BTS6133DAUMA1 vs BTS3110NHUMA1 مقایسه
مقایسه دقیق کنار به کنار BTS6133DAUMA1 توسط Infineon و BTS3110NHUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BTS6133DAUMA1 | BTS3110NHUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| تعداد خروجی‌ها | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| بسته‌بندی | PG-TO252-5-11 (DPAK-5) | PG-SOT223-4 (SOT-223-4) |
| تعداد پایه | 5 | — |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40C to +150C | -40 C to +150 C |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | ESD, thermal shutdown, over-load current limit |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| سطح MSL | 3 (per JEDEC J-STD-020, typical for DPAK) | [DATA_NEEDED: MSL level] |
| وضعیت RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Family | — | Classic HITFET |
| Number of Channels | — | 1 |
| Switch Type | — | N-Channel (1:1) |
| Maximum Drain-to-Source Voltage (VDS max) | — | 42 V |
| Continuous Drain Current | — | 1.4 A |
| On-Resistance (RDS(on) typ) | — | 200 mOhm |
| Input Logic Compatibility | — | TTL / CMOS (3.3 V and 5 V) |
| On-State Input Voltage (VIH) | — | [DATA_NEEDED: VIH value] |
| Off-State Input Voltage (VIL) | — | [DATA_NEEDED: VIL value] |
| Status Flag Output | — | Open-drain diagnostic output |
| Automotive Qualified | — | Yes - 12 V automotive applications |