محصولات (21,000+)

Z86C9333VSG - 8-Bit 33MHz ROMless MCU | IXYS
Z86C9333VSG

Z86C9333VSG - 8-Bit 33MHz ROMless MCU | IXYS

The IXYS Z86C9333VSG is an 8-bit, 33 MHz ROMless Z8-series microcontroller packaged in a 44-lead J-leaded LCC measuring 16.6 mm by 16.6 mm. It operates from a 4.5 V to 5.5 V supply and is intended for embedded control systems requiring an external memory interface, compact surface-mount construction, and a moderately high operating clock. A microcontroller is a programmable semiconductor that integrates a CPU, memory interfaces, I/O ports, timers, and peripheral functions on one device. The Z8 family belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, semiconductor integrated circuits, and electronic control components. A ROMless configuration means the device does not contain its final program storage internally; an external memory device is therefore part of the complete embedded design. Key characteristics include the 8-bit CPU architecture, 33 MHz maximum clock, ROMless program-memory architecture, and 4.5 V to 5.5 V operating supply. Its 44-LCC J-lead package supports compact industrial, consumer, and embedded-control assemblies without relying on a fine-pitch BGA package. The package is identified as surface-mount technology and uses J-shaped terminals designed for board attachment and mechanical inspection. The device is specifically described as a Z8-series microcontroller and as an embedded controller. Its operating architecture allows firmware and data to be organized in external memory, which can provide flexible field-programmable behavior, reusable platform designs, and separation between application code and the microcontroller package. At 33 MHz, the processor is suited to control loops, human-interface tasks, protocol handling, and supervisory functions that require more scheduling headroom than a basic low-speed microcontroller. Typical applications include industrial machine controls, instrumentation panels, motor and actuator supervisory systems, building-control interfaces, programmable logic controllers, and compact embedded control products. The 4.5 V to 5.5 V supply range is suitable for regulated 5 V system rails. Designs should provide suitable external program and data memory, power decoupling, oscillator circuitry, and a reset arrangement appropriate to the selected Z8 memory interface. The primary engineering consideration is that ROMless operation requires additional memory and careful bus implementation. Place the external memory, controller, and associated routing as a coordinated subsystem, following the pin-description and reference-circuit guidance in the manufacturer datasheet. Confirm signal timing and memory-map compatibility before PCB release because the CPU clock, external memory access, and I/O behavior must operate as one consistent design. This page consolidates verified package, clock, supply, architecture, and lifecycle information into an engineering-oriented product record. It also separates confirmed Z86C9333VSG characteristics from unresolved memory and peripheral details, compares related Z8 devices, and highlights practical verification steps for external-memory, decoupling, and pinout decisions.

RFQ تماس
Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog
Z86C9533VSC

Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog

Zilog Z86C9533VSC is a CMOS Z8 microcontroller with an embedded digital signal processor, combining general-purpose microcontroller control with dedicated DSP processing in a 84-pin leadless chip carrier package. It belongs to the Z8 family of highly integrated embedded controllers designed for applications requiring both digital control and real-time signal processing. The Z86C95 architecture is ROMless, allowing program storage and boot code to be implemented in external memory. A digital signal processor, commonly abbreviated as DSP, is a semiconductor architecture optimized for operations used in signal processing, including multiplication, accumulation, filtering, waveform generation, and spectral analysis. The Z8 MCU hierarchy combines a conventional embedded-control environment with an embedded DSP engine. This integration can reduce the need for separate processor packages when a system must perform control functions and process sampled or generated signals concurrently. The principal identifiable features of the Z86C9533VSC are its CMOS construction, Z8 single-chip microcontroller architecture, embedded DSP processor, ROMless configuration, and 84-pin LCC package. Its integration is useful when a product needs deterministic embedded control alongside digital signal-processing functions. Exact processor clock, memory, I/O, electrical limits, temperature range, and package dimensions must be confirmed against the manufacturer datasheet before schematic capture or firmware development. The Z86C9533VSC belongs to the Z86C95 MCU family, which combines microcontroller functionality with an embedded DSP processor. A ROMless architecture generally requires external program memory, so designers should plan the memory interface, reset behavior, bus timing, and firmware loading method as an integrated part of the system architecture rather than treating memory as an afterthought. Firmware development also requires the correct Z8 toolchain, device programming method, interrupt configuration, and peripheral initialization sequence. Typical uses include digital audio and communications, industrial signal conditioning, motor and motion control, communications equipment, and embedded systems that combine a control loop with real-time waveform processing. The LCC-84 format provides many external connections compared with a small leaded microcontroller package, making it suitable for systems requiring multiple peripheral, bus, and control signals while still allowing board-level miniaturization. PCB implementation requires careful attention to exposed-pad or thermal requirements if present, supply decoupling, signal integrity, and programming access. Because this is a fine-pitch leadless package, verify land geometry and assembly tolerances against the manufacturer package drawing. A new design should also confirm peripheral multiplexing and pin assignments in the datasheet rather than inferring them from the larger Z8 family. This product page organizes the available Z86C9533VSC identity, packaging information, sourcing path, and engineering considerations. It also separates documented facts from unverified numeric details, helping engineers move from part selection to datasheet verification without relying on assumptions about clock speed, memory size, or electrical performance.

RFQ تماس
Z86C9620PSC - 20MHz ROMless 8-Bit Z8 MCU | Zilog | 64-Pin SDIP
Z86C9620PSC

Z86C9620PSC - 20MHz ROMless 8-Bit Z8 MCU | Zilog | 64-Pin SDIP

The Zilog Z86C9620PSC is a CMOS 8-bit Z8 microcontroller that operates at up to 20 MHz, uses a ROMless architecture requiring external program memory, and is supplied in a 64-pin rectangular SDIP through-hole package in the commercial temperature grade. The device belongs to Zilog's Z8 family of Z80-derived controllers, which combine an 8-bit CPU core with on-chip peripherals and external code/data memory interfaces. The "PSC" ordering code identifies the plastic 64-pin DIP outline, the commercial temperature range, and the surface-mount-compatible leadless-free pin count used in through-hole industrial and commercial control boards. A microcontroller is a complete single-chip computer: it integrates a CPU core, non-volatile program storage, RAM, timers, serial interfaces, and I/O ports on one die. Within the Z8 family the key architectural option is "ROMless", meaning the device contains no internal program memory and instead fetches code from an external EPROM or Flash memory chip through the address/data bus. That choice frees board space and lets the designer select code density independently, at the cost of one or two extra memory components and bus routing complexity. Key features of this part include a 20 MHz maximum clock frequency, an 8-bit CMOS CPU core, a 64-pin through-hole package that is easy to hand- and machine-solder, and a broad set of on-chip I/O and timer resources typical of the Z8 line. Because the Z8 core is a Z80 derivative, existing Z80 assembler toolchains and Z8 application notes can be reused, shortening the learning curve for teams migrating from legacy 8-bit designs. Architecturally, the Z86C9620 combines a pipelined 8-bit CPU with an external bus capable of addressing external code and data memory, plus dedicated port pins, timer/counter blocks, and serial peripheral interfaces. Clocking is externally supplied, so a crystal or oscillator network is required to reach the 20 MHz operating point; the maximum frequency is a datasheet limit rather than a guaranteed operating point for every peripheral configuration. Run-time behaviour depends on the external memory map, so the same silicon can serve very different products purely through firmware and memory sizing. Typical deployments include industrial control panels, burner or programming stations, appliance controllers, HVAC and building-automation modules, motor and relay sequencers, instrument front panels, and legacy equipment retrofits where a 20 MHz 8-bit CPU with external program memory is sufficient. Because the package is a through-hole SDIP, the part is also well suited to prototypes and small production runs assembled on through-hole assembly lines. The main design consideration for this controller is external memory: the board must provide a working EPROM or Flash device with a stable address and data bus, correct wait-state timing if the memory is slower than the CPU, and decoupling close to the memory pins. Because the 64-pin DIP footprint exposes both address and data lines, board layout must keep the bus short and clean, and unused port pins should be tied to defined levels so that reset behaviour stays deterministic.

