on the LQFP-100 package: it must be tied to ground with a solid copper pour and adequate via stitching to carry core current and keep junction temperature within the device limit at 144 MHz operation. This page consolidates manufacturer part details, distributor availability references, drop-in alternatives within the XMC4000 family, and practical PCB and thermal design guidance that are not collected together on a single manufacturer datasheet page.

RFQ تماس
XMC4400F100F256ABXQSA1 - Cortex-M4 MCU | Infineon
XMC4400F100F256ABXQSA1

XMC4400F100F256ABXQSA1 - Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100F256ABXQSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 256 KB of flash memory, and 80 KB of SRAM in a 64-LQFP package with an exposed pad. The device belongs to the XMC4000 family and integrates Ethernet connectivity and deterministic microcontroller peripherals for connected industrial equipment. A microcontroller is a programmable semiconductor that executes embedded control code, monitors inputs, drives outputs, and manages communication interfaces. The XMC4400 combines an ARM Cortex-M4 processor with flash memory, SRAM, analog and digital peripherals, Ethernet support, and debug facilities in one integrated circuit. Its role within an embedded system spans processor core, real-time control peripheral, communication controller, and industrial-control semiconductor. The 120 MHz Cortex-M4 core supports efficient 32-bit processing, while the XMC4000 peripheral architecture supports predictable control-loop execution. The 256 KB embedded flash stores firmware and configuration data, and the 80 KB SRAM provides working memory for protocol stacks, acquisition buffers, and control algorithms. Integrated Ethernet makes the device suitable for networked industrial nodes without requiring a separate communication processor. Three principal characteristics define this configuration: a 120 MHz ARM Cortex-M4 processor, 256 KB of embedded flash, and a compact 64-LQFP package. Infineon identifies the underlying XMC4400-F100F256-BA device as an industrial Cortex-M4 microcontroller with Ethernet. The ordering designation XMC4400F100F256ABXQSA1 identifies the specific package, temperature, flash-memory, and orderable configuration used in the product record. Typical applications include industrial Ethernet controllers, programmable automation equipment, connected sensors, motor and motion-control systems, and embedded gateways. The microcontroller is especially useful where a single-core design must combine real-time control, local data processing, and Ethernet communication. Its combination of control peripherals, memory, and connectivity supports consolidation of functions that might otherwise require several discrete devices. When designing around the XMC4400F100F256ABXQSA1, preserve the exposed-pad thermal and electrical requirements of the LQFP package and assign every pin according to the manufacturer pin-description table. The Ethernet interface also requires careful clock, magnetics, routing, and isolation planning. Firmware selection should account for the 256 KB flash limit and the 80 KB SRAM allocation, including driver stack, application code, and diagnostic data. This product record combines the exact XMC4400F100F256ABXQSA1 ordering information with manufacturer electrical documentation, package guidance, application context, and same-family migration options. It is intended to support component identification, firmware and peripheral planning, PCB design, and replacement assessment without obscuring the differences between ordering codes and electrically distinct devices.

RFQ تماس
XMC4400F100F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F256BAXQMA1

XMC4400F100F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4400F100F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB flash, 80 KB SRAM, Ethernet connectivity, and a 100-pin PG-LQFP package with an exposed pad. The device combines a high-resolution PWM unit with 150 ps resolution and is positioned for real-time HMI, industrial automation, networking, and signal-processing control. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor within the microcontroller and embedded-processing hierarchy. It executes control software, services digital inputs, drives outputs, and manages communication interfaces in equipment that requires deterministic real-time behavior. The XMC4400 combines that processor core with analog, timing, communications, and debugging peripherals intended to reduce external component count in industrial control designs. Principal device attributes include a 120 MHz Cortex-M4 core, 256 KB program flash, 80 KB SRAM, and Ethernet support. The 150 ps PWM resolution supports precise pulse timing, while the 3.3 V device and industrial temperature designation align it with embedded industrial systems. Its PG-LQFP-100-25 package provides 100 leads and an exposed thermal pad for board-level heat spreading. The XMC4400 integrates a broad peripheral set around the Cortex-M4 core, including Ethernet and a high-resolution PWM unit. Its memory arrangement provides 256 KB for firmware and 80 KB for working data, making it suitable for control loops, communication stacks, and application logic. The exact peripheral inventory and electrical limits for the selected ordering designation should be confirmed against the Infineon XMC4400 datasheet before schematic release. Typical uses include industrial Ethernet controllers, programmable logic controllers, real-time human-machine interfaces, digital power conversion, motor-control front ends, and embedded signal-processing systems. Ethernet supports network-connected supervisory equipment, while deterministic PWM and timer resources support precise actuator control. The 120 MHz processing rate also allows control software and communications tasks to coexist without relying on a separate processor. The most important layout consideration is thermal management around the exposed pad. Follow the manufacturer land-pattern and copper recommendations rather than treating the pad as an optional thermal feature. Decoupling, Ethernet routing, analog grounding, and exposed-pad connection must also follow the pin-description and layout guidance in the Infineon datasheet. This product page combines the manufacturer ordering information, core memory and operating attributes, application context, engineering design notes, and qualified same-brand comparison parts. It is intended to accelerate component selection while keeping schematic, firmware, and qualification decisions tied to Infineon documentation.

RFQ تماس
XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512ABXQMA1

XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100F512ABXQMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and a 100-pin PG-LQFP package. It belongs to the XMC4000 family and integrates a 10/100 Ethernet MAC for industrial communication designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. In the system hierarchy, the XMC4400 is an MCU, a more specific form of embedded processor and semiconductor. Unlike a general-purpose desktop CPU, an MCU is designed around deterministic control, communication, and real-time system tasks, with its peripherals and memory optimized for embedded products. The device's principal characteristics include an Arm Cortex-M4 processor core, 120 MHz operating frequency, 32-bit architecture, and 512 KB of flash. Infineon identifies the XMC4400-F100F512-BA as an industrial 32-bit microcontroller with a 10/100 Ethernet MAC. The PG-LQFP-100-11 package provides 100 externally accessible connections for digital control, communications, clocking, power, debug, and analog-interface requirements. The Cortex-M4 architecture uses the Arm Thumb instruction set and supports efficient interrupt-driven control software. Its floating-point capability makes it suitable for applications that combine digital control with numerical processing. The integrated Ethernet MAC supports connected industrial equipment, although the complete electrical design still requires the external magnetics, clocking, protection, and connector implementation described by Infineon. Typical uses include industrial Ethernet controllers, factory automation equipment, motor-control systems, building automation interfaces, connected measurement instruments, and embedded network gateways. The 120 MHz processing rate provides useful headroom for communication stacks, supervisory control, diagnostics, and real-time control tasks when the software architecture and interrupt latency are designed together. PCB planning should begin with the manufacturer's pin-description table and reference design because the 100-pin package contains dedicated power, ground, debug, Ethernet, analog, and digital functions. Pay particular attention to ground distribution, decoupling, clock source selection, Ethernet magnetics placement, and programming or debug access before finalizing the board layout. This product record combines the manufacturer ordering information, package and memory details, Ethernet function description, and source links needed for engineering review. It also organizes replacement considerations and design guidance so engineers can assess fit, firmware impact, and layout compatibility before committing a new design.

