ATMEGA165P-16MNR vs ATMEGA164PA-MNR مقایسه
مقایسه دقیق کنار به کنار ATMEGA165P-16MNR توسط Microchip Technology و ATMEGA164PA-MNR توسط Microchip Technology. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Microchip Technology
ATMEGA165P-16MNR - AVR 8-Bit MCU 16KB Flash 16MHz | Microchip
ATMEGA165P-16MNR ✓ فعالMicrochip Technology
ATMEGA164PA-MNR - 8-bit AVR MCU 16KB Flash 20MHz | Microchip
ATMEGA164PA-MNR ✓ فعالمقایسه مشخصات
| پارامتر | ATMEGA165P-16MNR | ATMEGA164PA-MNR |
|---|---|---|
| برند | Microchip Technology | Microchip Technology |
| دسته‌بندی | Microcontrollers | Microcontrollers |
| وضعیت چرخه عمر | فعال | فعال |
| Core Processor | AVR | — |
| Core Size | 8-Bit | — |
| Speed | 16 MHz | — |
| Flash Memory | 16 KB (8K x 16) | 16 KB (8K x 16) ISP flash, read-while-write |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| General Purpose I/O | 53 | — |
| Working Registers | 32 | 32 x 8-bit general purpose |
| Instructions | 131 (most single-cycle) | — |
| Throughput | Up to 16 MIPS at 16 MHz | — |
| JTAG Interface | Yes (boundary-scan, on-chip debug, programming) | — |
| ولتاژ تغذیه | 3.3 V / 5 V (per FindIC listing) | — |
| دمای کاری | up to 105C (per Mouser listing) | — |
| بسته‌بندی | 64-QFN (MLF, 9x9 mm) exposed pad | 44-VQFN (7x7 mm) exposed pad |
| نوع نصب | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (R suffix) | Tape & Reel (T/R) |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | Compliant (GRN / green per Mouser) |
| Timers | Three flexible Timer/Counters (per datasheet summary) | 3 timer/counters with compare modes and PWM |
| Core Architecture | — | AVR enhanced RISC, 8-bit |
| Max Clock Frequency | — | 20 MHz |
| I/O Lines | — | 32 general purpose I/O |
| USART | — | 2 |
| Serial Interfaces | — | Two-Wire (I2C), SPI |
| ADC | — | 8-channel 10-bit |
| Operating Voltage | — | 2.5 V / 3.3 V / 5 V |
| Low Power Technology | — | picoPower |
| Programming | — | ISP, IAP; debugWire/ICSP via reset line |