RFQ تماس
Z86C9620VSC - 20MHz ROMless 8-Bit MCU | Zilog
Z86C9620VSC

Z86C9620VSC - 20MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9620VSC is a Z8 ROMless 8-bit microcontroller operating at up to 20 MHz in a 68-pin PLCC package. The device provides 16 Kbytes of ROM-family program space and 256 bytes of RAM according to the Z86C61/62/96 microcontroller family description. Its key characteristics are the 8-bit architecture, 20 MHz operating frequency, ROMless configuration, and 256-byte RAM. The Z86C9620VSC is intended for embedded control designs that require external program memory while retaining the compact timing and peripheral resources associated with the Z8 family. A ROMless microcontroller is an 8-bit MCU architecture in which the application program is stored in external memory rather than embedded ROM. The Z86C9620VSC is part of the Zilog Z8 single-chip microcontroller family, which sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor categories. External program memory allows the implementation to use the MCU with a separate memory device, a configuration useful for products whose firmware size or update requirements differ from a fixed-ROM design. The most important engineering features are the 20 MHz maximum operating frequency, 8-bit CPU, ROMless organization, 16 Kbytes of ROM-family capacity, and 256 bytes of RAM. These specifications make the device suitable for embedded control, industrial interface, appliance control, and legacy peripheral-control designs. The PLCC package provides a 68-pin mechanical format and is intended for through-hole board assembly rather than a compact surface-mount land pattern. The Z8 architecture provides a simple execution environment for control logic, timers, serial communication, and peripheral interfacing. Because the device is ROMless, the external memory interface and associated address, data, and control routing are central to the hardware design. Board designers should use the manufacturer pin-description table when assigning signals, because the exact peripheral mapping and alternate-function details for the selected package must be followed precisely. Typical applications include industrial equipment controllers, legacy communication adapters, printer and appliance control boards, embedded instrumentation, and system-control modules. The 20 MHz clock rate provides more timing headroom than slower general-purpose 8-bit controllers, while the 256-byte RAM supports short working buffers, state variables, and stack-intensive control routines. External program memory is the principal tradeoff compared with a ROM-equipped MCU. For a new PCB, preserve the 68-pin PLCC footprint and route the external memory bus away from sensitive analog or communication nodes. Confirm the oscillator, reset, power, programming, and memory interface requirements against the manufacturer datasheet. If software or production tooling depends on a specific Zilog toolchain, validate tool and programmer support before committing to the device. This page combines the Z86C9620VSC device identity, package information, engineering selection guidance, practical design notes, and verified manufacturer-family references for embedded product planning. Use the exact Z86C9620VSC ordering code and the manufacturer datasheet for production release, programming, and manufacturing documentation.

RFQ تماس
Z86C9620VSG - 20MHz ROMless 8-Bit MCU | Zilog | PLCC-68
Z86C9620VSG

Z86C9620VSG - 20MHz ROMless 8-Bit MCU | Zilog | PLCC-68

The Zilog Z86C9620VSG is a Z8 Z8 8-bit ROMless microcontroller operating at a core speed of 20 MHz. It is packaged in a 68-pin PLCC surface-mount package and is designed for embedded control systems requiring numerous general-purpose I/O pins, external memory interfacing, and serial communications. The Z86C9620VSG provides 52 general-purpose I/O pins, 236 x 8 bytes of RAM, EBI/EMI connectivity, and UART/USART communication capability. Its operating supply range is 3 V to 5.5 V, supporting both 3.3 V and 5 V system designs. Because the device is ROMless, application code must be stored in external program memory or loaded through the system programming path defined by the Z8 family. The 20 MHz Z8 architecture provides substantially greater processing headroom than conventional 8-bit microcontrollers used in simple appliance controllers. The large PLCC-68 footprint is useful when a design requires many discrete digital signals while remaining serviceable and compatible with leaded-style assembly processes. The PLCC package also exposes the external bus and communication functions required by larger industrial control boards. Typical applications for the Z86C9620VSG include industrial automation equipment, motor and motion controllers, peripheral controllers, instrumentation interfaces, and legacy Z8 system upgrades. The EBI/EMI interface is particularly useful when the controller must communicate with external memory, data acquisition components, or custom peripherals. UART/USART connectivity supports service consoles, external transducers, and host-controller links. When designing around this device, confirm the external program-memory interface, programming method, pin multiplexing, and clock requirements against the manufacturer datasheet before layout release. Because the package is a 68-pin PLCC, the footprint, thermal exposure, and assembly process must be validated during PCB layout. This page also consolidates the confirmed device specifications, package information, application guidance, and drop-in replacement findings into one engineering reference.

RFQ تماس
Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog
Z86E0308PSG

Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog

The Zilog Z86E0308PSG is an 8-bit Z8 CMOS microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and support for 3.3 V or 5 V operation. It is packaged in an 18-pin PDIP. The device belongs to the Zilog Z8 family of small-format embedded microcontrollers designed for cost-sensitive control, monitoring, and simple peripheral-control applications. Its compact memory footprint, integrated digital control functions, and dual-voltage operation make it suitable for designs that need deterministic control without a larger application-specific processor. An OTP microcontroller stores programmed logic permanently, so the Z86E0308PSG is appropriate for finished products whose control firmware does not need field updates. The Z8 architecture uses an 8-bit instruction-oriented design and is commonly used for appliance controls, industrial interfaces, sensor conditioning systems, and embedded automation equipment. Its 3.3 V and 5 V capability helps designers support multiple supply environments without changing the controller family. The manufacturer identifies the Z86E0308PSG as an 8-bit MCU with 512-byte OTP memory and an 8 MHz maximum operating frequency. The 18-pin PDIP package provides a through-hole option for prototypes, educational designs, and production assemblies where leaded components are preferred. Because the exact peripheral allocation, electrical limits, pin names, and timing details are not listed in the retrieved product descriptions, engineers should use the Zilog Z86E03/E06 CMOS Z8 OTP Microcontrollers datasheet for the definitive pinout and timing reference. Typical implementations include simple motor and relay controllers, temperature and industrial monitoring units, keyboard interfaces, LED status panels, and low-cost embedded equipment. The 512-byte OTP limit is most suitable for compact control loops rather than protocol-heavy gateways, data logging, or applications requiring substantial RAM. In those designs, the MCU can handle discrete input decisions, timing, and peripheral coordination while external components provide sensing, actuation, communications, or power regulation. For a new layout, verify the 18-pin PDIP footprint, oscillator requirements, reset behavior, input thresholds, and programming procedure against the manufacturer datasheet before committing the PCB. Use the Request a Quote form on this page to request current commercial availability, lead time, and ordering information.