RFQ تماس
XMC4400F100F512ABXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512ABXUMA1

XMC4400F100F512ABXUMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100F512ABXUMA1 is a 32-bit industrial microcontroller based on the Arm Cortex-M4 core, operating at 120 MHz with 512 KB of flash memory in a PG-LQFP-100 package with an exposed pad. The device belongs to the XMC4000 family and includes a 10/100 Ethernet MAC, making it suitable for industrial networking, embedded control, and connected automation systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. Within the embedded-control hierarchy, this device is an Arm Cortex-M4 MCU, a 32-bit real-time microcontroller, and an industrial communications controller. Its combination of deterministic peripheral integration and Ethernet connectivity allows a single controller to supervise sensors, actuators, communications, and safety-oriented control functions without requiring a separate network interface. The XMC4400F100F512ABXUMA1 provides 512 KB of flash, a 120 MHz clock, and a 32-bit Arm Cortex-M4 processing core. Its 10/100 Ethernet MAC supports industrial Ethernet designs, while the PG-LQFP-100 package exposes a broad set of digital and analog I/O through 100 pins. The exposed die pad must be connected to the common ground potential, as specified for packages containing this thermal and electrical ground feature. The XMC4400 series architecture combines a high-performance Cortex-M4 core with dedicated real-time control and communication resources. At 120 MHz, the processor provides substantially more computational headroom than typical low-rate control MCUs, while the Ethernet MAC allows network-connected equipment to exchange operational data and support higher-level industrial protocols implemented in firmware. Detailed peripheral assignments, electrical limits, clock options, and package dimensions should be taken from the manufacturer datasheet and reference manual before schematic or PCB sign-off. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, networked sensor gateways, industrial communications equipment, and compact embedded control modules. The 512 KB flash capacity provides room for application code, communication stacks, configuration data, and update logic, while the 100-pin package supports the pin count required by multi-interface industrial designs. PCB implementation requires careful attention to the common-ground architecture and exposed-pad connection. Connect VSS, VSSA, and VSSO to the same ground potential, and connect the exposed pad to common ground as directed by the manufacturer layout guidance. Confirm all decoupling, power-supply sequencing, analog-ground, and high-speed Ethernet layout requirements against the XMC4400 hardware documentation before production release. This product page consolidates the verified ordering identity, core frequency, memory capacity, package, and Ethernet configuration with engineering guidance for comparison and design review. It also distinguishes exact-order alternatives from broader XMC4400 family references so procurement teams can assess substitution risk without treating electrically similar but undocumented parts as drop-in replacements.

RFQ تماس
XMC4400F100F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512BAXQMA1

XMC4400F100F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100F512BAXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and integrated 10/100 Ethernet MAC capability. The device is supplied in a 100-pin LQFP package with an exposed pad. It belongs to the XMC4000 family and combines a high-performance Cortex-M4 core with an industrial peripheral set for embedded control, communications, and real-time applications. The XMC4000 series is a microcontroller family within the broader embedded semiconductor and industrial automation hierarchy. It provides a deterministic hardware platform for motor control, industrial networking, sensor acquisition, and connected machinery. The XMC4400F100F512BAXQMA1 is particularly suited to designs requiring substantial flash capacity, high clock speed, Ethernet connectivity, and deterministic control peripherals without using a separate communications processor. Key features include an ARM Cortex-M4 processor at 120 MHz, 512 KB of flash, 32-bit data-bus capability, a 10/100 Ethernet MAC, 12-bit ADCs, a 12-bit DAC, and a high-resolution PWM unit. The Ethernet MAC supports industrial Ethernet applications, while the advanced timer and PWM resources support precise motor and power conversion control. The 100-LQFP package exposes the required peripheral and power connections while supporting conventional board assembly and thermal management through its exposed pad. The microcontroller’s architecture is designed for embedded systems requiring both control-loop responsiveness and communication capability. Its 120 MHz Cortex-M4 execution rate supports protocol processing, supervisory logic, and real-time control tasks. The Ethernet MAC reduces the need for external Ethernet hardware when the system design uses compatible PHY components. The ADC and DAC resources support analog measurement, signal conditioning, and waveform generation without requiring separate converters in suitable designs. Typical applications include industrial Ethernet controllers, factory automation equipment, motor drives, power conversion systems, building automation controllers, and embedded gateways. The device can also serve in sensor-heavy industrial systems where periodic sampling, communication, and control functions must coexist in one device. Its exposed-pad LQFP package requires careful PCB thermal design to dissipate power reliably. Designers should verify the exact pin assignments, power-supply sequencing, analog input limits, and exposed-pad connection requirements in the Infineon datasheet before layout release. Ethernet designs also require correct PHY integration, magnetic-component selection, controlled-impedance routing, and isolation or surge-protection planning according to the installation environment. The manufacturer documentation is the authoritative source for final electrical limits and board implementation details.

