ADC0832CCN vs ADC0820BCV مقایسه
مقایسه دقیق کنار به کنار ADC0832CCN توسط Texas Instruments و ADC0820BCV توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
ADC0832CCN - 8-Bit 2-Ch SAR ADC, MICROWIRE Serial, 8-PDIP | TI
ADC0832CCN ⚠ آخرین فرصت خریدTexas Instruments
ADC0820BCV - 8-Bit 666kSPS Half-Flash ADC w/ T/H | Texas Instruments
ADC0820BCV Obsoleteمقایسه مشخصات
| پارامتر | ADC0832CCN | ADC0820BCV |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | ADC/DAC | ADC/DAC |
| وضعیت چرخه عمر | آخرین فرصت خرید | Obsolete |
| رزولوشن | 8 bit | — |
| Number of Analog Input Channels | 2 (1 single-ended, 1 differential) | — |
| Architecture | SAR (Successive Approximation) | Half-Flash (Sub-Ranging) with Track-and-Hold |
| نرخ نمونه‌برداری | 31 ksps | — |
| Data Interface | NSC MICROWIRE-compatible Serial (SPI-compatible, mode 0) | Parallel |
| ولتاژ تغذیه | 4.5 V to 6.3 V (single supply) | — |
| جریان تغذیه | typ. [DATA_NEEDED: supply current] | — |
| ولتاژ مرجع | External, applied to VREF pin | — |
| Integral Nonlinearity (INL) | [DATA_NEEDED: INL] | — |
| Differential Nonlinearity (DNL) | [DATA_NEEDED: DNL] | — |
| دمای کاری | 0 C to 70 C | 0 °C to +70 °C |
| بسته‌بندی | 8-PDIP (0.300 inch, 7.62 mm) | 20-PLCC (J-Lead, 9x9 mm) |
| نوع نصب | Through-Hole | Surface Mount |
| سطح MSL | 1 (unlimited) | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | — |
| Lead Free | Contains lead (legacy through-hole) | — |
| Number of Bits | — | 8 |
| Sampling Rate (Per Second) | — | 667 kSPS |
| Number of Inputs | — | 1 |
| Input Type | — | Single-Ended (Pseudo-Differential option per datasheet) |
| Analog Input Range | — | 0 V to 5 V |
| Conversion Time | — | 1.5 µs typical |
| Number of Comparators (internal) | — | 31 |
| Voltage Supply | — | 4.5 V to 5.5 V (single 5 V) |
| Power Dissipation | — | 75 mW max |
| نوع خروجی | — | Three-State Latched Parallel |
| Overflow Output | — | Yes (cascadable for higher resolution) |
| Zero/Full-Scale Adjust | — | Not required |