RFQ تماس
Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog
Z86E0308SSG

Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog

Zilog Z86E0308SSG is an 8-bit Z8 microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and a 3 V to 5.5 V supply range. The device is packaged in an 18-pin SOIC with a 300 mil body width for through-hole assembly compatibility. It combines a compact embedded-control footprint with OTP program memory for cost-sensitive, low-volume embedded products. An 8-bit microcontroller is a compact computing device designed to execute control logic, monitor inputs, and drive outputs within appliances, instruments, and industrial equipment. The Z86E0308SSG belongs to the Z8 microcontroller family, combining a processor core, OTP program memory, timers, and serial I/O in one package. This architecture suits sequential control tasks where deterministic behavior and low component count matter more than high-bandwidth processing. Principal characteristics include an 8 MHz clock, 512 bytes of OTP program memory, and operation across a 3 V to 5.5 V supply range. Its 18-pin SOIC-18-300mil package supports conventional PCB assembly and inspection. The industrial temperature classification, gull-wing terminal arrangement, and rectangular package geometry are useful constraints when laying out a new board or sourcing a mechanically similar replacement. The Z8 architecture is intended for embedded control rather than high-volume data processing. One-time-programmable memory makes the programmed version of the device suitable for products whose firmware does not require field updates. Because the memory cannot be rewritten after programming, production programming, blank-device handling, and firmware revision control must be planned before devices reach the assembly line. Typical uses include small appliance controllers, instrumentation front ends, industrial control modules, sensor interfaces, and dedicated timing or sequence-control products. In these applications, the MCU can evaluate digital inputs, operate timers, update displays, and communicate with external peripherals while keeping the external component count and board area modest. When designing a board, verify the exact pin assignments, port capabilities, oscillator requirements, and programming interface against the manufacturer datasheet before routing signals. The 300 mil SOIC body is wider than a narrow 150 mil SOIC, so component clearance, connector placement, and assembly tooling must accommodate the specified package rather than a generic 18-pin footprint. This page consolidates distributor specifications, package constraints, drop-in comparison information, and application-level engineering guidance. It also distinguishes documented parameters from values that must be confirmed with Zilog before schematic release, helping designers move from part selection to a controlled PCB and firmware implementation.

RFQ تماس
Z86E0408PEC - 8-Bit 1KB OTP Microcontroller | Zilog
Z86E0408PEC

Z86E0408PEC - 8-Bit 1KB OTP Microcontroller | Zilog

The Zilog Z86E0408PEC is an 8-bit Z8 microcontroller with 1KB of one-time-programmable program memory, 125 x 8 bits of RAM, 14 I/O pins, and an 8 MHz operating speed, packaged in an 18-DIP enclosure. Its compact architecture is intended for simple embedded-control tasks where a dedicated controller, limited program storage, and a modest peripheral set are sufficient. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, and supporting control logic on one integrated circuit. In the broader semiconductor hierarchy, the Z86E0408PEC belongs to the 8-bit microcontroller class and the Z8 family from Zilog. It is a general-purpose embedded controller rather than a dedicated analog, power, or communications component. The principal features visible in the manufacturer documentation are 1KB of one-time-programmable memory, 125 x 8 bits of RAM, and 14 available I/O lines. The 8 MHz operating speed provides the basic execution rate for control loops, input scanning, output updating, and simple state-machine logic. One-time-programmable memory is appropriate for products whose firmware is finalized before deployment and does not need field reprogramming. The Z8 architecture supports embedded product designs that need deterministic control, readable I/O organization, and low-complexity firmware. Because the device has only 1KB of OTP program memory, application code must be compact and carefully structured. Its 125-byte RAM limits buffered data and stack depth, so design decisions should account for call depth, variables, and any temporary state before code is committed to one-time-programmable memory. Typical uses include appliance controls, small industrial modules, simple sensor interfaces, building-control peripherals, and compact embedded products with discrete inputs and outputs. The 18-DIP package also supports through-hole prototyping and repair-friendly assembly. Because the exact peripheral complement, supply limits, and programming interface must be confirmed in the Zilog datasheet before layout release, a new design should not infer those details from the device family name alone. A key design practice is to validate oscillator, reset, programming, and I/O arrangements against the official pin description and application information before placing the PCB. Engineers should also reserve programming access and confirm the supported development environment. Once firmware size approaches the 1KB limit, reducing tables, nested calls, and unnecessary library code can preserve functional margin. This product record combines the Z86E0408PEC's documented memory, I/O, speed, and package characteristics with practical guidance on code-size planning, prototyping, and procurement. It is intended to help engineers identify the correct device quickly while clearly separating confirmed specifications from parameters that require confirmation from the manufacturer documentation.

RFQ تماس
Z86E0408SEC 8-Bit 8MHz 1KB OTP MCU | Zilog
Z86E0408SEC

Z86E0408SEC 8-Bit 8MHz 1KB OTP MCU | Zilog

Zilog Z86E0408SEC is an 8-bit embedded microcontroller operating at up to 8 MHz, with 1 KB of one-time-programmable program memory and an 18-pin SOIC package. The Z8 architecture combines a compact general-purpose MCU format with OTP program storage for cost-sensitive embedded control designs. An 8-bit microcontroller is a compact processing platform intended for control-oriented products that monitor inputs, operate actuators, and manage system functions through embedded software. Within the semiconductor hierarchy, the Z86E0408SEC belongs to the Z8 microcontroller family, an embedded processor and system-controller category designed for dedicated appliances, industrial controls, and simple electronic equipment. The principal device characteristics are an 8-bit CPU, an 8 MHz maximum clock, and 1 KB of OTP program memory. The 18SOIC package supports conventional surface-mount PCB assembly. OTP memory provides a secure one-time programming method for fixed firmware, which can simplify product configuration and prevent routine field reprogramming. Other electrical, timing, peripheral, environmental, and package dimensions require confirmation from the manufacturer datasheet before design release. Z8 devices are commonly evaluated for small control loops rather than high-throughput embedded processing. At an 8 MHz operating rate, the processor is suited to sequential logic, button and switch handling, status indicators, and supervisory functions. Firmware size and execution timing should be checked against the 1 KB OTP limit, while final timing margin must include peripheral setup and interrupt-handling overhead. Typical design uses include compact appliance controls, industrial interface modules, instrumentation peripherals, and small embedded controllers that require deterministic one-time-programmed firmware. The 18SOIC footprint is practical for through-board assembly and designs that favor a conventional small-outline package over a larger fine-pitch controller package. Design planning should begin with the pin description table, electrical limits, clock requirements, and programming procedure in the manufacturer datasheet. Confirm the operating-voltage range, available I/O count, oscillator configuration, reset requirements, and programming connector details before final schematic capture. PCB layouts should reserve space and isolation for the programming interface because OTP devices cannot be updated after programming. This product page consolidates the verified device identity, architecture, memory configuration, clock rate, package format, lifecycle information, sourcing workflow, and practical design guidance. It also distinguishes the documented Z86E0408SEC from unverified substitutes and explains why footprint-compatible alternatives require separate pin, function, memory, timing, and programming verification.