RFQ تماس
XMC4400F100F512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100F512BAXUMA1

XMC4400F100F512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100F512BAXUMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating up to 120 MHz, with 512 KB of embedded flash and a 100-pin PG-LQFP package. The XMC4000 series provides integrated Ethernet connectivity, including a 10/100 Ethernet MAC, for connected industrial equipment requiring deterministic real-time control and network communication. Its LQFP-100 package exposes the device's digital and analog peripherals in a surface-mount format suitable for automated assembly. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The ARM Cortex-M4 core gives this device a 32-bit architecture suited to industrial automation, embedded networking, motor control, and data acquisition. The XMC4000 family combines the Cortex-M4 core with on-chip Ethernet, analog interfaces, timers, communication peripherals, and safety-oriented features designed for industrial applications. The 120 MHz operating frequency provides processing headroom for protocol handling, control-loop execution, diagnostics, and application logic. Its 512 KB flash memory stores firmware, configuration data, and application code, while the device's Ethernet MAC supports connection to 10/100 Mb/s Ethernet networks. The manufacturer identifies the XMC4400-F100F512-BA family variant as an industrial 32-bit Cortex-M4 device with 10/100 Ethernet MAC functionality. The XMC4400F100F512BAXUMA1 ordering designation identifies the 100-pin package, 512 KB flash configuration, industrial temperature/profile option, tape-and-reel order code, and grade suffix. Its 100-pin PG-LQFP-100 package offers a larger pin count than small-outline packages, supporting broad access to the mixed-signal and communication resources available in the XMC4000 family. Exact pin assignments and exposed-pad connections should be taken from the Infineon XMC4400 datasheet and package drawing before layout release. Typical uses include industrial Ethernet controllers, factory automation nodes, embedded gateways, motor and power-control systems, industrial sensors, and networked test equipment. For these applications, the device's 120 MHz Cortex-M4 performance and integrated 10/100 Ethernet MAC reduce the need for separate network controllers while keeping real-time processing and communications on the same device. PCB design should treat all 100 package terminals and the exposed pad, where applicable, according to the manufacturer's land pattern and thermal guidance. Decoupling, analog grounding, Ethernet magnetics, clock stability, and exposed-pad vias are especially important in a mixed-signal industrial design. Firmware selection should also verify the complete ordering-code decoding and all peripheral variants associated with the exact derivative. This product page combines the manufacturer ordering information with practical engineering guidance for industrial networking, firmware selection, PCB implementation, and drop-in replacement assessment. It is intended to help engineers identify whether the XMC4400F100F512BAXUMA1 matches a required Cortex-M4, 512 KB flash, 10/100 Ethernet, and 100-pin LQFP platform before requesting a quotation.

RFQ تماس
XMC4400F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K256ABXQSA1

XMC4400F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100K256ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120MHz with 256KB of embedded flash memory and 80KB of RAM. The device is packaged in a PG-LQFP-100-11 industrial temperature grade package. Its single-core architecture combines deterministic real-time control capability with extensive communication peripherals for factory automation, industrial networking, motor control, and embedded communication equipment. A microcontroller is a semiconductor device that integrates a processor core, memory, timers, communication interfaces, and analog or digital peripherals onto one package. The Cortex-M4 core provides a 32-bit processing architecture with hardware execution support for common embedded instructions, while the XMC4000 family targets industrial applications requiring deterministic timing, reliable communications, and extensive I/O. This places the device in the hierarchy of embedded microcontroller, 32-bit MCU, ARM Cortex-M4 MCU, and industrial semiconductor. The XMC4400F100K256ABXQSA1 combines 120MHz processing performance with 256KB flash and 80KB SRAM. Its communication resources include CAN, Ethernet, I2C, LIN, SPI, UART, and USB according to the product listing. These interfaces support connections to sensors, actuators, industrial transceivers, service modules, supervisory systems, and plant-floor equipment. The LQFP-100 package provides 100 leads and is suitable for conventional PCB assembly and inspection processes. The XMC4000 architecture is designed for industrial applications where deterministic peripherals and a broad peripheral set simplify system integration. Ethernet and CAN support industrial communication links, while SPI, UART, I2C, and LIN allow connection to a wide range of embedded devices. Timer and event-management resources support precise control tasks in machinery, test systems, and connected production equipment. A system designer can therefore use one MCU for supervisory logic, communications, and real-time control rather than splitting those tasks across separate devices. Typical applications include industrial Ethernet controllers, CAN-based automation nodes, motor-control peripherals, sensor aggregation systems, building and factory automation equipment, and industrial USB gateways. The 120MHz operating frequency supports responsive protocol handling and control-loop execution, while 256KB flash provides room for application code, bootloader functions, configuration data, and communication stacks. The principal design consideration is the 100-pin footprint. Designers should assign all pins according to the manufacturer pin-description table, route communication interfaces away from sensitive analog circuitry, and provide the decoupling and clock network required by the reference design. The LQFP package is thermally and mechanically straightforward for industrial boards, but its fine pitch still requires controlled soldermask, paste, and assembly capability. Use the Infineon XMC4400 datasheet and reference manual for the complete pin list, electrical limits, startup requirements, and peripheral multiplexing rules.

RFQ تماس
XMC4400F100K256BAXUMA2 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K256BAXUMA2

XMC4400F100K256BAXUMA2 - 120MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4400F100K256BAXUMA2 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 120 MHz, with 256 KB of flash memory, 80 KB of SRAM, and Ethernet connectivity. The device is supplied in a 100-pin PG-LQFP package with an exposed pad, making it suitable for industrial control, communications, and embedded automation systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. It belongs to the embedded processor hierarchy, alongside system-on-chip and application-specific processors, and executes firmware that controls sensors, motors, communications, and safety-related system functions. The ARM Cortex-M4 core uses a 32-bit architecture and combines deterministic peripheral access with efficient interrupt handling for real-time embedded workloads. The XMC4400 combines 256 KB of programmable flash with 80 KB of SRAM, giving embedded software room for code, working memory, Ethernet stacks, and communication buffers. Its 120 MHz operating frequency supports responsive control loops and protocol processing, while the XMC4000 family integration consolidates Ethernet and industrial peripherals into one component. This reduces board area compared with separate processor and communication solutions. The integrated Ethernet interface is the defining feature for networked industrial equipment. The microcontroller can connect embedded controllers to Ethernet infrastructure without requiring a separate network controller, allowing designers to consolidate motor control, communications, and local supervision into a single controller. The manufacturer identifies the XMC4400-F100F256-BA as an industrial ARM Cortex-M4 microcontroller with Ethernet, 256 KB flash, and 80 KB SRAM. Typical applications include industrial Ethernet controllers, automated production equipment, motor and actuator controllers, building automation gateways, sensor-network nodes, and embedded communications modules. Its combination of deterministic processing, substantial on-chip memory, and integrated Ethernet supports compact control platforms that must communicate reliably with supervisory systems. PCB implementation requires careful treatment of the exposed thermal pad and supply pins. Place the device on a multilayer board with a low-impedance ground plane, route high-current and high-speed interfaces away from sensitive analog sections, and follow the manufacturer pin-description and layout guidance. Confirm every decoupling, clock, reset, and Ethernet connection against the datasheet before fabrication. This product page combines manufacturer specifications, package details, practical design guidance, and traceable replacement analysis. It also distinguishes confirmed drop-in options from devices that may require firmware, peripheral, or PCB verification, helping engineers shorten procurement and design-review cycles.