RFQ تماس
Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog
Z86E0412PEC

Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog

The Zilog Z86E0412PEC is an 8-bit CMOS Z8 one-time-programmable (OTP) microcontroller with 1KB (1K x 8) of OTP program memory, an operating frequency of 12 MHz, and an 18-pin PDIP through-hole package. It targets cost-sensitive, high-volume designs where a masked-ROM microcontroller would be uneconomic but where OTP simplicity still allows full software development, debug and prototyping. What is the Z8 MCU? A Z8 is an 8-bit RISC microcontroller core from Zilog that forms the basis of the Zilog MCU product family, sitting above the general class of 8-bit microcontrollers and below the broader embedded-controller category. ZiLOG positions these devices for consumer, automotive, security and HVAC applications where a small amount of code, low cost and simple one-time programming are the deciding factors. Key features of the Z86E0412PEC include 1KB of OTP ROM, 12 MHz maximum clocking, a Z8 CMOS CPU core with an internal oscillator and external crystal oscillator options, and a complete set of general-purpose I/O for sensing and driving. As an OTP device, the program memory is written once at the programming step, which removes the need for a masked-ROM order and sharply reduces unit cost in production volumes. The device is a standard Z86E04/E08 family member. Program development is typically performed on the same OTP silicon that ships in production, using the Z8 development tools and Zilog application notes for peripheral setup. Because it is OTP rather than flash, firmware changes after programming are not possible, so all functional qualification should be completed on production-intent units before the programming step. Typical applications include building-block security controllers, thermostat and HVAC control panels, appliance control boards, security keypad and access modules, motor and valve controllers, and simple consumer products with short, deterministic firmware. When designing around the Z86E0412PEC, respect the 18-pin PDIP footprint and the Z8 port mapping when allocating PCB tracks. Confirm oscillator component selection, reset behaviour and I/O drive capability against the pin descriptions in the manufacturer datasheet before layout is frozen. This page consolidates manufacturer documentation, distributor availability, drop-in replacement candidates, and practical design notes for the Z86E0412PEC, giving engineers a single reference for sourcing, pin assignment and second-source strategy.

RFQ تماس
Z86E0412PEG - 8-Bit 12MHz OTP MCU | Zilog
Z86E0412PEG

Z86E0412PEG - 8-Bit 12MHz OTP MCU | Zilog

Zilog Z86E0412PEG is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz, with 1 KB of one-time-programmable program memory, 125 bytes of RAM, and 14 I/O pins in an 18-pin DIP package. It is intended for compact control systems that require deterministic embedded control in a low-pin-count through-hole package. A microcontroller is a programmable semiconductor containing a processor core, program memory, data memory, and peripherals on one integrated circuit. The Z8 family combines an 8-bit CPU architecture with resources suited to appliance controls, industrial controllers, and small production systems. The Z86E0412PEG belongs to the one-time-programmable segment of this family, providing a practical path to firmware development and low-volume manufacturing without requiring a user-programmed flash-memory interface. The principal specifications include a 12 MHz maximum operating frequency, 1 KB of OTP program memory organized as 1K x 8, 125 bytes of RAM, and 14 I/O lines. Its operating supply range is 4.5 V to 5.5 V, while the specified temperature range extends from -40°C to +105°C. The DIP-18 package supports conventional through-hole PCB assembly and is useful when socketed prototyping, manual service, or legacy manufacturing processes are preferred. Its one-time-programmable architecture allows application firmware to be permanently written during production, providing a field-programmable appearance during development without a costly external programming interface. This is especially useful for small embedded products where the firmware does not need to be changed after deployment. Because OTP memory cannot be erased, revision control and production programming procedures should be planned carefully before a product reaches manufacturing. Typical applications include temperature or level control, small actuator controllers, appliance interfaces, discrete sensor-conditioning systems, and simple embedded control panels. The 14 I/O count provides useful connectivity for switches, indicators, relays, and digital sensors, while the 125-byte RAM can hold variables and short-lived state. Designers should verify peripheral availability, interrupt requirements, and timing behavior against the manufacturer datasheet for each selected function. The main design consideration is programming and validation. Develop the firmware on the target Z8 architecture, test production programming in a repeatable fixture, and verify every programmed image before release. The 4.5 V to 5.5 V supply requirement also means that the power source and all attached I/O devices must remain within compatible voltage levels. A 5 V supply with suitable local decoupling is the straightforward baseline when designing around this controller. This product page combines the core Z86E0412PEG specifications, commercial sourcing guidance, package information, application guidance, and the available drop-in comparison. It is designed to help engineers identify the correct Z8 controller, plan programming and PCB assembly, and determine whether the directly replaceable Z86E0412PEC variant satisfies the project requirements.

RFQ تماس
Z86E0412SEG - 8-Bit 12MHz 1KB OTP MCU | Zilog
Z86E0412SEG

Z86E0412SEG - 8-Bit 12MHz 1KB OTP MCU | Zilog

Zilog Z86E0412SEG is an 8-bit Z8 microcontroller with a 12 MHz clock, 1 KB of one-time-programmable memory, 14 I/O ports, and an 18-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for operation from -40°C to +105°C. The Z86E0412SEG combines a compact OTP MCU architecture with the Z8 family’s integrated peripherals and low-cost single-chip design. What is an 8-bit microcontroller? An 8-bit microcontroller is a programmable integrated circuit containing a central processing unit, nonvolatile program memory, data memory, and input/output peripherals on one chip. The Z86E0412SEG belongs to the Z8 family of MCUs, a semiconductor subtype of embedded controller. Its OTP program memory permits a device to be programmed once during manufacturing or prototype preparation, making it practical for cost-sensitive products with stable firmware. The principal characteristics include an 8-bit processor, 12 MHz operating speed, 1 KB of OTP memory organized as 1K × 8, and 14 I/O ports. Its 4.5 V to 5.5 V operating range accommodates conventional 5 V equipment, while the -40°C to +105°C rating supports industrial environments. The 18-pin SOIC-18, 300 mil package is also identified by some listings as an 18-pin plastic DIP-family package. Z86E0412SEG is a Zilog Z8 CISC controller intended for compact embedded-control tasks. One-time-programmable storage distinguishes it from field-reprogrammable Flash MCUs, eliminating the need for nonvolatile memory that can be updated after programming. The 14 I/O ports provide external control and monitoring points, while the 12 MHz clock supports time-dependent control, debouncing, signal sequencing, and communication tasks within the device’s stated limits. Typical applications include appliance controllers, small motor or relay-control boards, industrial interface modules, lighting controllers, instrumentation peripherals, and legacy equipment upgrades. Its combination of limited memory, 14 I/O ports, and a wide temperature range is well suited to simple control systems where the application does not require large firmware images or extensive connectivity. The OTP architecture is particularly appropriate when firmware will not change after deployment. Designers should verify oscillator configuration, pin multiplexing, and programming requirements against the Zilog datasheet before committing the PCB footprint. Because OTP memory cannot be rewritten, firmware validation and device programming must be complete before production programming. Decoupling should follow the manufacturer’s recommended power-network layout, and unused inputs should be configured to avoid unnecessary current consumption. This product page consolidates the Z86E0412SEG specifications, package information, family alternatives, and application-oriented design guidance. It also identifies the practical migration limits associated with one-time-programmable memory, helping engineers distinguish true family options from MCU replacements that require software and hardware requalification.

RFQ تماس
Z86E0612PSG - 12MHz 8-Bit OTP MCU with 1KB | Zilog
Z86E0612PSG

Z86E0612PSG - 12MHz 8-Bit OTP MCU with 1KB | Zilog

The Zilog Z86E0612PSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating frequency, 1 KB of one-time-programmable program memory, and 125 bytes of RAM in an 18-pin plastic DIP package. The device includes SPI connectivity, a power-on reset, a watchdog timer, and 14 general-purpose I/O pins. Its 3 V to 5.5 V supply range supports both 3.3 V and 5 V embedded systems. An 8-bit microcontroller is a compact processor architecture intended for control-oriented products in which modest computational performance, deterministic peripheral access, and low system complexity are more important than high bandwidth. The Z8 family combines the processor core, nonvolatile program memory, RAM, I/O, timing functions, and serial communications in one integrated circuit, reducing the component count required for embedded control, appliance control, industrial interfaces, and compact consumer products. The Z86E0612PSG centers on a Z8 CPU operating at up to 12 MHz. Its 1 KB OTP program memory is intended for compact control code that can be programmed once during manufacturing. The 125-byte RAM provides working storage for variables, state machines, and communication buffers. Fourteen I/O pins allow the device to operate as the central controller for digital inputs, outputs, indicators, and external interface signals. Communication and system-control peripherals broaden the device beyond simple GPIO control. The integrated SPI interface supports synchronous serial communication with sensors, displays, memories, and other SPI-compatible peripherals. A power-on reset establishes a known startup state, while the watchdog timer helps recover operation after a software fault. Together, these resources make the MCU appropriate for compact products whose firmware must remain small and whose board area is constrained. Typical applications include appliance control, simple sensor-hub controllers, LED and display interfaces, industrial control modules, access-control equipment, and compact embedded products. The 12 MHz operating speed provides useful responsiveness for interrupt-driven control loops, while the 1 KB memory limit strongly favors event-driven firmware, state-machine architecture, and code reuse. The 18-pin DIP package also facilitates prototyping and straightforward through-hole assembly. PCB planning should preserve access to the SPI interface, I/O pins, reset behavior, and programming or test points. Because program memory is OTP, firmware validation and production programming must occur before the component reaches the end customer. Developers should also budget for decoupling close to the supply pins and verify all external serial-device logic levels against the 3 V to 5.5 V operating range. This page consolidates the Z86E0612PSG electrical identity, package details, drop-in replacement candidates, application guidance, and design considerations into an engineering-focused reference. It supports part selection and board planning while helping teams distinguish confirmed device characteristics from parameters that still require confirmation from the manufacturer datasheet.

RFQ تماس
Z86E0612SSG - 8-Bit 12MHz 1KB OTP MCU | Zilog | Embedded Control
Z86E0612SSG

Z86E0612SSG - 8-Bit 12MHz 1KB OTP MCU | Zilog | Embedded Control

The Zilog Z86E0612SSG is an 8-bit Z8 microcontroller with a 12 MHz operating frequency, 1 KB of one-time-programmable program memory, and 124 bytes of RAM in an 18-pin SOIC package. It includes SPI connectivity, Power-On Reset, and a Watchdog Timer, making it suitable for compact embedded control, communication, and peripheral-control designs. An 8-bit microcontroller is a programmable semiconductor that integrates a central processing unit, memory, and peripherals into one device. The Z8 core follows the broader hierarchy of microcontroller, embedded processor, processor, and semiconductor. Compared with a general-purpose processor, this device targets smaller control systems where compact code and memory, deterministic peripheral control, and low system complexity are more important than application-processor performance. The Z86E0612SSG's principal features are its 12 MHz operating frequency, 1 KB OTP program memory, 124-byte RAM, SPI interface, Power-On Reset, and Watchdog Timer. The 1 KB OTP architecture suits final-production programs that do not require repeated field reprogramming. SPI provides a compact serial path for sensors, display controllers, memory devices, and other peripherals, while the Watchdog Timer supports recovery from unexpected program stalls. Its Z8 core is implemented as an 8-bit CISC microcontroller. Program execution, data storage, and peripheral interaction are integrated into one device, reducing the number of external components required for a small embedded controller. The 124-byte RAM provides working memory for variables and stack operations, while the OTP program memory imposes a fixed one-time programming constraint that should be considered before committing the device to a production design. Typical applications include small sensor-interface controllers, SPI peripheral hubs, industrial control modules, appliance control boards, and compact communication equipment. In these systems, the MCU can supervise a sensor or actuator, exchange data through SPI, and use its reset and watchdog functions to support stable operation after power application or a firmware fault. Design the power rail and signal paths around the manufacturer's electrical limits, and place the required bypass capacitors close to the supply pins. Because program memory is OTP, validate the complete firmware image and programming sequence during production testing. Confirm the exact pin functions, input thresholds, timing limits, and clock requirements in the Zilog manufacturer datasheet before releasing the PCB layout. This page consolidates the core Z86E0612SSG specifications, sourcing guidance, replacement considerations, and practical implementation notes into an engineering-focused resource that supports faster design review and production planning.

RFQ تماس
Z86E0812PEC - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E0812PEC

Z86E0812PEC - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E0812PEC is an 8-bit Z8 CMOS OTP microcontroller operating at up to 12 MHz, with 2 KB of one-time-programmable memory organized as 2K x 8. The device is packaged in an 18-pin PDIP format and is identified as an industrial-temperature grade. Its combination of a compact 8-bit architecture, embedded program memory, and a 12 MHz clock makes it suitable for cost-sensitive embedded control systems that require deterministic control logic without an external programmable-memory device. An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and embedded control peripherals. The Z8 product family targets cost-sensitive, high-volume applications in consumer equipment, automotive products, security equipment, and HVAC systems. In this hierarchy, the Z86E0812PEC is an MCU, embedded microcontroller, Z8-family processor, and CMOS semiconductor optimized for small control products rather than general-purpose computing. The principal device parameters are a maximum clock frequency of 12 MHz, 2 KB of OTP program memory, an 8-bit CPU, and an 18-pin PDIP package. One-time-programmable memory allows the application program to be fixed during manufacturing, which simplifies production for products whose firmware and configuration do not require field updates. The same 12 MHz and 2K x 8 memory configuration shown for the Z86E0812PEC appears in listings for the related Z86E0812PEG device, making that part a relevant footprint-level comparison. The Z8 CPU architecture provides a compact implementation for embedded control tasks. The device can be evaluated as a general-purpose controller for products needing digital status inputs, actuator outputs, timing functions, and product-specific sequencing. Because the program memory is one-time programmable, firmware becomes part of the product definition at manufacturing, and later changes normally require a new programmed device rather than an in-circuit memory update. Typical uses include security-system controllers, HVAC control boards, consumer appliances, automotive accessories, and other embedded products with modest logic requirements. The 12 MHz operating rate provides a practical balance between control responsiveness and system simplicity, while the 2 KB OTP capacity favors compact firmware focused on the product's primary state machine and peripheral routines. Package size and through-hole construction may also suit assembled control modules where leaded components are preferred. Designers should confirm the complete pin assignment, peripheral configuration, clock requirements, reset behavior, and electrical limits in the manufacturer datasheet before layout. Because the device uses OTP memory, production programming and revision control should be coordinated with firmware approval. Confirming the exact package suffix is also important: the available comparison identifies Z86E0812PEG as an 18-DIP replacement candidate with matching main performance characteristics and consistent terminals. This page combines the verified Z86E0812PEC identity and listing data with a focused drop-in comparison, package information, technical FAQs, and practical selection guidance. It helps engineers distinguish the target device from a close same-family alternative while highlighting the attributes that must still be checked before approving a replacement in production hardware.