RFQ تماس
XMC4400F100K512ABXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4400F100K512ABXQMA1

XMC4400F100K512ABXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4400F100K512ABXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 512 KB of flash memory and integrated 10/100 Ethernet support. The device is supplied in a 100-pin PG-LQFP package designated PG-LQFP-100-11. A microcontroller is a semiconductor system built around a CPU core, embedded memory, peripherals, and interfaces. In the hierarchy of electronic components, a microcontroller belongs to the embedded-processor and semiconductor families. Its combination of programmable logic, digital interfaces, and real-time control capabilities allows one device to supervise sensors, process data, and coordinate communication in an industrial equipment design. The XMC4400F100K512ABXQMA1 combines a 120 MHz ARM Cortex-M4 processor with 512 KB of program flash. The Cortex-M4 architecture provides a 32-bit instruction set and deterministic real-time control capabilities, while the larger flash allocation supports embedded networking, industrial communication, and control firmware. Integrated 10/100 Ethernet provides a wired network interface for supervisory control, process monitoring, and connected automation equipment. The manufacturer describes the XMC4400 as an industrial microcontroller family with an extensive peripheral set. Its 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 48-pin devices, allowing external interfaces and mixed-signal connectivity to be distributed across a single controller. Pin, peripheral, voltage, and timing details should be assigned from the pin-description and electrical-characteristics tables in the manufacturer datasheet. Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic devices, sensor-hub designs, and compact embedded control platforms. The 512 KB flash capacity is useful for networking stacks and application firmware, while the 120 MHz processing rate supports responsive digital control. The integrated 10/100 Ethernet interface is especially relevant to designs that must exchange commands or telemetry over a local wired network. When designing a PCB around the PG-LQFP-100-11 package, preserve the manufacturer's recommended decoupling, analog-supply, clock, and Ethernet layout practices. Check all supply rails, external component values, and unused-pin requirements against the datasheet before schematic release. Firmware integration also requires the correct peripheral configuration, startup support, and XMC4400 reference-manual guidance. This page organizes the confirmed device identity, electrical facts, package details, commercially relevant questions, and defensible same-family alternatives. It also adds practical selection and design guidance intended to help engineers determine whether the XMC4400F100K512ABXQMA1 fits an embedded industrial-control design before requesting a quotation.

RFQ تماس
XMC4400F100K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K512ABXQSA1

XMC4400F100K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100K512ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 512 KB of flash memory in a 100-pin LQFP package with an exposed pad. It is designed for industrial embedded systems requiring deterministic real-time control, extensive digital peripherals, and integrated 10/100 Ethernet connectivity. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, analog peripherals, and general-purpose I/O into one device. The XMC4000 series combines an Arm Cortex-M4 processor core with industrial communications and real-time control resources, placing it within the hierarchy of embedded MCU, 32-bit microcontroller, and programmable semiconductor. This integration reduces component count while providing deterministic control for connected industrial equipment. The most prominent device characteristics are a 120 MHz operating frequency, 512 KB of flash, a 32-bit Arm Cortex-M4 core, and integrated 10/100 Ethernet support. The suffix-selected PG-LQFP-100-11 package provides 100 leads and an exposed thermal pad for board-level heat spreading. A 3.3 V operating supply is identified for this ordering option, while detailed RAM capacity, flash organization beyond the stated 512 KB, temperature limits, and peripheral assignments require confirmation from the manufacturer datasheet and pin description table. The Arm Cortex-M4 architecture supports efficient exception-based real-time operation through its interrupt system and integrated DSP extensions. XMC4000-family resources are suited to mixing communication protocols with deterministic control loops. The Ethernet MAC allows the MCU to participate directly in 10/100 Ethernet systems, reducing the need for a separate network controller when the selected board design includes the required magnetics, PHY, routing, and isolation or surge-protection implementation. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor-control systems, industrial communications gateways, sensor-hub platforms, and connected test equipment. The combination of 120 MHz processing performance, 512 KB flash, and Ethernet integration is especially useful when a controller must combine real-time peripheral handling with network connectivity while retaining a compact 100-pin surface-mount footprint. PCB implementation should follow the package-specific land pattern, exposed-pad connection, decoupling, and thermal recommendations in the Infineon datasheet. Designers must also assign every multiplexed pin according to the manufacturer pin-description table and validate the external Ethernet interface, clock configuration, reset behavior, and peripheral clock requirements for the complete system. This product page combines the XMC4400F100K512ABXQSA1 ordering information with same-family alternatives, parameter-by-package comparisons, application guidance, and practical implementation notes. It is intended to help engineers determine whether the device meets the processor, memory, package, Ethernet, and lifecycle requirements of a new industrial embedded design.

RFQ تماس
XMC4400F100K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K512BAXQMA1

XMC4400F100K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F100K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 kB of embedded flash and a 100-pin PG-LQFP package with exposed pad. The device belongs to the XMC4000 family and integrates an Ethernet MAC with 10/100 Ethernet support for connected industrial equipment. Its operating supply is 3.3 V, while the -25 designation identifies the device’s extended temperature-grade ordering position. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7E-M architecture. It combines a real-time processing core with timers, communication peripherals, memory interfaces, and GPIO in one integrated circuit. Within the product hierarchy, the XMC4400 is a microcontroller, embedded processor, and semiconductor designed for industrial control systems where deterministic peripherals and network connectivity are more important than general-purpose computing performance. Principal features include 120 MHz processing, 512 kB of flash memory, 10/100 Ethernet MAC capability, and a high-resolution PWM unit with 150 ps resolution. The fine PWM resolution is especially useful in digital power conversion, where precise duty-cycle control can improve regulation behavior and reduce harmonic distortion. The integrated communication and timing resources also reduce the need for external interface components in industrial Ethernet and automation equipment. The XMC4000 peripheral set includes dedicated digital power conversion resources and multiple high-speed timer inputs. This combination allows the microcontroller to control switched-mode power stages while managing communications and supervisory functions. The 100-pin LQFP package exposes substantially more I/O than smaller MCU packages, allowing dedicated signals for power-control loops, communications, diagnostics, and machine interfaces while preserving an exposed thermal pad for heat spreading. Typical applications include industrial Ethernet controllers, programmable logic controllers, digital power supplies, motor-control and inverter equipment, factory automation nodes, industrial communication gateways, and embedded data-acquisition systems. The 10/100 Ethernet capability is particularly suitable for legacy industrial networks, while the 150 ps PWM resolution supports high-resolution power-conversion control. PCB design should prioritize a low-impedance ground plane, careful routing of power-stage signals, and effective decoupling around the 3.3 V supply pins. The exposed pad must be connected to the appropriate ground-plane area according to the manufacturer’s land-pattern guidance. Ethernet traces require controlled topology and return-path continuity to minimize reflections and susceptibility to common-mode noise. This product page combines manufacturer specifications with practical design guidance, packaging information, and pin-compatible alternatives for engineering evaluation. It helps designers assess whether the 120 MHz Cortex-M4 core, 512 kB flash, 10/100 Ethernet support, 150 ps PWM resolution, and PG-LQFP-100 footprint fit an industrial control or digital power-conversion design before committing the exact ordering code to a BOM.