RFQ تماس
Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E0812PEG

Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E0812PEG is an 8-bit Z8 microcontroller operating at up to 12 MHz, with 2 KB of one-time-programmable memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin PDIP package. It is designed for compact embedded-control systems requiring straightforward 8-bit processing, dedicated I/O, and firmware retention without a separate external memory device. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, I/O ports, and supporting peripherals on one integrated circuit. The Zilog Z8 family belongs to the broader embedded-controller hierarchy that includes microcontrollers, embedded processors, and semiconductors. Compared with a general-purpose processor, this device targets smaller control loops where cost, simplicity, deterministic peripheral access, and board area are more important than complex computation or high memory bandwidth. Key verified specifications include a 12 MHz maximum clock speed, 2 KB of OTP program memory, 14 I/O ports, and a 4.5 V to 5.5 V operating supply range. Its operating temperature spans -40°C to +105°C, making it suitable for industrial-temperature equipment when the associated system design and qualification requirements are satisfied. The RoHS designation identifies the part as compliant with the supplied RoHS listing, while other regulatory classifications remain unconfirmed in the available data. The device uses the Z8 architecture described in the available product listings as an eZ8 CISC microcontroller. One-time-programmable memory is intended for firmware that does not require later field rewriting, helping control production complexity when the final program is known before deployment. The 14 I/O pins provide interfaces for digital inputs, output control, or mixed peripheral functions, while the 18-pin PDIP format supports conventional through-hole assembly and prototyping. Typical applications include small industrial controllers, sensor-interface modules, building-control products, appliance-control boards, and compact embedded instruments. The 12 MHz clock is appropriate for moderate-speed digital sequencing, while the 14 available I/O ports can connect switches, indicators, relays, and discrete sensing components. Because the part has 2 KB of OTP rather than large RAM or Flash, firmware should be sized carefully and peripheral-heavy tasks delegated to dedicated devices when necessary. The primary design consideration is validating the exact pin assignments, oscillator requirements, reset behavior, and programming procedure against the official manufacturer documentation before layout release. Designers should also confirm current consumption and timing behavior for the selected external clock and operating conditions, because those values were not established by the supplied verification data. DIP packaging requires adequate insertion clearance, mechanical support, and protection from electrostatic discharge during handling. This product page consolidates verified distributor specifications, lifecycle information, package details, commercial availability links, and practical application guidance. It also distinguishes verified Zilog family drop-in options from unverified cross-brand replacements so engineers can make a sourcing decision without treating general cross-reference tools as proof of pin and firmware compatibility.

RFQ تماس
Z86E0812SEC - 8-Bit 12MHz 2KB OTP MCU | Zilog
Z86E0812SEC

Z86E0812SEC - 8-Bit 12MHz 2KB OTP MCU | Zilog

Zilog Z86E0812SEC is an 8-bit Z8 OTP microcontroller with a 12 MHz maximum operating frequency, 2 KB of one-time-programmable program memory organized as 2K x 8, and an 18-pin SOIC package. The Z86 family is designed for compact embedded-control systems where a low-cost, OTP-based architecture provides sufficient program storage for control logic, peripheral coordination, and simple user interfaces. An OTP microcontroller is a type of embedded-control semiconductor that combines a CPU, nonvolatile program memory, digital I/O, timers, and communication peripherals on one integrated circuit. Its hierarchy extends from the Z86 OTP microcontroller to the broader categories of 8-bit microcontroller, embedded processor, and system-on-chip. Unlike devices with mask-programmed ROM, the Z86E0812SEC allows its program memory to be written during manufacturing or final programming, which supports configuration-specific firmware without requiring mask changes. The principal operating specifications are a maximum clock frequency of 12 MHz, 2 KB of OTP program memory, and an 8-bit CPU architecture. The 18-pin SOIC package provides a surface-mount footprint suitable for compact control assemblies. These characteristics make the device appropriate for applications requiring modest processing capacity and several digital interfaces rather than high-speed control, large data storage, or sophisticated graphics. The Z86E0812 device family is built around an 8-bit microcontroller architecture and OTP program memory. Its small program-memory capacity favors compact, deterministic firmware with tightly bounded tasks. This limitation should be considered when selecting the device for data logging, graphical interfaces, protocol stacks requiring large buffers, or applications that need to retain changing parameters in writable nonvolatile memory. Typical uses include temperature-control instruments, small appliance controllers, industrial sensing modules, building equipment interfaces, and compact motor or actuator controllers. The 12 MHz clock permits straightforward multitasking and peripheral servicing in modest embedded systems, while the 2 KB OTP region is sufficient for short control routines and fixed configuration logic. The 18-pin SOIC package also simplifies assembly where through-hole or larger-footprint packages would be undesirable. Before finalizing a circuit, use the manufacturer pin-description table to assign signals and confirm oscillator, reset, I/O, and programming connections. Check the exact temperature variant and every operating limit against the Zilog Z86E0812 family documentation. The Suffix C ordering code identifies the extended-temperature product, but the complete operating-temperature limits and absolute maximum ratings should be taken directly from the family datasheet. This product page combines the confirmed Z86E0812SEC identity, memory, clock, architecture, and package information with engineering-oriented application guidance, selection criteria, and a documented drop-in comparison. It also distinguishes the confirmed same-package family alternative from cross-package options so engineers can focus first on designs that preserve the existing PCB footprint.

RFQ تماس
Z86E0812SEG - 8-Bit 12MHz 2KB OTP MCU | Zilog
Z86E0812SEG

Z86E0812SEG - 8-Bit 12MHz 2KB OTP MCU | Zilog

The Zilog Z86E0812SEG is an 8-bit Z8 OTP microcontroller operating at 12 MHz with 2 KB of one-time-programmable program memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin SOIC package. It is intended for compact embedded-control products where economical one-time programming, deterministic peripheral control, and a small package are useful. The Z86E0812SEG is listed as active by the supplied datasheet listing and is positioned for low-volume, cost-sensitive controller designs. An OTP microcontroller is a single-chip embedded controller whose program memory is written once during manufacturing or provisioning. It belongs to the Z8 family and the broader microcontroller hierarchy that includes general-purpose MCUs, embedded controllers, ROM devices, and flash-memory devices. Unlike a flash MCU, the OTP architecture eliminates repeated in-circuit programming, which can simplify production tooling while fixing the installed firmware permanently. Applications must therefore treat programming as a manufacturing step rather than a field-update mechanism. The three principal selection parameters are the 12 MHz operating clock, 2 KB of OTP program memory, and 4.5 V to 5.5 V operating supply. The device also provides 14 I/O ports, making it suitable for compact products that read sensors, operate indicators, drive logic-level peripherals, and perform basic sequencing. Its 8-bit architecture and 18-pin SOIC form factor support space-constrained boards where a larger microcontroller package would be unnecessary. The Z8 family provides an established platform for embedded-control applications, but the supplied excerpts do not expose detailed timer, serial-interface, oscillator, or electrical-limit tables. The part should therefore be selected using the complete Zilog datasheet rather than inferred from the distributor summaries. In particular, engineers should confirm oscillator connection requirements, reset behavior, I/O drive limits, and programming procedure before committing a PCB or production fixture to this device. Typical uses include simple appliance controllers, building-control modules, industrial interface boards, LED sequencing systems, instrumentation front ends, and small motor or relay-control products. A 5 V supply keeps the device compatible with conventional embedded logic, while the limited 2 KB program memory favors compact control loops, state machines, and dedicated peripheral handling rather than general-purpose applications requiring extensive firmware storage. The primary design consideration is OTP irreversibility. Firmware must be thoroughly validated before programming because later corrections normally require a new programmed device rather than an in-circuit reflash. Board designers should also follow the datasheet's recommended bypass-capacitor and clock-network arrangements, and production engineers should build programming, test, and traceability steps into the manufacturing process. This page consolidates the verified distributor specifications, package information, sourcing links, alternative-family comparison, and practical OTP design considerations. It also distinguishes confirmed data from parameters that still require verification from the complete manufacturer datasheet, helping engineers make a defensible decision before committing the Z86E0812SEG to a design.