RFQ تماس
XMC4400F100K512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F100K512BAXUMA1

XMC4400F100K512BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F100K512BAXUMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and 10/100 Ethernet connectivity, housed in a PG-LQFP-100-11 package. It belongs to the XMC4000 family and combines a high-performance Cortex-M4 core with embedded communications and industrial-oriented peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communications interfaces, timers, analog inputs, and digital I/O into one device. The XMC4000 family is designed for embedded control systems where local processing, deterministic peripherals, and industrial communication are important. The XMC4400F100K512BAXUMA1 is suitable when a design requires 512 KB of program storage, 32-bit processing, and Ethernet in a 100-pin surface-mount package. The device provides a 120 MHz ARM Cortex-M4 core, 512 KB flash, and 10/100 Ethernet according to the Infineon product-page description. The 32-bit architecture supports efficient handling of networking stacks, control algorithms, and multiple peripheral tasks. Its PG-LQFP-100-11 package provides a large pin count for external signals and is compatible with conventional PCB assembly methods. The ordering code also indicates a tape-and-reel shipping format. The XMC4000 platform is intended for industrial embedded applications, including connected control equipment, industrial Ethernet nodes, motion and automation controllers, and communication-oriented embedded systems. The integrated Ethernet capability can reduce the need for a separate network controller when the system requires 10/100 Ethernet connectivity. The 512 KB flash capacity allows firmware, configuration data, and application logic to be stored locally. Designers should use the Infineon XMC4400 datasheet for the complete electrical characteristics, memory map, peripheral multiplexing, pin definitions, package dimensions, and recommended operating conditions. PCB design should preserve the specified decoupling, clock, Ethernet routing, and ground-return requirements. Software development should use the corresponding XMC4000 peripheral library, startup files, linker configuration, and device headers for the exact ordering designation. This page provides a structured engineering summary of the XMC4400F100K512BAXUMA1, including its core, memory, package, interface, application fit, procurement considerations, and verified Infineon documentation links. It is intended to support design review, sourcing, and board-level planning for industrial embedded systems.

RFQ تماس
XMC4400F64F256ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256ABXQMA1

XMC4400F64F256ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4400F64F256ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 256 KB of embedded flash and an Ethernet MAC, housed in a 64-pin LQFP package with an exposed pad. It is designed for industrial embedded systems requiring deterministic real-time control, high-speed serial connectivity, and integrated Ethernet communication. The device operates from a 3.3 V supply according to its ordering designation. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. Within the product hierarchy, the XMC4400 is an ARM Cortex-M4 MCU, an embedded processor within the XMC4000 family. It combines real-time control performance with industrial peripherals, allowing one device to supervise sensors, execute control algorithms, and exchange data through Ethernet or serial interfaces. The principal features visible in the ordering information include a 120 MHz Cortex-M4 core, 256 KB of flash memory, a 3.3 V operating supply, and an Ethernet MAC. The 32-bit RISC architecture supports compact, efficient embedded software, while the integrated Ethernet MAC provides a dedicated path for network-connected industrial equipment. The LQFP-64 exposed-pad package also provides a substantial underside thermal and ground connection for designs requiring improved electrical and thermal performance. The XMC4400F64F256ABXQMA1 belongs to the industrial XMC4000 product class, making it suitable for control platforms that require both deterministic operation and communications. The 256 KB flash capacity supports embedded boot code, configuration data, and application firmware in a single-controller design. Its 120 MHz operating rate provides additional timing margin for protocol processing, digital signal handling, and supervisory control tasks. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, connected sensor gateways, industrial communication equipment, and embedded measurement systems. In these systems, the MCU can execute real-time control loops while the Ethernet MAC manages networked communication without requiring a separate network controller. PCB implementation requires correct assignment of the 3.3 V supply, decoupling, clock, reset, debug, and communication signals according to the manufacturer pin-description table. The exposed pad should be connected to the intended ground plane and thermally sized for the final board stack-up. Firmware should also validate operating limits, peripheral clock configurations, and Ethernet physical-layer requirements before field deployment. This page combines the manufacturer ordering information with practical application guidance, package considerations, and a parameter-focused comparison with members of the XMC4400 family. These engineering details help designers distinguish flash-density or ordering-code changes from changes that require PCB or firmware modification.

RFQ تماس
XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256BAXQMA1

XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 256 KB of embedded Flash memory, and a 100-pin PG-LQFP surface-mount package. It belongs to the XMC4000 microcontroller family and combines a high-resolution PWM unit, analog and digital peripherals, and Ethernet MAC capability in one industrial control device. The orderable designation indicates an industrial temperature option and 256 KB Flash configuration. An industrial microcontroller is a semiconductor device designed to execute embedded control software under real-time operating conditions. The XMC4400 follows the hierarchy of microcontroller, embedded processor, and industrial semiconductor. Its ARM Cortex-M4 processing architecture provides a 32-bit execution environment for motor control, communications, industrial automation, and connected equipment. Unlike a general-purpose desktop processor, it is intended for deterministic control of sensors, actuators, communication links, and safety-oriented peripheral functions. The verified manufacturer information identifies an operating frequency of up to 120 MHz, 256 KB of Flash, and an Ethernet MAC as principal device attributes. The XMC4400 also incorporates Infineon's high-resolution PWM capability, whose published resolution reaches 150 ps. These features support applications that benefit from precise timing, fast control-loop execution, and deterministic peripheral interaction without requiring a separate high-resolution PWM device. Technical implementation uses the ARM Cortex-M4 core within the XMC4000 architecture and integrates memory, communications, timing, analog, and debugging resources into a single device. Flash provides 256 KB for firmware and application code, while SRAM requirements and other memory details remain dependent on the complete ordering designation and datasheet tables. The PG-LQFP-100 package is a 100-pin plastic surface-mount package suited to multilayer industrial control boards where a fine-pitch leaded package is preferred over a ball-grid array. Typical uses include industrial Ethernet equipment, motor and power conversion controllers, factory automation nodes, building automation interfaces, and embedded communication platforms. For networking products, the integrated Ethernet MAC reduces the need for external media-access control, although a suitable Ethernet PHY and magnetic interface are still required. For motor control, the high-resolution PWM unit supports precise edge placement and timing while the 120 MHz Cortex-M4 core handles supervisory control and communications tasks. Designers should preserve the pin assignments and power conditions defined for the PG-LQFP-100 ordering designation, use the manufacturer's recommended decoupling and clock configuration, and verify Ethernet transceiver requirements before layout. Software validation should include clock-tree, reset, startup, and peripheral-instance verification. PCB thermal and signal-integrity reviews are essential when high-speed communication, switching outputs, or adjacent sensitive analog circuitry share the board. This product record consolidates verified manufacturer and distributor information, pin-package identification, pricing status, application guidance, and transparent engineering comparisons. It also distinguishes verified facts from parameters that require confirmation in the complete manufacturer datasheet, helping engineers accelerate sourcing without presenting unverified electrical limits as design guarantees.

RFQ تماس
XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512ABXQMA1

XMC4400F64F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512ABXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and Ethernet MAC capability, in a 64-pin PG-LQFP surface-mount package. It belongs to the XMC4000 family and combines a Cortex-M4 processor core with embedded DSP instructions, flash memory, Ethernet connectivity, and industrial-oriented peripherals. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one component. Within the product hierarchy, the XMC4400F64F512ABXQMA1 is an Arm Cortex-M4 microcontroller, part of the XMC4000 family, and an industrial embedded-control IC. This combination makes it appropriate for compact control systems that require deterministic real-time execution alongside an Ethernet-capable communications architecture. The principal device characteristics include a 120 MHz CPU frequency, 512 KB of flash organized as 512K × 8, 32-bit processing, and a 64-pin PG-LQFP package. The industrial ordering designation XMC4400-F64F512-BA identifies the XMC4400, 120 MHz core, 512 KB flash configuration, and industrial grade. The Arm Cortex-M4 core includes a built-in DSP instruction set, supporting efficient fixed-point signal-processing operations without requiring a separate DSP in suitable control systems. Ethernet MAC capability differentiates this device from basic general-purpose microcontrollers and makes it relevant to industrial networking, connected automation, and embedded communications equipment. The exact peripheral mix, RAM configuration, electrical limits, and pin functions must be confirmed in the XMC4400 manufacturer datasheet before schematic capture or firmware deployment. The XMC4000 family documentation also covers derivative-specific ordering information, electrical characteristics, package details, and errata. Typical applications include industrial Ethernet controllers, motor-control platforms, factory automation nodes, CAN-connected equipment, embedded gateways, and real-time sensor-processing systems. In these designs, the 120 MHz Cortex-M4 core executes control logic while the DSP instruction set accelerates suitable filtering, signal transformation, and modulation workloads. The 512 KB flash capacity provides room for an embedded application, protocol stacks, configuration data, and boot code within a single device. PCB design should account for the 64-pin LQFP footprint, exposed thermal and routing requirements, power-supply decoupling, Ethernet signal integrity, and programming access. Firmware projects should verify startup behavior, interrupt-vector configuration, peripheral availability, and pin multiplexing against the exact ordering code. A hardware redesign should not be attempted unless the alternative device has the same package, pinout, power architecture, peripheral mapping, and software-support requirements. This product summary combines the manufacturer ordering information, distributor identification, datasheet references, and engineering guidance for XMC4400F64F512ABXQMA1. It also highlights practical selection, comparison, application, and sourcing questions that help engineers determine whether the 120 MHz Cortex-M4 architecture and 512 KB flash configuration match the intended industrial embedded design.

RFQ تماس
XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512BAXQMA1

XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller rated at 120 MHz, with 512 KB of flash memory and a 64-pin TQFP exposed-pad package. It is a 3.3 V industrial member of the XMC4000 family that combines a floating-point and DSP-capable processor core with Ethernet MAC, CAN, high-resolution PWM, and other industrial peripherals. An MCU is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one die. The ARM Cortex-M4 is a 32-bit processor architecture within the broader microcontroller and embedded-semiconductor hierarchy. It supports real-time control tasks that require deterministic peripheral access, while the XMC family adds Ethernet and CAN connectivity commonly used in industrial automation, networking, motor-control, and communications equipment. Key verified features include a 120 MHz operating frequency, 512 KB of flash, and a 64-pin PG-TQFP-64-19 surface-mount package. The device also includes a 150 ps high-resolution PWM capability, an Ethernet MAC, CAN interfaces, an FPU, DSP instructions, and a common-ground architecture. In packages with an exposed die pad, Infineon requires the pad to be connected to the common ground alongside the VSS, VSSA, and VSSO pins. The Cortex-M4 architecture is suitable for floating-point control algorithms and fixed-point signal processing, while the XMC peripheral set reduces the need for external interface devices. Ethernet MAC support can simplify industrial Ethernet connectivity, and CAN provides a robust option for distributed automation and vehicle or industrial control networks. The high-resolution PWM unit is especially relevant to precise timing, digital-to-analog conversion, and motor-control applications. Typical uses include industrial Ethernet controllers, factory automation nodes, CAN-connected motor systems, power-conversion equipment, and embedded communications platforms. At 120 MHz, the MCU has sufficient processing capacity for protocol handling and real-time control, but designers should evaluate interrupt latency, peripheral timing, memory bandwidth, and thermal conditions for each system. The exposed pad requires careful PCB layout and an adequate ground plane. The package must be soldered according to Infineon's land-pattern and reflow guidance, while the exposed die pad and all ground pins must be tied to the common ground. The 150 ps PWM resolution should also be checked against the timer clock and required output timing rather than treated as a universal system timing guarantee. This page consolidates verified distributor and manufacturer information, package characteristics, functional applications, and cross-reference candidates. The available data identifies only a limited number of same-package alternatives; their temperature-grade, ordering-code, and detailed electrical differences should be confirmed against the Infineon ordering information before production substitution.