RFQ تماس
Z86E1505PSC - 8-Bit 5MHz OTP Keyboard Controller | Zilog
Z86E1505PSC

Z86E1505PSC - 8-Bit 5MHz OTP Keyboard Controller | Zilog

The Zilog, Inc. Z86E1505PSC is an 8-bit Z8 keyboard-controller microcontroller operating at 5 MHz, with 4 KB of One-Time Programmable program memory, 188 bytes of RAM, and 32 programmable I/O pins in a 40-pin DIP package. The device also integrates programmable LED drivers, a Power-On Reset circuit, and a Watchdog Timer for compact and dependable keyboard-scanning designs. An OTP keyboard controller is a specialized microcontroller that scans switch inputs, applies debouncing and logic functions, drives indicator LEDs, and communicates with a host controller. It belongs to the hierarchy of 8-bit MCU, microcontroller, embedded controller, and semiconductor. The Z8 architecture combines straightforward firmware execution with dedicated keyboard-oriented peripherals, reducing external logic and simplifying layouts for wired or embedded human-interface devices. The principal advantages of the Z86E1505PSC are its 5 MHz operating speed, 4K by 8 OTP program-memory organization, 188-byte RAM, and 32 programmable I/O lines. OTP memory is suitable for products whose firmware is finalized before deployment because it cannot be electrically rewritten in the field. The Watchdog Timer and Power-On Reset support dependable recovery and controlled startup, while the integrated LED drivers reduce the component count needed for status indication. Externally, the device uses an external oscillator and provides the interface resources required for matrix-based keyboard scanning. Its 40-pin DIP package is easy to prototype, inspect, and service on through-hole industrial or educational assemblies. Unlike a general-purpose MCU that would require external LED drivers and additional reset support, this controller concentrates those functions in one device, allowing a smaller bill of materials and more direct keyboard firmware. Typical uses include computer keyboards, keypad readers, access-control panels, laboratory control panels, and compact industrial keypads. It is particularly appropriate when a fixed function can be programmed once, the application needs deterministic key scanning and status indication, and through-hole construction is preferred for maintainability. Its 188-byte RAM provides working space for scan state, debounce counters, communication buffers, and configuration variables. Designers should verify the oscillator requirements, key-scan architecture, and host-interface levels against the manufacturer datasheet before finalizing the PCB. Because program memory is one-time programmable, validate firmware and keyboard layouts thoroughly before production programming. Confirm all 40 package connections against the pin-description table rather than relying on general DIP numbering assumptions. This product overview combines the controller's core memory, timing, I/O, and package characteristics with practical guidance for keyboard hardware. It also distinguishes verified functions from details requiring confirmation, helping engineers plan sourcing, firmware validation, PCB routing, and production programming without overlooking the architectural limits of an OTP MCU.

RFQ تماس
Z86E2112FSC - 8-Bit 12MHz OTP MCU with UART | Zilog
Z86E2112FSC

Z86E2112FSC - 8-Bit 12MHz OTP MCU with UART | Zilog

The Zilog Z86E2112FSC is an 8-bit Z8 microcontroller rated for operation up to 12 MHz, with 8 KB of one-time-programmable memory, 236 bytes of RAM, 32 I/O pins, and UART communications in a 44-pin LQFP package. It is designed for compact embedded-control tasks that require deterministic serial communication and a small, surface-mount footprint. An 8-bit microcontroller is an embedded-processing IC that integrates a processor core, nonvolatile program memory, data memory, I/O ports, and communication peripherals into one package. The Z86E2112FSC belongs to the Z8 family, where the MCU sits within the broader hierarchy of embedded controllers, semiconductor devices, and programmable control systems. Its one-time-programmable architecture allows application firmware to be permanently written into the device for production control. The Z86E2112FSC combines a 12 MHz maximum clock with 8 KB of OTP program memory and a hardware UART. The UART supports communications with host computers, sensors, human-interface modules, and other embedded controllers without requiring a separate serial-interface IC. The 32 I/O pins provide a practical interface capacity for logic inputs, output control, and external peripheral connections when the complete pin-assignment table and electrical limits are followed. This part operates from a nominal 5.00 V supply with a listed maximum of 5.50 V. That supply range makes a regulated 5 V rail the natural operating environment. Clock-sensitive and UART-connected circuits should use suitable bypassing, controlled rise times, and signal levels compatible with the device's documented electrical characteristics. Because its program memory is OTP rather than reprogrammable Flash, firmware changes require a new programmed device. Typical uses include compact serial controllers, appliance interfaces, industrial modules, instrumentation, lighting controls, and embedded communication equipment. The 44-pin LQFP package offers enough connections for mixed digital I/O and serial functions while remaining compatible with conventional surface-mount assembly. Designs must observe the manufacturer’s pin and electrical requirements when assigning multiplexing functions. For a new PCB, the most important design decision is preserving the exact 44-pin footprint and validating the selected oscillator, reset, supply, and UART implementation against the manufacturer datasheet. For an existing assembly, verify package suffix, temperature grade, supply voltage, firmware memory, and all peripheral assignments before considering substitution. This page combines the device’s core operating specifications with sourcing guidance, drop-in replacement analysis, package considerations, and application-oriented design notes. It is intended to help engineers determine whether the Z86E2112FSC matches the required memory, clock, I/O, serial-interface, supply, and package constraints without overlooking OTP-programming limitations.

RFQ تماس
Z86E2112PSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E2112PSC

Z86E2112PSC - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z86E2112PSC is an 8-bit CISC microcontroller operating at up to 12 MHz, with 8 KB of one-time-programmable memory and UART communication capability in a 40-pin PDIP package. Its 5 V supply operation and compact embedded-control architecture suit applications that require deterministic serial control, keypad or switch input handling, and general-purpose logic without an external memory interface. An 8-bit microcontroller is a compact processing component designed for embedded control. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Compared with a field-programmable controller, one-time-programmable memory is written during manufacturing or provisioning and cannot be rewritten afterward. This makes the Z86E2112PSC appropriate for products whose firmware is fixed and whose production configuration benefits from reduced update complexity. The principal device characteristics are an 8-bit CPU, a 12 MHz maximum clock, 8 KB of OTP program memory, 5 V operation, and a 40-pin PDIP package. The listed memory organization is 8K x 8 bits, matching one byte for each of the 8,192 program-memory locations. UART capability provides a practical interface for host controllers, debug equipment, programmable controllers, and service equipment. The CISC architecture favors compact, straightforward instruction handling and is well matched to cost-sensitive embedded products. Because the program memory is one-time programmable, firmware changes require a new programmed device rather than a field update. The 12 MHz operating ceiling also gives designers a clear timing basis when selecting oscillator components, communication baud rates, and interrupt-service routines. Typical uses include serial control panels, industrial operator interfaces, building-control terminals, appliance controllers, programmable logic controllers, and compact test fixtures. In each case, the MCU can coordinate inputs and outputs while the UART provides a defined path for commands or status information. The 40-pin PDIP package also simplifies prototype construction and through-hole inspection where a socket is acceptable. Before finalizing a PCB design, assign every physical pin by consulting the manufacturer's pin-description table and confirm the oscillator, reset, and I/O requirements for the selected firmware configuration. Because OTP memory cannot be corrected after programming, complete the code and programming procedure before committing devices to production. This page consolidates the device identity, package information, memory capacity, clock rate, UART feature, sourcing workflow, and engineering considerations into a compact reference for designers evaluating the Z86E2112PSC.