RFQ تماس
XMC4400F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K256ABXQSA1

XMC4400F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K256ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller with a 120 MHz operating frequency, 256 KB of flash memory, 80 KB of RAM, and a 3.3 V supply in a 64-pin PG-LQFP package with an exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller control with a high-performance 32-bit processor core. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and GPIO into one device. The XMC4400F64K256ABXQSA1 sits within the hierarchy of embedded controller, 32-bit microcontroller, ARM Cortex-M4 microcontroller, and single-chip control IC. It is intended for systems that need more computing capability and memory than a basic 8-bit or 16-bit controller without moving to a complex application processor. Principal features include a 120 MHz ARM Cortex-M4 core, 256 KB of flash program memory, 80 KB of SRAM, and operation from a 3.3 V supply. The 64-pin LQFP package exposes a practical mix of digital I/O and embedded peripherals while providing an exposed thermal pad for improved heat spreading on multilayer PCBs. The automotive-grade ordering designation indicates suitability for demanding industrial or automotive control environments when the full ordering information and qualification requirements are confirmed for the assembled system. Technically, the Cortex-M4 architecture supports efficient real-time control through its instruction set, interrupt handling, and integrated peripherals. This makes the device appropriate for deterministic control loops that combine sensor acquisition, communications, and actuator timing. Its 256 KB flash provides room for application code, configuration data, and boot logic, while the 80 KB SRAM supports working state, buffers, stacks, and peripheral data movement without relying on external memory in many designs. Typical applications include industrial motor and motion control, automotive body and auxiliary control, robotics, building automation, embedded instrumentation, and connected industrial equipment. In each case, the processor can execute control logic while dedicated peripherals handle communication, timing, and digital input or output. A design using the XMC4400F64K256ABXQSA1 should confirm pin multiplexing, peripheral availability, clock configuration, and startup requirements against the manufacturer datasheet. PCB implementation should preserve the electrical and thermal requirements associated with the exposed-pad LQFP. Place the device according to the package land pattern, connect the exposed pad to the appropriate ground plane, provide the specified decoupling capacitors, and route high-speed or sensitive signals away from noisy power-conversion stages. Automotive and safety-related designs also require a complete review of the ordering code, temperature grade, errata, and applicable qualification documentation. This page consolidates the verified XMC4400F64K256ABXQSA1 specifications, sourcing information, replacement analysis, and practical implementation guidance. It helps engineers evaluate the device against the XMC4000 series and identify whether a PCB, firmware, or qualification change is required before selecting a replacement.

RFQ تماس
XMC4400F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K256BAXQMA1

XMC4400F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K256BAXQMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller with a 120 MHz maximum clock, 256 KB of flash memory, 80 KB of SRAM, and a 64-pin PG-LQFP-64-19 package. The ordering code identifies the 256 KB flash configuration, 256 KB-class memory organization, industrial qualification, 3.3 V supply, and tray packaging. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. The XMC4400 belongs to the XMC4000 family of 32-bit Arm Cortex-M4 microcontrollers, combining real-time control capability with Ethernet communications and a high-resolution PWM architecture. Its memory hierarchy supports connected industrial equipment, distributed control nodes, and compact embedded automation systems. Key features include a 120 MHz Arm Cortex-M4 processor, 256 KB flash, 80 KB SRAM, 10/100 Ethernet, and a high-resolution PWM unit with 150 ps resolution. The 64-pin LQFP package provides a practical surface-mount form factor for industrial controller designs. A 3.3 V operating supply and single-core 32-bit architecture simplify system integration while supporting deterministic control and communication workloads. The XMC4400 architecture uses an Arm Cortex-M4 processor with integrated digital signal processing capabilities. Its high-resolution PWM unit supports accurate timing, motor-drive modulation, and power conversion control, while the Ethernet interface enables network-connected industrial equipment. The manufacturer describes the device as an industrial MCU and identifies the XMC4400-F64K256-BA as having 256 KB flash, 80 KB SRAM, and 10/100 Ethernet capability. Typical applications include industrial Ethernet controllers, programmable automation equipment, motor-control systems, power-conversion controllers, sensor-hub platforms, and embedded network gateways. Its combination of real-time processing, Ethernet connectivity, and precise PWM timing makes it appropriate for machinery that must execute control algorithms while exchanging data with supervisory systems. Designers should treat all 64 package pins as electrically significant and follow the complete pin-description and package information in the manufacturer datasheet. For mixed-signal or high-speed Ethernet layouts, preserve the recommended separation, grounding, and decoupling arrangement. Firmware validation should also include startup behavior, Ethernet timing, peripheral pin multiplexing, and worst-case operating conditions. This product page combines the manufacturer's electrical and ordering information with practical integration guidance, application fit, package details, and like-for-like replacements. It is intended to help engineers assess the XMC4400F64K256BAXQMA1 against other XMC4400 memory configurations without overlooking firmware, pin-multiplexing, and qualification differences.