RFQ تماس
Z86E2112VSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E2112VSC

Z86E2112VSC - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z86E2112VSC is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz, with 8 KB of one-time-programmable program memory, 236 bytes of RAM, and UART/USART connectivity in a 44-pin PLCC package. Its 4.5 V to 5.5 V supply range and 32 I/O ports suit compact embedded-control products requiring deterministic serial communication and nonvolatile programmed control logic. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a processor architecture designed around an 8-bit data bus. The Z8 family combines a compact controller core, embedded memory, serial interfaces, and general-purpose I/O in one integrated circuit. Z86E2112VSC belongs to the broader hierarchy of 8-bit MCU, embedded microcontroller, programmable controller, and semiconductor, making it suitable for small control systems that do not require a high-performance 32-bit processor. The principal features include a 12 MHz maximum clock speed, 8 KB of OTP program memory, 236 x 8 bytes of RAM, and 32 I/O ports. OTP memory allows firmware to be programmed once after manufacturing, which is useful for production products whose control program is fixed and does not require field updates. The UART/USART interface enables serial communication with sensors, human-interface controllers, data-collection equipment, or another embedded controller. The Z8 architecture integrates the processor core, program storage, data RAM, I/O, timers, and serial-interface functions on a single CMOS device. Operating from a 4.5 V to 5.5 V supply provides a conventional 5 V embedded-control environment. Because the program memory is OTP rather than mask-programmable ROM alone, the same commercial device can be programmed for different production configurations after assembly, subject to the one-time programming constraint. Typical applications include industrial control panels, serial instrumentation, appliance controllers, communication interfaces, embedded timers, and compact peripheral controllers. Its 44-pin PLCC package provides 32 I/O pins for external signals, while the 12 MHz clock rate supports responsive polling, debouncing, state-machine execution, and UART protocol handling. The relatively broad I/O count is particularly useful when a design needs multiple digital inputs and outputs around one controller. Designers should treat OTP programming as a one-time production operation and protect the programming interface from unintended access after programming. Place the device's decoupling capacitor close to its supply pins, route clock and serial signals away from noisy switching nodes, and confirm the complete 44-pin PLCC footprint and pin assignments against the manufacturer datasheet before layout release. The PLCC package also requires attention to solder-joint geometry and thermal performance during assembly.

RFQ تماس
Z86E2116FSC - 16MHz 8KB OTP 8-Bit MCU | Zilog
Z86E2116FSC

Z86E2116FSC - 16MHz 8KB OTP 8-Bit MCU | Zilog

The Zilog Z86E2116FSC is an 8-bit Z8 CMOS OTP microcontroller operating at 16 MHz with 8 KB of one-time-programmable memory and UART capability, housed in a 44-pin QFP package. It combines a compact embedded-control footprint with dedicated serial communications, making it suitable for appliance controls, industrial interfaces, and compact embedded systems. An 8-bit microcontroller is a microprocessor optimized for embedded control tasks such as reading sensors, operating relays, driving displays, and managing communication peripherals. The Z86E2116FSC belongs to the Z8 family of CMOS application-specific controllers, where the CPU, memory, timers, I/O, and communication functions are integrated into one device. Its 8 KB OTP program memory supports a fixed application program, while its 16 MHz operating speed provides the timing required for common control-loop and serial-interface tasks. The principal features include an 8-bit processor core, 8 KB OTP program memory, 16 MHz clock operation, UART support, and a 44-pin QFP package. The UART allows the controller to exchange formatted serial data with sensors, programmers, modules, or supervisory electronics. OTP memory also gives a production design a stable, programmed configuration without an external writable program-memory component. Technical selection should focus on whether the required peripherals, voltage range, clock configuration, and interrupt architecture are sufficient for the target design. Because firmware is permanently programmed after device programming, prototype changes require a different programmed MCU rather than a routine field update. Engineers should also verify oscillator, reset, I/O, and serial-interface requirements against the manufacturer datasheet before schematic capture. Typical uses include compact appliance controllers, serial-interface modules, keypad and display products, industrial control boards, and embedded peripheral control. In these systems, the MCU can supervise inputs, execute control logic, and manage UART communication while keeping the footprint within a 44-pin surface-mount package. PCB design should preserve access to every programming and test signal, maintain adequate copper around ground and power pins, and follow the datasheet's recommended decoupling layout. Because OTP programming is a one-time manufacturing operation, production traceability and device marking should be designed into the process, while firmware changes should be accommodated by maintaining a replaceable MCU footprint. This product page consolidates the confirmed 8-bit, 16 MHz, 8 KB OTP, UART, and 44-QFP characteristics with package guidance, sourcing information, design notes, and a qualified comparison framework. It is intended to help engineers verify functionality and manufacturing readiness without treating a family member as a drop-in substitute without further engineering review.

RFQ تماس
Z86E2116PSC - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E2116PSC

Z86E2116PSC - 8-Bit 16MHz OTP Microcontroller | Zilog

Zilog Z86E2116PSC is an 8-bit CMOS Z8 microcontroller with a 16 MHz operating frequency, 8 KB one-time-programmable memory, 236 bytes of RAM, and a 40-pin through-hole DIP package. The device provides 32 I/O lines, two 8-bit timers, and a UART communication interface for compact embedded-control designs. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral functions on one device. The Z86E2116PSC belongs to the Z8 family and operates as an embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its one-time-programmable architecture is intended for products where firmware is finalized during manufacturing and field programming is unnecessary. The principal features include an 8-bit CPU operating at 12 MHz or 16 MHz, 8 KB of ROM or program memory, 236 bytes of RAM, 32 I/O pins, two 8-bit timer/counter blocks, and UART communications. These resources allow a designer to combine serial data handling, timed control functions, and discrete digital input and output within one integrated circuit. The Z86E2116PSC is identified as a CMOS Z8 OTP microcontroller. Its 40-DIP construction supports conventional through-hole PCB assembly and prototyping, while the 0°C to 70°C operating range places it in the commercial temperature class. The 236-byte RAM and 32 available I/O lines provide practical working space for compact appliance controls, industrial automation equipment, and embedded peripheral controllers. Typical uses include keypad and user-interface controllers, small motor-control boards, instrumentation peripherals, serial interface adapters, and simple industrial automation modules. The UART is particularly useful for connecting the controller to sensors, displays, data converters, or host systems, while the two timers support periodic measurement, timing, and output-control tasks. PCB design should follow the manufacturer's 40-pin pin-description table and recommended decoupling guidance. Because the program memory is one-time programmable, firmware validation and device programming must be completed before the MCU enters the finished assembly. Prototype builds should also account for the through-hole footprint and commercial temperature limits rather than treating it as a modern fine-pitch surface-mount design. This page combines the verified device identity, package information, memory configuration, timing characteristics, and interface details with practical application guidance. It also separates confirmed specifications from missing electrical and pin-level parameters so engineers can obtain the manufacturer datasheet before finalizing a high-voltage, timing-critical, or production-programming design.

RFQ تماس