RFQ تماس
XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512ABXQSA1

XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4400F64K512ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and a 64-pin PG-LQFP-19 package with an exposed pad. The device belongs to the XMC4000 family and supports a 3.3 V operating voltage. Its combination of a Cortex-M4 core, substantial embedded flash, Ethernet MAC capability, and a 64-pin industrial package makes it suitable for connected industrial automation, communications, and real-time control systems. A microcontroller such as the XMC4400F64K512ABXQSA1 integrates a processor core, embedded nonvolatile program memory, SRAM, peripherals, and communication interfaces into one semiconductor package. Within the device hierarchy, it is an Arm Cortex-M4 MCU, a 32-bit microcontroller and embedded processor. The XMC4000 family combines deterministic real-time control with Ethernet-oriented connectivity, allowing one device to manage machine control tasks and networked communication functions. The key specifications are a 120 MHz maximum CPU frequency, 512 KB of flash organized as 512K × 8 bits, and a 64-pin PG-LQFP-19 package. Infineon identifies the related XMC4400-F64K512-BA ordering designation as an industrial Arm Cortex-M4 MCU with Ethernet MAC. The suffix used for the complete ordering code also identifies the package, temperature class, and other ordering options, so engineers should preserve the full MPN when procuring or redesigning a PCB. The Cortex-M4 architecture uses the ARM instruction set and is suitable for interrupt-driven embedded workloads. Its 120 MHz operating point provides substantially more processing headroom than lower-frequency general-purpose MCUs, while 512 KB of flash permits larger application code, boot code, communication stacks, and field-update routines on the same die. Peripheral details, clock configurations, memory sizes beyond flash, and electrical limits must be confirmed in the XMC4400 manufacturer datasheet and its derivative-device ordering information. Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensors, motor-control supervisory systems, and industrial communications gateways. The Ethernet MAC makes the MCU particularly relevant where local control and network connectivity must share one platform. It can also support secure serial or fieldbus communication designs when the appropriate peripherals and external transceivers are used, although the exact interface mix for this derivative must be checked in the device documentation. PCB design should preserve the exposed-pad connection specified for the PG-LQFP-19 package and follow the manufacturer’s land-pattern and thermal-land guidance. The 120 MHz processing capability requires careful clock, decoupling, and signal-integrity planning, while the Ethernet interface demands controlled routing and appropriate external network components. Do not assume that an MCU with the same package is electrically interchangeable; validate supply limits, peripheral mapping, pin multiplexing, boot behavior, and software-device configuration before substitution. This product record combines the manufacturer ordering information, family datasheet characteristics, package details, lifecycle indication, and practical design guidance. It also distinguishes true drop-in replacements from merely similar controllers, helping engineers assess PCB reuse, firmware impact, sourcing status, and qualification requirements without treating package similarity as proof of compatibility.

RFQ تماس
XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512BAXQMA1

XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 80 KB of RAM, and an Ethernet MAC, all housed in a 64-pin LQFP package. The XMC4400 combines a high-performance microcontroller core with advanced motor-control peripherals, including a high-resolution PWM unit capable of 150 ps resolution. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor in the microcontroller family, where the Arm Cortex-M core sits between a general-purpose microprocessor and a highly integrated embedded control device. The XMC4400 belongs to Infineon's XMC4000 industrial microcontroller family, combining real-time digital control with communication and analog-adjacent peripheral functions on one integrated circuit. Key device features include a 120 MHz Cortex-M4 core, 512 KB of program flash, 80 KB of RAM, an integrated Ethernet MAC, and a 64-pin PG-LQFP package. The 150 ps high-resolution PWM capability supports precision timing in motor-control and power-conversion systems. The combination of Ethernet connectivity and deterministic control peripherals makes the device suitable for industrial automation, networking, and embedded motor-control designs. Technically, the XMC4400 integrates an ARM Cortex-M4 processor with Infineon's peripheral set. Its high-resolution PWM and advanced timer architecture are intended to reduce the need for external timing and signal-generation components. The Ethernet MAC supports network-oriented industrial equipment, while the flash and RAM capacities provide sufficient space for control firmware, communication stacks, and application logic. Typical applications include industrial Ethernet controllers, servo and motor drives, programmable logic controllers, industrial communication modules, and embedded automation equipment. The 120 MHz processing rate supports responsive control loops, while the Ethernet MAC provides a path to connected factory networks. System designers must still verify peripheral assignments, package dimensions, pin multiplexing, and operating limits against the complete manufacturer datasheet before schematic release. A primary design consideration is firmware and peripheral planning. Because the LQFP-64 package exposes a finite number of pins, pin multiplexing, analog functions, debug access, clock configuration, and Ethernet connectivity must be assigned early. PCB designers should also follow the manufacturer's recommended decoupling, exposed-pad, and high-speed layout guidance before a new board is fabricated. This product data combines the verified manufacturer and distributor information with practical comparison notes and engineering guidance that are not presented as a substitute for the complete Infineon XMC4400 datasheet. Exact electrical characteristics, pricing, lead time, lifecycle status, and package details should be confirmed against the latest manufacturer documentation and distributor records.

RFQ تماس
XMC4402F100F256ABXQMA1 - 120MHz 256KB MCU | Infineon
XMC4402F100F256ABXQMA1

XMC4402F100F256ABXQMA1 - 120MHz 256KB MCU | Infineon

Infineon Technologies XMC4402F100F256ABXQMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 256 KB of embedded flash and housed in a 100-pin PG-LQFP-11 package. It operates from a 3.3 V supply and includes Ethernet MAC connectivity, positioning it for connected industrial equipment that requires deterministic real-time control alongside network communication. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor used to execute control software, monitor sensors, operate communication peripherals, and manage real-time system tasks. The Cortex-M4 architecture belongs to the embedded microcontroller hierarchy rather than application processors or DSPs. It combines instruction-efficient processing, interrupt-driven peripherals, and deterministic peripherals in a device designed for industrial embedded control and connected automation. The XMC4402F100F256ABXQMA1's principal characteristics are its 120 MHz operating frequency, 256 KB flash memory, and integrated Ethernet MAC. Flash retains firmware without a separate external memory device, while the Ethernet MAC supports network-connected designs. The 100-pin LQFP package exposes the microcontroller's digital interfaces and analog and connectivity functions through a relatively high pin count, making it practical for medium-complexity industrial control boards. The XMC4000 architecture is organized around an Arm Cortex-M4 core and dedicated peripherals for embedded control and communications. Its Ethernet capability makes it especially relevant to industrial Ethernet equipment, factory automation controllers, networked sensor hubs, and embedded gateways. Firmware can divide the device between control-loop execution and network protocol handling, reducing the need for separate interface devices when the application does not require higher protocol-processing performance. Typical uses include industrial Ethernet controllers, programmable automation modules, building automation equipment, networked sensor interfaces, and compact machine-control systems. The combination of 120 MHz processing, 256 KB flash, and Ethernet MAC makes the part suitable for products that must respond to local inputs while also exchanging status, configuration, or diagnostic data over a network. PCB design should preserve the package's thermal and electrical requirements, including careful decoupling, a stable 3.3 V supply, and compliant handling of high-speed Ethernet signals. Confirm the exact pin assignments, peripheral multiplexing, and clock configuration in the Infineon product documentation before finalizing board connections. Software development should likewise validate the selected peripheral instance, interrupt routing, and Ethernet PHY interface against the system requirements. This product summary combines the confirmed XMC4402F100F256ABXQMA1 characteristics with practical selection, comparison, and design guidance. It highlights the processor core, memory configuration, package, Ethernet capability, likely industrial applications, and the limitations that must be checked before treating another microcontroller as a drop-in replacement.

RFQ تماس